Abstract
Urban pollution due to roadways is perceived as a major obstacle to implementing low-energy ventilation design strategies in urban non-domestic buildings. As part of a project to evaluate the use of a computational fluid flow model as an environmental design tool for urban buildings, this paper seeks to address the impact of pollution from roadways on buildings in areas of restricted topography and assess dominant influencing factors and other requirements for testing the flow model predictions. Vertical profiles of carbon monoxide (CO) and temperature at the facade of a building in a Central London street, in addition to above-roof wind speed and direction, were measured over a period of three months. The street has a height-to-width (h/W) ratio of 0.6 and is of asymmetric horizontal alignment. The air flows in the area surrounding the building were modelled using a computational fluid flow model for two orthogonal wind directions. CO concentrations were calculated from the steady-state flow field in order to place point measurements in the context of the flow field, identify persistent features in the measured data attributable to the flow structure and, by comparison with measurements, identify further testing requirements.
Some qualitative and quantitative agreement between measured and modelled data was obtained. Measured CO levels at the building facade and vertical variations of CO were small, as predicted by the model. A wake-interference type flow was predicted by the model for wind speeds >2ms-1 with formation of a vortex cell occurring for roof-level wind speeds >5ms-1 for the cross-wind direction, which was reflected in the measured CO levels and facade gradients. A direction-dependent inverse relationship was noted, both in the model and measurements, between above-roof wind speed and facade CO levels although statistical correlations in the time series were poor. CO concentrations at the facade were found to increase with height frequently, as well as decrease, especially for parallel winds. It is expected that mechanical turbulence due to vehicles was largely responsible. In comparison, thermal stratification appeared to play only a minor role in controlling vertical mixing in the street, under low wind speed conditions.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.References
Alamdari, F, Edwards, SC and Hammond, GP (1991) “Microclimate performance of an open office building: a case study in thermo-fluid modelling”, In CFD — tool or toy? Proc. IMechE Conference, London, 1991.
Benson, P E (1992), A review of the development and application of the CALINE3 and CALINE4 Models, Atmospheric Environment, Vol. 26B,No. 3, 379–390.
Dabberdt, WF and Hoydysh, WD (1991) Street canyon dispersion: sensitivity to block shape and entrainment, Atmospheric Environment, 25A, 1143–1153.
Dabberdt, WF and Hoydysh, WD (1994) A fluid modelling study of concentration distributions at urban intersections, The Science of the Total Environment, 146/147, 425–432.
de Paul, FT and Sheih, CM (1985) A tracer study of dispersion in an urban street canyon, Atmospheric Environment, 19, 555–559.
de Paul, FT and Sheih, CM (1986) Measurements of wind velocities in a street canyon, Atmospheric Environment, 20, 455–459.
FloVENT User Manual, Flomerics Ltd. 1994.
Hall, DJ, Kukadia, V, Walker, S and Marsland, G (1995) Plume Dispersion from Chemical Warehouse Fires, BRE Client Report No. CR 56/95.
Hunter, LJ, Watson, ID and Johnson, GT (1990/91) Modelling air flow regimes in urban canyons, Energy and Buildings, 14–15, 315–324.
Kato, N, Okhuma, T, Kim, JR, Murakawa, H and Nahori, Y (1992) Full scale measurements of wind velocity in two urban areas using an ultrasonic anemometer, J. Wind Eng. Ind. Aerodyn., 41–44, 67–78.
Launder, BE and Spalding, DB (1974) The numerical computation of turbulent flows, Computer Methods in Appl. Mech. and Eng., 3, 269–289.
Murakami, S, Mochida, A, Hayashi, Y and Hibi, K (1990/1991) Numerical simulation of velocity field and diffusion field and diffusion field in an urban area, Energy and Buildings, 15–16, 345–356.
Ní Riain, C, Croxford, B, Littler, J and Penn A. “City Space and Pollution Dispersion: a monitoring and modelling exercise”, In Jenks, M, Burton, E and Williams, K (eds.) The Compact City: a sustainable urban form?, E & FN Spon, London, 1996.
Oke, TR (1988) Street design and the urban canopy layer, Energy and Buildings, 11, 103–113.
Panofsky, HA and Dutton, JA, Amospheric Turbulence, John Wiley & Sons, New York, 1984.
Patankar, SV, Numerical Heat Transfer and Fluid Flow, Hemisphere, Washington, 1980.
Qin, Y and Kot, SC (1993) Dispersion of vehicular emissions in street canyon, Guangzhou City, South China (P.R.C.), Atmospheric Environment, 27B, 283–291.
Rotach, M W (1995) Profiles of turbulence statistics in and above an urban street canyon, Atmospheric Environment, 29, 1473–1486.
Sini, J-F, Anquetin, S and Mestayer, PG (1996) Pollutant dispersion and thermal effects in urban street canyons, Atmospheric Environment, 30B, 2659–2677.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
N' Riain, C., Fisher, B., Martin, C.J. et al. Flow Field and Pollution Dispersion in a Central London Street. Environ Monit Assess 52, 299–314 (1998). https://doi.org/10.1023/A:1005980614071
Issue Date:
DOI: https://doi.org/10.1023/A:1005980614071