[go: up one dir, main page]
Skip to main content

Advertisement

Springer Nature Link
Log in

Experimental and modelling studies of carbon dioxide adsorption by porous biomass derived activated carbon

  • Original Paper
  • Published:
Clean Technologies and Environmental Policy Aims and scope Submit manuscript

Abstract

The goal of the study was to produce a low-cost activated carbon from agricultural residues via single stage carbon dioxide (CO2) activation and to investigate its applicability in capturing CO2 flue gas. The performance of the activated carbon was characterized in terms of the chemical composition, surface morphology as well as textural characteristics. The adsorption capacity was investigated at three temperatures of 25, 50 and 100 °C for different types of adsorbate, such as purified carbon dioxide and binary mixture of carbon dioxide and nitrogen. The purified CO2 adsorption study showed that the greatest adsorption capacity of the optimized activated carbon of 1.79 mmol g−1 was obtained at the lowest operating temperature. In addition, the adsorption study proved that the adsorption capacity for binary mixtures was lower due to the reduction in partial pressure. The experimental values of the purified CO2 adsorption were modelled by the Lagergren pseudo-first-order model, pseudo-second-order model, and intra-particle diffusion model. Based on the analysis, it inferred that the adsorption of CO2 followed the pseudo-second-order model with regression coefficient value higher than 0.995. In addition, the adsorption study was governed by both film diffusion and intra-particle diffusion. The activation energy that was lesser than 25 kJ mol−1 implied that physical adsorption (physisorption) occurred.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4

Similar content being viewed by others

References

  • Allen S, Whitten L, McKay G (1998) The production and characterisation of activated carbons: a review. Dev Chem Eng Miner Process 6:231–261

    Article  Google Scholar 

  • Ayoob S, Gupta AK, Bhakat PB, Bhat V (2008) Investigations on the kinetics and mechanisms of sorptive removal of fluoride from water using alumina cement granules. Chem Eng J 140:6–14

    Article  CAS  Google Scholar 

  • Basu S, Henshaw PF, Biswas N, Kwan HK (2002) Prediction of gas-phase adsorption isotherms using neural nets. Can J Chem Eng 80:1–7

    Article  Google Scholar 

  • Chouchene A, Jeguirim M, Trouvé G (2013) Biosorption performance, combustion behaviour, and leaching characteristics of olive solid waste during the removal of copper and nickel from aqueous solutions. Clean Technol Environ Policy. doi:10.1007/s10098-013-0680-9

    Google Scholar 

  • Dantas TL, Rodrigues AE, Moreira RF (2012) Separation of carbon dioxide from flue gas using adsorption on porous solids. In: Liu G (Ed) Greenhouse gases: capturing, utilization and reduction, InTech

  • Elkady MF, Ibrahim AM, El-Latif MMA (2011) Assessment of the adsorption kinetics, equilibrium and thermodynamic for the potential removal of reactive red dye using eggshell biocomposite beads. Desalin 278:412–423

    Article  CAS  Google Scholar 

  • Hamdan ME, Man N, Yassin SM, D’Silva JL, Shaffril HM (2013) Farmers’ adaptive capacity towards the impacts of global warming: a review. Asian Soc Sci 9:177–184

    Google Scholar 

  • Hileman B (2006) Climate change threatens global economy. Chem Eng News 84:7–8

    Google Scholar 

  • Ho YS, McKay G (1998) A comparison of chemisorption kinetic models applied to pollutant removal on various sorbents. Process Saf Environ Prot 76:332–340

    Article  CAS  Google Scholar 

  • Juttke V, Richter H, Voight I, Prasad RM, Bazarjani MS, Gurlo A, Riedel R (2013) Polymer derived ceramic membranes for gas separation. Chem Eng Trans 32:1891–1896

    Google Scholar 

  • Kaithwas A, Prasad M, Kulshreshtha A, Verma S (2012) Industrial wastes derived solid adsorbents for CO2 capture: a mini review. Chem Eng Res Des 90:1632–1641

    Article  CAS  Google Scholar 

  • Kangwanwatana W, Saiwan C, Tontiwachwuthikul P (2013) Study of CO2 adsorption using adsorbent modified with piperazine. Chem Eng Trans 35:403–408

    Google Scholar 

  • Khare P, Kumar A (2012) Removal of phenol from aqueous solution using carbonized Terminalia chebula-activated carbon: process parametric optimization using conventional method and Taguchi experimental design, adsorption kinetic, equilibrium and thermodynamic study. Appl Water Sci 2:317–326

    Article  CAS  Google Scholar 

  • Kurane I (2010) The effect of global warming on infectious diseases. Osong Public Health Res Perspect 1:4–9

    Article  Google Scholar 

  • Kwon S, Fan M, DaCosta HFM, Russell AG, Berchtold KA, Dubey MK (2011) CO2 sorption (Chap. 10). In: Bell DA, Towler BF, Fan M (eds) Coal gasification and its applications, 1st edn. William Andrew, Boston, pp 293–339

    Chapter  Google Scholar 

  • Li W, Zhang L, Peng J, Li N, Zhu X (2008) Preparation of high surface area activated carbons from tobacco stems with K2CO3 activation using microwave radiation. Ind Crop Prod 27:341–347

    Article  Google Scholar 

  • Linga P, Kumar R, Englezos P (2007) The clathrate hydrate process for post and pre-combustion capture of carbon dioxide. J Hazard Mater 149:625–629

    Article  CAS  Google Scholar 

  • Maroto-Valer MM, Tang Z, Zhang Y (2005) CO2 capture by activated and impregnated anthracites. Fuel Process Technol 86:1487–1502

    Article  CAS  Google Scholar 

  • Marx D, Joss L, Hefti M, Pini R, Mazzotti M (2013) The role of water in adsorption-based CO2 capture systems. Energy Proced 37:107–114

    Article  CAS  Google Scholar 

  • Meng L, Park S (2012) Investigation of narrow pore size distribution on carbon dioxide capture of nanoporous carbons. Bull Korean Chem Soc 33:3749–3754

    Article  CAS  Google Scholar 

  • Murshid G, Shariff AM, Keong LK, Bustam AM (2011) Thermo physical analysis of 2-amino-2-methyl-1-propanol solvent for carbon dioxide removal. Chem Eng Trans 25:45–50

    Google Scholar 

  • Özcan A, Öncü EM, Özcan AS (2006) Kinetics, isotherm and thermodynamic studies of adsorption of Acid Blue 193 from aqueous solutions onto natural sepiolite. Colloids Surf Physicochem Eng Asp 277:90–97

    Article  Google Scholar 

  • Plaza MG, González AS, Pevida C, Pis JJ, Rubiera F (2012) Valorisation of spent coffee grounds as CO2 adsorbents for postcombustion capture applications. Appl Energy 99:272–279

    Article  CAS  Google Scholar 

  • Purba E, Taharuddin T (2010) CO2 reduction and production of algal oil using microalgae Nannochloropsis oculata and Tetraselmis chuii. Chem Eng Trans 21:397–402

    Google Scholar 

  • Rashidi NA, Yusup S, Hameed BH (2013) Kinetic studies on carbon dioxide capture using lignocellulosic based activated carbon. Energy 61:440–446

    Article  CAS  Google Scholar 

  • Renugadevi N, Sangeetha, Lalitha P (2011) Kinetics of the adsorption of methylene blue from an industrial dyeing effluent onto activated carbon prepared from the fruits of Mimusops elengi. Arch Appl Sci Res 3:492–498

    CAS  Google Scholar 

  • Richards J (1995) Control of gaseous emissions: Student manual, APTI Course 415. North Carolina State University, Raleigh

    Google Scholar 

  • Sadaf S, Bhatti HN (2013) Evaluation of peanut husk as a novel, low cost biosorbent for the removal of Indosol Orange RSN dye from aqueous solutions: batch and fixed bed studies. Clean Technol Environ Policy. doi:10.1007/s10098-013-0653-z

    Google Scholar 

  • Saiwan C, Srisuwanvichein S, Tontiwachwuthikul P (2013) Biopolymer modified with piperazine-2-carboxylic acid for carbon dioxide adsorption. Chem Eng Trans 35:397–402

    Google Scholar 

  • Shih WH, Tejas P, Qiang Z (2003) Development of mesoporous membrane materials for CO2 separation. http://www.fischer-tropsch.org/DOE/DOE_reports/40823/40823-final/40823-final.pdf. Accessed 2 Dec 2013

  • Wang Y, Liu B, Zheng C (2010) Preparation and adsorption properties of corncob-derived activated carbon with high surface area. J Chem Eng Data 55:4669–4676

    Article  CAS  Google Scholar 

  • Wickramaratne NP, Jaroniec M (2013) Importance of small micropores in CO2 capture by phenolic resin-based activated carbon spheres. J Mater Chem A 1:112–116

    Article  CAS  Google Scholar 

  • Winters WJ, Dugan B, Collett TS (2008) Physical properties of sediments from Keathley Canyon and Atwater Valley, JIP Gulf of Mexico gas hydrate drilling program. Mar Pet Geol 25:896–905

    Article  CAS  Google Scholar 

  • Xu D, Zhang J, Li G, Xiao P, Webley P, Zhai YC (2011) Effect of water vapor from power station flue gas on CO2 capture by vacuum swing adsorption with activated carbon. J Fuel Chem Technol 39:169–174

    Article  Google Scholar 

  • Xu D, Xiao P, Zhang J, Li G, Xiao G, Webley PA, Zhai Y (2013) Effects of water vapour on CO2 capture with vacuum swing adsorption using activated carbon. Chem Eng J 230:64–72

    Article  CAS  Google Scholar 

Download references

Acknowledgments

The authors would like to acknowledge the Top-Down Nanotechnology Research Grant (NND/NA/(1)/TD11-036) under Ministry of Science, Technology and Innovation and Universiti Teknologi PETRONAS for both the financial and technical assistance.

Author information

Authors and Affiliations

  1. Biomass Processing Lab, Centre of Biofuel and Biochemical, Chemical Engineering Department, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, 31750, Tronoh, Perak, Malaysia

    Nor Adilla Rashidi, Suzana Yusup & Azry Borhan

  2. Department of Chemical and Environmental Engineering, Faculty of Engineering, University of Nottingham Malaysia Campus, Jalan Broga, 43500, Semenyih, Selangor Darul Ehsan, Malaysia

    Lam Hon Loong

Authors
  1. Nor Adilla Rashidi
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Suzana Yusup
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Azry Borhan
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Lam Hon Loong
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Suzana Yusup.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Rashidi, N.A., Yusup, S., Borhan, A. et al. Experimental and modelling studies of carbon dioxide adsorption by porous biomass derived activated carbon. Clean Techn Environ Policy 16, 1353–1361 (2014). https://doi.org/10.1007/s10098-014-0788-6

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10098-014-0788-6

Keywords