Abstract
This paper presents a novel methodology for positioning an explosive ordnance device (EOD) which consists of a mobile manipulator with 12° of freedom. The approach uses an extension of a homogeneus transformation graph (HTG) which can be used in the kinematic modeling of mobile manipulators and unmanned aerial vehicles. In this approach the complete kinematics is modeled as one unit in contrast to previous approaches where the manipulator and mobile body are decoupled. The system is tested in several escenarios (simulated and real experimentation) like approaching to an explosive device location on the plane as well as in slope ways, climbing stairs, lifting itself and manipulating procedures. All the aforementioned scenarios were developed using the HTG which establishes the appropriate transformations and interaction parameters of the coupled system. Finally, the system is tested (simulated and real experimentation) for positioning its end device in a target with a RMS positioning average error ofr 7.91 mm which is acceptable for this kind of devices.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.References
www.qinetiq-na.com/products/unmanned-systems/talon/, (last visit 8.10.2013)
www.northropgrumman.com/capabilities/remotec (last visit 8.10.2013)
Will, P., Grossman, D.: An experimental system for computer controlled mechanical assembly. IEEE Trans. Comput 24, 879–888 (1975)
Jian-Jun, Z., Ru-Qing, Y., Wei-Jun, Z., Xin-Hua, W., Jun, Q.: Research on Semi-Automatic Bomb Fetching for an EOD Robot. ARS Advanced Robotics System (2007)
Dongseok, R., Chang-Soon, H., Sungchul, K., Munsang, K., Jae-Bok, S.: Wearable haptic-based multi-modal teleoperation of field mobile manipulator for explosive ordnance disposal. Safety, Security and Rescue Robotics, Workshop, IEEE International (2005)
Sungchul, K., Changhyun, C., Jonghwa, L., Dongseok, R., Changwoo, P., Kyung-Chul, S., Munsang, K.: ROBHAZ-DT2 Design and integration of passive double tracked mobile manipulator system for explosive ordnance disposal. In: Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (2003)
Yamamoto, Y., Yun, X.: Coordinating locomotion and manipulation of a mobile manipulator. IEEE Transactions on Automatic Control, 6th edn., vol. 39, June (1994)
Mazur, A., Szakiel, D.: On path following control of nonholonomic mobile manipulators. Int. J. Appl. Math. Comput. Sci. 19(4), 561–574 (2009)
Bayle, B., Fourquet, J.Y., Renaud, M.: Nonholonomic mobile manipulators: Kinematics, velocities and redundancies. J. Intell. Robot. Syst. 36 (2003)
Bayle, B., Fourquet, J.Y., Renaud, M.: Manipulability of wheeled mobile manipulators: Application to motion generation. Int. J. Robot. Res. 22(708), 565–581 (2003)
Krus, P.: Distributed Techniques for Modelling and Simulation of Engineering Systems. Technical Report. Department of Mechanical Engineering Linköping University, Linköping (2000)
Wiens, G.I.: Effects of dynamic coupling in mobile robotic systems. In: Proceedings SME Robotics Research World Congress, Gaithersburg MD, pp. 43–57 (1989)
Padois, V., Fourquet, J.Y., Chiron, P.: Kinematic and dynamic model-based control of wheeled mobile manipulators: a unified framework for reactive approaches. Robotica 25(2), 157–173 (2007). doi:10.1017/S0263574707003360
Kang, S., Komoriya, K., Yokoi, K., Koutoku, T., Tanie, K.: Utilization of inertial effect in damping-based posture control of mobile manipulator. In: Proceedings of the 2001 IEEE International Conference on Robotics and Automation, pp. 1277–1282. Seoul (2001)
Umeda, Y., Nakamura, D., Mukarami, T., Ohnishi, K.: Hybrid position/force control of a mobile manipulator based on cooperative task sharing. In: Proceedings of the IEEE International Symposium on Industrial Electronics, Bled, Slovenia (1999)
Brock, O., Khatib, O., Viji, S.: Task consistent obstacle avoidance and motion behavior for mobile manipulation. In: Proceedings of the International Conference on Robotics and Automation, pp. 388–393. Washington DC (2002)
Kang, Y., Li, Z., Dong, Y., Xi, H.: Markovian based fault-tolerant control for wheeled mobile manipulators. IEEE Trans. Control Syst. Technol. 20(1), 266–276 (2012)
Yangmin, L., Yugang, L.: Dynamics and Control for Nonholonomic Mobile Modular Manipulators, Mobile Robotics, Moving Intelligence. InTech (2006)
White, G.D., Bhatt, R.M., Krovi, V.N.: Dynamic redundancy resolution in a nonholonomic wheeled mobile manipulators. Robotica J. Camb. Univ. Press. 25(2), 147–156 (2006)
Maza, I., Ollero, A.: Hemero: a matlab-simulink toolbox for robotics. 1st Workshop on Robotics Education and Training, pp. 43–50 (2001)
Padois, V., Fourquet, J.Y., Chiron, P., Renaud, M.: On contact transition for nonholonomic mobile manipulators. 9th International Symposium on Experimental Robotics, ISER, pp. 207–216 (2006)
Li, Z., Li, J., Kang, Y.: Adaptive robust coordinated control of multiple mobile manipulators interacting with rigid environments. Automatica 46, 2028–2034 (2010)
Li, Z., Yang, C., Tang, Y.: Decentralized adaptive fuzzy control of coordinated multiple mobile manipulators interacting with nonrigid environments. IET Contr. Theor. Appl. 7(3), 397–410 (2013)
Li, Z., Ge, S.S., Ming, A.: Adaptive robust motion/force control of holonomic constrained nonholonomic mobile manipulators. IEEE Trans. Syst. Man Cybernet. B 37(3), 607–617 (2007)
Paul, R.P.: Robot manipulators: mathematics, programming and control. MIT Press, Massachusetts (1981)
Zúñiga-Avilés, L.A., Pedraza-Ortega, J.C., Gorrostieta, E., Ramos, J.M.: Analysis of dynamic behavior of an EOD mechatronic unit. In: International Conference on Electronics, Robotics and Automotive Mechanics Conference, CERMA (2009)
Zuñiga-Avilés, L.A., Pedraza-Ortega, J.C., Gorrostieta, L., García-Valdovinos, J.M., Ramos, J.M.: Herrera: Modeling and simulation of a mechatronic unit EOD/IEDD. In: International Conference on Methods and Models in Automation and Robotics (2009)
Zúñiga-Avilés, L.A., Pedraza, J.C., Gorrostieta, E., Ramos, J.M.: New approach to modeling and simulation methodology for the mechatronic design of IEDD-unmanned wheeled mobile manipulator. In: International Conference on Electronics, Robotics and Automotive Mechanics Conference, CERMA, México, D.F. (2010)
Zúñiga-Avilés, L.A., Skodny, T., Pedraza-Ortega, J.C., Gorrostieta, E.: Systematic Analysis of an IEDD unit based in a new methodology for modeling and simulation. J. Adv. Robot. INTECH, Austria 7, 93–100 (2010)
Apostolopoulos, D.: Analytical Configuration of Wheeled Robotic Locomotion. Carnegie Mellon University, Doctoral Thesis, U.S.A. (2001)
Skodny, T.: Forward and inverse kinematics of IRb-6 manipulator. Mach. Theory Pergamon Press. Lond. 30(7), 1039–1056 (1995)
National Defense Secretariat: Searching and localization of explosive devices and explosive traps manual, Mexican Industrial Army General Direction. Mexico (2005)
Brodie, T.G.: Bombs and bombings: A handbook to protection, security, disposal, and investigation for industry, police and fire Departments. Thomas Publisher, ltd, Illinois, U.S.A. (2005)
Wang, B., Li, Z., Ye, W., Xie, Q.: Development of human-machine interface for teleoperation of a mobile manipulator. Int. J. Contr. Automat. Syst. 10(6), 1225–1231 (2012)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zúñiga-Avilés, L.A., Pedraza-Ortega, J.C., Gorrostieta-Hurtado, E. et al. HTG-Based Kinematic Modeling for Positioning of a Multi-Articulated Wheeled Mobile Manipulator. J Intell Robot Syst 76, 267–282 (2014). https://doi.org/10.1007/s10846-014-0032-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10846-014-0032-y