Abstract
We have recently developed a novel spray-coating method, called the “substrate vibration-assisted spray coating” (SVASC) (Zabihi and Eslamian in J Coat Technol Res 12:711–719, 2015), in which ultrasonic vibration is imposed on the substrate to improve the spray-on film and coating characteristics. In that work, the SVASC method was introduced, and its effectiveness on the uniformity and electrical conductivity of PEDOT:PSS films, used in emerging solar cells, was demonstrated. The present work reports unprecedented results on the effect of the ultrasonic vibration power on wetting/dewetting of PEDOT:PSS films. It is observed that, while the application of a low-power ultrasonic vibration (LPUV) improves the surface wetting and film coverage through improving droplet spreading and coalescence and repairing of the dewetted areas, a high-power ultrasonic vibration (HPUV) promotes dewetting, resulting in less coverage and the formation of a nonuniform film. The improved wetting due to the application of the LPUV has opened a window of opportunity for the fabrication of intact thin films and related thin film devices. On the other hand, the controlled dewetting process due to the application of the HPUV may have novel applications in template fabrication and self-assembly in nanotechnology. Here, we also study the effects of the application of multipass spraying compared with single-pass spraying strategy, and the application of using two co-solvents on PEDOT:PSS film characteristics. The results confirm that the utilization of isopropyl alcohol (IPA) as a co-solvent added to the PEDOT:PSS precursor solution improves the surface wettability and film coverage, compared to the films made using demethylformamide (DMF), as the co-solvent.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.References
Eslamian, M, “Spray-on Thin Film PV Solar Cells: Advances, Potentials and Challenges.” Coatings, 4 60–84 (2014)
Andrade, R, Skurtys, O, Osorio, F, “Drop Impact Behavior on Food Using Spray Coating: Fundamentals and Applications.” Food Res. Int., 54 397–405 (2013)
Dressler, DM, Li, LKB, Green, SI, Davy, MH, Eadie, DT, “Newtonian and Non-Newtonian Spray Interaction with a High-Speed Moving Surface.” At. Sprays, 19 19–39 (2012)
Xie, Y, Gao, S, Eslamian, M, “Fundamental Study on the Effect of Spray Parameters on Characteristics of P3HT:PCBM Active Layers Made by Spray Coating.” Coatings, 5 488–510 (2015)
Eslamian, M, “A Mathematical Model for the Design and Fabrication of Polymer Solar Cells by Spray Coating.” Dry. Technol., 31 405–413 (2013)
Lee, J-H, Yoshikawa, S, Sagawa, T, “Fabrication of Efficient Organic and Hybrid Solar Cells by Fine Channel Mist Spray Coating.” Sol. Energy Mater. Sol. Cells, 127 111–121 (2014)
Tait, JG, Worfolk, BJ, Maloney, SA, Hauger, TC, Elias, AL, Buriak, JM, Harris, KD, “Spray Coated High-Conductivity PEDOT:PSS Transparent Electrodes for Stretchable and Mechanically-Robust Organic Solar Cells.” Sol. Energy Mater. Sol. Cells, 110 98–106 (2013)
Barrows, AT, Pearson, AJ, Kwak, CK, Dunbar, ADF, Buckley, AR, Lidzey, DG, “Efficient Planar Heterojunction Mixed-Halide Perovskite Solar Cells Deposited via Spray-Deposition.” Energy Environ. Sci., 7 2944 (2014)
Xue, L, Han, Y, “Inhibition of Dewetting of Thin Polymer Films.” Prog. Mater Sci., 57 947–979 (2012)
Craster, RV, Matar, OK, “Dynamics and Stability of Thin Liquid Films.” Rev. Mod. Phys., 81 1131–1198 (2009)
Jacobs, K, Seemann, R, Herminghaus, S, “Stability and Dewetting of Thin Liquid Film.” arXiv:0805.4336 [cond-mat.soft]
Saramago, B, “Thin Liquid Wetting Films.” Curr. Opin. Colloid Interface Sci., 15 330–340 (2010)
Ma, M, He, Z, Yang, J, Chen, F, Wang, K, Zhang, Q, Deng, H, Fu, Q, “Effect of Film Thickness on Morphological Evolution in Dewetting and Crystallization of Polystyrene/Poly(caprolactone) Blend Films.” Langmuir, 27 13072–13081 (2011)
Srivastava, AK, Sachan, P, Samanta, C, Mukhopadhyay, K, Sharma, A, “Domain Growth of Carbon Nanotubes Assisted by Dewetting of Thin Catalyst Precursor Films.” Appl. Surf. Sci., 288 215–221 (2014)
Whitehill, J, Neild, A, Ng, TW, Martyn, S, Chong, J, “Droplet Spreading Using Low Frequency Vibration.” Appl. Phys. Lett., 98 133503 (2011)
Brunet, P, Eggers, J, Deegan, RD, “Motion of a Drop Driven by Substrate Vibrations.” Eur. Phys. J. Spec. Top., 166 11–14 (2009)
Whitehill, JD, Neild, A, Stokes, MH, “Forced Spreading Behavior of Droplets Undergoing Low Frequency Vibration.” Colloids Surf. A, 393 144–152 (2012)
Keshavarz, B, Green, SI, Davy, MH, Eadie, DT, “Newtonian Liquid Jet Impaction on A High-Speed Moving Surface.” Int. J. Heat Fluid Flow, 32 1216–1225 (2011)
Fathi, S, Dickens, PM, Fouchal, F, “Regimes of Droplet Train Impact on a Moving Surface in an Additive Manufacturing Process.” J. Mater. Process. Technol., 210 (3) 550–559 (2010)
Zabihi, F, Eslamian, M, “Substrate Vibration-Assisted Spray Coating (SVASC): Significant Improvement in Nano-structure, Uniformity, and Conductivity of PEDOT:PSS Thin Films for Organic Solar Cells.” J. Coat. Technol. Res., 12 711–719 (2015)
Zabihi, F, Eslamian, M, “Characteristics of Thin Films Fabricated by Spray Coating on Rough and Permeable Paper Substrates.” J. Coat. Technol. Res., 12 489–503 (2015)
Kim, YH, Sachse, C, Machala, ML, May, C, Müller-Meskamp, L, Leo, K, “Highly Conductive PEDOT:PSS Electrode with Optimized Solvent and Thermal Post-Treatment for ITO-Free Organic Solar Cells.” Adv. Funct. Mater., 21 1076–1081 (2011)
Kim, N, Kee, S, Lee, SH, Lee, BH, Kahng, YH, Jo, YR, Kim, BJ, Lee, K, “Highly Conductive PEDOT:PSS Nanofibrils Induced by Solution-Processed Crystallization, Adv. Mater., 26 2268–72, 2109 (2014)
Kim, K-J, Kim, Y-S, Kang, W-S, Kang, B-H, Yeom, S-H, Kim, D-E, Kim, J-H, Kang, S-W, “Inspection of Substrate-Heated Modified PEDOT:PSS Morphology for All Spray Deposited Organic Photovoltaics.” Solar Energy Mater. Solar Cells, 94 1303–1306 (2010)
Chilvery, AK, Batra, AK, Guggilla, P, “A Versatile Technique for the Fabrication of PEDOT:PSS Films for Organic Solar Cells.” Energy Sci. Technol., 4 (2) 6–11 (2012)
Eslamian, M, Newton, J, “Spray-on PEDOT:PSS and P3HT:PCBM Thin Films for Polymer Solar Cells.” Coatings, 4 85–97 (2014)
Zabihi, F, Xie, Y, Gao, S, Eslamian, M, “Morphology, Conductivity, and Wetting Characteristics of PEDOT:PSS Thin Films Deposited by Spin and Spray Coating.” Appl. Surf. Sci., 338 163–177 (2015)
Girotto, C, Moia, D, Rand, BP, Aernouts, T, Heremans, P, “Efficient Polymer Solar Cells Via an All-Spray-Coated Deposition”. Photovoltaic Specialists Conference (PVSC). IEEE, Honolulu, HI, 2010
Peh, RJ, Lu, Y, Zhao, F, Lee, C-LK, Kwan, WL, “Vacuum-Free Processed Transparent Inverted Organic Solar Cells with Spray-Coated PEDOT:PSS Anode.” Sol. Energy Mater. Sol. Cells, 95 3579–3584 (2011)
Ristenpart, WD, McCalla, PM, Roy, RV, Stone, HA, “Coalescence of Spreading Droplets on a Wettable Substrate.” Phys. Rev. Lett., 97 064501 (2006)
Tait, JG, Rand, BP, Heremans, P, “Concurrently Pumped Ultrasonic Spray Coating for Donor: Acceptor and Thickness Optimization of Organic Solar Cells.” Org. Electron., 14 1002–1008 (2013)
Acknowledgments
Financial support from Shanghai Municipal Educational Commission, Oriental Scholar 2014 Program, granted to M.E. is appreciated. Authors wish to thank Amin Rahimzadeh for measuring the vibration amplitudes of the ultrasonic transducer.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Habibi, M., Eslamian, M., Soltani-Kordshuli, F. et al. Controlled wetting/dewetting through substrate vibration-assisted spray coating (SVASC). J Coat Technol Res 13, 211–225 (2016). https://doi.org/10.1007/s11998-015-9748-2
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11998-015-9748-2