Abstract
A novel design for passive tuned concentric loops with stubs metamaterial absorbers (MMA) has been proposed for microwave regime. This proposed MMA consists of two concentric loops separated by stubs and modified with rectangular bars. The proposed MMA structure shows versatility in design and tuned between Ku-band and X-band just by varying the length of shorted stubs and rectangular bar. The MMA structure has been found highly insensitive to oblique angle of incidence and polarization for TE and TM modes of the electromagnetic wave. The total thickness of the modified designed absorber is only 0.0092 λ0, where λ0 is the free-space wavelength at the resonant frequency. The simulated results are well matched with the measured results. The widespread potential applications of the proposed structure are found in antenna design for the reduction of radar cross section suitable for stealth technology along with radar and other communication areas.
Similar content being viewed by others
References
Singh, D., & Srivastava, V. M. (2018). Low radar cross section of patch antenna using shorted stubs metamaterial absorber. International Journal of Microwave and Optical Technology (IJMOT), 13(3), 194–202.
Lee, J., Yoon, Y. J., & Lim, S. (2012). Ultra-thin polarization independent absorber using hexagonal interdigital metamaterial. Electronics and Telecommunications Research Institute Journal (ETRI), 34(1), 126–129.
Singh, D., & Srivastava, V. M. (2018). Dual resonances shorted stub circular rings metamaterial absorber. AUE-International Journal of Electronics and Communication, 83, 58–66.
Tao, H., Bingham, C. M., Strikwerda, A. C., Pilon, D., Shrekenhamer, D., Landy, N. I., et al. (2008). Highly flexible wide angle of incidence terahertz metamaterial absorber: Design, fabrication, and characteristics. Physical Review B, 78(24), 031–034.
Bharti, G., Singh, G., Jha, K. R., & Jyoti, R. (August 8–10, 2013). Circular ring frequency selective surface: A novel synthesis technique. In 6th international conference on contemporary computing (IC3) (pp. 491–496). Noida.
Ayop, O., Rahim, M. K. A., Murad, N. A., & Samsuri, N.A. (December 8–10, 2014). Polarization insensitive and wide operating angle metamaterial absorber at X-band. In IEEE Asia-Pacific conference on applied electromagnetics (APACE2014). Johor Bahru.
Patel, S. K., Argyropoulos, C., & Kosta, Y. P. (2016). Broadband compact microstrip patch antenna design loaded by multiple split ring resonator superstrate and substrate. Waves in Random and Complex Media, 27(1), 92–102.
Baviskar, J., Mulla, A., Baviskar, A., Auti, D., & Waghmare, R. (March 5–12, 2016). Performance enhancement of microstrip patch antenna array with incorporation of metamaterial lens. In IEEE aerospace conference (pp. 1–10). Yellowstone.
Li, Y., Zhang, K., Yang, L. A., & Du, L. (2017). Gain enhancement and wideband RCS reduction of a microstrip antenna using triple-band planar electromagnetic band-gap structure. Progress in Electromagnetics Research Letters, 65, 103–108.
Zhao, Y., Gao, J., Cao, X., Liu, T., Xu, L., Liu, X., et al. (2017). In-band RCS reduction of waveguide slot array using metasurface bars. IEEE Transactions on Antennas and Propagation, 65(2), 943–947.
Singh, D., & Srivastava, V. M. (2018). An analysis of RCS for dual-band slotted patch antenna with a thin dielectric using shorted stubs metamaterial absorber. AUE-International Journal of Electronics and Communication, 90, 53–62.
Li, W., & Valentine, J. (2014). Metamaterial perfect absorber based hot electron photodetection. Nano Letters, 14(6), 3510–3514.
Astorino, M. D., Frezza, F., & Tedeschi, N. (2017). Ultra-thin narrow-band, complementary narrow-band, and dual-band metamaterial absorbers for applications in the THz regime. Journal of Applied Physics, 121, 1031–10310.
Zhang, J., Wang, G., Zhang, B., He, T., He, Y., & Shen, J. (2016). Photo-excited broadband tunable terahertz metamaterial absorber. Optical Materials, 54, 32–36.
Ma, B., Liu, S., Kong, X., Jiang, Y., Xu, J., & Yang, H. (2016). A novel wide-band tunable metamaterial absorber based on varactor diode/graphene. Optik-International Journal for Light and Electron Optics, 127(5), 3039–3043.
Li, J., Jiang, J., He, Y., Xu, W., Chen, M., Miao, L., et al. (2016). Design of a tunable low-frequency and broadband radar absorber based on active frequency selective surface. IEEE Antennas and Wireless Propagation Letters, 15, 774–777.
Qi, L., Li, C., & Fang, G. (2014). Tunable terahertz metamaterial absorbers using active diodes. International Journal of Electromagnetics and Applications, 4(3), 57–60.
Yuan, H., Zhu, B., Zhao, J., & Feng, Y. (October 23–25, 2013). Metamaterial absorber with active frequency tuning in X-band. In Proceedings of the international symposium on antennas and propagation (ISAP) (pp. 1219–1221). Nanjing.
Ucar, M. H. B., Sondas, A., & Erdemli, Y. E. (2008). Switchable split-ring frequency selective surfaces. Progress in Electromagnetics Research B, 6, 65–79.
Chen, X., Grzegorczyk, T. M., Wu, B. I., Pacheco, J., & Kong, J. A. (2004). Robust method to retrieve the constitutive effective parameters of metamaterials. Physical Review E, 70, 6081–6087.
Watts, C. M., Liu, X., & Padilla, W. J. (2012). Metamaterial electromagnetic wave absorbers. Advanced Optical Materials, 24(23), OP98–OP120.
Dai, S., Zhao, D., Li, Q., & Qiu, M. (2013). Double-sided polarization-independent plasmonic absorber at near-infrared region. Optics Express, 21(11), 13125–13133.
Liu, W. (January 29–31, 2015). The study status and development of metamaterial absorber. In International conference on logistics engineering, management and computer science (LEMCS 2015) (pp. 1318–1322). Shenyang.
Singh, D., & Srivastava, V. M. (January 5–7, 2017). Triple band regular decagon shaped metamaterial absorber for X-band applications. In IEEE international conference on computer communication and informatics (ICCCI-2017) (pp. 411–415). Coimbatore.
Smith, D. R., Vier, D. C., Koschny, T., & Soukoulis, C. M. (2005). Electromagnetic parameter retrieval from inhomogeneous metamaterials. Physical Review E, 71, 6171–61711.
Padooru, Y. R., Yakovlev, A. B., Kaipa, C. S. R., Medina, F., & Mesa, F. (2011). Circuit modeling of multiband high-impedance surface absorbers in the microwave regime. Physical Review B, 84, 1081-11.
Qiaoxia, G., Xiaomin, L., Zhiyong, D., Xiaoqiang, S., Fengying, M., & Erjun, L. (2013). Study on absorbing properties and mechanism of cross-shaped metamaterial absorber. Infrared and Laser Engineering, 42(6), 1528–1532.
Landy, N. I., Bingham, C. M., Tyler, T., Jokerst, N., Smith, D. R., & Padilla, W. J. (2009). Design, theory, and measurement of a polarization insensitive absorber for terahertz imaging. Physical Review B, 79, 1041–1046.
Landy, N. I., Sajuyigbe, S., Mock, J. J., Smith, D. R., & Padilla, W. J. (2008). Perfect metamaterial absorber. Physical Review Letter, 100(20), 1–4.
Tao, H. (2008). Highly flexible wide angle of incidence terahertz metamaterial absorber: Design, fabrication, and characterization. Physical Review B, 78, 1031–1034.
Li, D., Szabo, Z., Qing, X., Li, P., & Chen, Z. N. (2012). A high gain antenna with an optimized metamaterial inspired superstrate. IEEE Transactions on Antennas and Propagation, 60(12), 6018–6023.
Szabo, Z., Park, G. H., Hedge, R., & Li, P. (2010). A unique extraction of metamaterial parameters based on Kramers–kronig relationship. IEEE Transactions on Microwave Theory and Techniques, 58(10), 2046–2653.
Parazzoli, C. G., Greegor, R. B., & Tanielian, M. H. (2007). Physics of negative refraction and negative index materials (Vol. 98, pp. 261–329). Berlin: Springer.
Zarifi, D., Soleimani, M., & Nayyeri, V. (2012). Parameter retrieval of chiral metamaterials based on the causality principle. International Journal of RF and Microwave Computer-Aided Engineering, 23(5), 610–618.
Ghosh, S., Bhattacharyya, S., Chaurasiya, D., & Srivastava, K. V. (2015). An ultrawideband ultrathin metamaterial absorber based on circular split rings. IEEE Antennas and Wireless Propagation Letters, 14(1), 1172–1175.
Lee, J., & Lim, S. (2011). Bandwidth-enhanced and polarization-insensitive metamaterial absorber using double resonance. Electronics Letters, 47(1), 8–9.
Liu, Y., Gu, S., Luo, C., & Zhao, X. (2012). Ultra-thin broadband metamaterial absorber. Applied Physics A, 108(1), 19–24.
Soheilifar, M. R., & Sadeghzadeh, R. A. (2014). Design, fabrication and characterisation of scaled and stacked layers planar metamaterial absorber. IET Microwaves, Antennas and Propagation, 9(1), 86–93.
Cheng, Y., Yang, H., Cheng, Z., & Wu, N. (2011). Perfect metamaterial absorber based on a split-ring-cross resonator. Applied Physics A, 102(1), 99–103.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Singh, D., Srivastava, V.M. Design Implementation of Concentric Loops with Stubs Metamaterial Absorber. Wireless Pers Commun 104, 129–148 (2019). https://doi.org/10.1007/s11277-018-6012-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11277-018-6012-y