[go: up one dir, main page]
Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Letter
  • Published:

Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity

Nature volume 477, pages 443–447 (2011)Cite this article

Subjects

Abstract

Creating a robust synthetic surface that repels various liquids would have broad technological implications for areas ranging from biomedical devices and fuel transport to architecture but has proved extremely challenging1. Inspirations from natural nonwetting structures2,3,4,5,6, particularly the leaves of the lotus, have led to the development of liquid-repellent microtextured surfaces that rely on the formation of a stable air–liquid interface7,8,9. Despite over a decade of intense research, these surfaces are, however, still plagued with problems that restrict their practical applications: limited oleophobicity with high contact angle hysteresis9, failure under pressure10,11,12 and upon physical damage1,7,11, inability to self-heal and high production cost1,11. To address these challenges, here we report a strategy to create self-healing, slippery liquid-infused porous surface(s) (SLIPS) with exceptional liquid- and ice-repellency, pressure stability and enhanced optical transparency. Our approach—inspired by Nepenthes pitcher plants13—is conceptually different from the lotus effect, because we use nano/microstructured substrates to lock in place the infused lubricating fluid. We define the requirements for which the lubricant forms a stable, defect-free and inert ‘slippery’ interface. This surface outperforms its natural counterparts2,3,4,5,6 and state-of-the-art synthetic liquid-repellent surfaces8,9,14,15,16 in its capability to repel various simple and complex liquids (water, hydrocarbons, crude oil and blood), maintain low contact angle hysteresis (<2.5°), quickly restore liquid-repellency after physical damage (within 0.1–1 s), resist ice adhesion, and function at high pressures (up to about 680 atm). We show that these properties are insensitive to the precise geometry of the underlying substrate, making our approach applicable to various inexpensive, low-surface-energy structured materials (such as porous Teflon membrane). We envision that these slippery surfaces will be useful in fluid handling and transportation, optical sensing, medicine, and as self-cleaning and anti-fouling materials operating in extreme environments.

This is a preview of subscription content, access via your institution

Access options

Buy this article

  • Purchase on SpringerLink
  • Instant access to full article PDF
Buy now

Prices may be subject to local taxes which are calculated during checkout

Figure 1: Design of SLIPS.
Figure 2: Omniphobicity and high-pressure stability of SLIPS.
Figure 3: Self-healing and optical transparency of SLIPS.
Figure 4: Repellency of complex fluids, ice and insects by SLIPS.

Similar content being viewed by others

References

  1. Quéré, D. Wetting and roughness. Annu. Rev. Mater. Res. 38, 71–99 (2008)

    Article  ADS  Google Scholar 

  2. Barthlott, W. & Neinhuis, C. Purity of the sacred lotus, or escape from contamination in biological surfaces. Planta 202, 1–8 (1997)

    Article  CAS  Google Scholar 

  3. Gao, X. F. & Jiang, L. Water-repellent legs of water striders. Nature 432, 36 (2004)

    Article  ADS  CAS  Google Scholar 

  4. Hansen, W. R. & Autumn, K. Evidence for self-cleaning in gecko setae. Proc. Natl Acad. Sci. USA 102, 385–389 (2005)

    Article  ADS  CAS  Google Scholar 

  5. Gao, X. F. et al. The dry-style antifogging properties of mosquito compound eyes and artificial analogues prepared by soft lithography. Adv. Mater. 19, 2213–2217 (2007)

    Article  CAS  Google Scholar 

  6. Epstein, A. K., Pokroy, B., Seminara, A. & Aizenberg, J. Bacterial biofilm shows persistent resistance to liquid wetting and gas penetration. Proc. Natl Acad. Sci. USA 108, 995–1000 (2011)

    Article  ADS  CAS  Google Scholar 

  7. Quéré, D. Non-sticking drops. Rep. Prog. Phys. 68, 2495–2532 (2005)

    Article  ADS  Google Scholar 

  8. Tuteja, A. et al. Designing superoleophobic surfaces. Science 318, 1618–1622 (2007)

    Article  ADS  CAS  Google Scholar 

  9. Tuteja, A., Choi, W., Mabry, J. M., McKinley, G. H. & Cohen, R. E. Robust omniphobic surfaces. Proc. Natl Acad. Sci. USA 105, 18200–18205 (2008)

    Article  ADS  CAS  Google Scholar 

  10. Nguyen, T. P. N., Brunet, P., Coffinier, Y. & Boukherroub, R. Quantitative testing of robustness on superomniphobic surfaces by drop impact. Langmuir 26, 18369–18373 (2010)

    Article  CAS  Google Scholar 

  11. Bocquet, L. & Lauga, E. A smooth future? Nature Mater. 10, 334–337 (2011)

    Article  ADS  CAS  Google Scholar 

  12. Poetes, R., Holtzmann, K., Franze, K. & Steiner, U. Metastable underwater superhydrophobicity. Phys. Rev. Lett. 105, 166104 (2010)

    Article  ADS  Google Scholar 

  13. Bohn, H. F. & Federle, W. Insect aquaplaning: Nepenthes pitcher plants capture prey with the peristome, a fully wettable water-lubricated anisotropic surface. Proc. Natl Acad. Sci. USA 101, 14138–14143 (2004)

    Article  ADS  CAS  Google Scholar 

  14. Ahuja, A. et al. Nanonails: a simple geometrical approach to electrically tunable superlyophobic surfaces. Langmuir 24, 9–14 (2008)

    Article  CAS  Google Scholar 

  15. Li, Y., Li, L. & Sun, J. G. Bioinspired self-healing superhydrophobic coatings. Angew. Chem. Int. Ed. Engl. 49, 6129–6133 (2010)

    Article  CAS  Google Scholar 

  16. Lee, C. & Kim, C. J. Underwater restoration and retention of gases on superhydrophobic surfaces for drag reduction. Phys. Rev. Lett. 106, 014502 (2011)

    Article  ADS  Google Scholar 

  17. Cassie, A. B. D. & Baxter, S. Wettability of porous surfaces. Trans. Faraday Soc. 40, 0546–0550 (1944)

    Article  CAS  Google Scholar 

  18. Cassie, A. B. D. & Baxter, S. Large contact angles of plant and animal surfaces. Nature 155, 21–22 (1945)

    Article  ADS  CAS  Google Scholar 

  19. Shafrin, E. G. & Zisman, W. A. Constitutive relations in the wetting of low energy surfaces and the theory of the retraction method of preparing monolayers. J. Phys. Chem. 64, 519–524 (1960)

    Article  CAS  Google Scholar 

  20. Bauer, U. & Federle, W. The insect-trapping rim of Nepenthes pitchers: surface structure and function. Plant Signal. Behav. 4, 1019–1023 (2009)

    Article  Google Scholar 

  21. Federle, W., Riehle, M., Curtis, A. S. G. & Full, R. J. An integrative study of insect adhesion: mechanics and wet adhesion of pretarsal pads in ants. Integr. Comp. Biol. 42, 1100–1106 (2002)

    Article  Google Scholar 

  22. Wenzel, R. N. Resistance of solid surfaces to wetting by water. Ind. Eng. Chem. 28, 988–994 (1936)

    Article  CAS  Google Scholar 

  23. Courbin, L. et al. Imbibition by polygonal spreading on microdecorated surfaces. Nature Mater. 6, 661–664 (2007)

    Article  ADS  CAS  Google Scholar 

  24. de Gennes, P.-G., Brochard-Wyart, F. & Quéré, D. Capillarity and Wetting Phenomena: Drops, Bubbles, Pearls, Waves 15–18 (Springer, 2003)

    MATH  Google Scholar 

  25. Pokroy, B., Epstein, A. K., Persson-Gulda, M. C. M. & Aizenberg, J. Fabrication of bioinspired actuated nanostructures with arbitrary geometry and stiffness. Adv. Mater. 21, 463–469 (2009)

    Article  CAS  Google Scholar 

  26. Chen, W. et al. Ultrahydrophobic and ultralyophobic surfaces: some comments and examples. Langmuir 15, 3395–3399 (1999)

    Article  CAS  Google Scholar 

  27. Delmas, M., Monthioux, M. & Ondarcuhu, T. Contact angle hysteresis at the nanometer scale. Phys. Rev. Lett. 106, 136102 (2011)

    Article  ADS  Google Scholar 

  28. Furmidge, C. G. Studies at phase interfaces. 1. Sliding of liquid drops on solid surfaces and a theory for spray retention. J. Colloid Sci. 17, 309–324 (1962)

    Article  CAS  Google Scholar 

  29. Ishino, C., Reyssat, M., Reyssat, E., Okumura, K. & Quéré, D. Wicking within forests of micropillars. Europhys. Lett. 79, 56005 (2007)

    Article  ADS  Google Scholar 

  30. Nakajima, A., Fujishima, A., Hashimoto, K. & Watanabe, T. Preparation of transparent superhydrophobic boehmite and silica films by sublimation of aluminum acetylacetonate. Adv. Mater. 11, 1365–1368 (1999)

    Article  CAS  Google Scholar 

Download references

Acknowledgements

T.-S.W. acknowledges funding support from the Croucher Foundation Postdoctoral Fellowship. We thank K. E. Martin for help with the drop impact test. We also thank J. C. Weaver and P. Allen for help in manuscript preparation. The work was supported partially by the AFOSR MURI award FA9550-09-1-0669-DOD35CAP (optical properties), and ARO MURI award W911NF-09-1-0476 (robustness and self-repair). We acknowledge the use of the facilities at the Harvard Center for Nanoscale Systems supported by the NSF under award ECS-0335765.

Author information

Authors and Affiliations

  1. School of Engineering and Applied Sciences, Wyss Institute for Biologically Inspired Engineering and Kavli Institute for Bionano Science and Technology, Harvard University, Cambridge, 02138, Massachusetts, USA

    Tak-Sing Wong, Sung Hoon Kang, Sindy K. Y. Tang, Benjamin D. Hatton, Alison Grinthal & Joanna Aizenberg

  2. Schlumberger-Doll Research Center, Schlumberger, Cambridge, 02139, Massachusetts, USA

    Elizabeth J. Smythe

Authors
  1. Tak-Sing Wong
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Sung Hoon Kang
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Sindy K. Y. Tang
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Elizabeth J. Smythe
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Benjamin D. Hatton
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Alison Grinthal
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Joanna Aizenberg
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

T.-S.W. and J.A. conceived the research. J.A. supervised the research. T.-S.W., S.H.K. and S.K.Y.T. designed the experiments. T.-S.W. carried out surface wettability characterizations. S.H.K. prepared samples and conducted data analysis. T.-S.W., S.H.K. and S.K.Y.T. carried out surface morphology characterizations. T.-S.W. and S.H.K. carried out drop impact tests and ice experiments. E.J.S. and T.-S.W. carried out the high pressure and optical transmission measurements. B.D.H. and T.-S.W. carried out blood compatibility tests. T.-S.W., S.H.K., A.G. and J.A. wrote the manuscript.

Corresponding author

Correspondence to Joanna Aizenberg.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Supplementary information

Supplementary Information

The file contains Supplementary Methods, Supplementary Discussion, Supplementary Tables 1-6 and Supplementary Figures 1-8 with legends. (PDF 1076 kb)

Supplementary Movie 1

This movie demonstrates the liquid repellency of a SLIPS under extremely high pressure (˜675 atm) environment. As seen from the movie, a droplet of decane (˜ 4 µL) retains the ability to slide on the SLIPS when the surface is tilted less than 10 degrees relative to the horizontal plane. (MOV 3478 kb)

Supplementary Movie 2

This movie demonstrates the fast recovery of the liquid-repellent function of a SLIPS after critical physical damage. As seen from the movie, the crude oil droplet is pinned on a nanostructured superhydrophobic surface (without lubricating fluid), while the droplet maintains its mobility on the SLIPS. Extra-light crude oil (from Appalachian Basin, USA) was used as the test liquid for demonstration. (MOV 7249 kb)

Supplementary Movie 3

This movie demonstrates the excellent oil repellency of a SLIPS, as compared to other textured and non-textured surfaces. As seen from the movie, oils slide faster on the SLIPS leaving behind no noticeable oil, whereas oil stains are observed on the other surfaces. Light crude oil (from Louisiana, USA) was used as the test liquid for demonstration. This movie corresponds to Fig. 4a in the main text. (MOV 5108 kb)

Supplementary Movie 4

This movie demonstrates the excellent blood repellency of a SLIPS, as compared to other textured and non-textured surfaces. As seen from the movie, no noticeable blood is left on the SLIPS, whereas blood stains are observed on the other surfaces. Sheep blood (HemoStat Laboratories, CA) was used as the test fluid. This movie corresponds to Fig. 4b in the main text. (MOV 4705 kb)

Supplementary Movie 5

This movie demonstrates the excellent ice-repellency of a SLIPS, as compared to a nanostructured surface. As seen from the movie, an ice block (formed from a frozen water droplet of ˜100 µL at –4 °C and ˜45% relative humidity) slides on the SLIPS under the influence of gravity. In comparison, an ice block of the same volume remains strongly pinned on a superhydrophobic nanostructured surface without a lubricating layer. This movie corresponds to Fig. 4c in the main text. (MOV 4671 kb)

Supplementary Movie 6

This movie demonstrates the ability of a SLIPS to repel an insect and a highly viscous fluid (i.e., strawberry jam). As seen from the movie, a carpenter ant is unable to stay on our synthetic slippery surface—a direct mimicry on the insect-trapping capability of pitcher plants in nature. This movie corresponds to Fig. 4d in the main text. (MOV 7307 kb)

Supplementary Movie 7

This movie demonstrates the self-cleaning ability of a SLIPS. As seen from the movie, carbon dust is seeded onto the SLIPS and can be easily removed by sliding an ethanol droplet across the surface. This movie corresponds to Fig. S7a in the Supplementary Information. (MOV 5003 kb)

PowerPoint slides

Rights and permissions

Reprints and permissions

About this article

Cite this article

Wong, TS., Kang, S., Tang, S. et al. Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity. Nature 477, 443–447 (2011). https://doi.org/10.1038/nature10447

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/nature10447

This article is cited by

Search

Advanced search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing