Abstract
A computer model is used to predict the formation and the amount of microporosity in directionally solidified Al-4.5 wt pct Cu alloy. The model considers the interplay between so-called “solidification shrinkage” and “gas porosity” that are often thought to be two contributing and different causes of interdendritic porosity. There is an accounting of the alloy element, Cu, and of dissolved hydrogen in the solid- and liquid-phase during solidification. Consistent with thermodynamics, therefore, a prediction of forming the gas-phase in the interdendritic liquid is made. The local pressure within the interdendritic liquid is calculated by macrosegregation theory that considers the convection of the interdendritic liquid, which is driven by density variations within the mushy zone. Process variables that have been investigated include the effects of thermal gradients and solidification rate, and the effect of the concentration of hydrogen on the formation and the amount of interdendritic porosity. These calculations show that for an initial hydrogen content less than approximately 0.03 ppm, no interdendritic porosity results. For initial hydrogen contents in the range of 0.03 to 1 ppm, there is interdendritic porosity. The amount is sensitive to the thermal gradient and solidification rate; an increase in either or both of these variables decreases the amount of interdendritic porosity.
Similar content being viewed by others
References
D. E. Talbot:Inter. Metall. Rev., 1975, vol. 20, pp. 166–84.
T. S. Piwonka and M.C. Flemings:Trans. TMS-AIME, 1966, vol. 236, pp. 1157–65.
M.C. Flemings:Solidification Processing, McGraw-Hill, New York, NY, 1974, pp. 234–39.
E.T. Turkdogan:Trans. TMS-AIME, 1965, vol. 233, pp. 2100–12.
D. R. Poirier, M. M. Andrews, and A. L. Maples: “Modeling Macrosegregation and Porosity in Steel Castings” inProceedings 1st International Steel Foundry Congress, J. M. Svoboda, W. M. Froelich, and S.J. Rodriquez, eds., Steel Founders’ Society of America, Des Plaines, , pp. 307-22.
K. Kubo and R. D. Pehlke:Metall. Trans. B, 1985, vol. 16B, pp 359–66.
W. R. Opie and N. J. Grant:Trans. AIME, J. Metals, 1950, vol. 188, pp. 1237–41.
J.L. Murray:Inter. Met. Rev., 1985, vol. 30, pp. 211–33.
K. P. Young and D. H. Kirkwood:Metall. Trans. A, 1975, vol. 6A, pp. 197–205.
D.G. McCartney and J.D. Hunt:Acta Metall., 1981, vol. 29, pp. 1851–63.
W. Kurz and D.J. Fisher:Fundamentals of Solidification, Trans. Tech. Publ., Aedermannsdorf, Switzerland, 1986, pp. 85–87.
W. Kurz and D. J. Fisher:Fundamentals of Solidification, Trans. Tech. Publ., Aedermannsdorf, Switzerland, 1986, pp. 88–92.
M. C. Flemings:Solidification Processing, McGraw-Hill, New York, NY, 1974, pp. 146–54.
M. C. Flemings:Solidification Processing, McGraw-Hill, New York, NY, 1974, pp. 141–43.
A. L. Maples and D. R. Poirier: “Analysis and Calculation of Macro-segregation in a Casting Ingot,” NASA-MSFC Contract No. NAS8-33573, Report No. 84HV001, General Electric Co., Huntsville, AL, 1984.
S. Ganesan and D. R. Poirier:Metall. Trans. A, 1987, vol. 18A, pp. 721–23.
H. Jacobi: “Crystallization of Steel” inInformation Symposium, Casting and Solidification of Steel, Commission of the European Communities, IPC Science and Technology Press, Ltd., Guildford, Surrey, England, 1977, vol. 1, p. 111.
A.L. Maples and D.R. Poirier:Metall. Trans. B, 1984, vol. 15B, pp. 163–72.
D. R. Poirier:Metall. Trans. B, 1987, vol. 18B, pp. 245–55.
D. R. Poirier and R. Speiser:Metall. Trans. A, 1987, vol. 18A, pp. 1156–60.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Poirier, D.R., Yeum, K. & Maples, A.L. A thermodynamic prediction for microporosity formation in aluminum-rich Al-Cu alloys. Metall Trans A 18, 1979–1987 (1987). https://doi.org/10.1007/BF02647028
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02647028