[go: up one dir, main page]

In geometry, a decagon (from the Greek δέκα déka and γωνία gonía, "ten angles") is a ten-sided polygon or 10-gon.[1] The total sum of the interior angles of a simple decagon is 1440°.

Regular decagon
A regular decagon
TypeRegular polygon
Edges and vertices10
Schläfli symbol{10}, t{5}
Coxeter–Dynkin diagrams
Symmetry groupDihedral (D10), order 2×10
Internal angle (degrees)144°
PropertiesConvex, cyclic, equilateral, isogonal, isotoxal
Dual polygonSelf

Regular decagon

edit

A regular decagon has all sides of equal length and each internal angle will always be equal to 144°.[1] Its Schläfli symbol is {10} [2] and can also be constructed as a truncated pentagon, t{5}, a quasiregular decagon alternating two types of edges.

Decagons often appear in tilings with (partial) 5-fold symmetry. The images show an Islamic geometric pattern (15th century), an illustration in Kepler's Harmonices Mundi (1619) and a Penrose tiling.

Side length

edit
 

The picture shows a regular decagon with side length   and radius   of the circumscribed circle.

  • The triangle   has two equally long legs with length   and a base with length  
  • The circle around   with radius   intersects   in a point   (not designated in the picture).
  • Now the triangle   is an isosceles triangle with vertex   and with base angles  .
  • Therefore  . So   and hence   is also an isosceles triangle with vertex  . The length of its legs is  , so the length of   is  .
  • The isosceles triangles   and   have equal angles of 36° at the vertex, and so they are similar, hence:  
  • Multiplication with the denominators   leads to the quadratic equation:  
  • This equation for the side length   has one positive solution:  

So the regular decagon can be constructed with ruler and compass.

Further conclusions

  and the base height of   (i.e. the length of  ) is   and the triangle has the area:  .

Area

edit

The area of a regular decagon of side length a is given by:[3]

 

In terms of the apothem r (see also inscribed figure), the area is:

 

In terms of the circumradius R, the area is:

 

An alternative formula is   where d is the distance between parallel sides, or the height when the decagon stands on one side as base, or the diameter of the decagon's inscribed circle. By simple trigonometry,

 

and it can be written algebraically as

 

Construction

edit

As 10 = 2 × 5, a power of two times a Fermat prime, it follows that a regular decagon is constructible using compass and straightedge, or by an edge-bisection of a regular pentagon.[4]

Construction of decagon
Construction of pentagon

An alternative (but similar) method is as follows:

  1. Construct a pentagon in a circle by one of the methods shown in constructing a pentagon.
  2. Extend a line from each vertex of the pentagon through the center of the circle to the opposite side of that same circle. Where each line cuts the circle is a vertex of the decagon.  In other words,  the image of a regular pentagon under a point reflection with respect of its center is a concentric congruent pentagon,  and the two pentagons have in total the vertices of a concentric regular decagon.
  3. The five corners of the pentagon constitute alternate corners of the decagon. Join these points to the adjacent new points to form the decagon.

The golden ratio in decagon

edit

Both in the construction with given circumcircle[5] as well as with given side length is the golden ratio dividing a line segment by exterior division the determining construction element.

  • In the construction with given circumcircle the circular arc around G with radius GE3 produces the segment AH, whose division corresponds to the golden ratio.
 
  • In the construction with given side length[6] the circular arc around D with radius DA produces the segment E10F, whose division corresponds to the golden ratio.
 
Decagon with given circumcircle,[5] animation
Decagon with a given side length,[6] animation

Symmetry

edit
 
Symmetries of a regular decagon. Vertices are colored by their symmetry positions. Blue mirrors are drawn through vertices, and purple mirrors are drawn through edges. Gyration orders are given in the center.

The regular decagon has Dih10 symmetry, order 20. There are 3 subgroup dihedral symmetries: Dih5, Dih2, and Dih1, and 4 cyclic group symmetries: Z10, Z5, Z2, and Z1.

These 8 symmetries can be seen in 10 distinct symmetries on the decagon, a larger number because the lines of reflections can either pass through vertices or edges. John Conway labels these by a letter and group order.[7] Full symmetry of the regular form is r20 and no symmetry is labeled a1. The dihedral symmetries are divided depending on whether they pass through vertices (d for diagonal) or edges (p for perpendiculars), and i when reflection lines path through both edges and vertices. Cyclic symmetries in the middle column are labeled as g for their central gyration orders.

Each subgroup symmetry allows one or more degrees of freedom for irregular forms. Only the g10 subgroup has no degrees of freedom but can be seen as directed edges.

The highest symmetry irregular decagons are d10, an isogonal decagon constructed by five mirrors which can alternate long and short edges, and p10, an isotoxal decagon, constructed with equal edge lengths, but vertices alternating two different internal angles. These two forms are duals of each other and have half the symmetry order of the regular decagon.

Dissection

edit
10-cube projection 40 rhomb dissection
         
         

Coxeter states that every zonogon (a 2m-gon whose opposite sides are parallel and of equal length) can be dissected into m(m-1)/2 parallelograms.[8] In particular this is true for regular polygons with evenly many sides, in which case the parallelograms are all rhombi. For the regular decagon, m=5, and it can be divided into 10 rhombs, with examples shown below. This decomposition can be seen as 10 of 80 faces in a Petrie polygon projection plane of the 5-cube. A dissection is based on 10 of 30 faces of the rhombic triacontahedron. The list OEISA006245 defines the number of solutions as 62, with 2 orientations for the first symmetric form, and 10 orientations for the other 6.

Regular decagon dissected into 10 rhombi
 
5-cube
     
       

Skew decagon

edit
3 regular skew zig-zag decagons
{5}#{ } {5/2}#{ } {5/3}#{ }
     
A regular skew decagon is seen as zig-zagging edges of a pentagonal antiprism, a pentagrammic antiprism, and a pentagrammic crossed-antiprism.

A skew decagon is a skew polygon with 10 vertices and edges but not existing on the same plane. The interior of such a decagon is not generally defined. A skew zig-zag decagon has vertices alternating between two parallel planes.

A regular skew decagon is vertex-transitive with equal edge lengths. In 3-dimensions it will be a zig-zag skew decagon and can be seen in the vertices and side edges of a pentagonal antiprism, pentagrammic antiprism, and pentagrammic crossed-antiprism with the same D5d, [2+,10] symmetry, order 20.

These can also be seen in these four convex polyhedra with icosahedral symmetry. The polygons on the perimeter of these projections are regular skew decagons.

Orthogonal projections of polyhedra on 5-fold axes
 
Dodecahedron
 
Icosahedron
 
Icosidodecahedron
 
Rhombic triacontahedron

Petrie polygons

edit

The regular skew decagon is the Petrie polygon for many higher-dimensional polytopes, shown in these orthogonal projections in various Coxeter planes:[9] The number of sides in the Petrie polygon is equal to the Coxeter number, h, for each symmetry family.

A9 D6 B5
 
9-simplex
 
411
 
131
 
5-orthoplex
 
5-cube

See also

edit

References

edit
  1. ^ a b Sidebotham, Thomas H. (2003), The A to Z of Mathematics: A Basic Guide, John Wiley & Sons, p. 146, ISBN 9780471461630.
  2. ^ Wenninger, Magnus J. (1974), Polyhedron Models, Cambridge University Press, p. 9, ISBN 9780521098595.
  3. ^ The elements of plane and spherical trigonometry, Society for Promoting Christian Knowledge, 1850, p. 59. Note that this source uses a as the edge length and gives the argument of the cotangent as an angle in degrees rather than in radians.
  4. ^ Ludlow, Henry H. (1904), Geometric Construction of the Regular Decagon and Pentagon Inscribed in a Circle, The Open Court Publishing Co..
  5. ^ a b Green, Henry (1861), Euclid's Plane Geometry, Books III–VI, Practically Applied, or Gradations in Euclid, Part II, London: Simpkin, Marshall,& CO., p. 116. Retrieved 10 February 2016.
  6. ^ a b Köller, Jürgen (2005), Regelmäßiges Zehneck, → 3. Section "Formeln, Ist die Seite a gegeben ..." (in German). Retrieved 10 February 2016.
  7. ^ John H. Conway, Heidi Burgiel, Chaim Goodman-Strauss, (2008) The Symmetries of Things, ISBN 978-1-56881-220-5 (Chapter 20, Generalized Schaefli symbols, Types of symmetry of a polygon pp. 275-278)
  8. ^ Coxeter, Mathematical recreations and Essays, Thirteenth edition, p.141
  9. ^ Coxeter, Regular polytopes, 12.4 Petrie polygon, pp. 223-226.
edit