Abstract
Current CMOS (Complementary Metal Oxide Semiconductor) technologies show an increasing susceptibility to a rising amount of failure sources. This includes also radiation induced soft errors, which requires countermeasures on several design levels. Hereby, BBICS (Bulk Built-In Current Sensors) represent a promising approach on circuit level. However, it is expected that these circuits, like similar sensors measuring substrate effects, are strongly susceptible to substrate noise. The intention of this work is an in-depth noise analysis of representative bulk sensors based on extracted layout data. Thereby, several aspects are considered, like sensor activation thresholds, impact of the distance to the noise source, and noise generation by test circuits. Results indicate that already noise RMS level of 5 to 9 % of the supply voltage can lead to false detections, which are values in the same order of magnitude of noise generated by test circuits.
Similar content being viewed by others
References
Arnaud A, Galup-Montoro C (2004) Consistent noise models for analysis and design of CMOS circuits. IEEE Trans Circuits Syst I Reg Papers 51(10):1909–1915. doi:10.1109/TCSI.2004.835028
Bastos RP, Di Natale G, Flottes ML, Rouzeyre B (2011) How to sample results of concurrent error detection schemes in transient fault scenarios? In: Proc. 12th European Conference on Radiation and Its Effects on Components and Systems (RADECS), 19–23 Sept. 2011. pp 635–642. doi:10.1109/radecs.2011.6131361
Bastos RP, Torres FS, Dutertre JM, Flottes ML, Di Natale G, Rouzeyre B (2013) A Single Built-in Sensor to Check Pull-up and Pull-down CMOS Networks against Transient Faults. In: Proc. 23rd International Workshop on Power and Timing Modeling, Optimization and Simulation (PATMOS)
Baumann RC (2005) Radiation-induced soft errors in advanced semiconductor technologies. IEEE Trans Device Mater Reliab 5(3):305–316. doi:10.1109/Tdmr.2005.853449
Briaire J, Krisch KS (2000) Principles of substrate crosstalk generation in CMOS circuits. IEEE Trans Comput-Aided Design 19(6):645–653. doi:10.1109/43.848086
Bronckers S, Van der Plas G, Vandersteen G, Rolain Y (2010) Substrate noise coupling mechanisms in lightly doped CMOS transistors. IEEE Trans Instrum Meas 59(6):1727–1733. doi:10.1109/Tim.2009.2024370
Checka N (2005) Substrate noise analysis and techniques for mitigation in Mixed-Signal RF Systems. Massachusetts Institute of Technology, USA
Checka N, Chandrakasan A, Reif R (2005) Substrate noise analysis and experimental verification for the efficient noise prediction of a digital PLL. IEEE Trans Cust Integr Cir:473–476
Cui Y, Niu GF, Rezvani A, Taylor SS (2008) Measurement and modeling of drain current thermal noise to shot noise ratio in 90 nm CMOS. 2008 IEEE Topical Meeting on Silicon Monolithic Integrated Circuits in RF Systems, Digest of Papers:118–121
Garg R, Jayakumar N, Khatri SP, Choi GS (2009) Circuit-Level Design approaches for radiation-hard digital electronics. IEEE Trans VLSI Syst 17(6):781–792. doi:10.1109/Tvlsi.2008.2006795
Karnik T, Hazucha P (2004) Characterization of soft errors caused by single event upsets in CMOS processes. IEEE Trans Dependable Secure Comput 1(2):128–143. doi:10.1109/TDSC.2004.14
Katsikadelis J (2002) Boundary elements theory and applications. Elsevier
Le J, Hanken C, Held M, Hagedorn MS, Mayaram K, Fiez TS (2012) Experimental characterization and analysis of an asynchronous approach for reduction of substrate noise in digital circuitry. IEEE Trans. VLSI Syst 20(2):344–356. doi:10.1109/Tvlsi.2010.2100835
Leach WM (1994) Fundamentals of Low-Noise Analog Circuit-Design. IEEE P 82(10):1515–1538. doi:10.1109/5.326411
Leite F, Balen T, Herve M, Lubaszewski M, Wirth G (2009) Using bulk built-In current sensors and recomputing techniques to mitigate transient faults in microprocessors. In: Proc. Latin Amer Test Work, pp 147-152
Lyons RE, Vanderkulk W (1962) The use of triple-modular redundancy to Improve Computer reliability. IBM J Res Dev 6(2):200–209
Mahmutoglu AG, Demir A, Roychowdhury J (2013) Modeling and Analysis of (Nonstationary) Low Frequency Noise in Nano Devices: A Synergistic Approach based on Stochastic Chemical Kinetics. 2013 Ieee/Acm. In: Proc. IEEE/ACM International Conference on Computer-Aided Design (ICCAD), pp 500–507
Manghisoni M, Ratti L, Re V, Speziali V, Traversi G (2006) Noise Characterization of 130 and 90 nm CMOS Technologies for Analog Front-end Electronics. In: Proc. IEEE Nucl Sci Conf pp 214–218. doi:10.1109/Nssmic.2006.356142
Melo JGM, Sill Torres F, Bastos RP (2015) Exploration of Noise Robustness and Sensitivity of Bulk Current Sensors for Soft Error Detection. In: Proc. 6th International Workshop on, Salvador, Brazil
Miyoshi T, Arai Y, Ahmed M, Kapusta P, Ichimiya R, Ikemoto Y, Fujita Y, Tauchi K, Takeda A (2012) High-Resolution Monolithic Pixel Detectors in SOI Technology. In: Proc. 6th International Workshop on Semiconductor Pixel Detectors for Particles and Imaging
Narsale A, Huang MC (2009) Variation-tolerant hierarchical voltage monitoring circuit for soft error detection. In: Proc. Int Symp Quality Electronic Design, 16–18 March 2009. pp 799–805. doi:10.1109/isqed.2009.4810395
Nassar M, Dabak A, Il Han K, Pande T, Evans BL (2012) Cyclostationary noise modeling in narrowband powerline communication for Smart Grid applications. In: Proc. IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP), 25–30 March 2012. pp 3089–3092. doi:10.1109/ICASSP.2012.6288568
Neto EH, Ribeiro I, Vieira M, Wirth G, Kastensmidt FL (2006) Using bulk built-in current sensors to detect soft errors. IEEE Micro 26(5):10–18
Neto EH, Kastensmidt FL, Wirth G (2008) Tbulk-BICS: A built-In current sensor robust to process and temperature variations for soft error detection. IEEE Trans Nucl Sci 55(4):2281–2288. doi:10.1109/Tns.2008.920426
Oh Y, Jeon S, Rieh JS (2010) Variation in RF performance of MOSFETs due to substrate digital noise coupling. IEEE Microw Wirel Co 20(7):384–386. doi:10.1109/Lmwc.2010.2049431
Ong SN, Yeo KS, Chew KWJ, Chan LHK (2014) Substrate-induced noise model and parameter extraction for high-frequency noise modeling of sub-Micron MOSFETs. IEEE Trans Microw Theory 62(9):1973–1985. doi:10.1109/Tmtt.2014.2340375
QRC Substrate Technology Characterization Manual Product Version 11.1.2 (2012) Cadence Design Systems, Inc
Reference Manual for Generic 90 nm Salicide 1.2 V/2.5 V 1P 9 M Process Design Kit (PDK) Revision 4.3. (2008) Cadence Design Systems, Inc
Salman E (2009) Switching noise and timing characteristics in nanoscale integrated circuits. University of Rochester, New York
Shoji M (2014) Theory of CMOS digital circuits and circuit failures. Princeton University Press
Shomalnasab G, Zhang LH (2015) New analytic model of coupling and substrate capacitance in Nanometer Technologies. IEEE Trans Vlsi Syst 23(7):1268–1280. doi:10.1109/Tvlsi.2014.2334492
Sill Torres F, Possamai Bastos R (2013) Detection of transient faults in Nanometer Technologies by using modular built-In current sensors. Integrated Circuits Syst J 8(5):89–97
Srinivasan J, Adve SV, Bose P, Rivers JA (2004) The impact of technology scaling on lifetime reliability. In: Proc. International Conference on Dependable Systems and Networks, pp 177–186. doi:10.1109/dsn.2004.1311888
Stanisic BR, Verghese NK, Rutenbar RA, Carley LR, Allstot DJ (1994) Addressing substrate coupling in Mixed-mode ics - simulation and power distribution synthesis. IEEE J Solid-St Circ 29(3):226–238. doi:10.1109/4.278344
Uemura S, Hiraoka Y, Kai T, Dosho S (2012) Isolation techniques against substrate noise coupling utilizing through silicon via (TSV) process for RF/Mixed-signal SoCs. IEEE J Solid-State Circuits 47(4):810–816. doi:10.1109/JSSC.2012.2185169
Vargas F, (1994) Nicolaidis M SEU-tolerant SRAM design based on current monitoring. In: 24th Fault-Tolerant Computing Symp. FTCS-24. Digest of Papers., 15–17 Jun 1994. pp 106–115. doi:10.1109/ftcs.1994.315652
Velthuis JJ, Drasal Z, Hanninger G, Kohrs R, Mathes M, Reuen L, Scheirich D, Andricek L, Pascual IC, Chen X, Dolezal Z, Fischer P, Frey A, Fuster JA, Koch M, Kodys P, Kvasnicka P, Kruger H, Llacer CL, Lodomez P, Moser HG, Peric I, Raspereza A, Richter R, Rummel S, von Torne E, Wermes N (2008) A DEPFET based beam telescope with submicron precision capability. IEEE Trans Nucl Sci 55(1):662–666. doi:10.1109/TNS.2007.914031
Wolfel S, Herrmann S, Lechner P, Lutz G, Porro M, Richter RH, Struder L, Treis J (2007) A novel way of single optical photon detection: beating the 1/f noise limit with Ultra high resolution DEPFET-RNDR devices. IEEE Trans Nucl Sci 54(4):1311–1318. doi:10.1109/Tns.2007.901225
Zhichao Z, Tao W, Li C, Jinsheng Y A (2010) new Bulk Built-In Current Sensing circuit for single-event transient detection. In: Proc. 23rd Canadian Conference on Electrical and Computer Engineering (CCECE), 2–5 May 2010. pp 1–4. doi:10.1109/ccece.2010.5575124
Acknowledgments
This work has been supported by the Brazilian agencies Conselho Nacional de Desenvolvimento Científico e tecnológico (CNPq), Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES), and Fundação de Amparo à Pesquisa do Estado de Minas Gerais (FAPEMIG).
Author information
Authors and Affiliations
Corresponding author
Additional information
Responsible Editor: L. M. Bolzani Pöhls
Electronic Supplementary Material
ESM 1
(PDF 355 kb)
Rights and permissions
About this article
Cite this article
Melo, J.G.M., Sill Torres, F. Exploration of Noise Impact on Integrated Bulk Current Sensors. J Electron Test 32, 163–173 (2016). https://doi.org/10.1007/s10836-016-5579-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10836-016-5579-z