Abstract
Bone biomaterials play a vital role in bone repair by providing the necessary substrate for cell adhesion, proliferation, and differentiation and by modulating cell activity and function. In past decades, extensive efforts have been devoted to developing bone biomaterials with a focus on the following issues: (1) developing ideal biomaterials with a combination of suitable biological and mechanical properties; (2) constructing a cell microenvironment with pores ranging in size from nanoscale to submicro- and microscale; and (3) inducing the oriented differentiation of stem cells for artificial-to-biological transformation. Here we present a comprehensive review of the state of the art of bone biomaterials and their interactions with stem cells. Typical bone biomaterials that have been developed, including bioactive ceramics, biodegradable polymers, and biodegradable metals, are reviewed, with an emphasis on their characteristics and applications. The necessary porous structure of bone biomaterials for the cell microenvironment is discussed, along with the corresponding fabrication methods. Additionally, the promising seed stem cells for bone repair are summarized, and their interaction mechanisms with bone biomaterials are discussed in detail. Special attention has been paid to the signaling pathways involved in the focal adhesion and osteogenic differentiation of stem cells on bone biomaterials. Finally, achievements regarding bone biomaterials are summarized, and future research directions are proposed.
Similar content being viewed by others
Introduction
As an important tissue/organ in the human body, the bone plays a vital role in not only protecting the organs inside the body but also providing mechanical support, hematopoiesis, and mineral storage.1–3 Moreover, it can coordinate with muscular tissue to accomplish various movements and respond to environmental changes.4 Although bone has a certain capability for regeneration and self-repair,5 large segmental bone defects caused by severe trauma, tumor resection, cancer, or congenital diseases can only be repaired by bone grafting.6 In recent years, there has been an increasing demand for bone biomaterials, which are also called bone graft substitutes.7 In the United States, over 2 million surgeries are conducted each year to repair damaged or fractured bones by grafting. As a result, the bone biomaterial market in the United States exceeded 39 billion dollars in 2013.8 In China, the number of patients with limited limb function due to bone defects has reached up to 10 million.9 However, many patients cannot be treated effectively due to the lack of bone biomaterial availability. Consequently, they must settle for less desirable options, such as amputation due to bone tissue necrosis, which places a great burden on both the patients and society.10 Therefore, bone defects have become a serious social problem, and more effort should be devoted toward developing bone biomaterials for bone repair.11
The structure of natural bone is shown in Figure 1. In terms of composition, natural bone is a composite material composed of organic and inorganic materials.12 The organic materials are mainly collagen fibers containing tropocollagen, which endow the bone with a certain toughness.13 The inorganic materials are mainly calcium (Ca) and phosphorus (P) in the form of hydroxyapatite (HA) crystals, as well as sodium (Na), potassium (K), magnesium (Mg), fluoride (F), chlorine (Cl), carbonate (CO32−), and some trace elements, such as silicon (Si), strontium (Sr), iron (Fe), zinc (Zn), and copper (Cu), which endow the bone with a certain strength.14 In terms of structure, natural bone has a multi-scale structure that can be divided into cortical bone and cancellous bone.15 Cortical bone is located at the surface of the bone and contains 99% of the Ca and 90% of the phosphate in the human body. It is relatively dense and strong, with a low porosity of 5%–10%.16 Cancellous bone is spongy, and this tissue is distributed inside the bone. It is formed by intertwining lamellar trabeculae, which contain hematopoietic cells, adipose tissue, and blood vessels. Cancellous bone accounts for only 20 wt% of the bone in the human body, but its porosity reaches 50%–90%, with a specific surface area almost 20 times that of cortical bone.17 These special compositions and structures endow bone with superior properties to accomplish various functions. However, the composition and structure of bone vary with the defect site, age, genetic inheritance, and living conditions of patients, resulting in different demands for bone implants.18 Therefore, it has long been a challenge to develop ideal bone biomaterials that meet the requirements for bone repair.
As a bridge between native tissues and seeded cells, bone biomaterials play a vital role in bone repair.19 The specific biomaterial and porous structure can guide and control the type, structure, and function of regenerated tissue.20 To obtain a composition, structure, and function similar to that of natural bone, the following issues regarding bone biomaterials should be addressed: (1) developing ideal biomaterials with appropriate biological properties and mechanical performance. Bone biomaterials should primarily meet safety requirements, such as being non-toxic and not eliciting inflammatory or immune responses. Moreover, they should possess good biocompatibility and bioactivity, as well as controllable biodegradability.21 Furthermore, bone biomaterials should not simply fill the bone defects but should also degrade continuously in vivo. To avoid compromising the function and structure of new bone, the degradation rate of bone biomaterials should match the growth rate of new bone.22,23 Additionally, bone biomaterials should possess mechanical properties and stability appropriate for the defect site because biomaterials need to provide structural support for both the defect site and the newly formed tissue.24,25 (2) Constructing a cell microenvironment with pore sizes on the nano-, submicro-, and microscale. A multi-scale porous structure can provide the necessary space and environment for the growth of different cells and tissues and facilitate extracellular matrix (ECM) formation, nutrient transport, and nerve and blood vessel ingrowth.26 Since the site and structure of bone defects differ among patients, bone biomaterials should have a customizable external shape and internal structure to match the defect site and provide long-term stability.27 (3) Inducing the oriented differentiation of stem cells for artificial-to-biological transformation. Positive interactions between bone biomaterials and cells are necessary to facilitate cell functions, such as adhesion, proliferation, differentiation, and gene expression.28 More importantly, bone biomaterials should have good osteoinductivity, that is, the ability to induce the differentiation of stem cells into osteogenic cells, leading to the formation of bone tissue.29 Good osteoinductivity can provide a compatible interface between a bone biomaterial and native tissue and guide the growth of bone tissue along the interface, eventually resulting in the formation of new bone tissue closely integrated with the bone biomaterial.30 Therefore, the above three issues have been intensely investigated over recent years.
Main types of bone biomaterials
After implantation, bone biomaterials act as a medium for the contact and interaction of bone implants with the surrounding cells/tissues. Thus, the selection of bone biomaterials is a key step in the preparation of ideal bone implants.31 Generally, the selection of bone biomaterials is based on their inherent biocompatibility, biodegradability, and mechanical properties, as well as the resulting cell behavior. In addition, the physicochemical characteristics, molecular weight, and hydrophilicity/hydrophobicity of bone biomaterials are also very important.32 As mentioned above, natural bone is composed of cortical and cancellous bone, which exhibit quite different mechanical properties because of their different compositions and structures. It has been reported that the compressive strength, fracture toughness, and elastic modulus of cortical bone are within 100–180 MPa, 2–12 MPa·m1/2, and 7–30 GPa, respectively, while those of cancellous bone are within 2–12 MPa, 0.1–0.8 MPa·m1/2, and 0.2–0.5 GPa, respectively.33–35 To provide sufficient mechanical support for the defect site and newly formed tissues during bone repair, bone implants should possess mechanical properties that match the natural bone; otherwise, bone repair failure may occur in the human body.36,37 Therefore, the mechanical properties of bone biomaterials are considered one of the most important selection criteria. Commonly studied bone biomaterials can be categorized as bioceramics, polymers, and biomedical metals.38 It has been widely accepted that bioceramics are brittle materials with a low fracture toughness, insufficient mechanical strength, and a high elastic modulus compared with those of cortical bone, while the mechanical strength and elastic modulus of polymers are far below the requirements of cortical bone,39,40 which significantly limits their application in weight-bearing sites. In the past decade, intensive efforts have been devoted to improving the mechanical properties of bioceramics or polymers by creating composites with other bone biomaterials, but limited improvements have been achieved due to the difficulties in obtaining a uniform dispersion and strong interfacial bonding.41–44 As a result, currently, bioceramics and/or polymers can only be used as bone stuffing or for the reconstruction of bone defects in cancellous bone, instead of direct weight-bearing applications.45 In contrast, biomedical metals generally have a higher mechanical strength than bioceramics and polymers, but their mechanical properties, especially the elastic modulus, are also incompatible with that of natural bone, causing stress shielding and further bone loss, bone relaxation, and osteoporosis.46,47 Therefore, the mechanical properties of current bone biomaterials can not meet the requirements for bone repair, especially in weight-bearing applications.
Two other important criteria for bone biomaterials are biodegradability and bioactivity. Some bioceramics (including aluminum oxide and zirconium oxide), polymers (including polyurethane and silicone rubber), and biomedical metals (including stainless steel and titanium (Ti) alloys) are non-biodegradable and bioinert materials. Despite good biocompatibility and/or excellent mechanical strength, they cannot biodegrade and thus are retained as permanent implants in vivo .48 Moreover, these biomaterials lack bioactivity and can only bond with bone tissue through mechanical interlocking, which easily results in loosening and wear after long-term implantation.49–51 Therefore, recent studies have gradually shifted their focus onto biodegradable and/or bioactive materials, including bioactive ceramics, biodegradable polymers, and biodegradable metals.52–55
Bioactive ceramics
Types and characteristics
Bioactivity, first proposed by Professor Hench in 1969, is a characteristic of chemical bonding between bone biomaterials and biological tissues.56 To date, bioactive materials mainly refer to bioactive ceramics, such as Ca–P ceramics, Ca–Si ceramics, bioactive glasses, and calcium sulfates.52,57
As the most representative bioactive ceramics, Ca–P ceramics, including HA [Ca10(PO4)6(OH)2] and tricalcium phosphate [TCP, Ca3(PO4)2], have compositions similar to that of natural bone.58 They not only have good biocompatibility and osteoconductivity but can also osseointegrate with the defect site.59 Moreover, the degradation products and released ions can participate in the human metabolism and create an alkaline environment to enhance cell activity and accelerate bone repair.60 HA is the main mineral of natural bone and thus has been extensively studied as a bone biomaterial.61–63 It has a theoretical density of 3.16 g·cm−3 and a Ca/P molar ratio of 1.67.63 After implantation, it is capable of guiding new bone growth and forming chemical bonding with bone tissue with a bonding strength 5–7 times higher than that between bioinert ceramics and natural bone.64 Meanwhile, HA has good osteoinductivity, and its hydroxyl groups have an ideal affinity for the amino acids, proteins, and organic acids in the human body via hydrogen bonding.65 However, HA has a relatively high crystallinity and stability, which makes it difficult to degrade in vivo .66 Compared with HA, TCP is more degradable and becomes soluble more rapidly; its degradation rate is 10–20 times higher than that of HA.66 The degradation products can provide abundant Ca and P for osteoblasts and induce bone regeneration.67 Furthermore, TCP can form a direct connection with the bone tissue after implantation, without the intervention of fibrous connective tissue.68 Bruder et al69 implanted porous TCP seeded with bone marrow osteoblasts into dogs. After 3 months, the implants had integrated with the host bone, and the bone defects were repaired.
In recent years, Ca–Si ceramics, including wollastonite (CaSiO3), akermanite (Ca2MgSiO7), diopside (CaMgSi2O6), hardystonite (Ca2ZnSi2O7), bredigite (Ca7MgSi4O16), and merwinite (Ca3MgSi2O8), have been developed.70 Ca exists in the active area of natural bone and plays an important role in the growth of bones and blood vessels.71 Si is one of the most important trace elements in the human body, and its content reaches 100 ppm in bones and 200–550 ppm in the ECM.72 Si is commonly absorbed in the form of metasilicate, which is widely distributed in connective tissue.73 Si plays an important role in bone calcification and is beneficial for improving bone density and preventing osteoporosis.72 Especially in the early stage of osteogenesis, a high Si content in new bone can increase the degree of calcification to some extent, while a Si deficiency always causes bone distortion.74 Some studies have shown that Si can not only promote the synthesis of collagen and proteoglycan but also activate bone-related gene expression and stimulate osteoblast proliferation and differentiation.75 It has been reported that the ion products released by Ca–Si ceramics can enhance the effectiveness of insulin-like growth factor (IGF) II, which is specifically related to cell proliferation.76 This enhancement is achieved by inducing the transcription of growth factors and carrier proteins and regulating the separation of binding proteins. Wu et al77 prepared porous akermanite by a polymer foaming method and analyzed the effect of ion release on cell activity. The results showed that Ca and Si ions could be released from akermanite during the immersion process, which promoted the early mineralization, division, and gene expression of osteoblasts. Moreover, Si ions showed better stimulatory effects on cells than Ca ions. Compared with Ca–P ceramics, Ca–Si ceramics have shown better performance in terms of mechanical properties.78–81 For example, most Ca–Si ceramics, such as diopside and akermanite, have shown a higher bending strength and fracture toughness than HA.82 Moreover, the relatively wider range of Ca–Si ceramics than Ca–P ceramics in chemical compositions also has a significant impact on regulating the mechanical properties of bioactive ceramics.83 Mechanical stability is also an important characteristic of bone implants because they should maintain sufficient mechanical strength to provide support for new tissues before completely degrading.84 It was reported that diopside had a better compressive strength and mechanical stability than bioactive glasses and wollastonite.85 More specifically, the initial compressive strengths (0.63–1.36 MPa) of diopside scaffolds with porosities of 75%–80% were comparable to that of cancellous bone and lower than that of cortical bone. After 14 days of degradation in simulated body fluid (SBF), the compressive strengths of diopside scaffolds were reduced by 30%, which was much less than the reduction observed for bioactive glass scaffolds (54%) and wollastonite scaffolds (60%) under the same conditions. These features demonstrate the great potential of Ca–Si ceramics for application in bone repair.
Bioactive glasses mainly consist of silicon dioxide (SiO2), phosphorus pentoxide (P2O5), and calcium oxide (CaO), and some of them also contain sodium oxide (Na2O), potassium oxide (K2O), and/or magnesium oxide (MgO).86 Based on the differences in composition and proportion, bioactive glasses can be categorized as 45S5 (molar ratio: 46.1% SiO2, 24.4% Na2O, 26.9% CaO, and 2.6% P2O5), 58S (molar ratio: 60% SiO2, 36% CaO, and 4% P2O5), and 1393 (molar ratio: 54.6% SiO2, 22.1% CaO, 6.0% Na2O, 1.7% P2O5, 7.9% K2O, and 7.7% MgO), among others.87 Bioactive glasses have good biocompatibility and an excellent capability for heterogeneous nucleation and apatite deposition. They can form strong chemical bonding with surrounding bone tissue within a short time.88 In the physiological environment, bioactive glasses release Si, Ca, P, and Na ions through ion exchange, leading to the formation of electronegative Si-OH and a Si-rich gel layer on the surface through polycondensation.89 On the one hand, the electronegative Si-OH bonds with different types of proteins via hydrogen and ammonia bonding, resulting in high-density protein adsorption. On the other hand, Ca2+, PO43−, CO32−, and OH− in body fluids can be absorbed to form a hydroxycarbonate-apatite (HCA) layer on the surface of the Si-rich gel layer.89 The Si-rich gel layer and HCA layer each possess a high surface areas and are thus capable of adsorbing large quantities of biomolecules, thereby promoting extracellular responses.89 More importantly, as bioactive glasses are by far the only bioceramics that can form bonding with both hard and soft tissues,90 they have received great attention as bone biomaterials. Sepulveda et al91 found that differences in the type and powder properties of bioactive glasses can generate different degradation rates and bioactivities, and thus modulate the release of active ions. Compared with 45S5, 58S had a faster degradation rate and can be completely covered by a high-crystallinity apatite layer after only 1 h of immersion. The degradation rates of both bioactive glasses increased with decreasing powder particle size.
Disadvantages and strategies
Bioactive ceramics have good biocompatibility and bioactivity and have thus become an important focus in bone biomaterial research. However, there are still some shortcomings in the use of bioactive ceramics as bone biomaterials, such as low toughness and insufficient strength. In particular, the strength of bioactive ceramics is further weakened when used to form porous implants.92 Therefore, currently, bioactive ceramics can only be used in non- or low-loading applications. To address these problems, researchers have proposed the use of nanoscale second phases,93 surface coatings,94 and self-toughening methods95 to improve the mechanical properties of bioactive ceramics.
The commonly used nanoscale second phases include nanoparticles, nanotubes, and nanosheets. In terms of the dimension of reinforcement, nanoparticles are zero-dimensional reinforcements and are the most popular method for reinforcing ceramics.96 Nanoparticles possess a large specific surface area and chemical activity97 and can thus reinforce materials effectively. The typical reinforcement mechanisms of nanoparticles can be summarized as follows: (1) the pinning effect:98 when encountering nanoparticles, the crack tip cannot pass through and is deflected because of the pinning effect, which dissipates the fracture energy and thus enhances the mechanical properties of bioactive ceramics. (2) Dispersion reinforcing:99 the dispersed nanophase can generate local stress to enhance bioactive ceramics through the mismatch of physicochemical properties, such as Young’s modulus and thermal expansion coefficient. (3) Grain refinement:100 nanoparticles can inhibit the abnormal growth of ceramic grains, resulting in a uniform and refined grain structure. (4) Fracture mode transformation:101 the nanoparticles act as a nucleus and are wrapped by ceramic particles to form an intragranular structure, which weakens the main grain boundary and contributes to transgranular fracture when the bone biomaterial fractures. In comparison, nanotubes and nanosheets are one- and two-dimensional reinforcements, respectively.102 In recent years, they have attracted increasing attention in ceramic-based composites owing to their large length/diameter and width/thickness ratios, respectively.103 Commonly used nanotubes and nanosheets include carbon nanotubes (CNTs) and graphene.104–107 Their reinforcement mechanisms mainly include the following: (1) crack deflection:108 when encountering nanotubes or nanosheets, the crack cannot pass through and can only deflect to continue propagating, which prolongs the path and increases energy consumption for crack propagation. (2) Crack-bridging:109 nanotubes or nanosheets bridge both sides of the crack to prevent further propagation and opening. (3) The pull-out effect:110 nanotubes or nanosheets are pulled out from the ceramic matrix during crack propagation, which consumes external energy by interfacial friction. Lahiri et al111 added boron nitride nanotubes (BNNTs) to HA ceramics and found that the mechanical properties were improved by the sword-in-sheath phenomenon and crack-bridging mechanism of the BNNTs (Figure 2). In addition, many studies have confirmed that the large specific surface area and unique structure of nanoscale second phases can not only improve mechanical properties but also promote cell adhesion and proliferation on bioactive ceramics.112,113
Another reinforcement method is surface treatments to form coatings on the surface of bioactive ceramics. Surface coatings can passivate stress concentration and inhibit crack propagation in ceramics, leading to transformation of the fracture mode from integral fracture to layered fracture and thus enhancing the mechanical properties.114 Commonly used coating materials include polymers115 and glasses.116 Milovac et al115 coated polycaprolactone (PCL) on porous HA by vacuum impregnation and found that the compressive strength and elastic modulus of the coated HA were close to that of trabecular bone. Roohani-Esfahani et al116 coated 58S on the surface of HA/TCP biphasic ceramics and found that the compressive strength and elastic modulus were increased by 14 and 3 times, respectively. Self-toughening is another reinforcement technology via microstructure design.117 Specifically, raw materials that can generate a second phase are introduced to form whiskers or grain reinforcements with a high length/diameter ratio by in situ growth on ceramic grains. Zhou et al118 prepared HA whiskers on HA substrates by the in situ growth method. The results showed that the compressive strength of HA was greatly improved and that the fracture mode changed from the original integral, brittle fracture mode to a two-step fracture mode.
Biodegradable polymers
Types and characteristics
Biodegradable polymers degrade mainly through microbial and enzymatic actions and the mechanical damage caused by cell growth.119 They can be categorized as natural biodegradable polymers and synthetic biodegradable polymers.120,121
Natural biodegradable polymers are directly derived from animal or plant tissues and mainly include collagen, chitosan, and cellulose.122,123 The main advantages of these biomaterials lie in their low risk of eliciting an immune response, non-toxicity, few side effects, and wide availability, as well as their good bioactivity, cell affinity, and hydrophilicity.124 Their degradation products are mostly amino acids, which can be absorbed directly by the human body.125 As one of the most important extracellular components, collagen constitutes the framework of the ECM, provides necessary elasticity for cells, and plays an important role in cell migration and growth.126 O'Loughlin et al127 seeded cells on collagen implants prepared by a freeze-drying method, and the in vivo results showed that collagen implants facilitated cell migration and blood vessel formation. Su et al128 loaded bone morphogenetic protein 2 (BMP-2) and dexamethasone (Dex) in collagen composite fibers and found that both growth factors could be stably released along with the degradation of the material, which promoted the differentiation of bone marrow mesenchymal stem cells (BMSCs) into osteoblasts. Chitosan, generally derived from chitin, is the only type of alkaline aminopolysaccharide.129 The structure and properties of chitosan are very similar to those of the aminopolysaccharides in the ECM. Its surface is rich in positive charges, which is favorable for the adhesion of negatively charged cells.130 Moreover, the surface of chitosan contains many pendant groups, which can be modified (such as via sulfonation, esterification, and etherification) for specific needs.131 Seol et al132 prepared porous chitosan by a freeze-drying method and performed cell culture experiments using rat calvarial osteoblasts. The results showed that chitosan was beneficial for the proliferation and differentiation of osteoblasts. Moreover, calcium deposition and new bone formation were observed after cells were cultured on chitosan. Similar findings were also reported by Klokkevold et al,133 who demonstrated that chitosan could promote the differentiation of osteoblasts.
Synthetic biodegradable polymers include poly(lactic acid) (PLA),134 poly(glycolic acid) (PGA),135 poly(lactic-co-glycolic acid) (PLGA),136 poly(vinyl alcohol) (PVA),137 PCL,138 and polyoxyethylene (POE). They greatly differ from each other in terms of structure and properties.139 Thus, the surface properties and degradation behavior can be modulated via the molecular design and synthesis process, resulting in synthetic biodegradable polymers being very versatile as bone biomaterials.140 Compared with natural biodegradable polymers, numerous varieties of synthetic biodegradable polymers are available, and they can provide improved mechanical properties and plasticity.141 In the physiological environment, the surface of polymers undergoes a hydrolysis reaction; as a result, the polymer chains are cut into compounds with smaller molecular weights. These compounds are either absorbed or excreted by the body.142 PLA is one of the most typical synthetic biodegradable polymers, and it is derived from renewable plant resources.143 It has good biocompatibility and biodegradability, and the degradation products are not toxic to the human body.144 PLA also possesses a tensile strength up to 40–60 MPa and an elastic modulus of 3 000–4 000 MPa. Therefore, it has been used to replace stainless steel as a new type of orthopedic fixation material in Europe and the United States.145 PLA has three stereoisomers: poly(l-lactic acid) (PLLA), poly(d-lactic acid) (PDLA), and poly(d,l-lactic acid) (PDLLA).146 They have good plasticity and processability and can be prepared into 3D implants by methods such as electrospinning,147 gas foaming,148 and solution casting.149 Therefore, PLA has been widely used in bone repair, vascular substitutions, and other biomedical applications. Suryanegara et al150 evaluated the stability, biocompatibility, and degradability of PLA and found that PLA had good thermal stability and cytocompatibility. PGA is a semi-crystalline synthetic polymer with good biocompatibility and biodegradability.151 When it degrades, the non-crystalline part first degrades into glycolic acid (GA), which can be easily metabolized by the body; then, the crystalline part degrades into harmless water and carbon dioxide.152 PLGA is randomly polymerized by two kinds of monomers, lactic acid (LA) and GA. It possesses good biocompatibility and modular biodegradability because the degradation rate increases with the GA/LA ratio in PLGA.153,154 This modular degradation behavior has enabled it to be widely used in the biomedical field. Currently, PLA, PGA, and PLGA are approved by the US Food and Drug Administration for clinical applications, including surgical sutures, injection capsules, and bone biomaterials.155 PVA can degrade in vivo , and the degradation products are not toxic to the human body.156 PVA also has good hydrophilicity and excellent chemical stability, and its semi-crystalline characteristics can provide the necessary channels for oxygen and nutrient transport, as well as metabolic waste excretion.157 PCL is a semi-crystalline polymer formed by the ring-opening polymerization of caprolactone. It has excellent thermal processability and a slow degradation rate.158 Compared with most biodegradable polymers, PCL has better mechanical properties and higher break elongation.159 Williams et al160 prepared a porous PCL to mimic the jawbone, and the in vitro osteogenic results showed that after 1 month, normal bone structures, including osteoblasts, bone protrusion, and bone marrow space, were observed in both the inner and outer part of the porous PCL. POE is synthesized by the polycondensation of polybasic acid or polybasic ester with polyol under anhydrous conditions.161 It is a hydrophobic polymer and degrades by ester bond hydrolysis due to the infiltration of water molecules into POE, followed by surface and bulk degradation.161 The resulting water-soluble small molecules can be metabolized by the host organism.
Disadvantages and strategies
Although biodegradable polymers have been widely used, several problems remain: (1) there is a contradiction between the mechanical properties and degradation rate, that is, a high molecular weight usually accompanies a high strength, while the degradation rate can hardly meet the requirements for bone repair.138 (2) Natural polymers have poor thermal stability and processability and poor degradation rate control. (3) Synthetic polymers exhibit poor cell adhesion, which is mainly attributed to the fact that polymers have few polar groups and thus an extremely low surface free energy.162 (4) Synthetic polymers lack bioactivity and cannot form chemical bonding with human tissue.163 (5) The degradation products of synthetic polymers are generally mildly acidic, and local acidity that is too high will hinder the cell growth on bone biomaterials or even cause inflammation;164 for example, clinical studies indicate that the ratio of nonspecific inflammation caused by PLA and PGA is up to 8%.165 (6) There is still a gap in terms of the mechanical properties of biodegradable polymers and cortical bone, especially in hardness and strength.166 To address these problems, researchers have conducted intensive studies with a focus on creating biomaterials with excellent bioactivity and/or mechanical properties.
One research direction similar to that of bioactive ceramics is nanoscale second-phase reinforcing.167,168 Zhang et al40 incorporated surface-modified nanodiamond into PLLA and found that 10 wt% nanodiamond significantly improved the fracture strain and fracture energy of PLLA by 280% and 310%, respectively, compared with pure PLLA. Moreover, the in vitro mineralization results revealed that the apatite-forming ability of the composites was significantly improved. Nanodiamond was also introduced into PVA to improve the hardness and elastic modulus.169 Wang et al170 studied the effect of CNTs on the mechanical properties of PCL and found that the elastic modulus and tensile strength of PCL were enhanced by the pull-out effect of the CNTs. Khan et al171 reinforced PVA with boron nitride nanosheets (BNNSs) and found that a strong interface formed between them, resulting in a 40% increase in the modulus and strength of PVA with 0.12 vol% BNNSs.
Another method to improve the properties of biodegradable polymers is the formation of composites with bioactive ceramics and/or other polymers.172–174 Duan et al175 prepared composite bone biomaterials by a combination of biodegradable poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and bioactive TCP, which provided a cell microenvironment for the adhesion, proliferation, and differentiation of osteoblasts. Nie et al176 incorporated HA into a PLGA matrix to prepare HA/PLGA composites and loaded them with BMP-2. The results showed improved cell adhesion on the HA/PLGA composites and that the composites could continuously release BMP-2. Cui et al177 prepared PDLLA/HA composites through the in situ growth of HA in PDLLA, and a stable interfacial bonding was formed between them, leading to an improved tensile strength and Young's modulus. In addition, the composites also exhibited favorable apatite formation and could maintain an active region at the interface for significantly improved cell differentiation. Bioactive glasses have also been incorporated into PCL, resulting in improved mechanical properties and apatite formation.178,179 Additionally, some studies have demonstrated that different degradation rates could be obtained by adjusting the ratios of the biomaterials in bone implants.180 For example, Bhardwaj et al181 prepared porous polymer composites with silk fibroin protein and chitosan, and degradation tests showed a decreased chitosan degradation rate after the addition of silk fibroin protein (Figure 3), which was attributed to an enhanced steric hindrance effect via physical interactions between them. Regarding the acidic degradation products, an attempt has been made to neutralize the acidic products by adding alkaline materials to polymers, and good results have been achieved.182,183 Saravanan et al184 fabricated chitosan/nano-HA/nano-silver composites based on the following considerations: first, chitosan has good biodegradability and biocompatibility, as well as the potential to be modified by various chemical modifications to obtain desired properties; second, nanoscale HA can improve protein absorption and cell adhesion on bone biomaterials and can provide significant mechanical reinforcement; third, metallic nanoparticles, such as Cu, Zn, and silver (Ag), can prevent infections via their antibacterial activity. The results indicated that ternary composites had better mechanical strengths and degradation rates than binary composites. Moreover, they were non-toxic to osteoblasts and exerted broad-spectrum antibacterial activity against Gram-negative and Gram-positive bacteria.
Biodegradable metals
Types and characteristics
Biodegradable metals, mainly including Mg, Zn, Fe, and their alloys, are considered potential load-bearing bone biomaterials due to their better toughness and processability than bioactive ceramics and better strength and stiffness than biodegradable polymers.185,186 Among these biodegradable metals, Mg and its alloys have attracted the most attention because their Young's moduli (~45 GPa) and densities (~1.74 g·cm−3) are close to those of cortical bone (Young's modulus ~3–25 GPa and density ~1.8–2.0 g·cm−3).186–191 Thus, they can effectively relieve the stress-shielding effect. Moreover, Mg is a major element in the human body and can activate a variety of enzymes involved in metabolic processes.47,192 The daily demand for Mg is 300 mg in adults and 250 mg in children.189 As bone biomaterials, they can not only provide mechanical support at the initial stage of implantation but also degrade along with the growth of new bone tissue. Mg can degrade into Mg ions in vivo and then be absorbed by the surrounding tissues or excreted through the metabolism.193 Thus, Mg and its alloys have been widely considered revolutionary metallic biomaterials.194
Disadvantages and strategies
As a bone biomaterial, the degradation rate of Mg and its alloys should be <0.5 mm per year to provide an effective service period of at least 12 weeks.47 However, Mg has active chemical properties with a low standard corrosion potential of −2.37 V,195 and the surface oxide film formed in corrosive medium exhibits a porous structure (Pilling–Bedworth ratio=0.8).188 These two factors result in the rapid degradation of Mg and its alloys, especially in an environment containing high Cl ion concentration.196 On the one hand, degradation that is too rapid leads to the quick loss of implant mechanical integrity and stability.197 On the other hand, fast degradation leads to the rapid release of large amounts of hydrogen, which aggregates around the implant to form bubbles.198 These bubbles inevitably impair the physiological function of the surrounding tissue and the regeneration of the defect site.198 Moreover, rapid degradation also causes an increase in the alkalinity of body fluids, leading to hemolysis or even osteolysis.199
In general, the degradation of Mg and its alloys in the physiological environment occurs via a corrosion process. The main corrosion mechanisms can be summarized as intergranular corrosion, galvanic corrosion, and pitting corrosion. Intergranular corrosion occurs due to the different chemical compositions of the grain boundaries and interior.200 This significantly weakens the interfacial bonding between Mg grains, thus deteriorating the mechanical strength.201,202 Lin et al203 revealed that intergranular corrosion and pitting corrosion coexisted on the surface of an extruded ZAX1330 Mg alloy [12.83 wt% Zn, 3.35 wt% aluminum (Al), 0.20 wt% Ca] when immersed in SBF for 24 h. After heat treatments, the intergranular corrosion was relieved due to changes in the grain size and second phase distribution. The galvanic effect easily occurs due to the corrosion potential difference between the Mg matrix and second phases or impurities.204 In this case, the Mg matrix acts as the anode and undergoes rapid galvanic corrosion.205 For example, a study by Coy et al206 showed that severe galvanic corrosion attacked an as-cast ZE41 Mg alloy due to the combined effects of cathodic precipitates Zr4Zn and Mg7Zn3REE [-REE refers to rare earth elements, such as lanthanum (La), gadolinium (Gd), and cerium (Ce)]. Li et al207 studied the dynamic corrosion process of as-cast AZ63 alloys, revealing that the corrosion initiates easily due to the formation of galvanic couples between the Mg matrix and the β-Mg17Al12 phase. Meanwhile, impurities, such as Fe, Cu, nickel, and cobalt, in the matrix may locally accelerate the hydrogen evolution reaction. Pitting corrosion is a typical localized corrosion mode.208 Pitting attack begins from an initial breakdown of certain points on the surface film, and then the corrosion pit develops laterally into a deep porous pit due to the continuous collapse of the pit fronts. Pitting corrosion resistance is believed to be closely related to the passivity of the surface film.209 Previous studies have revealed that a higher breakdown potential (Eb) always leads to a high resistance to the passive film breakdown caused by pitting attack.210,211
To date, researchers have devoted extensive efforts to improving the degradation behaviors of Mg and its alloys. The strategies used can be summarized as purification, alloying, surface coating, and rapid solidification (RS) (Figure 4). Purification can improve the degradation behavior by reducing the galvanic corrosion between the Mg matrix and second phases or impurities.216 For example, highly pure Mg (0.004 5 wt% Fe, <0.002 wt% Cu, and <0.002 wt% Ni) has a significantly decreased corrosion rate compared with commercially pure Mg (0.02 wt% Fe, <0.002 wt% Cu, and <0.002 wt% Ni) in Hank’s solution.217 Purification could be realized by permanent mold direct chill casting,218 vacuum distillation,219 zone solidification,220 and sputter deposition.221 It should also be noted that the presence of elemental impurities in Mg is unavoidable. On the one hand, purification becomes less efficient as the purity level of Mg increases.219 On the other hand, highly pure Mg exhibits a relatively low mechanical strength for bone repair due to the low solid solubility of common metallic elements in the Mg matrix. For example, the yield tensile strength of casted commercially pure Mg is less than 50 MPa, which is lower than that of cortical bone.222
Alloying a small amount of an element, including Ca, Zn, Al, manganese (Mn), zirconium (Zr), Sr, and REEs, can alter the chemical composition of Mg and its alloys, as well as the distribution, volume fraction, and size of the second phase, which has significant effects on the degradation behavior.223 The main mechanisms of alloying for enhanced corrosion resistance can be described as follows: (1) the dissolved alloying elements favor an increase in the passivity of the surface film by forming a more sustainable, repairable, and protective film composed of the oxide or hydroxide of the alloying element, thus greatly improving the pitting corrosion resistance.209,224–228 (2) Some alloying elements contribute to reducing the volume fraction and size of the second phase or forming a new second phase with a potential closer to that of Mg, thus diminishing the galvanic corrosion effect.229–231 (3) The alloying elements may give rise to a continuously distributed second phase, which completely covers Mg grains and acts as a passive barrier to hinder the propagation of corrosion.232,233 (4) Some alloying elements could reduce the amount of impurities, such as Fe and Ni, thus mitigating the galvanic corrosion effect;234 for example, Zr can effectively dislodge Fe from the melt alloy by the precipitation of Fe2Zr or FeZr2.216 Mn, Al, and Si can also lower the Fe content in Mg and its alloys.209 (5) Some alloying elements can reduce the exchange current density of the cathodic or anodic reaction in Mg and its alloys.235–237
Surface coating is another method for improving the corrosion resistance by isolating Mg and its alloys from body fluids.238 The commonly used coating materials include polymers,239,240 bioceramics,241–243 and their composites.244,245 Razavi et al prepared a nanostructured akermanite coating246 and diopside coating 247 by electrophoretic deposition. The results showed that the akermanite and diopside coatings not only enhanced the corrosion resistance of Mg alloys but also improved their in vitro bioactivity. Hiromoto et al248 fabricated HA and octacalcium phosphate coatings on an AZ31 alloy, and the results showed that a self-healing layer could be formed on the alloy surface by the deposition of Mg and Ca compounds, which effectively prevented further corrosion. Gao et al249 prepared a rod-like nano-HA and Mg3(PO4)2 composite coating on the surface of Mg alloys to seal the surface pores caused by micro-arc oxidation treatment, which improved the corrosion resistance. Although surface coatings can improve the corrosion resistance of Mg and its alloys to a certain extent, the uniformity and consistency of the coatings on the metal matrix still need to be improved.238 More importantly, the coatings can only protect Mg and its alloys in the early stage of implantation. After the removal of the coatings, the matrix will lose this protection and undergo rapid degradation.
RS technology has emerged as a promising method for improving the degradation behavior of Mg and its alloys.215,250–252 First, RS can effectively extend the solid solubility limits of alloying elements, thereby reducing the elemental impurities or harmful second phases.253 Second, RS generally results in a homogeneous microstructure, which could diminish the localized attack caused by the accumulation of cathodic phases at grain boundaries.188 Third, RS could contribute to refined grains and increased grain boundary density, which is favorable for increasing the surface passivation of Mg and its alloys.254 Aghion et al254 reported that the average corrosion rate (0.4 mm per year) of rapidly solidified AZ80 was slower than that of conventionally casted AZ80 (2.0 mm/year). The enhanced corrosion resistance was attributed to the increased Al content and consequent elimination of the β-phase in the matrix, which reduced the galvanic corrosion activity. A study by Hakimi et al255 revealed that the corrosion resistance of an Mg-6%Nd-2%Y-0.5%Zr alloy was significantly improved by RS due to the increased Nd2O3 in the external oxide layer, as well as a more homogeneous structure and reduced grain size. Despite the great potential of RS in improving the corrosion resistance of Mg and its alloys, relevant research is still in the initial stages of exploration. There are still many problems to be solved, such as element burning and dust evaporation during the RS process.
Porous structure for the ECM microenvironment
Ideal bone biomaterials do not simply mimic the external shape and composition but should also match the internal structure of natural bone.256 In terms of structure, natural bone has a 3D architecture with a multi-scale porous structure ranging from the nanoscale to the submicro- and microscale,257 which offers a microenvironment for cell and tissue growth. The multi-scale porous structure not only provides a large number of binding sites for cell membrane receptors but also determines and maintains cell functionality.258 Cells can exhibit significantly different differentiation characteristics by sensing structural information.259 Specifically, a pore diameter of hundreds of micrometers (150–800 μm) can provide channels for the transport of nutrients and metabolites and is conducive to the ingrowth of new bone tissue and blood vessels.260 A pore diameter of tens of micrometers (10–100 μm) allows for the ingrowth of capillaries, thereby facilitating the exchange of nutrients and the discharge of metabolites.261 A nanoscale pore diameter can provide greater specific surface areas and more active targets, which are beneficial for cell adhesion and protein adsorption, thereby contributing to a favorable cell response.260 Therefore, in order to mimic the ECM microenvironment, bone biomaterials should have a multi-scale porous structure, and the pore diameter, shape, interconnectivity, and porosity not only determine the interactions between bone biomaterials and cells/tissue but also have important effects on the mechanical properties and degradation behavior.262 Generally, bone biomaterials should have an appropriate porosity and good pore interconnectivity because bone biomaterials without interconnected pores cannot provide the necessary channels for blood vessel growth.263,264 With further study on the interactions between bone biomaterials and organisms, people are expanding their requirements for bone biomaterials from biological and mechanical properties, such as biocompatibility, biodegradability, bioactivity, strength, and toughness, to the design and preparation of the internal porous structure and the modification of the material surface, thereby creating the specific physicochemical functions of bone biomaterials.265–267
Pore diameters of hundreds of micrometers
To date, studies on the porous structure of bone biomaterials have mainly focused on a pore diameter of hundreds of micrometers. It has been reported that an open porous structure with a pore diameter of hundreds of micrometers could facilitate bone ingrowth and maintain the stability of the defect site.268,269 There are various methods for preparing pores with diameters of hundreds of micrometers, and the preparation method has a great influence on the porous structure and the final performance of bone biomaterials.270,271
The methods of preparing the porous structure of bioactive ceramics and biodegradable polymers mainly include gas foaming,272,273 space holding,274 freeze-drying,275,276 polymer sponge replication,85 thermally induced phase separation,277–279 solvent casting,280 and electrospinning.281 Tripathi et al282 prepared porous HA by the polymer sponge replication method. It had interconnected oval pores with diameters of 100–300 μm and a wall thickness of ~50 μm. Cell culture tests showed that osteosarcoma cells could adhere to and differentiate well on the porous HA and grow into the pores. Moreover, the cells exhibited better viability and differentiation on porous HA than dense HA due to the improved protein adsorption of the porous structure. Kaufmann et al283 investigated the effects of different porous structures of 45S5 on osteoblast proliferation and differentiation. The results showed that with a given porosity of 44%, pore diameter had no influence on the in vitro expression of osteoblasts, whereas with an average pore diameter of 92 μm, cell viability was influenced by porosity. Ma et al284 reported porous HA prepared by electrophoretic deposition. The pores were interconnected with a pore diameter ranging from several micrometers to several hundred micrometers. Cell culture results demonstrated that the bioactivity of porous HA was related to both the pore interconnectivity and diameter. Shin et al used electrospinning to prepare porous PCL and investigated its cytocompatibility by seeding it with mesenchymal stem cells (MSCs).285 After 1 week of culture, the cells had penetrated the pores, and a large amount of ECM had been generated. After 4 weeks of culture, the surface of the PCL was completely covered by cell layer. Oh et al prepared cylindrical porous PCL with a pore diameter increasing from 88 to 405 μm and a porosity varying from 80 to 94% along the axial direction.286 Subsequently, the effect of pore diameter on cell activity was assessed using chondrocytes, osteoblasts, and fibroblasts. A pore diameter of 380–405 μm allowed for better chondrocyte and osteoblast growth, while a pore diameter of 186–200 μm was better for fibroblast growth. Moreover, a pore diameter of 290–310 μm showed faster bone formation than other pore diameters. Although these methods can be used to prepare the porous structure of bone biomaterials, there are some remaining problems. For example, solvent casting has the disadvantages of monotonous pore diameter and solvent residue;287 thermally induced phase separation allows for little control over the pore diameter and interconnectivity;37 and gas foaming does not allow for control over the pore diameter, and it is difficult to prepare a pore diameter >200 μm by this method.37 Most importantly, these methods cannot facilitate the preparation of a material that mimics the complex internal structure of natural bone, limiting their application in bone repair.
Rapid prototyping is an advanced manufacturing technology, and its use is considered a milestone in the manufacturing field.288 Based on the discrete-stacking principle, rapid prototyping can achieve the preparation of arbitrary shapes and structures, and has thus received increasing attention in the preparation of porous bone biomaterials.265,287,289,290 Current rapid prototyping technologies mainly include selective laser sintering (SLS),291,292 stereolithography (SLA),293,294 and fused deposition modeling (FDM).295 Duan et al296 fabricated ceramic/polymer composites using SLS and found that the composites had a controllable microstructure, fully interconnected porous structure, and high porosity. Kim et al297 reported that the osteogenic signal expression of BMSCs could be improved effectively by adjusting the pore diameter of the biomaterials prepared by SLA. Zein et al298 fabricated porous PCL by FDM and found that it had a honeycomb and highly interconnected porous structure, with a pore diameter of 160–770 μm and a porosity of 48%–77%. Bose et al also used FDM to fabricate TCP ceramics with a pore diameter of 300–480 μm and a pore volume of 29%–44%.299 Cell culture experiments indicated that the pore volume had a certain influence on cell growth and a significant influence on the mechanical properties of TCP. Salmoria et al300 fabricated porous PCL by SLS and revealed that the pore diameter and porosity could be controlled by adjusting the laser parameters.
As for Mg and its alloys, the porous structure is mainly prepared by space holding,301,302 mechanical drilling,303–305 laser drilling306,307, and selective laser melting (SLM).308 Among these methods, mechanical drilling and laser drilling can only prepare pores with a monotonous shape and structure, as well as a narrow pore diameter distribution and low porosity.309 Space holding is one of the most commonly used methods but is also limited because of the residue of space holding materials and the lack of control over the porous structure.310 Currently used space holding materials include sodium chloride,311 ammonium bicarbonate,244,312 urea,313 and Ti wires.314 SLM possesses unique advantages in the preparation of complex internal structures but has high processing and equipment requirements. Therefore, its use is still in the experimental stage. Cheng et al315 reported that bone biomaterials with a pore diameter >100 μm were beneficial for osteogenesis and vascularization and that the porosity should be >50%. They prepared porous Mg with a porosity of 55% using Ti wires with diameters of 250 and 400 μm as a space holding material (Figure 5a). In vivo experiments indicated that at the same porosity, Mg with a larger pore diameter could accelerate early vascularization and gene expression, thereby promoting new bone growth (Figure 5b and c). Kirkland et al316 developed a technique combining rapid prototyping and gravity casting to prepare topographically ordered porous Mg, where a porous sodium chloride (NaCl) mold was first created, and then Mg was cast into the mold. After removing the NaCl, porous Mg with a porosity of 41% and a pore diameter of 1 mm was obtained. It can be concluded that the porous Mg and alloys developed so far have a porous diameter ranging from 100 μm to 2 mm and a porosity ranging from 20% to 80%. Moreover, the pore diameter and porosity have significant influences on the mechanical properties and degradation rate. For example, dynamic immersion experiments indicated that the degradation rate of porous Mg increased rapidly with porosity, and in combination with the porous structure, this markedly deteriorated the mechanical stability of Mg, which decreased by 89% after only 3 days of immersion.317 Zhang et al318 also found that as the porosity increased from 33 to 54%, the compressive strength of porous Mg decreased from 30.3 to 11.1 MPa, which was far below the requirement for load-bearing bone.
Pore diameters of tens of micrometers
Currently, the methods for preparing pore diameters of tens of micrometers mainly include rapid prototyping, freeze-drying, and sol-gel fabrication. Marques et al319 prepared porous glass by a sol-gel foaming process. The pores were spherical with numerous circular interconnections between neighboring pores. Cox prepared porous HA by 3D printing.320 The surface showed micropores (10–60 μm) and numerous topographical irregularities, which were considered beneficial for osteoconduction and osteointegration in vivo . Liu et al321 prepared porous HA/silica sol/sodium tripolyphosphate composites by rapid prototyping. It was found that the surface pores (5–25 μm) were suitable for the adhesion and growth of osteoblast-like cells. Zhu et al322 reported a 3D porous chitosan/HA composite with an average pore diameter of 20 μm fabricated by freeze-drying (Figure 6a). It was revealed that the tunable chitosan/HA ratio of the composite could provide a biologically relevant microenvironment, thereby increasing the cell–cell and cell–matrix interactions, as found in natural bone (Figure 6b and c). Jelen et al323 developed discrete functionally graded biomaterials by a cross-linking process to mimic the graded structure of natural bone. The pore diameter ranged from several to tens of micrometers. Mechanical characterization of the graded biomaterials showed a marked anisotropy, as in cancellous bone. Du et al 324 prepared a series of 3D HA/PCL composites by SLS. The composites had uniform multi-scale porosity with pore diameters of 30–100 μm, as well as moderate mechanical properties and good biocompatibility. Nedjari et al325 prepared nanofibrous biomaterials with a gradient pore diameter ranging from 80 to 360 μm, depending on the honeycomb pattern size of the collector, which was beneficial for the regeneration of various bone tissues. A 3D macroporous nanowire nanoelectronic scaffold with a pore diameter of ~20 μm was also prepared to mimic the structure of natural bone.326 The results showed that the scaffold exhibited robust electronic properties and could be used alone or combined with other bone biomaterials as a biocompatible extracellular platform for the 3D culture of neurons, cardiomyocytes, and smooth muscle cells.
Pore diameters of submicro- and nanometers
Despite the considerable efforts that have been made to develop macro/microporous bone biomaterials and study their interactions with cells, porous biomaterials should also have nanofeatures to better match the nano-architecture of the ECM.327 An attempt was made to develop porous nanofibrous PLLA with a pore diameter down to the nanometer scale by the liquid–liquid phase separation method.328 Cell culture tests showed that the nanostructured PLLA acted as a positive cue to support stem cell differentiation and tissue growth, suggesting that the nanostructured porous PLLA has potential as a cell carrier in bone repair. Another study constructed a silkworm gland nanofibrous (SGN) biomaterial by electrospinning (Figure 7a).329 SEM images revealed that the biomaterial had a homogenous pore distribution, with nano/micropores of (219±39) nm and (201±22) μm in diameter, respectively (Figure 7b and c). Moreover, the biomaterial also showed well-defined interconnected pores, with a porosity of 85.3%±2.5%. In subsequent biological tests, the SGN 3D biomaterials efficiently attenuated the oxidative stress-induced cell damage and promoted the proliferation of adipose tissue-derived stem cells (ADSCs) while maintaining their cell lineage phenotypes (Figure 7d and e). A micro/nanohybrid surface structure was also fabricated on porous HA via hydrothermal treatment.330 The results showed that the micro/nanotopography of the surfaces significantly enhanced the cell adhesion and viability, alkaline phosphatase (ALP) activity, and mRNA expression levels of both the osteogenic markers and angiogenic factors of ADSCs. These findings suggested that the hierarchical micro/nanohybrid surface topography could act as a stem cell carrier. In addition, photolithography has also been applied to fabricate biomaterials with multiple types of micro/nanotopography for bone repair.331 The results demonstrated that pores with a suitable micro/nanotopography could guide and promote the responses of endothelial cells. Nanoscale pores were also introduced onto the surface of porous PLGA by chemical etching.332 The results showed that the nanoscale surface features promoted cell adhesion and growth, as well as elastin and collagen production. Recently, Kang et al333 designed an electrospun polyethylene oxide/PCL biomaterial with mesoporous bioactive nanocarriers to sequentially deliver two growth factors. The prepared biomaterial showed enlarged mesopores of ~7 nm, with a large surface area and pore volume. In vitro and in vivo experiments revealed that the mesoporous biomaterial acted as an efficient carrier for the long-term delivery of growth factors, thereby significantly promoting cell proliferation and bone formation. These studies revealed that the integration of nanofeatures into bone biomaterials could provide better control over cell functions via cell–nanofeature interactions.
Interactions between bone biomaterials and stem cells
In bone repair, bone biomaterials provide a platform for supporting stem cell adhesion and growth. It has been found that the chemical composition, surface properties, and topographical structure of bone biomaterials can directly affect the adhesion, proliferation, and differentiation of stem cells, as well as the formation of neovascularization networks. Stem cells are responsible for the osteogenic commitment and maturation of osteoblasts by secreting matrix components and promoting calcification, that is, the formation of new bone. In the above sections, we have introduced the research progress of bone biomaterials, and we will now discuss the seed stem cells and signaling pathways involved in the adhesion and osteogenic differentiation of stem cells mediated by biomaterials for bone repair.
Sources of stem cells
In recent years, stem cell-based regenerative medicine has unfolded as a new field of biomedicine. Because of their good proliferation ability and pluripotency, stem cells are increasingly used to accelerate wound healing and recover the function of impaired tissues and organs through stem cell transplantation and differentiation.
Embryonic stem cells (ESCs)
ESCs derived from the inner cell mass of blastocyst-stage embryos are very proliferative in their undifferentiated state. ESCs are the stem cells with the most potential.334 They have pluripotent characteristics, including the ability to undergo osteogenic differentiation.335–339 Tang et al first seeded ESCs into alginate microbeads in macroporous calcium phosphate cement and implanted the constructs into nude mice. Good cell viability, osteogenic differentiation, and mineral synthesis were demonstrated.340 Rutledge et al reported that porous PLGA with and without an ECM coating increased ESC proliferation and osteocalcin expression.341 However, the application of ESCs faces three major issues: ethical constraints, safety issues, and the tight control of in vitro conditions to regulate osteogenic differentiation.342
MSCs
MSCs are important members of the stem cell family and the most established and investigated stem cell type. MSCs are isolated from the early-stage mesoderm and ectoderm, and they are pluripotent. They were originally found in the bone marrow.343 Later, they were found to be abundant in the bone, adipose tissue, and synovial membrane, among other tissues. They have excellent potential in bone repair because of the following characteristics: (1) They have excellent proliferation and differentiation potential both in vivo and in vitro , and they can differentiate into any cell type, including osteoblasts and muscle cells. (2) They have a regulatory immune function; they can inhibit the proliferation and immune activity of T cells through the interactions between cells and cytokines. (3) They have the advantages of being conveniently sourced and easily separated, cultured, amplified, and purified. Additionally, MSCs maintain the characteristics of stem cells after multiple passages without immunological rejection. (4) They have low antigenicity and light allograft rejection, and the matching requirement is not strict. Thus far, several types of MSCs have been investigated for osteogenic differentiation.
Among various MSCs, BMSCs were first found and isolated and are currently the most commonly used MSCs in experimental and clinical trials. Because they are easily sourced, isolated and cultured and exhibit a strong potential for differentiation and autologous transplantation, they are considered optimal for use in clinical stem cell treatments.344,345 Recently, Berglund et al346 found that an Mg–Ca–Sr alloy possessed advantageous characteristics, including good mechanical strength and degradation behavior, and displayed potential osteogenic properties, which were characterized as ALP expression and RUNX2 activation. Yu et al347 found that mesoporous HA microspheres not only enhanced the expression of osteogenic markers in BMSCs but also promoted the migration and tube formation of EA.hy926 cells. In addition, PCL and PLA nanofibrous scaffolds were reported to be safe and non-toxic and could support the adhesion and proliferation of BMSCs.348
Umbilical cord (UC)-MSCs recently have gained attention because of their strong proliferation ability and multilineage differentiation potential.349,350 They have a better proliferation ability and lower immunogenicity and are more conveniently available than BMSCs. Furthermore, there is no ethical controversy surrounding their use. They have broad clinical applications in the regeneration of bone, cartilage, and muscle, among other tissues. Nano-HA/chitosan/PLGA scaffolds induced human UC-MSCs to differentiate into osteoblasts for the repair of calvarial defects in nude mice.351–353
Dental pulp stem cells (DPSCs) were originally isolated from human dental pulp by Gronthos in 2000.354 He found that DPSCs had similar characteristics, such as osteogenic ability and immunophenotype, to BMSCs, but a better proliferation ability. DPSCs have the capacity for self-renewal and the potential for multilineage differentiation into a variety of cell types. They can differentiate into cells found in bone, cartilage, vascular endothelium, and others through induction using different cytokines.355 They can also be used in the treatment of a variety of diseases by regulating immunity and anti-aging mechanisms. The attractive advantages of DPSCs can be summarized as follows: (1) there is a rich source of DPSCs in the naturally shed teeth of children 6–11 years of age, as well as in the wisdom teeth of adults, which are often removed and discarded as wastes. (2) Minor side effects: DPSCs are a type of MSCs with low immunogenicity, which would not be rejected when transplanted. (3) No ethical controversy: As DPSCs are derived from the naturally shed teeth of children and the wisdom teeth of adults, there would be no side effects for the donor. The differentiation and regeneration ability of DPSCs are impressive, suggesting the potential use of DPSCs for bone repair and regeneration.356,357 Therefore, DPSCs have gained increasing attention due to their favorable biological characteristics.
DPSCs were seeded on 3D TCP/poly(l-lactic acid/caprolactone) biomaterials and cultured in osteogenic medium containing vitamin D3 for 14 days. The results showed that DPSCs can be induced to differentiate into osteoblasts, indicating good osteogenic potential.358 Tricalcium silicate cement increased the expression of mineralization-associated genes (collagen type I alpha 1 (COL1A1), ALP, dentin sialophosphoprotein (DSPP), and RUNX2).359 Jensen et al360 reported that the functionalization of porous PCL with hyaluronic acid and TCP facilitated the migration and osteogenic differentiation of human DPSCs in vitro .
Induced pluripotent stem cells
Since Takahashi obtained induced pluripotent stem cells (iPSCs) by the transduction of transcription factors,361 iPSCs have shown wide prospects in bone repair. iPSCs exhibit potentially unlimited proliferation and pluripotent differentiation with no ethical controversies; thus, they are now considered an attractive option for osteogenic differentiation and bone regeneration. Recent discoveries have demonstrated that iPSCs could differentiate into osteoblasts.362 The differentiation of ESCs or iPSCs into bone cells has been adapted from the protocols for the osteogenic differentiation of MSCs. The basic components of the commonly used osteogenic medium are fetal bovine serum, ascorbic acid, β-glycerophosphate, and Dex. Additional enhancing supplements include certain bone morphogenetic proteins (BMPs) or the calcium-regulating hormone vitamin D3. Recently published data offers some indications of bone-like and mineralized tissue formation by iPSCs in vivo ,363,364 suggesting that iPSCs have the potential to be applied in bone repair.
Osteoblasts derived through transdifferentiation
Transdifferentiation occurs when one type of differentiated cell is transformed into another type of differentiated cell.365 This is a technique that has been developed in recent years, and osteoblasts obtained by transdifferentiation through transcription factors, cytokines, small molecules, microRNA, and epigenetic regulation are emerging. Tansriratanawong et al366 reported that dedifferentiated fat cells (DFATs) revealed osteogenic differentiation when co-cultured with periodontal ligament stem cells. They found that DFATs attenuated proliferation while enhancing osteogenic gene expression (RUNX2); however, their adipogenic characteristics diminished. DFATs and the co-culture system might be a novel cell-based therapeutic method for promoting osteogenic differentiation in periodontal regeneration. Cho et al reported that the epigenetic modification of Wnt3a by BMP-2 revealed a new mechanism in the morphogen-mediated control of osteogenesis. In their study, the CpG-demethylating agent 5-aza-2-deoxycytidine or the histone deacetylase inhibitor trichostatin A was used to decrease the methylation and increase the acetylation of histone H3 lysine 9 specifically in non-osteogenic cells, which contributed to the direct transdifferentiation of pre-adipocyte fibroblasts into osteoblasts.367 Though at the primary stage, this strategy would be promising for application in bone repair.
The effect of biomaterials on stem cells
While many sources can be selected, the potential of different cells differs from one another. To induce the osteogenic differentiation of stem cells, a befitting; microenvironment is required. Ideal biomaterials for bone repair should have the following characteristics: (1) osteoconductivity, which can provide a place for blood vessel formation and bone ingrowth with a certain mechanical strength; (2) osteoinductivity, which can induce the expression of osteogenic proteins and stimulate surrounding stem cells to differentiate into chondrocytes or osteoblasts, followed by mineralization and calcification until new bone formation is achieved; and (3) osteogenesis, which can induce the differentiation of progenitor cells, osteoblasts, and bone progenitors into osteoblasts or their maturation. The interactions between bone biomaterials and stem cells include three steps: adhesion, proliferation, and differentiation (Figure 8).
The adhesion and proliferation of stem cells
Cells, including stem cells, can sense multiple extracellular signals from their microenvironment and simultaneously convert them into coherent environmental signals to regulate cell behavior. Nonspecific adhesion generally occurs through van der Waals, ionic, and electrostatic forces. In comparison, specific adhesion is mediated by the ECM, including collagen I, fibronectin, peptides, growth factors, glucosamine, and other active molecules, and is induced by activating receptors on the surface of the cell membrane and transducing the chemical signal into the cell, thereby modulating a series of biological cellular activities.368,369 Bone biomaterials can affect the secretion of the ECM and act as an ECM to interact with stem cells.
The cell adhesion process consists of a series of cascaded reactions, which can be divided into four steps: cell adhesion, cell spreading, cytoskeletal organization, and the formation of focal adhesions (Figure 9).370 Initial adhesion plays a critical role in cell differentiation and long-term stability.371 The initial adhesion between cells and biomaterials is mediated by ionic bonding or van der Waals forces, and the interaction is fast and transient. The adhesion promotes the interaction between the ECM and the integrin or transmembrane receptor, resulting in the formation of focal adhesion plaques. The cytoplasmic domain of the integrin receptor links to some adaptor proteins (for example, talin, vinculin, tensin, and paxillin), which further link to actin filaments. The ECM–integrin–cytoskeleton axis mediates the adhesion process, which not only regulates cell-biomaterial adhesion but is also responsible for the signal transduction from outside of the cell to within the cell membrane (Figure 9). Integrins link the ECM with the cytoskeleton by focal adhesion components and activate focal adhesion kinase (FAK) and Src kinase. FAK phosphorylates two other groups, paxillin and Crk-associated substrate (p130cas), which enable the bonding of the signal adaptor protein with the focal adhesion.372,373 This process is accompanied by actin assembly and FAK dynamic changes, which are involved in cell adhesion, spreading, invasion, proliferation, and apoptosis. Cell adhesion can also activate other intracellular signaling pathways, such as the mitogen-activated protein kinase (MAPK) signaling pathway.374–376
Cell-ECM adhesion is mediated by the binding of ligands (including elastic fibers, collagen family members, proteoglycans, glycosaminoglycans, and adhesive glycoproteins) to the integrin receptors.370 Apart from the abovementioned ligands, the ECM also contains organic materials with excellent mechanical and biological properties. Currently, bioactive ceramics, as well as biodegradable polymers and biodegradable metals, are considered promising biomaterials in bone repair. As organic materials, biodegradable polymers can act as an ECM for cell attachment, and adhesion is promoted by combining the polymer with ligands.377,378 Natural polymers, such as albumin, alginate, amylose/amylopectin, chitosan, collagen, elastin, fibrin, fibronectin, hyaluronic acid, keratin, and silk, are applicable and can promote cell adhesion.379 For better cell adhesion, polymers are often coated with fibronectin or laminin, while bioactive ceramics are often coated with collagen I/III or fibronectin.380 It remains a technological challenge to prepare topographical gradients of inorganic biomaterials because of their inherent material properties.381,382 The use of biodegradable metals in direct contact with MSCs has not yet been reported. However, their surfaces were coated with an ECM-like serum from the medium and hence have shown relatively good compatibility.383–385 At the same time, the identification of some novel ligands, such as FHOD1 and CD82, has also inspired exploration of the mechanism of cell–matrix adhesion and cell migration in 3D microenvironments.386–388
The osteogenic differentiation of stem cells
A 3D implant and seeded cells form a local microenvironment, which consists of various chemicals, mechanical stresses, and growth factors. These components act as active molecules and activate the adhesion/proliferation/differentiation signaling pathways for the adsorption of stem cells onto biomaterials. Shih et al 389 found that calcium phosphate induced the differentiation of stem cells into osteoblasts (bone-building cells) by the following mechanism: phosphate ions dissolved from these biomaterials were absorbed by stem cells to form important metabolic molecules (for example, ATP), and then the ATP metabolites (adenosine) sent signals to stem cells and induced them to differentiate into osteoblasts. They also reported that the small-molecule adenosine can induce stem cells to differentiate into osteoblasts.390 Porous titanium dioxide (TiO2) coated with alginate hydrogel containing various concentrations of simvastatin induced the osteogenic differentiation of human adipose tissue-derived (hAD)-MSCs. COL1A1, ALP, osteopontin (OPN), osteocalcin (OCN), and vascular endothelial growth factor (VEGF) A were enhanced in hAD-MSCs.391
Ren et al392 described a nanoparticulate mineralized collagen glycosaminoglycan implant, which induced the healing of critical-sized rabbit cranial defects without the addition of expanded stem cells or exogenous growth factors. This strategy may provide novel growth factor-free and ex vivo progenitor cell culture-free implants for bone repair. Luo et al also reported graphene oxide (GO)-doped PLGA nanofibers prepared by electrospinning for enhancing the osteogenic differentiation of MSCs. They demonstrated that GO not only enhanced the hydrophilic performance and protein- and inducer-adsorption abilities of the nanofibers but also accelerated the adhesion, proliferation, and osteogenic differentiation of human MSCs (hMSCs).393 Our research group and Li et al almost simultaneously reported that boron nitride nanotubes could promote the differentiation of MSCs into osteoblasts, which was confirmed in animal models.394,395
Although some biomaterials (mainly inorganic materials) have been reported to be capable of inducing the osteogenic differentiation of pluripotent stem cells independent of cytokines or growth factors, most of the relevant molecular mechanisms are still not well defined.
The mechanisms by which biomaterials initiate or enhance the osteogenic differentiation of stem cells
The biphasic calcium phosphate ceramic-mediated secretion of signaling molecules, inflammatory factors (interleukin 1, interleukin 6, and monocyte chemoattractant protein 1), and growth factors (VEGF, platelet-derived growth factor, and epidermal growth factor) by macrophages were upregulated and promoted cell migration and the gene expression of osteogenic markers [ALP, collagen type I, osterix (OSX), bone sialoprotein, and OPN].396 Low-magnitude, high-frequency vibrations promoted the adhesion and osteogenic differentiation of BMSCs cultured on a HA-coated surface through Wnt/β-catenin signaling.397 Hao et al398 found that compared with –OEG and –CH3 groups, –PO3H2, –OH, –NH2, and –COOH on the self-assembled alkanethiol monolayers on gold promoted not only cell adhesion, proliferation, and osteogenic differentiation but also the expression of αv and β1 integrins. Graphene/CNT hybrids promoted the osteogenic differentiation of MSCs by activating the p38 signaling pathway.399 Mg ions resulting from the degradation of bone biomaterials can promote the release of neurotransmitters [for example, calcitonin gene-related peptide (CGRP)] in the periosteal part of the sensory nerve terminal; the increased CGRP level further promotes the periosteal osteogenic differentiation of stem cells and the final formation of large amounts of new bone in periosteal regions.400 Sr ions can enhance the osteogenic differentiation of MSCs and in vivo bone formation by activating the BMP signaling pathways.401,402
The ECM is an active and complex microenvironment with outstanding biomechanical, biophysical, and biochemical characteristics, which can indirectly or directly influence cell adhesion, migration, proliferation, and differentiation, as well as tissue and organ regeneration. Biomaterials mimicking the tissue-specific physicochemical properties of the ECM are being developed at a rapid pace to regulate stem cell fate. The activation of respective receptors responding to different ligands leads to the activation of different signaling pathways involved in the biomaterial-induced osteogenic differentiation of stem cells, as illustrated in Figure 10.
Transforming growth factor β/BMP pathway
BMPs have a high affinity for the type I receptor BMPR1A and a low affinity for the type II receptor BMPR2. Transforming growth factor β (TGF-β) activates TGF-β signaling through binding to TGFBR2 and TGFBR1. The activation of these two receptor classes further promotes the phosphorylation of Smad proteins. TGF-β signaling has a complex effect on bone formation. It can induce synthesis of the ECM and promote the differentiation of osteoblasts; additionally, it is associated with the chemotaxis of osteoblast-like cells to the ECM and the recognition of target cells. BMPs were first isolated from a mineralized bone matrix extract, and they can induce the differentiation of the undifferentiated MSCs into bone cells, followed by collagen synthesis and calcified bone tissue formation. BMP-2, BMP-4, BMP-5, and BMP-7 can effectively promote the differentiation of BMSCs into osteoblasts and induce bone formation; among them, BMP-2 exhibits the strongest activity. There are BMP receptors on the cell membrane. These receptors are activated by BMP binding or mechanical stimulation and then act on the downstream Smad protein in the cytoplasm. Smad protein is an intracellular signal transduction protein that was recently discovered. Among the family members, Smad1 and Smad5 are associated with osteoblast differentiation. Smad1, Smad5, and Smad8 terminal serine residues are phosphorylated by BMP receptors, and then heterotrimers or heterodimers formed by 2 or 1 R-Smad and Smad4 enter the nucleus, activating osteoblast-specific transcription factors (RUNX2 and OSX) and corresponding downstream targets.403,404 In fact, there are some applications of BMP-2 as an important cofactor to support bone regeneration on various scaffolds. BMP-2-loaded biphasic calcium phosphate significantly promoted the ratio of bone volume/tissue volume in vivo compared with that without BMP-2.405
Wnt/β-catenin signaling pathway
The Wnt/β-catenin signaling pathway is associated with organ development, especially osteogenic differentiation. Wnt protein comprises a series of highly conserved secretory glycoproteins. A total of 19 members have been found, and the different members have unique secretory patterns and play different roles in embryonic development. Wnt protein is composed of 350–380 amino acids and can be divided into classical Wnt proteins (Wnt1, Wnt2, Wnt3, and Wnt3a) and non-classical Wnt proteins (Wnt4, Wnt5a, Wnt5b, Wnt6, Wnt7a, and Wntl1, among others). The classical Wnt proteins interact with the Frizzled/LRP (Fzd/LRP) receptor and activate the Wnt/β-catenin classical pathway, while non-classical Wnt proteins bind to the Fzd receptor, activating heterotrimeric G protein and regulating the intracellular level of Ca ions. The combination of Wnt protein with the Fzd/LRP receptor activates the second messenger, causing the accumulation of cytoplasmic β-catenin. The accumulated β-catenin subsequently enters the nucleus and interacts with T cell transcription factor and lymphoid enhancer factor, which bind to the promoters of RUNX2 and OSX and activate their transcription.406
MAPK signaling pathway
Among the MAPK family members, extracellular signal-regulated kinase (ERK), p38, and c-Jun N-terminal kinase (JNK) are involved in the signal transduction of hMSC osteogenic differentiation. The ERK pathway can be activated throughout the development of stem cells and is closely related to cell proliferation and differentiation, while the p38 and JNK signaling pathways may play a role in the late stages of cell differentiation or apoptosis. The current mechanism of the ERK pathway is well defined. When in contact with osteoblast precursors, the ECM can bind with the integrin receptor of the cell surface and induce receptor dimerization, autophosphorylation, and FAK activation. As a result, FAK activates Ras, which further promotes transcription factors to initiate the expression of specific genes through conservative enzymatic cascades. It is known that ERK5 and ERK1/2 can activate the expression of the immediate early genes c-Fos and c-Jun.407 In addition, when hMSCs are added to the culture medium, the activity of ERK is activated after 7–11 days, and the differentiation of hMSCs is promoted by c-Jun. JNK is activated after 13–17 days, and ECM synthesis and calcium deposition increases. Other non-collagenous proteins, such as laminin 5 and matrix protein 3, can induce the expression of Cbfa-1 and ALP through the ERK1/2 signaling pathway and can enhance the matrix mineralization and osteogenic differentiation of hMSCs.408 Together, these results suggest that the MAPK signaling pathway plays an important role in the osteogenic differentiation of hMSCs.
Hedgehog signaling pathway
The activation of the Hedgehog signaling pathway can promote the osteogenic differentiation of BMSCs through the key downstream molecules Smoothened (Smo) and Gli1, and then activate mTORC2-Akt signaling by IGF. Transport protein 80, located in the flagellar structure, activates canonical Hh-Smo-Ptch1-Gli signaling and inhibits non-classical Hh-Gαi-RhoA signaling, and then promotes differentiation into osteoblasts. The Hedgehog signaling pathway can promote bone differentiation and matrix mineralization in combination with the BMP and Wnt signaling pathways, and an in vivo study using a bone transplantation model confirmed the effect of these signaling pathways on bone formation and bone defect healing.409–411
Notch signaling pathway
In vitro studies have confirmed that the activation of the Notch signaling pathway can inhibit the differentiation and promote the proliferation of osteoblasts. The persistent activation of Notch inhibits the differentiation of MSCs into osteoblasts, resulting in decreased bone mass. Kohn et al412 showed that Notch2 played a leading role in the inhibition of bone formation through activated Notch protein, the Notch intracellular domain (NICD), and RBPjkappa. Hilton et al showed that Hes and Hey proteins inhibited osteoblast differentiation and regulated the activity of OCN and OPN gene promoters through interacting with RUNX2. Some studies showed that overexpression of NICD at the cellular level stimulated the proliferation of osteoblasts in the early stages but prevented them from growing into mature osteoblasts.413 The Notch signaling pathway can also enhance the proliferation of osteoblasts through the upregulation of cyclin D and cyclin E.414
We introduced several signaling pathways that induce the osteogenic differentiation of MSCs by responding to different stimuli, including growth factors, cytokines, physical stresses, topographical features, and chemical factors. In fact, activation of any of the above signaling pathways will lead to osteogenic differentiation, and the combination of several pathways will promote and accelerate the process.
The progress of vasculogenesis promoted by bone biomaterials
It is also important to promote vasculogenesis, especially in large segmental defects. Some of the biomaterials used for bone tissue engineering can stimulate the formation of new vessels. Although it has been widely investigated, how biomaterials affect the formation of new vessels is still not well understood. The several examples here provide some information about the advances in this field in recent years. Low concentrations of HA not only promoted bone regeneration but also positively affected the formation of an endothelial network in collagen/fibrin hydrogels in vitro . However, the responses were not obvious in vivo .415 β-TCP and calcium-deficient HA ceramics shared similar properties to promote the proliferation and differentiation of endothelial cells.416 Sr and Si ion-containing bioceramics exerted synergistic effects on osteogenesis, osteoclastogenesis, and angiogenesis due to the effects of Si ions on enhancing osteogenesis and the effects of Sr ions on enhancing angiogenesis in vitro and in vivo . Sr and Co ions improved both the osteogenesis and angiogenesis of human osteosarcoma cells and human umbilical vein endothelial cells co-cultured with bioactive glasses.417 Recently, a study demonstrated that Cu ion-containing bioactive glass significantly promoted the expression of the HIF-1a gene, which upregulated the expression of osteogenesis-related genes (including S100A10, BMP-2, and OCN) and angiogenesis-related genes (such as VEGF).418,419 Some advanced materials, such as graphene, were reported to promote the secretion of angiogenesis-related proteins, such as von Willebrand factor and angiotensin 1, as well as angiogenesis.420 More attention has been focused on the combination of several materials with different properties.421–423
Summary and perspectives
The development of bone biomaterials to mimic the material properties and porous structure of natural bone is now under extensive investigation. These studies have focused on developing ideal biomaterials with a combination of satisfactory biological and mechanical properties, constructing a cell microenvironment with a multi-scale porous structure, and inducing the oriented differentiation of stem cells for artificial-to-biological transformation.
Regarding bone biomaterials, recent studies have focused on bioactive and/or biodegradable biomaterials, including bioactive ceramics, biodegradable polymers, and biodegradable metals. Bioactive ceramics have inorganic constituents similar to those of natural bone and possess excellent biocompatibility and bioactivity. However, their inherent brittleness and low toughness limit their application in bone repair. In comparison, biodegradable polymers possess a relatively high toughness and plasticity, and their performance can be modulated by molecular design and fabrication methods. However, there is a contradiction between the mechanical properties and degradation rate, while synthetic biodegradable polymers always have a poor cell affinity and much lower strength than natural bone. As biodegradable metals, biomedical Mg and its alloys are stronger than biodegradable polymers and tougher than bioactive ceramics. However, the rapid loss of mechanical integrity and the accumulation of corrosion products caused by rapid degradation have long been major problems for Mg and its alloys. Therefore, a single type of bone biomaterial can hardly meet the multiple requirements for application in bone repair. To meet the requirements of both the mechanical and biological properties, many researchers have tried to combine different types of bone biomaterials, hoping to combine the advantages of each biomaterial while overcoming their disadvantages.
As for the cell microenvironment, although many of its specific biological functions are still unclear, attempts to mimic the microenvironment by designing bone biomaterials with a porous structure have continued. Especially in recent years, the construction of a cell microenvironment has become a common focus of multiple disciplines, including engineering, medical, and materials sciences. On the one hand, there is a basic agreement about the functions of different pore diameters, and the relationship between the porous structure of bone biomaterials and cell behavior has been experimentally studied. However, the mechanisms of energy interactions and functions of the porous structure with respect to cells/tissues remain unclear. Related studies have focused on a single-scale porous structure, but the formation mechanism of a cell microenvironment with a multi-scale porous structure remains to be studied. On the other hand, in consideration of the different characteristics of bone biomaterials, various methods have been developed to prepare porous structures, including gas foaming and freeze-drying, among others. These methods can prepare materials with pore diameters ranging from hundreds of micrometers to nanometers but often lack control over the porous structure. The development of rapid prototyping resolves the above problems to a large extent, as it can be used to precisely control the pore diameter, porosity, and pore interconnectivity of bone biomaterials. However, it is limited by the available types and compositions of raw materials; additionally, it is difficult to prepare a submicro- and nanoscale porous structure. Therefore, the porous structures developed so far remain largely different from that of natural bone.
With the development of new stem cell-based techniques, there are many more choices of seed stem cells for bone repair, such as iPSCs and transdifferentiation-derived osteoblasts. However, the tumorigenic potential, limited sources, and low transdifferentiation efficiency of iPSCs are the main challenges surrounding their application. There are still many obstacles to overcome. In comparison, the potential of several MSCs, such as DPSCs and UC-MSCs, is encouraging, as they have rich sources, noninvasive harvesting techniques, and excellent self-renewal and proliferative capacities. Although the detailed molecular mechanisms regarding how bone biomaterials induce the osteogenic differentiation of stem cells are still largely unknown, some evidence has demonstrated that associated signaling pathways may be involved in the process. For example, the P ions dissolved from bone biomaterials can be absorbed by stem cells to form ATP metabolites, which send signals to stem cells and induce osteogenic differentiation. The release of Mg and Sr ions from bone biomaterials could enhance osteogenic differentiation through promoting the concentration of CGRP and activating the BMP signaling pathway, respectively.
Notwithstanding the intensive efforts and great achievements behind biomaterials and their interactions with stem cells, the bone biomaterials developed thus far still have some deficiencies, and there is plenty of room for improvement: (1) develop new preparation methods for bone biomaterials from the perspectives of histology, cytology, and molecular biology. According to different needs, filter the prepared bone biomaterials and seek the optimal combination; subsequently, develop composite bone biomaterials with satisfactory biological and mechanical properties. (2) Explore the mechanisms of energy interaction and functions of the porous structure with cells/tissues at the molecular level; reveal the formation mechanism of the microenvironment with the synergistic effect of the multi-scale porous structure; seek the optimal composition of a multi-scale porous structure, and thus provide theoretical guidance for the design and manufacture of the porous structure. (3) Develop cross-scale methods for preparing the multi-scale porous structure; the combination of several methods is a promising direction for preparing porous bone biomaterials. (4) Develop novel surface micro/nanostructures for bone biomaterials to improve their ability to provide biochemical signals for cells, thereby facilitating the oriented differentiation of stem cells and achieving artificial-to-biological transformation. (5) The molecular mechanism of stem cell lineage commitment by biomaterials has not been well defined. Thus, further efforts should be made to elucidate the differentiation mechanisms and seek novel biomaterials with better osteoinductivity. In summary, developing bone biomaterials with material compositions, geometric structures, and physiological functions similar to those of natural bone and investigating their interactions with stem cells for bone repair remain significant avenues for future research.
References
Lu H, Liu Y, Guo J et al. Biomaterials with antibacterial and osteoinductive properties to repair infected bone defects. Int J Mol Sci 2016; 17: 334.
Maksimkin AV, Senatov FS, Anisimova NY et al. Multilayer porous UHMWPE scaffolds for bone defects replacement. Mater Sci Eng C Mater Biol Appl 2017; 73: 366–372.
Terranova L, Mallet R, Perrot R et al. Polystyrene scaffolds based on microfibers as a bone substitute; development and in vitro study. Acta Biomater 2016; 29: 380–388.
Klein-Nulend J, van Oers RF, Bakker AD et al. Nitric oxide signaling in mechanical adaptation of bone. Osteoporos Int 2014; 25: 1427–1437.
Montazerolghaem M, Rasmusson A, Melhus H et al. Simvastatin-doped pre-mixed calcium phosphate cement inhibits osteoclast differentiation and resorption. J Mater Sci Mater Med 2016; 27: 83.
Yang F, Wang J, Hou J et al. Bone regeneration using cell-mediated responsive degradable PEG-based scaffolds incorporating with rhBMP-2. Biomaterials 2013; 34: 1514–1528.
Shadjou N, Hasanzadeh M . Bone tissue engineering using silica-based mesoporous nanobiomaterials: recent progress. Mater Sci Eng C Mater Biol Appl 2015; 55: 401–409.
Ishack S, Mediero A, Wilder T et al. Bone regeneration in critical bone defects using three-dimensionally printed β-tricalcium phosphate/hydroxyapatite scaffolds is enhanced by coating scaffolds with either dipyridamole or BMP-2. J Biomed Mater Res B Appl Biomater 2017; 105: 366–375.
Bian L, Mak AFT, Wu C et al. A model for facilitating translational research and development in China: call for establishing a Hong Kong Branch of the Chinese National Engineering Research Centre for Biomaterials. J Orthop Transl 2014; 2: 170–176.
Wang C, Wang S, Li K et al. Preparation of laponite bioceramics for potential bone tissue engineering applications. PLoS One 2014; 9: e99585.
Simpson AH, Murray IR . Main differences in osteoporotic fracture models: which should I use? Injury 2016; 47 (Suppl 1): S15–S20.
Andric T, Sampson AC, Freeman JW . Fabrication and characterization of electrospun osteon mimicking scaffolds for bone tissue engineering. Mater Sci Eng C 2011; 31: 2–8.
Yunus Basha R, Sampath Kumar TS, Doble M . Design of biocomposite materials for bone tissue regeneration. Mater Sci Eng C Mater Biol Appl 2015; 57: 452–463.
Goto T, Sasaki K . Effects of trace elements in fish bones on crystal characteristics of hydroxyapatite obtained by calcination. Ceram Int 2014; 40: 10777–10785.
Elias CN, Meyers MA, Valiev RZ et al. Ultrafine grained titanium for biomedical applications: an overview of performance. J Mater Res Technol 2013; 2: 340–350.
Nguyen LH, Annabi N, Nikkhah M et al. Vascularized bone tissue engineering: approaches for potential improvement. Tissue Eng Part B Rev 2012; 18: 363–382.
Mckittrick J, Chen PY, Tombolato L et al. Energy absorbent natural materials and bioinspired design strategies: a review. Mater Sci Eng C 2010; 30: 331–342.
Hanson Ma, Gluckman P . Early developmental conditioning of later health and disease: physiology or pathophysiology? Physiol Rev 2014; 94: 1027–1076.
Webber MJ, Khan OF, Sydlik SA . A perspective on the clinical translation of scaffolds for tissue engineering. Ann Biomed Eng 2015; 43: 641–656.
Chaudhari AA, Vig K, Baganizi DR et al. Future prospects for scaffolding methods and biomaterials in skin tissue engineering: a review. Int J Mol Sci 2016; 17: 1974.
Kundu J, Pati F, Jeong YH et al. Biomaterials for biofabrication of 3D tissue scaffolds. Gabor F, Wei S (eds). Biofabrication: Micro- and Nano-Fabrication, Printing, Patterning and Assemblies. Waltham: William Andrew, 2013: 23–46.
Gerhardt LC, Boccaccini AR . Bioactive glass and glass-ceramic scaffolds for bone tissue engineering. Materials 2010; 3: 3867–3910.
Comesaña R, Lusquiños F, Del VJ et al. Toward smart implant synthesis: bonding bioceramics of different resorbability to match bone growth rates. Sci Rep 2015; 5: 10677.
Habib FN, Nikzad M, Masood SH et al. Design and development of scaffolds for tissue engineering using three-dimensional printing for bio-based applications. 3D Print Addit Manuf 2016; 3: 119–127.
Liu Y, Kim JH, Young D et al. Novel template-casting technique for fabricating β-tricalcium phosphate scaffolds with high interconnectivity and mechanical strength and in vitro cell responses. J Biomed Mater Res A 2010; 92: 997–1006.
Fedorovich NE, Alblas J, Hennink WE et al. Organ printing: the future of bone regeneration? Trends Biotechnol 2011; 29: 601–606.
Saiz E, Zimmermann EA, Lee JS et al. Perspectives on the role of nanotechnology in bone tissue engineering. Dent Mater 2013; 29: 103–115.
Hench LL . The future of bioactive ceramics. J Mater Sci Mater Med 2015; 26: 86.
Kraus KH, Kirkerhead C . Mesenchymal stem cells and bone regeneration. Vet Surg 2006; 35: 232–242.
Kolk A, Handschel J, Drescher W et al. Current trends and future perspectives of bone substitute materials—from space holders to innovative biomaterials. J Cranio Maxill Surg 2012; 40: 706–718.
Kocabey S, Ceylan H, Tekinay AB et al. Glycosaminoglycan mimetic peptide nanofibers promote mineralization by osteogenic cells. Acta Biomater 2013; 9: 9075–9085.
Floren M, Migliaresi C, Motta A . Processing techniques and applications of silk hydrogels in bioengineering. J Funct Biomater 2016; 7: 26.
Fu Q, Saiz E, Rahaman MN et al. Bioactive glass scaffolds for bone tissue engineering: state of the art and future perspectives. Mater Sci Eng C Mater Biol Appl 2011; 31: 1245–1256.
Wagoner Johnson AJ, Herschler BA . A review of the mechanical behavior of CaP and CaP/polymer composites for applications in bone replacement and repair. Acta Biomater 2011; 7: 16–30.
Zreiqat H, Ramaswamy Y, Wu C et al. The incorporation of strontium and zinc into a calcium-silicon ceramic for bone tissue engineering. Biomaterials 2010; 31: 3175–3184.
Bosco R, Beucken JVD, Leeuwenburgh S et al. Surface engineering for bone implants: a trend from passive to active surfaces. Coatings 2012; 2: 95–119.
Bose S, Vahabzadeh S, Bandyopadhyay A . Bone tissue engineering using 3D printing. Mater Today 2013; 16: 496–504.
Webber MJ, Appel EA, Meijer E et al. Supramolecular biomaterials. Nat Mater 2016; 15: 13–26.
Salinas A, Esbrit P, Valletregi M . A tissue engineering approach based on the use of bioceramics for bone repair. Biomater Sci 2012; 1: 40–51.
Zhang Q, Mochalin VN, Neitzel I et al. Mechanical properties and biomineralization of multifunctional nanodiamond-PLLA composites for bone tissue engineering. Biomaterials 2012; 33: 5067–5075.
Baradaran S, Moghaddam E, Basirun WJ et al. Mechanical properties and biomedical applications of a nanotube hydroxyapatite-reduced graphene oxide composite. Carbon 2014; 69: 32–45.
Wang C, Shen H, Tian Y et al. Bioactive nanoparticle-gelatin composite scaffold with mechanical performance comparable to cancellous bones. ACS Appl Mater Interfaces 2014; 6: 13061–13068.
Dou Y, Wu C, Chang J . Preparation, mechanical property and cytocompatibility of poly(l-lactic acid)/calcium silicate nanocomposites with controllable distribution of calcium silicate nanowires. Acta Biomater 2012; 8: 4139–4150.
Lvov Y, Abdullayev E . Functional polymer-clay nanotube composites with sustained release of chemical agents. Prog Polym Sci 2013; 38: 1690–1719.
Bose S, Roy M, Bandyopadhyay A . Recent advances in bone tissue engineering scaffolds. Trends Biotechnol 2012; 30: 546–554.
Bose S, Banerjee D, Bandyopadhyay A . Introduction to biomaterials and devices for bone disorders. Bose S, Bandyopadhyay A (eds). Materials and Devices for Bone Disorders. London: Academic Press, 2016: 1–2.
Zheng YF, Gu XN, Witte F . Biodegradable metals. Mater Sci Eng R 2014; 77: 1–34.
Windhagen H, Radtke K, Weizbauer A et al. Biodegradable magnesium-based screw clinically equivalent to titanium screw in hallux valgus surgery: short term results of the first prospective, randomized, controlled clinical pilot study. Biomed Eng Online 2013; 12: 62.
Mohanapriya S, Mumjitha M, Purnasai K et al. Fabrication and characterization of poly(vinyl alcohol)-TiO2 nanocomposite films for orthopedic applications. J Mech Behav Biomed 2016; 63: 141–156.
Agarwal S, Curtin J, Duffy B et al. Biodegradable magnesium alloys for orthopaedic applications: a review on corrosion, biocompatibility and surface modifications. Mater Sci Eng C Mater Biol Appl 2016; 68: 948–963.
Wen CE, Xiong JY, Li YC et al. Porous shape memory alloy scaffolds for biomedical applications: a review. Phys Scr 2010; 2010: 561–578.
Lin K, Xia L, Li H et al. Enhanced osteoporotic bone regeneration by strontium-substituted calcium silicate bioactive ceramics. Biomaterials 2013; 34: 10028–10042.
Lalwani G, Henslee AM, Farshid B et al. Tungsten disulfide nanotubes reinforced biodegradable polymers for bone tissue engineering. Acta Biomater 2013; 9: 8365–8373.
Wang S, Wang X, Draenert FG et al. Bioactive and biodegradable silica biomaterial for bone regeneration. Bone 2014; 67: 292–304.
Wang J, Witte F, Xi T et al. Recommendation for modifying current cytotoxicity testing standards for biodegradable magnesium-based materials. Acta Biomater 2015; 21: 237–249.
Hench LL . The story of Bioglass®. J Mater Sci Mater Med 2006; 17: 967–978.
Miguez-Pacheco V, Hench LL, Boccaccini AR . Bioactive glasses beyond bone and teeth: emerging applications in contact with soft tissues. Acta Biomater 2015; 13: 1–15.
He C, Jin X, Ma PX . Calcium phosphate deposition rate, structure and osteoconductivity on electrospun poly (L-lactic acid) matrix using electrodeposition or simulated body fluid incubation. Acta Biomater 2014; 10: 419–427.
Eliaz N, Metoki N . Calcium Phosphate bioceramics: a review of their history, structure, properties, coating technologies and biomedical applications. Materials 2017; 10: 334.
Pan YK, Chen CZ, Wang DG et al. Preparation and bioactivity of micro-arc oxidized calcium phosphate coatings. Mater Chem Phys 2013; 141: 842–849.
Duer MJ . The contribution of solid-state NMR spectroscopy to understanding biomineralization: atomic and molecular structure of bone. J Magn Reson 2015; 253: 98–110.
Cheng F, Sun K, Zhao Y et al. Synthesis and characterization of HA/YVO4: Yb3+, Er3+ up-conversion luminescent nano-rods. Ceram Int 2014; 40: 11329–11334.
Feng P, Niu M, Gao C et al. A novel two-step sintering for nano-hydroxyapatite scaffolds for bone tissue engineering. Sci Rep 2014; 4: 5599.
Abidi SSA, Murtaza Q . Synthesis and characterization of nano-hydroxyapatite powder using wet chemical precipitation reaction. J Mater Sci Technol 2014; 30: 307–310.
Xie C, Lu X, Wang K et al. Pulse electrochemical driven rapid layer-by-layer assembly of polydopamine and hydroxyapatite nanofilms via alternative redox in situ synthesis for bone regeneration. ACS Biomater Sci Eng 2016; 2: 920–928.
Shuai C, Li P, Liu J et al. Optimization of TCP/HAP ratio for better properties of calcium phosphate scaffold via selective laser sintering. Mater Charact 2013; 77: 23–31.
Tarafder S, Bose S . Polycaprolactone-coated 3D printed tricalcium phosphatescaffolds for bone tissue engineering: in vitro alendronate release behavior and localdelivery effect on in vivo osteogenesis. ACS Appl Mater Interfaces 2014; 6: 9955–9965.
He F, Qian G, Ren W et al. Fabrication of β-tricalcium phosphate composite ceramic sphere-based scaffolds with hierarchical pore structure for bone regeneration. Biofabrication 2017; 9: 025005.
Bruder SP, Kraus KH, Goldberg VM et al. The effect of implants loaded with autologous mesenchymal stem cells on the healing of canine segmental bone defects. J Bone Joint Surg 1998; 80: 985–996.
Elsayed H, Rincón Romero A, Ferroni L et al. Bioactive glass-ceramic scaffolds from novel ‘inorganic gel casting’and sinter-crystallization. Materials 2017; 10: 171.
Maehira F, Miyagi I, Eguchi Y . Effects of calcium sources and soluble silicate on bone metabolism and the related gene expression in mice. Nutrition 2009; 25: 581–589.
Zhou X, Zhang N, Mankoci S et al. Silicates in orthopaedics and bone tissue engineering materials. J Biomed Mater Res A 2017; 105: 2090–2102.
Henstock JR, Canham LT, Anderson SI . Silicon: the evolution of its use in biomaterials. Acta Biomater 2015; 11: 17–26.
Carlisle EM . Silicon: a requirement in bone formation independent of vitamin D1. Calcif Tissue Int 1981; 33: 27–34.
Bose S, Tarafder S, Banerjee SS et al. Understanding in vivo response and mechanical property variation in MgO, SrO and SiO2 doped β-TCP. Bone 2011; 48: 1282–1290.
Midha S, van den Bergh W, Kim TB et al. Bioactive glass foam scaffolds are remodelled by osteoclasts and support the formation of mineralized matrix and vascular networks in vitro . Adv Healthcare Mater 2013; 2: 490–499.
Wu C, Zhai D, Ma H et al. Stimulation of osteogenic and angiogenic ability of cells on polymers by pulsed laser deposition of uniform akermanite-glass nanolayer. Acta Biomater 2014; 10: 3295–3306.
Su CC, Kao CT, Hung CJ et al. Regulation of physicochemical properties, osteogenesis activity, and fibroblast growth factor-2 release ability of β-tricalcium phosphate for bone cement by calcium silicate. Mater Sci Eng C Mater Biol Appl 2014; 37: 156–163.
O'Brien FJ . Biomaterials & scaffolds for tissue engineering. Mater Today 2011; 14: 88–95.
Lertcumfu N, Jaita P, Manotham S et al. Properties of calcium phosphates ceramic composites derived from natural materials. Ceram Int 2016; 42: 10638–10644.
Padmanabhan SK, Gervaso F, Carrozzo M et al. Wollastonite/hydroxyapatite scaffolds with improved mechanical, bioactive and biodegradable properties for bone tissue engineering. Ceram Int 2013; 39: 619–627.
Mohammadi H, Sepantafar M, Ostadrahimi A . The role of bioinorganics in improving the mechanical properties of silicate ceramics as bone regenerative materials. J Ceram Sci Technol 2015; 6: 1–8.
Wu C, Chang J . A review of bioactive silicate ceramics. Biomed Mater 2013; 8: 032001.
Wu H, Liu G, Wu Q et al. Repairing rabbit radial defects by combining bone marrow stroma stem cells with bone scaffold material comprising a core-cladding structure. Genet Mol Res 2015; 14: 11933–11943.
Wu C, Ramaswamy Y, Zreiqat H . Porous diopside (CaMgSi2O6) scaffold: a promising bioactive material for bone tissue engineering. Acta Biomater 2010; 6: 2237–2245.
Rezaei Y, Moztarzadeh F, Shahabi S et al. Synthesis, characterization, and in vitro bioactivity of sol-gel-derived SiO2-CaO-P2O5-MgO-SrO bioactive glass. Synth React Inorg Met-Org Nano-Met Chem 2014; 44: 692–701.
Vallittu PK, Närhi TO, Hupa L . Fiber glass-bioactive glass composite for bone replacing and bone anchoring implants. Dent Mater 2015; 31: 371–381.
Filipowska J, Pawlik J, Cholewa-Kowalska K et al. Incorporation of sol-gel bioactive glass into PLGA improves mechanical properties and bioactivity of composite scaffolds and results in their osteoinductive properties. Biomed Mater 2014; 9: 065001.
Hench LL . Bioceramics: from concept to clinic. J Am Ceram Soc 1991; 74: 1487–1510.
Jebahi S, Oudadesse H, Jardak N et al. Biological therapy of strontium-substituted bioglass for soft tissue wound-healing: responses to oxidative stress in ovariectomised rats. Ann Pharm Fr 2013; 71: 234–242.
Sepulveda P, Jones JR, Hench LL . Bioactive sol-gel foams for tissue repair. J Biomed Mater Res 2002; 59: 340–348.
He D, Liu P, Liu X et al. Hydroxyapatite bioceramic coatings prepared by hydrothermal-electrochemical deposition method. J Wuhan Univ Technol Mater Sci Ed 2014; 29: 398–400.
Levandowski N, Camargo NH, Silva DF et al. Characterization of different nanostructured bone substitute biomaterials. Adv Mater Res 2014; 936: 695–700.
Ching HA, Choudhury D, Nine MJ et al. Effects of surface coating on reducing friction and wear of orthopaedic implants. Sci Technol Adv Mat 2014; 15: 014402.
Li Z, Munroe P, Jiang Z et al. Designing superhard, self-toughening CrAlN coatings through grain boundary engineering. Acta Mater 2012; 60: 5735–5744.
Li BF . Design of sports field based on nanometer materials. Appl Mech Mater 2013, 366–369.
Chen X, Wang Z, Ding D et al. Strengthening and toughening strategies for tin bronze alloy through fabricating in-situ nanostructured grains. Mater Des (1980-2015) 2015; 66: 60–66.
Huang F, Wang Z, Lu X et al. Peculiar magnetism of BiFeO3 nanoparticles with size approaching the period of the spiral spin structure. Sci Rep 2013; 3: 2907.
Sohail MF, Javed I, Hussain SZ et al. Folate grafted thiolated chitosan enveloped nanoliposomes with enhanced oral bioavailability and anticancer activity of docetaxel. J Mater Chem B 2016; 4: 6240–6248.
Wang D, De Cicco MP, Li X . Using diluted master nanocomposites to achieve grain refinement and mechanical property enhancement in as-cast Al-9Mg. Mater Sci Eng A 2012; 532: 396–400.
Tsao L, Wu M, Chang S . Effect of TiO2 nanoparticles on the microstructure and bonding strengths of Sn0.7Cu composite solder BGA packages with immersion Sn surface finish. J Mater Sci Mater Electron 2012; 23: 681–687.
Shuai C, Feng P, Wu P et al. A combined nanostructure constructed by graphene and boron nitride nanotubes reinforces ceramic scaffolds. Chem Eng J 2017; 313: 487–497.
Gao C, Feng P, Peng S et al. Carbon nanotubes, graphene and boron nitride nanotubes reinforced bioactive ceramics for bone repair. Acta Biomater 2017; 61: 1–20.
Vila M, Cicuéndez M, Sánchez-Marcos J et al. Electrical stimuli to increase cell proliferation on carbon nanotubes/mesoporous silica composites for drug delivery. J Biomed Mater Res A 2013; 101: 213–221.
Tatarko P, Grasso S, Chlup Z et al. Toughening effect of multi-walled boron nitride nanotubes and their influence on the sintering behaviour of 3Y-TZP zirconia ceramics. J Eur Ceram Soc 2014; 34: 1829–1843.
Wu C, Xia L, Han P et al. Graphene-oxide-modified β-tricalcium phosphate bioceramics stimulate in vitro and in vivo osteogenesis. Carbon 2015; 93: 116–129.
Zeng X, Ye L, Yu S et al. Facile preparation of superelastic and ultralow dielectric boron nitride nanosheet aerogels via freeze-casting process. Chem Mater 2015; 27: 5849–5855.
Echeberria J, RodrÃguez N, Vleugels J et al. Hard and tough carbon nanotube-reinforced zirconia-toughened alumina composites prepared by spark plasma sintering. Carbon 2012; 50: 706–717.
Zhang J, Jia C, Jia Z et al. Strengthening mechanisms in carbon nanotube reinforced bioglass composites. Front Chem Sci Eng 2012; 6: 126–131.
Ahmad I, Islam M, Abdo HS et al. Toughening mechanisms and mechanical properties of graphene nanosheet-reinforced alumina. Mater Des 2015; 88: 1234–1243.
Lahiri D, Singh V, Benaduce AP et al. Boron nitride nanotube reinforced hydroxyapatite composite: mechanical and tribological performance and in-vitro biocompatibility to osteoblasts. J Mech Behav Biomed 2011; 4: 44–56.
Lock J, Nguyen TY, Liu H . Nanophase hydroxyapatite and poly (lactide-co-glycolide) composites promote human mesenchymal stem cell adhesion and osteogenic differentiation in vitro . J Mater Sci Mater Med 2012; 23: 2543–2552.
Huang ZW, Ding TT, Sun J . Study of effect on cell proliferation and hemolysis of HAP and TCP nanometer particles. Adv Mater Res 2012; 378: 711–714.
Zhou Q, Shi L, Chattoraj S et al. Preparation and characterization of surface-engineered coarse microcrystalline cellulose through dry coating with silica nanoparticles. J Pharm Sci 2012; 101: 4258–4266.
Milovac D, Gallego Ferrer G, Ivankovic M et al. PCL-coated hydroxyapatite scaffold derived from cuttlefish bone: morphology, mechanical properties and bioactivity. Mater Sci Eng C Mater Biol Appl 2014; 34: 437–445.
Roohani-Esfahani S, Nouri-Khorasani S, Lu Z et al. Effects of bioactive glass nanoparticles on the mechanical and biological behavior of composite coated scaffolds. Acta Biomater 2011; 7: 1307–1318.
Yang K, Feng J, Zhou X et al. In-situ formed γ-Al 2 O 3 nanocrystals repaired and toughened Al 2 O 3 coating prepared by plasma spraying. Surf Coat Technol 2012; 206: 3082–3087.
Zhou F, Ren H, Li G et al. On-line separation and preconcentration of trace cadmium in environmental water samples by micro column filled with modified nanometer Si-HAP prior to FAAS determination. Int J Environ Anal Chem 2012; 92: 821–831.
Kasirajan S, Ngouajio M . Polyethylene and biodegradable mulches for agricultural applications: a review. Agron Sustainable Dev 2012; 32: 501–529.
Zhao Q, Qi HJ, Xie T . Recent progress in shape memory polymer: New behavior, enabling materials, and mechanistic understanding. Prog Polym Sci 2015; 49-50: 79–120.
Hammouche S, Hammouche D, Mcnicholas M . Biodegradable bone regeneration synthetic scaffolds: in tissue engineering. Curr Stem Cell Res Ther 2012; 7: 134–142.
Bezerra CS, de Farias Lemos CMG, de Sousa M et al. Enzyme immobilization onto renewable polymeric matrixes: past, present, and future trends. J Appl Polym Sci 2015; 132: 42125.
Ates O . Systems biology of microbial exopolysaccharides production. Front Bioeng Biotechnol 2016; 3: 200.
Sonia TA, Sharma CP . An overview of natural polymers for oral insulin delivery. Drug Discov Today 2012; 17: 784–792.
Cheneler D, Bowen J . Degradation of polymer films. Soft Matter 2013; 9: 344–358.
Mu HM, Wang LY . Effect of therapeutic ultrasound on brain angiogenesis following intracerebral hemorrhage in rats. Microvasc Res 2015; 102: 11–18.
O’Loughlin A, Kulkarni M, Creane M et al. Topical administration of allogeneic mesenchymal stromal cells seeded in a collagen scaffold augments wound healing and increases angiogenesis in the diabetic rabbit ulcer. Diabetes 2013; 62: 2588–2594.
Su Y, Su Q, Liu W et al. Controlled release of bone morphogenetic protein 2 and dexamethasone loaded in core-shell PLLACL-collagen fibers for use in bone tissue engineering. Acta Biomater 2012; 8: 763–771.
Aljawish A, Chevalot I, Jasniewski J et al. Enzymatic synthesis of chitosan derivatives and their potential applications. J Mol Catal B Enzym 2015; 112: 25–39.
Kyzas GZ, Siafaka PI, Pavlidou EG et al. Synthesis and adsorption application of succinyl-grafted chitosan for the simultaneous removal of zinc and cationic dye from binary hazardous mixtures. Chem Eng J 2015; 259: 438–448.
Rajitha P, Gopinath D, Biswas R et al. Chitosan nanoparticles in drug therapy of infectious and inflammatory diseases. Expert Opin Drug Delivery 2016; 13: 1177–1194.
Seol YJ, Lee JY, Park YJ et al. Chitosan sponges as tissue engineering scaffolds for bone formation. Biotechnol Lett 2004; 26: 1037–1041.
Klokkevold PR, Vandemark L, Kenney EB et al. Osteogenesis enhanced by chitosan (poly-N-acetyl glucosaminoglycan) in vitro . J Periodontol 1996; 67: 1170–1175.
Foldberg S, Petersen M, Fojan P et al. Patterned poly (lactic acid) films support growth and spontaneous multilineage gene expression of adipose-derived stem cells. Colloids Surf B Biointerfaces 2012; 93: 92–99.
Wright B, Parmar N, Bozec L et al. A simple and robust method for pre-wetting poly (lactic-co-glycolic) acid microspheres. J Biomater Appl 2015; 30: 147–159.
Flores-Fernández GM, Griebenow K . Glycosylation improves α-chymotrypsin stability upon encapsulation in poly (lactic-co-glycolic) acid microspheres. Results Pharma Sci 2012; 2: 46–51.
Goonoo N, Bhaw-Luximon A, Jhurry D . Biodegradable polymer blends: miscibility, physicochemical properties and biological response of scaffolds. Polym Int 2015; 64: 1289–1302.
Asti A, Gioglio L . Natural and synthetic biodegradable polymers: different scaffolds for cell expansion and tissue formation. Int J Artif Organs 2014; 37: 187–205.
Parisi OI, Curcio M, Puoci F . Polymer chemistry and synthetic polymers. Puoci F (ed). Advanced Polymers in Medicine. Cham: Springer International Publishing 2015: 1–31.
Tian H, Tang Z, Zhuang X et al. Biodegradable synthetic polymers: preparation, functionalization and biomedical application. Prog Polym Sci 2012; 37: 237–280.
Orchel A, Jelonek K, Kasperczyk J et al. The influence of chain microstructure of biodegradable copolyesters obtained with low-toxic zirconium initiator to in vitro biocompatibility. Biomed Res Int 2013; 2013: 176946.
de Gracia Lux C, Joshi-Barr S, Nguyen T et al. Biocompatible polymeric nanoparticles degrade and release cargo in response to biologically relevant levels of hydrogen peroxide. J Am Chem Soc 2012; 134: 15758–15764.
Asghari F, Samiei M, Adibkia K et al. Biodegradable and biocompatible polymers for tissue engineering application: a review. Artif Cell Nanomed B 2017; 45: 185–192.
Santos A, Aw MS, Bariana M et al. Drug-releasing implants: current progress, challenges and perspectives. J Mater Chem B 2014; 2: 6157–6182.
Huang QW, Wang LP, Wang JY . Mechanical properties of artificial materials for bone repair. J Shanghai Jiaotong Univ (Sci) 2014; 19: 675–680.
Vert M . After soft tissues, bone, drug delivery and packaging, PLA aims at blood. Eur Polym J 2015; 68: 516–525.
Zhou C, Shi Q, Guo W et al. Electrospun bio-nanocomposite scaffolds for bone tissue engineering by cellulose nanocrystals reinforcing maleic anhydride grafted PLA. ACS Appl Mater Interfaces 2013; 5: 3847–3854.
Ma L, Jiang W, Li W . Solvent-free fabrication of tissue engineering scaffolds with immiscible polymer blends. Int J Polym Mater Polym Biomater 2014; 63: 510–517.
Singla R, Mehta R . Preparation and characterization of polylactic acid-based biodegradable blends processed under microwave radiation. Polym Plast Technol Eng 2012; 51: 1014–1017.
Suryanegara L, Nakagaito AN, Yano H . The effect of crystallization of PLA on the thermal and mechanical properties of microfibrillated cellulose-reinforced PLA composites. Compos Sci Technol 2009; 69: 1187–1192.
Zhang X, Shi Z, Fu W et al. in vitro biocompatibility study of electrospun copolymer ethylene carbonate-ɛ-caprolactone and vascular endothelial growth factor blended nanofibrous scaffolds. Appl Surf Sci 2012; 258: 2301–2306.
Larrañaga A, Sarasua J-R . Poly (α-hydroxy acids)-based cell microcarriers. Appl Sci 2016; 6: 436.
Zhao XY, Xie J, Wang MZ et al. Synthesis and characterization of novel biodegradable tetra-amino-terminated PLGA telechelic copolymer. J Mater Sci 2013; 48: 659–664.
Uskoković V, Hoover C, Vukomanović M et al. Osteogenic and antimicrobial nanoparticulate calcium phosphate and poly-(D, L-lactide-co-glycolide) powders for the treatment of osteomyelitis. Mater Sci Eng C Mater Biol Appl 2013; 33: 3362–3373.
Marrache S, Kumar Pathak R, Darley KL et al. Nanocarriers for tracking and treating diseases. Curr Med Chem 2013; 20: 3500–3514.
Seitz JM, Durisin M, Goldman J et al. Recent advances in biodegradable metals for medical sutures: a critical review. Adv Healthcare Mater 2015; 4: 1915–1936.
Thanganathan U, Nogami M . Investigations on effects of the incorporation of various ionic liquids on PVA based hybrid membranes for proton exchange membrane fuel cells. Int J Hydrogen Energy 2015; 40: 1935–1944.
Ninago MD, López OV, Lencina MS et al. Enhancement of thermoplastic starch final properties by blending with poly (ɛ-caprolactone). Carbohydr Polym 2015; 134: 205–212.
Qi Z, Ye H, Xu J et al. Synthesis and characterizations of attapulgite reinforced branched poly (butylene succinate) nanocomposites. Colloids Surf A 2013; 436: 26–33.
Williams JM, Adewunmi A, Schek RM et al. Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. Biomaterials 2005; 26: 4817–4827.
Palamoor M, Jablonski MM . Poly (ortho ester) nanoparticle-based targeted intraocular therapy for controlled release of hydrophilic molecules. Mol Pharm 2013; 10: 701–708.
Gautam S, Dinda AK, Mishra NC . Fabrication and characterization of PCL/gelatin composite nanofibrous scaffold for tissue engineering applications by electrospinning method. Mater Sci Eng C Mater Biol Appl 2013; 33: 1228–1235.
Chopra P, Nayak BG, Handa VG . Development of PVA-carrageenan based scaffolds and evaluating its efficacy on osteosarcoma upon cryopreservation. Thapar University: Patiala, India, 2015.
Major R, Lackner J, Sanak M et al. Silver nanoparticles influence on the blood activation process and their release to blood plasma from synthetic polymer scaffold. IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2016: 012031.
Ignatius A, Claes LE . in vitro biocompatibility of bioresorbable polymers: poly (L, DL-lactide) and poly (L-lactide-co-glycolide). Biomaterials 1996; 17: 831–839.
Bonzani IC, Adhikari R, Houshyar S et al. Synthesis of two-component injectable polyurethanes for bone tissue engineering. Biomaterials 2007; 28: 423–433.
Wen W, Luo B, Qin X et al. Strengthening and toughening of poly (L-lactide) composites by surface modified MgO whiskers. Appl Surf Sci 2015; 332: 215–223.
Guo Z, Lee SE, Kim H et al. Fabrication, characterization and microwave properties of polyurethane nanocomposites reinforced with iron oxide and barium titanate nanoparticles. Acta Mater 2009; 57: 267–277.
Maitra U, Prasad KE, Ramamurty U et al. Mechanical properties of nanodiamond-reinforced polymer-matrix composites. Solid State Commun 2009; 149: 1693–1697.
Wang G, Zhao M . Influence of polycaprolactone grafted MWNTs on antistatic ability of PVC. Eng Plast Appl 2010; 38: 10–14.
Khan U, May P, O'Neill A et al. Polymer reinforcement using liquid-exfoliated boron nitride nanosheets. Nanoscale 2013; 5: 581–587.
Choi WY, Kim HE, Kim MJ et al. Production and characterization of calcium phosphate (CaP) whisker-reinforced poly (ε-caprolactone) composites as bone regenerative. Mater Sci Eng C 2010; 30: 1280–1284.
Meseguer-Olmo L, Vicente-Ortega V, Alcaraz-Baños M et al. In-vivo behavior of Si-hydroxyapatite/polycaprolactone/DMB scaffolds fabricated by 3D printing. J Biomed Mater Res A 2013; 101: 2038–2048.
Kim SS, Park MS, Gwak SJ et al. Accelerated bonelike apatite growth on porous polymer/ceramic composite scaffolds in vitro . Tissue Eng 2006; 12: 2997–3006.
Duan B, Wang M, Zhou WY et al. Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering. Acta Biomater 2010; 6: 4495–4505.
Nie H, Wang C-H . Fabrication and characterization of PLGA/HAp composite scaffolds for delivery of BMP-2 plasmid DNA. J Control Release 2007; 120: 111–121.
Cui W, Li X, Chen J et al. In situ growth kinetics of hydroxyapatite on electrospun poly (DL-lactide) fibers with gelatin grafted. Cryst Growth Des 2008; 8: 4576–4582.
Murphy C, Kolan K, Li W . 3D bioprinting of stem cells and polymer/bioactive glass composite scaffolds for bone tissue engineering. Int J Bioprint 2017; 3: 1–11.
Poh PS, Hutmacher DW, Stevens MM et al. Fabrication and in vitro characterization of bioactive glass composite scaffolds for bone regeneration. Biofabrication 2013; 5: 045005.
Wu F, Wei J, Liu C et al. Fabrication and properties of porous scaffold of zein/PCL biocomposite for bone tissue engineering. Composites Part B 2012; 43: 2192–2197.
Bhardwaj N, Kundu SC . Silk fibroin protein and chitosan polyelectrolyte complex porous scaffolds for tissue engineering applications. Carbohydr Polym 2011; 85: 325–333.
Wen W, Zou Z, Luo B et al. in vitro degradation and cytocompatibility of g-MgO whiskers/PLLA composites. J Mater Sci 2017; 52: 2329–2344.
Westhauser F, Weis C, Prokscha M et al. Three-dimensional polymer coated 45S5-type bioactive glass scaffolds seeded with human mesenchymal stem cells show bone formation in vivo . J Mater Sci Mater Med 2016; 27: 119.
Saravanan S, Nethala S, Pattnaik S et al. Preparation, characterization and antimicrobial activity of a bio-composite scaffold containing chitosan/nano-hydroxyapatite/nano-silver for bone tissue engineering. Int J Biol Macromol 2011; 49: 188–193.
Hou JY, Zhang SQ, Ke L . The application of metal materials in exercise-induced bone injury. Adv Mater Res 2013; 675: 205–208.
Bakhsheshi-Rad HR, Hamzah E, Ismail AF et al. Synthesis and corrosion behavior of a hybrid bioceramic-biopolymer coating on biodegradable Mg alloy for orthopaedic implants. J Alloys Compd 2015; 648: 1067–1071.
Draxler J, Martinelli E, Weinberg AM et al. The potential of isotopically enriched Magnesium to study bone implant degradation in vivo . Acta Biomater 2017; 51: 526–536.
Shuai C, Yang Y, Wu P et al. Laser rapid solidification improves corrosion behavior of Mg-Zn-Zr alloy. J Alloys Compd 2016; 691: 961–969.
Yang Y, Wu P, Lin X et al. System development, formability quality and microstructure evolution of selective laser-melted magnesium. Virtual Phys Prototyping 2016; 11: 173–181.
Maurya R, Siddiqui AR, Balani K . in vitro degradation and biomineralization ability of hydroxyapatite coated Mg-9Li-7Al-1Sn and Mg-9Li-5Al-3Sn-1Zn alloys. Surf Coat Technol 2017; 325: 65–74.
Haghshenas M . Mechanical characteristics of biodegradable Qmagnesium matrix composites: a review. J Magnes Alloys 2017; 5: 189–201.
Nile SH, Park SW . Edible berries: bioactive components and their effect on human health. Nutrition 2014; 30: 134–144.
Seitz JM, Eifler R, Bach FW et al. Magnesium degradation products: effects on tissue and human metabolism. J Biomed Mater Res A 2014; 102: 3744–3753.
Atrens A . Revolutionising biodegradable biomaterials—significance of magnesium and its alloys. Narayanan TSNS, Park I-S, Lee M-H (eds). Surface Modification of Magnesium and its Alloys for Biomedical Applications: Biological Interactions, Mechanical Properties and Testing vol. 1. San Cambridge: Woodhead Publishing. 2015: 3–28.
Jin W, Wang G, Lin Z et al. Corrosion resistance and cytocompatibility of tantalum-surface-functionalized biomedical ZK60 Mg alloy. Corros Sci 2017; 114: 45–56.
Orlov D, Ralston KD, Birbilis N et al. Enhanced corrosion resistance of Mg alloy ZK60 after processing by integrated extrusion and equal channel angular pressing. Acta Mater 2011; 59: 6176–6186.
Yang Y, Wu P, Wang Q et al. The enhancement of Mg corrosion resistance by alloying Mn and laser-melting. Materials 2016; 9: 216.
Gu XN, Li N, Zheng YF et al. in vitro study on equal channel angular pressing AZ31 magnesium alloy with and without back pressure. Mater Sci Eng B 2011; 176: 1802–1806.
Cifuentes SC, Benavente R, Lieblich M et al. Biodegradable and bioabsorbable materials for osteosynthesis applications: state-of-the-art and future perspectives. Thakur VK, Thakur MK, Kessler MR (eds). Handbook of Composites from Renewable Materials, Biodegradable Materials vol. 5. John Wiley & Sons: Hoboken, USA 2017, pp 109–144.
Sridhar TM, Vinodhini SP, Mudali UK et al. Load-bearing metallic implants: electrochemical characterisation of corrosion phenomena. Mater Technol 2016; 31: 705–718.
Zeng RC, Jin Z, Huang WJ et al. Review of studies on corrosion of magnesium alloys. Trans Nonferrous Met Soc China 2006; 16: 763–771.
Valente T . Grain boundary effects on the behavior of WE43 magnesium castings in simulated marine environment. J Mater Sci Lett 2001; 20: 67–69.
Lin DJ, Hung FY, Lui TS et al. Heat treatment mechanism and biodegradable characteristics of ZAX1330 Mg alloy. Mater Sci Eng C Mater Biol Appl 2015; 51: 300–308.
Chen K, Dai J, Zhang X . Improvement of corrosion resistance of magnesium alloys for biomedical applications. Corros Rev 2015; 33: 101–117.
Takei R, Umeda J, Kondoh K . Evaluation of galvanic corrosion phenomenon between α-Mg matrix and metallic dispersoids in Mg alloys using surface potential difference. Trans Jpn Soc Mech Eng 2011; 77: 301–315.
Coy AE, Viejo F, Skeldon P et al. Susceptibility of rare-earth-magnesium alloys to micro-galvanic corrosion. Corros Sci 2010; 52: 3896–3906.
Li J, Jiang Q, Sun H et al. Effect of heat treatment on corrosion behavior of AZ63 magnesium alloy in 3.5 wt.% sodium chloride solution. Corros Sci 2016; 111: 288–301.
Jafari S, Raman Singh RK . In-vitro biodegradation and corrosion-assisted cracking of a coated magnesium alloy in modified-simulated body fluid. Mater Sci Eng C Mater Biol Appl 2017; 78: 278–287.
Cao F, Song GL, Atrens A . Corrosion and passivation of magnesium alloys. Corros Sci 2016; 111: 835–845.
Amin MA, Abd El Rehim SS, El-Lithy AS . Pitting and pitting control of Al in gluconic acid solutions-polarization, chronoamperometry and morphological studies. Corros Sci 2010; 52: 3099–3108.
Huttunen-Saarivirta E, Kuokkala VT, Kokkonen J et al. Corrosion effects of runway de-icing chemicals on aircraft alloys and coatings. Mater Chem Phys 2011; 126: 138–151.
Li J, Cao P, Zhang X et al. in vitro degradation and cell attachment of a PLGA coated biodegradable Mg-6Zn based alloy. J Mater Sci 2010; 45: 6038–6045.
Hofstetter J, Martinelli E, Pogatscher S et al. Influence of trace impurities on the in vitro and in vivo degradation of biodegradable Mg-5Zn-0.3Ca alloys. Acta Biomater 2015; 23: 347–353.
Gusieva K, Davies C, Scully J et al. Corrosion of magnesium alloys: the role of alloying. Int Mater Rev 2015; 60: 169–194.
Zhang HJ, Zhang DF, Ma CH et al. Improving mechanical properties and corrosion resistance of Mg-6Zn-Mn magnesium alloy by rapid solidification. Mater Lett 2013; 92: 45–48.
Prasad A, Uggowitzer PJ, Shi Z et al. Production of high purity magnesium alloys by melt purification with Zr. Adv Eng Mater 2012; 14: 477–490.
Song G . Control of biodegradation of biocompatable magnesium alloys. Corros Sci 2007; 49: 1696–1701.
Qiao Z, Shi Z, Hort N et al. Corrosion behaviour of a nominally high purity Mg ingot produced by permanent mould direct chill casting. Corros Sci 2012; 61: 185–207.
Cao F, Shi Z, Hofstetter J et al. Corrosion of ultra-high-purity Mg in 3.5% NaCl solution saturated with Mg(OH)2. Corros Sci 2013; 75: 78–99.
Peng Q, Huang Y, Le Z et al. Preparation and properties of high purity Mg-Y biomaterials. Biomaterials 2010; 31: 398–403.
Schlüter K, Shi Z, Zamponi C et al. Corrosion performance and mechanical properties of sputter-deposited MgY and MgGd alloys. Corros Sci 2014; 78: 43–54.
Friedrich HE, Mordike BL. Magnesium Technology—Metallurgy, Design Data, Application. Berlin Heidelberg: Springer-Verlag, 2006.
Chen J, Song Y, Shan D et al. Influence of alloying elements and microstructure on the formation of hydrotalcite film on Mg alloys. Corros Sci 2015; 93: 90–99.
Willbold E, Gu X, Albert D et al. Effect of the addition of low rare earth elements (lanthanum, neodymium, cerium) on the biodegradation and biocompatibility of magnesium. Acta Biomater 2015; 11: 554–562.
Velikokhatnyi OI, Kumta PN . First-principles studies on alloying and simplified thermodynamic aqueous chemical stability of calcium-, zinc-, aluminum-, yttrium- and iron-doped magnesium alloys. Acta Biomater 2009; 6: 1698–1704.
Rosalbino F, Angelini E, Negri SD et al. Effect of erbium addition on the corrosion behaviour of Mg-Al alloys. Intermetallics 2005; 13: 55–60.
Bakhsheshi-Rad HR, Idris MH, Abdul-Kadir MR et al. Mechanical and bio-corrosion properties of quaternary Mg-Ca-Mn-Zn alloys compared with binary Mg-Ca alloys. Mater Des 2014; 53: 283–292.
Ben-Hamu G, Eliezer D, Shin KS et al. The relation between microstructure and corrosion behavior of Mg-Y-RE-Zr alloys. J Alloys Compd 2007; 431: 269–276.
Jia R, Zhang M, Zhang L et al. Correlative change of corrosion behavior with the microstructure of AZ91 Mg alloy modified with Y additions. J Alloys Compd 2015; 634: 263–271.
Choi JY, Kim WJ . Significant effects of adding trace amounts of Ti on the microstructure and corrosion properties of Mg-6Al-1Zn magnesium alloy. J Alloys Compd 2014; 614: 49–55.
Zhou X, Huang Y, Wei Z et al. Improvement of corrosion resistance of AZ91D magnesium alloy by holmium addition. Corros Sci 2006; 48: 4223–4233.
Zhao MC, Liu M, Song G et al. Influence of the β-phase morphology on the corrosion of the Mg alloy AZ91. Corros Sci 2008; 50: 1939–1953.
Zhang XB, He XC, Xue YJ et al. Effects of Sr on microstructure and corrosion resistance in simulated body fluid of as cast Mg-Nd-Zr magnesium alloys. Corros Eng Sci Technol 2014; 49: 345–351.
Li X, Liu X, Wu S et al. Design of magnesium alloys with controllable degradation for biomedical implants: from bulk to surface. Acta Biomater 2016; 45: 2–30.
Hagihara K, Okubo M, Yamasaki M et al. Crystal-orientation-dependent corrosion behaviour of single crystals of a pure Mg and Mg-Al and Mg-Cu solid solutions. Corros Sci 2016; 109: 68–85.
Samaniego A, Gusieva K, Llorente I et al. Exploring the possibility of protective surface oxides upon Mg alloy AZ31 via lutetium additions. Corros Sci 2014; 89: 101–110.
Birbilis N, Williams G, Gusieva K et al. Poisoning the corrosion of magnesium. Electrochem Commun 2013; 34: 295–298.
Hornberger H, Virtanen S, Boccaccini AR . Biomedical coatings on magnesium alloys-a review. Acta Biomater 2012; 8: 2442–2455.
Wagener V, Killian MS, Turhan CM et al. Albumin coating on magnesium via linker molecules-comparing different coating mechanisms. Colloids Surf B Biointerfaces 2013; 103: 586–594.
Wong HM, Yeung KW, Lam KO et al. A biodegradable polymer-based coating to control the performance of magnesium alloy orthopaedic implants. Biomaterials 2010; 31: 2084–2096.
Shen S, Cai S, Xu G et al. Influence of heat treatment on bond strength and corrosion resistance of sol-gel derived bioglass-ceramic coatings on magnesium alloy. J Mech Behav Biomed 2015; 45: 166–174.
Zeng RC, Zhang F, Lan ZD et al. Corrosion resistance of calcium-modified zinc phosphate conversion coatings on magnesium-aluminium alloys. Corros Sci 2014; 88: 452–459.
Zhao Q, Guo X, Dang X et al. Preparation and properties of composite MAO/ECD coatings on magnesium alloy. Colloids Surf B Biointerfaces 2013; 102: 321–326.
Yazdimamaghani M, Razavi M, Vashaee D et al. Surface modification of biodegradable porous Mg bone scaffold using polycaprolactone/bioactive glass composite. Mater Sci Eng C Mater Biol Appl 2015; 49: 436–444.
Hahn, Byung-Dong, Park et al. Aerosol deposition of hydroxyapatite-chitosan composite coatings on biodegradable magnesium alloy. Surf Coat Technol 2011; 205: 3112–3118.
Razavi M, Fathi M, Savabi O et al. Controlling the degradation rate of bioactive magnesium implants by electrophoretic deposition of akermanite coating. Ceram Int 2014; 40: 3865–3872.
Razavi M, Fathi M, Savabi O et al. Coating of biodegradable magnesium alloy bone implants using nanostructured diopside (CaMgSi2O6). Appl Surf Sci 2014; 288: 130–137.
Hiromoto S . Self-healing property of hydroxyapatite and octacalcium phosphate coatings on pure magnesium and magnesium alloy. Corros Sci 2015; 100: 284–294.
Gao JH, Guan SK, Chen J et al. Fabrication and characterization of rod-like nano-hydroxyapatite on MAO coating supported on Mg-Zn-Ca alloy. Appl Surf Sci 2011; 257: 2231–2237.
Willbold E, Kalla K, Bartsch I et al. Biocompatibility of rapidly solidified magnesium alloy RS66 as a temporary biodegradable metal. Acta Biomater 2013; 9: 8509–8517.
Guan YC, Zhou W, Li ZL et al. Study on the solidification microstructure in AZ91D Mg alloy after laser surface melting. Appl Surf Sci 2009; 255: 8235–8238.
Zhao C, Pan F, Zhao S et al. Microstructure, corrosion behavior and cytotoxicity of biodegradable Mg-Sn implant alloys prepared by sub-rapid solidification. Mater Sci Eng C Mater Biol Appl 2015; 54: 245–251.
Hehmann F, Sommer F, Predel B . Extension of solid solubility in magnesium by rapid solidification. Mater Sci Eng A 1990; 125: 249–265.
Aghion E, Jan L, Meshi L et al. Increased corrosion resistance of the AZ80 magnesium alloy by rapid solidification. J Biomed Mater Res B Appl Biomater 2015; 103: 1541–1548.
Hakimi O, Aghion E, Goldman J . Improved stress corrosion cracking resistance of a novel biodegradable EW62 magnesium alloy by rapid solidification, in simulated electrolytes. Mater Sci Eng C Mater Biol Appl 2015; 51: 226–232.
Nooeaid P, Salih V, Beier JP et al. Osteochondral tissue engineering: scaffolds, stem cells and applications. J Cell Mol Med 2012; 16: 2247–2270.
Wu Y, Gao G, Wu G . Self-assembled three-dimensional hierarchical porous V2O5/graphene hybrid aerogels for supercapacitors with high energy density and long cycle life. J Mater Chem A 2015; 3: 1828–1832.
Liu C, Miller H, Sharma S et al. Analyzing actin dynamics during the activation of the B cell receptor in live B cells. Biochem Biophys Res Commun 2012; 427: 202–206.
Wolfenson H, Lavelin I, Geiger B . Dynamic Regulation of the Structure and Functions of Integrin Adhesions. Dev Cell 2013; 24: 447–458.
Gao C, Deng Y, Feng P et al. Current progress in bioactive ceramic scaffolds for bone repair and regeneration. Int J Mol Sci 2014; 15: 4714–4732.
Naleway SE, Porter MM, McKittrick J et al. Structural design elements in biological materials: application to bioinspiration. Adv Mater 2015; 27: 5455–5476.
Wang X, Xu S, Zhou S et al. Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: a review. Biomaterials 2016; 83: 127–141.
Qi YM, Yang LJ, Wang LL . Finite-element analysis and optimization for gradient porous structure of artificial bone. Appl Mech Mater 2012; 271-272: 922–926.
Qiu LL, Choong C . Three-dimensional scaffolds for tissue engineering applications: role of porosity and pore size. Tissue Eng Part B Rev 2013; 19: 485–502.
Derby B . Printing and prototyping of tissues and scaffolds. Science 2012; 338: 921–926.
Lee M, Wu BM . Recent advances in 3D printing of tissue engineering scaffolds. Comput Aided Tissue Eng 2012, 257–267.
Sultana N, Wang M . PHBV/PLLA-based composite scaffolds fabricated using an emulsion freezing/freeze-drying technique for bone tissue engineering: surface modification and in vitro biological evaluation. Biofabrication 2012; 4: 015003.
Yang J, Cai H, Lv J et al. in vivo study of a self-stabilizing artificial vertebral body fabricated by electron beam melting. Spine 2014; 39: 486–492.
Won JE, Mateos-Timoneda MA, Castano O et al. Fibronectin immobilization on to robotic-dispensed nanobioactive glass/polycaprolactone scaffolds for bone tissue engineering. Biotechnol Lett 2015; 37: 935–942.
Hunger PM, Donius AE, Wegst UG . Structure-property-processing correlations in freeze-cast composite scaffolds. Acta Biomater 2013; 9: 6338–6348.
Desimone D, Li W, Roether JA et al. Biosilicate®-gelatine bone scaffolds by the foam replica technique: development and characterization. Sci Technol Adv Mat 2013; 14: 045008.
Tayton E, Purcell M, Aarvold A et al. Supercritical CO2 fluid-foaming of polymers to increase porosity: A method to improve the mechanical and biocompatibility characteristics for use as a potential alternative to allografts in impaction bone grafting? Acta Biomater 2012; 8: 1918–1927.
Ji C, Annabi N, Khademhosseini A et al. Fabrication of porous chitosan scaffolds for soft tissue engineering using dense gas CO2. Acta Biomater 2011; 7: 1653–1664.
Tadic D, Beckmann F, Schwarz K et al. A novel method to produce hydroxyapatite objects with interconnecting porosity that avoids sintering. Biomaterials 2004; 25: 3335–3340.
Nazemi K, Moztarzadeh F, Jalali N et al. Synthesis and characterization of poly (lactic-co-glycolic) acid nanoparticles-loaded chitosan/bioactive glass scaffolds as a localized delivery system in the bone defects. Biomed Res Int 2014; 2014: 898930.
Tığlı RS, Karakeçili A, Gümüşderelioğlu M . in vitro characterization of chitosan scaffolds: influence of composition and deacetylation degree. J Mater Sci Mater Med 2007; 18: 1665–1674.
Guan J, Fujimoto KL, Sacks MS et al. Preparation and characterization of highly porous, biodegradable polyurethane scaffolds for soft tissue applications. Biomaterials 2005; 26: 3961–3971.
Nejati E, Mirzadeh H, Zandi M . Synthesis and characterization of nano-hydroxyapatite rods/poly (l-lactide acid) composite scaffolds for bone tissue engineering. Composites Part A 2008; 39: 1589–1596.
Lou T, Wang X, Song G et al. Fabrication of PLLA/β-TCP nanocomposite scaffolds with hierarchical porosity for bone tissue engineering. Int J Biol Macromol 2014; 69: 464–470.
Mikos AG, Sarakinos G, Leite SM et al. Laminated three-dimensional biodegradable foams for use in tissue engineering. Biomaterials 1993; 14: 323–330.
Meng Z, Wang Y, Ma C et al. Electrospinning of PLGA/gelatin randomly-oriented and aligned nanofibers as potential scaffold in tissue engineering. Mater Sci Eng C 2010; 30: 1204–1210.
Tripathi G, Basu B . A porous hydroxyapatite scaffold for bone tissue engineering: physico-mechanical and biological evaluations. Ceram Int 2012; 38: 341–349.
Kaufmann EE, Ducheyne P, Shapiro I . Evaluation of osteoblast response to porous bioactive glass (45S5) substrates by RT-PCR analysis. Tissue Eng 2000; 6: 19–28.
Ma J, Wang C, Peng KW . Electrophoretic deposition of porous hydroxyapatite scaffold. Biomaterials 2003; 24: 3505–3510.
Shin M, Yoshimoto H, Vacanti JP . in vivo bone tissue engineering using mesenchymal stem cells on a novel electrospun nanofibrous scaffold. Tissue Eng 2004; 10: 33–41.
Oh SH, Park IK, Kim JM et al. In vitro and in vivo characteristics of PCL scaffolds with pore size gradient fabricated by a centrifugation method. Biomaterials 2007; 28: 1664–1671.
Hoque ME, Chuan YL, Pashby I . Extrusion based rapid prototyping technique: an advanced platform for tissue engineering scaffold fabrication. Biopolymers 2012; 97: 83–93.
Campbell I, Bourell D, Gibson I . Additive manufacturing: rapid prototyping comes of age. Rapid Prototyping J 2012; 18: 255–258.
Liao Y, Song J, Li E et al. Rapid prototyping of three-dimensional microfluidic mixers in glass by femtosecond laser direct writing. Lab on A Chip 2012; 12: 746–749.
Billiet T, Vandenhaute M, Schelfhout J et al. A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering. Biomaterials 2012; 33: 6020–6041.
Eshraghi S, Das S . Micromechanical finite-element modeling and experimental characterization of the compressive mechanical properties of polycaprolactone-hydroxyapatite composite scaffolds prepared by selective laser sintering for bone tissue engineering. Acta Biomater 2012; 8: 3138–3143.
Liao H, Lee M, Tsai W et al. Osteogenesis of adipose-derived stem cells on polycaprolactone-β-tricalcium phosphate scaffold fabricated via selective laser sintering and surface coating with collagen type I. J Tissue Eng Regen Med 2016; 10: E337–E353.
Gauvin R, Chen YC, Lee JW et al. Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithography. Biomaterials 2012; 33: 3824–3834.
Elomaa L, Teixeira S, Hakala R et al. Preparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography. Acta Biomater 2011; 7: 3850–3856.
Korpela J, Kokkari A, Korhonen H et al. Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling. J Biomed Mater Res B Appl Biomater 2013; 101: 610–619.
Duan B, Wang M . Selective laser sintering and its biomedical applications. Schmidt V, Belegratis MR (eds). Laser Technology in Biomimetics: Basics and Applications. Berlin Heidelberg: Springer Berlin Heidelberg 2013: 83–109.
Kim K, Dean D, Wallace J et al. The influence of stereolithographic scaffold architecture and composition on osteogenic signal expression with rat bone marrow stromal cells. Biomaterials 2011; 32: 3750–3763.
Zein I, Hutmacher DW, Tan KC et al. Fused deposition modeling of novel scaffold architectures for tissue engineering applications. Biomaterials 2002; 23: 1169–1185.
Banerjee SS, Tarafder S, Davies NM et al. Understanding the influence of MgO and SrO binary doping on the mechanical and biological properties of beta-TCP ceramics. Acta Biomater 2010; 6: 4167–4174.
Salmoria GV, Klauss P, Zepon K et al. Development of functionally-graded reservoir of PCL/PG by selective laser sintering for drug delivery devices. Virtual Phys Prototyping 2012; 7: 107–115.
Kang MH, Jang TS, Kim SW et al. MgF2-coated porous magnesium/alumina scaffolds with improved strength, corrosion resistance, and biological performance for biomedical applications. Mater Sci Eng C Mater Biol Appl 2016; 62: 634–642.
Wei J, Jia J, Wu F et al. Hierarchically microporous/macroporous scaffold of magnesium-calcium phosphate for bone tissue regeneration. Biomaterials 2010; 31: 1260–1269.
Katarivas LG, Ventura Y, Goldman J et al. Cytotoxic characteristics of biodegradable EW10X04 Mg alloy after Nd coating and subsequent heat treatment. Mater Sci Eng C Mater Biol Appl 2016; 62: 752–761.
Tan L, Gong M, Zheng F et al. Study on compression behavior of porous magnesium used as bone tissue engineering scaffolds. Biomed Mater 2009; 4: 015016.
Liu YJ, Yang ZY, Tan LL et al. An animal experimental study of porous magnesium scaffold degradation and osteogenesis. Braz J Med Biol Res 2014; 47: 715–720.
Chen Z, Mao X, Tan L et al. Osteoimmunomodulatory properties of magnesium scaffolds coated with β-tricalcium phosphate. Biomaterials 2014; 35: 8553–8565.
Yu W, Zhao H, Ding Z et al. in vitro and in vivo evaluation of MgF2 coated AZ31 magnesium alloy porous scaffolds for bone regeneration. Colloids Surf B Biointerfaces 2017; 149: 330–340.
Nguyen TL, Staiger MP, Dias GJ et al. A novel manufacturing route for fabrication of topologically-ordered porous magnesium scaffolds. Adv Eng Mater 2011; 13: 872–881.
Suntornnond R, An J, Tijore A et al. A solvent-free surface suspension melt technique for making biodegradable PCL membrane scaffolds for tissue engineering applications. Molecules 2016; 21: 386.
Lee B, Lee T, Lee Y et al. Space-holder effect on designing pore structure and determining mechanical properties in porous titanium. Mater Des 2014; 57: 712–718.
Osorio-Hernández JO, Suarez MA, Goodall R et al. Manufacturing of open-cell Mg foams by replication process and mechanical properties. Mater Des 2014; 64: 136–141.
Tiyyagura HR, Rudolf R, Gorgieva S et al. The chitosan coating and processing effect on the physiological corrosion behaviour of porous magnesium monoliths. Prog Org Coat 2016; 99: 147–156.
Seyedraoufi ZS, Mirdamadi S . Effects of pulse electrodeposition parameters and alkali treatment on the properties of nano hydroxyapatite coating on porous Mg-Zn scaffold for bone tissue engineering application. Mater Chem Phys 2014; 148: 519–527.
Jiang G, Li Q, Wang C et al. Characterization and investigation of the deformation behavior of porous magnesium scaffolds with entangled architectured pore channels. J Mech Behav Biomed 2016; 64: 139–150.
Cheng MQ, Wahafu T, Jiang GF et al. A novel open-porous magnesium scaffold with controllable microstructures and properties for bone regeneration. Sci Rep 2016; 6: 24134.
Kirkland NT, Kolbeinsson I, Woodfield T et al. Synthesis and properties of topologically ordered porous magnesium. Mater Sci Eng B 2011; 176: 1666–1672.
Saad APM, Jasmawati N, Harun MN et al. Dynamic degradation of porous magnesium under a simulated environment of human cancellous bone. Corros Sci 2016; 112: 495–506.
Zhang X, Li XW, Li JG et al. Preparation and mechanical property of a novel 3D porous magnesium scaffold for bone tissue engineering. Mater Sci Eng C Mater Biol Appl 2014; 42: 362–367.
Marques AC, Almeida RM, Thiema A et al. Sol-gel-derived glass scaffold with high pore interconnectivity and enhanced bioactivity. J Mater Res 2009; 24: 3495–3502.
Cox SC . Synthesis and 3D printing of hydroxyapatite scaffolds for applications in bone tissue engineering. University of Warwick: Coventry, UK, 2013.
Liu FH, Shen YK, Lee JL . Selective laser sintering of a hydroxyapatite-silica scaffold on cultured MG63 osteoblasts in vitro . Int J Precis Eng Manuf 2012; 13: 439–444.
Zhu W, Wang M, Fu Y et al. Engineering a biomimetic three-dimensional nanostructured bone model for breast cancer bone metastasis study. Acta Biomater 2014; 14: 164–174.
Jelen C, Mattei G, Montemurro F et al. Bone scaffolds with homogeneous and discrete gradient mechanical properties. Mater Sci Eng C Mater Biol Appl 2013; 33: 28–36.
Du Y, Liu H, Shuang J et al. Microsphere-based selective laser sintering for building macroporous bone scaffolds with controlled microstructure and excellent biocompatibility. Colloids Surf B Biointerfaces 2015; 135: 81–89.
Nedjari S, Schlatter G, Hébraud A . Thick electrospun honeycomb scaffolds with controlled pore size. Mater Lett 2015; 142: 180–183.
Tian B, Liu J, Dvir T et al. Macroporous nanowire nanoelectronic scaffolds for synthetic tissues. Nat Mater 2012; 11: 986–994.
Ambre AH, Katti DR, Katti KS . Nanoclays mediate stem cell differentiation and mineralized ECM formation on biopolymer scaffolds. J Biomed Mater Res A 2013; 101: 2644–2660.
Yang F, Murugan R, Ramakrishna S et al. Fabrication of nano-structured porous PLLA scaffold intended for nerve tissue engineering. Biomaterials 2004; 25: 1891–1900.
Kim HH, Park YH, Yoon KJ et al. Fabrication of nanofibrous silkworm gland three-dimensional scaffold containing micro/nanoscale pores and study of its effects on adipose tissue-derived stem cell growth. J Mater Sci 2016; 51: 9267–9278.
Xia L, Lin K, Jiang X et al. Effect of nano-structured bioceramic surface on osteogenic differentiation of adipose derived stem cells. Biomaterials 2014; 35: 8514–8527.
Seunarine K, Meredith DO, Riehle MO et al. Biodegradable polymer tubes with lithographically controlled 3D micro- and nanotopography. Microelectron Eng 2008; 85: 1350–1354.
Pattison MA, Wurster S, Webster TJ et al. Three-dimensional, nano-structured PLGA scaffolds for bladder tissue replacement applications. Biomaterials 2005; 26: 2491–2500.
Kang MS, Kim JH, Singh RK et al. Therapeutic-designed electrospun bone scaffolds: mesoporous bioactive nanocarriers in hollow fiber composites to sequentially deliver dual growth factors. Acta Biomater 2015; 16: 103–116.
Ma MS, Kannan V, de Vries AE et al. Characterization and comparison of osteoblasts derived from mouse embryonic stem cells and induced pluripotent stem cells. J Bone Miner Metab 2017; 35: 21–30.
Kang Y, Georgiou AI, MacFarlane RJ et al. Fibronectin stimulates the osteogenic differentiation of murine embryonic stem cells. J Tissue Eng Regen Med 2015; 11: 1929–1940.
Rao V, Shih YRV, Kang H et al. Adenosine signaling mediates osteogenic differentiation of human embryonic stem cells on mineralized matrices. Front Bioeng Biotechnol 2015; 3: 185.
Ehnes D, Geransar R, Rancourt D et al. Exogenous nitric oxide enhances calcification in embryonic stem cell-derived osteogenic cultures. Differentiation 2015; 89: 97–103.
Zou L, Kidwai FK, Kopher RA et al. Use of RUNX2 expression to identify osteogenic progenitor cells derived from human embryonic stem cells. Stem Cell Rep 2015; 4: 190–198.
Yu Y, Al-Mansoori L, Opas M . Optimized osteogenic differentiation protocol from R1 mouse embryonic stem cells in vitro . Differentiation 2015; 89: 1–10.
Tang M, Chen W, Weir MD et al. Human embryonic stem cell encapsulation in alginate microbeads in macroporous calcium phosphate cement for bone tissue engineering. Acta Biomater 2012; 8: 3436–3445.
Rutledge K, Cheng Q, Pryzhkova M et al. Enhanced differentiation of human embryonic stem cells on extracellular matrix-containing osteomimetic scaffolds for bone tissue engineering. Tissue Eng Part C 2014; 20: 865–874.
Korkusuz P, Kose S, Zubeyde Kopru C . Biomaterial and stem cell interactions: histological biocompatibility. Curr Stem Cell Res Ther 2016; 11: 475–486.
Pittenger MF, Mackay AM, Beck SC et al. Multilineage potential of adult human mesenchymal stem cells. Science 1999; 284: 143–147.
Xiao Y, Mareddy S, Crawford R . Clonal characterization of bone marrow derived stem cells and their application for bone regeneration. Int J Oral Sci 2010; 2: 127–135.
Marmotti A, de Girolamo L, Bonasia DE et al. Bone marrow derived stem cells in joint and bone diseases: a concise review. Int Orthop 2014; 38: 1787–1801.
Berglund IS, Dirr EW, Ramaswamy V et al. The effect of Mg-Ca-Sr alloy degradation products on human mesenchymal stem cells. J Biomed Mater Res B Appl Biomater 2017, doi: 10.1002/jbm.b.33869 [Epub ahead of print].
Yu WL, Sun TW, Qi C et al. Enhanced osteogenesis and angiogenesis by mesoporous hydroxyapatite microspheres-derived simvastatin sustained release system for superior bone regeneration. Sci Rep 2017; 7: 44129.
Marei NH, El-Sherbiny IM, Lotfy A et al. Mesenchymal stem cells growth and proliferation enhancement using PLA vs PCL based nanofibrous scaffolds. Int J Biol Macromol 2016; 93: 9–19.
Watson N, Divers R, Kedar R et al. Discarded Wharton jelly of the human umbilical cord: a viable source for mesenchymal stromal cells. Cytotherapy 2015; 17: 18–24.
Penny J, Harris P, Shakesheff K et al. The biology of equine mesenchymal stem cells: phenotypic characterization, cell surface markers and multilineage differentiation. Front Biosci 2012; 17: 892–908.
Wang F, Zhang YC, Zhou H et al. Evaluation of in vitro and in vivo osteogenic differentiation of nano-hydroxyapatite/chitosan/poly (lactide-co-glycolide) scaffolds with human umbilical cord mesenchymal stem cells. J Biomed Mater Res A 2014; 102: 760–768.
Guan F, Ma S, Shi X et al. Biocompatibility of nano-hydroxyapatite/Mg-Zn-Ca alloy composite scaffolds to human umbilical cord mesenchymal stem cells from Wharton's jelly in vitro . Sci China Life Sci 2014; 57: 181–187.
Wang F, Su XX, Guo YC et al. Bone regeneration by nanohydroxyapatite/chitosan/poly (lactide-co-glycolide) scaffolds seeded with human umbilical cord mesenchymal stem cells in the calvarial defects of the nude mice. Biomed Res Int 2015; 2015: 261938.
Gronthos S, Mankani M, Brahim J et al. Postnatal human dental pulp stem cells (DPSCs) in vitro and in vivo . Proc Natl Acad Sci 2000; 97: 13625–13630.
Gronthos S, Brahim J, Li W et al. Stem cell properties of human dental pulp stem cells. J Dent Res 2002; 81: 531–535.
Ledesma-MartÃnez E, Mendoza-Núñez VM, Santiago-Osorio E, Mesenchymal Stem Cells . Derived from dental pulp: a review. Stem Cells Int 2015; 2016: 4709572.
Seong JM, Kim BC, Park JH et al. Stem cells in bone tissue engineering. Biomed Mater 2010; 5: 062001.
Khanna-Jain R, Mannerström B, Vuorinen A et al. Osteogenic differentiation of human dental pulp stem cells on β-tricalcium phosphate/poly (l-lactic acid/caprolactone) three-dimensional scaffolds. J Tissue Eng 2012; 3: 2041731412467998.
Widbiller M, Lindner SR, Buchalla W et al. Three-dimensional culture of dental pulp stem cells in direct contact to tricalcium silicate cements. Clin Oral Investig 2016; 20: 237–246.
Jensen J, Kraft DCE, Lysdahl H et al. Functionalization of polycaprolactone scaffolds with hyaluronic acid and β-TCP facilitates migration and osteogenic differentiation of human dental pulp stem cells in vitro . Tissue Eng Part A 2014; 21: 729–739.
Takahashi K, Yamanaka S . Induction of pluripotent stem cells from mouse embryonic and adult fibroblast cultures by defined factors. Cell 2006; 126: 663–676.
Lou X . Induced pluripotent stem cells as a new strategy for osteogenesis and bone regeneration. Stem Cell Rev Rep 2015; 11: 645–651.
Holzwarth JM, Ma PX . Biomimetic nanofibrous scaffolds for bone tissue engineering. Biomaterials 2011; 32: 9622–9629.
D’Angelo F, Armentano I, Cacciotti I et al. Tuning multi/pluri-potent stem cell fate by electrospun poly (L-lactic acid)-calcium-deficient hydroxyapatite nanocomposite mats. Biomacromolecules 2012; 13: 1350–1360.
Cho YD, Bae HS, Lee DS et al. Epigenetic priming confers direct cell trans-differentiation from adipocyte to osteoblast in a transgene-free state. J Cell Physiol 2016; 231: 1484–1494.
Tansriratanawong K, Tamaki Y, Ishikawa H et al. Co-culture with periodontal ligament stem cells enhances osteogenic gene expression in de-differentiated fat cells. Hum Cell 2014; 27: 151–161.
Cho YD, Yoon WJ, Kim WJ et al. Epigenetic modifications and canonical wingless/int-1 class (WNT) signaling enable trans-differentiation of nonosteogenic cells into osteoblasts. J Biol Chem 2014; 289: 20120–20128.
Sun Y, Chen CS, Fu J . Forcing stem cells to behave: a biophysical perspective of the cellular microenvironment. Annu Rev Biophys 2012; 41: 519–542.
Zhukova Y, Hiepen C, Knaus P et al. The role of titanium surface nanostructuring on preosteoblast morphology, adhesion, and migration. Adv Healthcare Mater 2017, 1601244.
Aiyelabegan HT, Sadroddiny E . Fundamentals of protein and cell interactions in biomaterials. Biomed Pharmacother 2017; 88: 956–970.
McMurray RJ, Dalby MJ, Tsimbouri PM . Using biomaterials to study stem cell mechanotransduction, growth and differentiation. J Tissue Eng Regen Med 2015; 9: 528–539.
Chiu LH, Lai WF, Chang SF et al. The effect of type II collagen on MSC osteogenic differentiation and bone defect repair. Biomaterials 2014; 35: 2680–2691.
Hozumi K, Fujimori C, Katagiri F et al. Suppression of cell adhesion through specific integrin crosstalk on mixed peptide-polysaccharide matrices. Biomaterials 2015; 37: 73–81.
Shie MY, Ding SJ . Integrin binding and MAPK signal pathways in primary cell responses to surface chemistry of calcium silicate cements. Biomaterials 2013; 34: 6589–6606.
Biggs MJ, Richards RG, Gadegaard N et al. The use of nanoscale topography to modulate the dynamics of adhesion formation in primary osteoblasts and ERK/MAPK signalling in STRO-1+ enriched skeletal stem cells. Biomaterials 2009; 30: 5094–5103.
Xu W, Liu B, Liu X et al. Regulation of BMP2-induced intracellular calcium increases in osteoblasts. J Orth Res 2016; 34: 1725–1733.
Gallinetti S, Mestres G, Canal C et al. A novel strategy to enhance interfacial adhesion in fiber-reinforced calcium phosphate cement. J Mech Behav Biomed 2017; 75: 495–503.
Bubik S, Payer M, Arnetzl G et al. Attachment and growth of human osteoblasts on different biomaterial surfaces. Int J Comput Dent 2017; 20: 229–243.
Perikamana S, Shin YM, Lee JK et al. Graded functionalization of biomaterial surfaces using mussel-inspired adhesive coating of polydopamine. Colloids Surf B Biointerfaces 2017; 159: 546–556.
Zhou Q, Castañeda OO, Guimarães C et al. Screening platform for cell contact guidance based on inorganic biomaterial micro/nanotopographical gradients. ACS Appl Mater Interfaces 2017; 9: 31433–31445.
Coelho NM, Llopis-Hernández V, Salmerón-Sánchez M et al. Chapter four—dynamic reorganization and enzymatic remodeling of type IV collagen at cell-biomaterial interface. Adv Protein Chem Struct Biol 2016; 105: 81–104.
Ledda M, De BA, Bertani FR et al. Interdisciplinary approach to cell-biomaterial interactions: biocompatibility and cell friendly characteristics of RKKP glass-ceramic coatings on titanium. Biomed Mater 2015; 10: 035005.
Kakinoki S, Yamaoka T . Single-step immobilization of cell adhesive peptides on a variety of biomaterial substrates via tyrosine oxidation with copper catalyst and hydrogen peroxide. Bioconj Chem 2015; 26: 639–644.
Kim SE, Jia W, Jordan AM et al. Surface modification of melt extruded poly(ε-caprolactone) nanofibers: toward a new scalable biomaterial scaffold. ACS Macro Letters 2014; 3: 585–589.
Gemini-Piperni S, Milani R, Bertazzo S et al. Kinome profiling of osteoblasts on hydroxyapatite opens new avenues on biomaterial cell signaling. Biotechnol Bioeng 2014; 111: 1900–1905.
Doyle AD, Yamada KM . Mechanosensing via cell-matrix adhesions in 3D microenvironments. Exp Cell Res 2016; 343: 60–66.
Termini CM, Cotter ML, Marjon KD et al. The membrane scaffold CD82 regulates cell adhesion by altering α4 integrin stability and molecular density. Mol Biol Cell 2014; 25: 1560–1573.
Iskratsch T, Yu CH, Mathur A et al. FHOD1 is needed for directed forces and adhesion maturation during cell spreading and migration. Dev Cell 2013; 27: 545–559.
Shih YR, Hwang Y, Phadke A et al. Calcium phosphate-bearing matrices induce osteogenic differentiation of stem cells through adenosine signaling. Proc Natl Acad Sci 2014; 111: 990–995.
Kang H, Shih YR, Nakasaki M et al. Small molecule-driven direct conversion of human pluripotent stem cells into functional osteoblasts. Sci Adv 2016; 2: e1600691.
Pullisaar H, Reseland JE, Haugen HJ et al. Simvastatin coating of TiO2 scaffold induces osteogenic differentiation of human adipose tissue-derived mesenchymal stem cells. Biochem Biophys Res Commun 2014; 447: 139–144.
Ren X, Tu V, Bischoff D et al. Nanoparticulate mineralized collagen scaffolds induce in vivo bone regeneration independent of progenitor cell loading or exogenous growth factor stimulation. Biomaterials 2016; 89: 67–78.
Luo Y, Shen H, Fang Y et al. Enhanced proliferation and osteogenic differentiation of mesenchymal stem cells on graphene oxide-incorporated electrospun poly (lactic-co-glycolic acid) nanofibrous mats. ACS Appl Mater Interfaces 2015; 7: 6331–6339.
Li X, Wang X, Jiang X et al. Boron nitride nanotube-enhanced osteogenic differentiation of mesenchymal stem cells. J Biomed Mater Res B Appl Biomater 2016; 104: 323–329.
Shuai C, Gao C, Feng P et al. Boron nitride nanotubes reinforce tricalcium phosphate scaffolds and promote the osteogenic differentiation of mesenchymal stem cells. J Biomed Nanotechnol 2016; 12: 934–947.
Wang J, Liu D, Guo B et al. Role of biphasic calcium phosphate ceramic-mediated secretion of signaling molecules by macrophages in migration and osteoblastic differentiation of MSCs. Acta Biomater 2017; 51: 447–460.
Chen B, Lin T, Yang X et al. Low-magnitude, high-frequency vibration promotes the adhesion and the osteogenic differentiation of bone marrow-derived mesenchymal stem cells cultured on a hydroxyapatite-coated surface: the direct role of Wnt/β-catenin signaling pathway activation. Int J Mol Med 2016; 38: 1531–1540.
Hao L, Fu X, Li T et al. Surface chemistry from wettability and charge for the control of mesenchymal stem cell fate through self-assembled monolayers. Colloids Surf B Biointerfaces 2016; 148: 549–556.
Yan X, Yang W, Shao Z et al. Graphene/single-walled carbon nanotube hybrids promoting osteogenic differentiation of mesenchymal stem cells by activating p38 signaling pathway. Int J Nanomed 2016; 11: 5473–5484.
Zhang Y, Xu J, Ruan YC et al. Implant-derived magnesium induces local neuronal production of CGRP to improve bone-fracture healing in rats. Nat Med 2016; 22: 1160–1169.
Singh SS, Roy A, Lee B et al. Study of hMSC proliferation and differentiation on Mg and Mg-Sr containing biphasic β-tricalcium phosphate and amorphous calcium phosphate ceramics. Mater Sci Eng C Mater Biol Appl 2016; 64: 219–228.
Yang F, Yang D, Tu J et al. Strontium enhances osteogenic differentiation of mesenchymal stem cells and in vivo bone formation by activating Wnt/catenin signaling. Stem Cells 2011; 29: 981–991.
Büttner M, Möller S, Keller M et al. Over-sulfated chondroitin sulfate derivatives induce osteogenic differentiation of hMSC independent of BMP-2 and TGF-β1 signalling. J Cell Physiol 2013; 228: 330–340.
Hu N, Jiang D, Huang E et al. BMP9-regulated angiogenic signaling plays an important role in the osteogenic differentiation of mesenchymal progenitor cells. J Cell Sci 2013; 126: 532–541.
Paul K, Padalhin AR, Linh NT et al. A study of BMP-2-loaded bipotential electrolytic complex around a biphasic calcium phosphate-derived (BCP) scaffold for repair of large segmental bone defect. PLoS One 2016; 11: e0163708.
Yuan Z, Li Q, Luo S et al. PPARγ and Wnt signaling in adipogenic and osteogenic differentiation of mesenchymal stem cells. Curr Stem Cell Res Ther 2016; 11: 216–225.
Wang Q, Chen B, Cao M et al. Response of MAPK pathway to iron oxide nanoparticles in vitro treatment promotes osteogenic differentiation of hBMSCs. Biomaterials 2016; 86: 11–20.
Jiang Z, Hua Y . Hydrogen sulfide promotes osteogenic differentiation of human periodontal ligament cells via p38-MAPK signaling pathway under proper tension stimulation. Arch Oral Biol 2016; 72: 8–13.
Yuan X, Cao J, He X et al. Ciliary IFT80 balances canonical versus non-canonical hedgehog signalling for osteoblast differentiation. Nat Commun 2016; 7: 11024.
Shi Y, Chen J, Karner CM et al. Hedgehog signaling activates a positive feedback mechanism involving insulin-like growth factors to induce osteoblast differentiation. Proc Natl Acad Sci USA 2015; 112: 4678–4683.
Montgomery SR, Nargizyan T, Meliton V et al. A novel osteogenic oxysterol compound for therapeutic development to promote bone growth: activation of hedgehog signaling and osteogenesis through smoothened binding. J Bone Miner Res 2014; 29: 1872–1885.
Kohn A, Rutkowski TP, Liu Z et al. Notch signaling controls chondrocyte hypertrophy via indirect regulation of Sox9. Bone Res 2015; 3: 15021.
Hilton MJ, Tu X, Wu X et al. Notch signaling maintains bone marrow mesenchymal progenitors by suppressing osteoblast differentiation. Nat Med 2008; 14: 306–314.
Engin F, Yao Z, Yang T et al. Dimorphic effects of Notch signaling in bone homeostasis. Nat Med 2008; 14: 299–305.
Rao RR, Ceccarelli J, Vigen ML et al. Effects of hydroxyapatite on endothelial network formation in collagen/fibrin composite hydrogels in vitro and in vivo . Acta Biomater 2014; 10: 3091–3097.
Ritz U, Götz H, Baranowski A et al. Influence of different calcium phosphate ceramics on growth and differentiation of cells in osteoblast-endothelial co-cultures. J Biomed Mater Res B Appl Biomater 2017; 105: 1950–1962.
Mao L, Xia L, Chang J et al. The synergistic effects of Sr and Si bioactive ions on osteogenesis, osteoclastogenesis and angiogenesis for osteoporotic bone regeneration. Acta Biomater 2017; 61: 217–232.
van Gastel N, Torrekens S, Roberts SJ et al. Engineering vascularized bone: osteogenic and proangiogenic potential of murine periosteal cells. Stem Cells 2012; 30: 2460–2471.
Kargozar S, Lotfibakhshaiesh N, Ai J et al. Strontium-and cobalt-substituted bioactive glasses seeded with human umbilical cord perivascular cells to promote bone regeneration via enhanced osteogenic and angiogenic activities. Acta Biomater 2017; 58: 502–514.
Shie MY, Chiang WH, Chen IW et al. Synergistic acceleration in the osteogenic and angiogenic differentiation of human mesenchymal stem cells by calcium silicate-graphene composites. Mater Sci Eng C Mater Biol Appl 2017; 73: 726–735.
Li H, Li J, Jiang J et al. An osteogenesis/angiogenesis-stimulation artificial ligament for anterior cruciate ligament reconstruction. Acta Biomater 2017; 54: 399–410.
Wang G, Roohani-Esfahani SI, Zhang W et al. Effects of Sr-HT-Gahnite on osteogenesis and angiogenesis by adipose derived stem cells for critical-sized calvarial defect repair. Sci Rep 2017; 7: 41135.
Kim JJ, El-Fiqi A, Kim HW . Synergetic cues of bioactive nanoparticles and nanofibrous structure in bone scaffolds to stimulate osteogenesis and angiogenesis. ACS Appl Mater Interfaces 2017; 9: 2059–2073.
Acknowledgements
This work was supported by the following funds: (1) the Natural Science Foundation of China (51575537, 81572577, and 51705540); (2) the Hunan Provincial Natural Science Foundation of China (2016JJ1027); (3) the Project of Innovation-driven Plan of Central South University (2016CX023); (4) the Open-End Fund for the Valuable and Precision Instruments of Central South University; (5) the Fund of the State Key Laboratory of Solidification Processing in NWPU (SKLSP201605); (6) the National Postdoctoral Program for Innovative Talents (BX201700291); and (7) the Project of State Key Laboratory of High Performance Complex Manufacturing, Central South University.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Competing interests
The authors declare no conflict of interest.
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Gao, C., Peng, S., Feng, P. et al. Bone biomaterials and interactions with stem cells. Bone Res 5, 17059 (2017). https://doi.org/10.1038/boneres.2017.59
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1038/boneres.2017.59