Abstract
Rock mass is frequently subjected to rapid cooling in many temperature-dependent engineering applications. In this paper, to understand the effects of water and liquid nitrogen cooling treatments on heated sandstone, P-wave velocity and uniaxial compression tests, Brazilian test, and fracture toughness tests were carried out to evaluate variations in physical and mechanical properties. The microscopic morphology of the thermally treated sandstone was also obtained by scanning electron microscopy (SEM). Test results reveal that the P-wave velocity, uniaxial compressive strength, Young’s modulus, tensile strength, and fracture toughness of the sandstone after heating and cooling treatment decrease continuously with increasing temperature. Compared to the water cooling treatment, the liquid nitrogen cooling treatment caused much more damage to the heated sandstone. The ductility of the thermally treated sandstone increased with increasing heating temperature, which was evidenced by the stress–strain response in uniaxial compression tests. The transition from shear-dominant fracturing to complex fracturing of the failure mode demonstrated that damage of sandstone induced by heating and cooling treatment increased with increasing temperature. Based on the SEM observation, the increase in heating temperature and cooling rate can weaken particle cementation and promote the generation and propagation of the micro-cracks in sandstone, and the generation of inter-granular cracks caused the reduction of tensile strength and fracture toughness of sandstone. In addition, the tensile stress caused by the thermal shock during rapid cooling treatment is the main reason of cracks growth in sandstone specimens, and the tensile stress is positively correlated with the temperature difference and the heat transfer coefficient.
Similar content being viewed by others
Explore related subjects
Find the latest articles, discoveries, and news in related topics.References
Breede K, Dzebisashvili K, Liu X, Falcone G (2013) A systematic review of enhanced (or engineered) geothermal systems: past, present and future. Geothermal Energy 1:1–27
Brotons V, Tomás R, Ivorra S, Grediaga A (2014) Relationship between static and dynamic elastic modulus of calcarenite heated at different temperatures: the san Julián’s stone. Bull Eng Geol Environ 73:791–799
Cai CZ, Li GS, Huang ZW et al (2014) Experimental study of the effect of liquid nitrogen cooling on rock pore structure. J Nat Gas Sci Eng 21:507–517
Collin M, Rowcliffe D (2000) Analysis and prediction of thermal shock in brittle materials. Acta Mater 48:1655–1665
Dincer I (1996) Determination of thermal diffusivities of cylindrical bodies being cooled. Int Commun Heat Mass Transf 23:713–720
Ericksen JL (2001) On the theory of the α–β phase transition in quartz. J Elastic Phys Sci Solids 63:61–86
Ersoy H, Kolaylı H, Karahan M, Harputlu Karahan H, Sünnetci MO (2017) Effect of thermal damage on mineralogical and strength properties of basic volcanic rocks exposed to high temperatures. Bull Eng Geol Environ 2017:1–11
Fan LF, Wu ZJ, Wan Z, Gao JW (2017) Experimental investigation of thermal effects on dynamic behavior of granite. Appl Therm Eng 125:94–103
Feng G, Kang Y, Meng T, Hu Y, Li X (2017) The influence of temperature on mode I fracture toughness and fracture characteristics of sandstone. Rock Mech Rock Eng 50:2007–2019
Franklin JA, Vogler UW, Szlavin J, Edmond JM, Bieniawski ZT (1981) Suggested methods for the determining water content, porosity, density, absorption and related properties and swelling and slake-durability index properties : part 1: suggested methods for determining water content, porosity, density, absorption and related properties. Int J Rock Mech Mining Sci Geomech Abstracts 16:143–151
Fu-bao Z, Bo-bo S, Jian-wei C, Ling-jun M (2015) A new approach to control a serious mine fire with using liquid nitrogen as extinguishing media. Fire Technol 51:325–334
Funatsu T, Seto M, Shimada H, Matsui K, Kuruppu M (2004) Combined effects of increasing temperature and confining pressure on the fracture toughness of clay bearing rocks. Int J Rock Mech Min Sci 41:927–938
Glover PWJ, Baud P, Darot M, Meredith PG, Boon SA, Leravalec M, Zoussi S, Reuschlé T (2010) α/β phase transition in quartz monitored using acoustic emissions. Geophys J R Astron Soc 120:775–782
Grundmann S R, Rodvelt G D, Dials G A, Allen R E (1998) Cryogenic nitrogen as a hydraulic fracturing fluid in the devonian shale. Paper presented at the SPE eastern regional meeting, Pittsburgh, Pennsylvania
Hartlieb P, Toifl M, Kuchar F, Meisels R, Antretter T (2016) Thermo-physical properties of selected hard rocks and their relation to microwave-assisted comminution. Miner Eng 91:34–41
Jamshidi A, Zamanian H, Zarei Sahamieh R (2018) The effect of density and porosity on the correlation between uniaxial compressive strength and P-wave velocity. Rock Mech Rock Eng 51:1279–1286
Jha MK, Verma AK, Maheshwar S, Chauhan A (2016) Study of temperature effect on thermal conductivity of Jhiri shale from upper Vindhyan, India. Bull Eng Geol Environ 75:1657–1668
Jones D (2000) Daedalus coal, air, fire and water. Nature 403:154–154
Kim AG (2004) Cryogenic injection to control a coal waste bank fire. Int J Coal Geol 59:63–73
Kim K, Kemeny J, Nickerson M (2014) Effect of rapid thermal cooling on mechanical rock properties. Rock Mech Rock Eng 47:2005–2019
Kumari WGP, Ranjith PG, Perera MSA, Chen BK, Abdulagatov IM (2017) Temperature-dependent mechanical behaviour of Australian Strathbogie granite with different cooling treatments. Eng Geol 229:31–44
Kuruppu MD, Obara Y, Ayatollahi MR et al (2014) ISRM-suggested method for determining the mode I static fracture toughness using semi-circular bend specimen. Rock Mech Rock Eng 47:267–274
Li R, Huang ZW, Wu XG (2018) Cryogenic quenching of rock using liquid nitrogen as a coolant: investigation of surface effects. Int J Heat Mass Transf 119:446–459
Liu QS, Qian ZC, Wu ZJ (2017) Micro/macro physical and mechanical variation of red sandstone subjected to cyclic heating and cooling: an experimental study. Bull Eng Geol Environ. https://doi.org/10.1007/s10064-017-1196-z
Liu S, Xu J (2015) An experimental study on the physico-mechanical properties of two post-high-temperature rocks. Eng Geol 185:63–70
Lü C, Sun Q, Zhang W, Geng J, Qi Y, Lu L (2017) The effect of high temperature on tensile strength of sandstone. Appl Therm Eng 111:573–579
Lu Y, Wang L, Sun X, Wang J (2017) Experimental study of the influence of water and temperature on the mechanical behavior of mudstone and sandstone. Bull Eng Geol Environ 76:645–660
Mahanta B, Singh TN, Ranjith PG (2016) Influence of thermal treatment on mode I fracture toughness of certain Indian rocks. Eng Geol 210:103–114
McDaniel BW, Grundmann SR, Kendrick WD, Wilson DR, Jordan SW (1997) Field applications of cryogenic nitrogen as a hydraulic fracturing fluid, SPE annual technical conference and exhibition. Society of Petroleum Engineers
McKnight REA, Moxon T, Buckley A, Taylor PA, Darling TW, Carpenter MA (2008) Grain size dependence of elastic anomalies accompanying the α–β phase transition in polycrystalline quartz. J Phys Condens Matter 20:075229
Meng Q, Zhang M, Han L, Pu H, Chen Y (2018) Experimental research on the influence of loading rate on the mechanical properties of limestone in a high-temperature state. Bull Eng Geol Environ. https://doi.org/10.1007/s10064-018-1332-4
Olasolo P, Juárez MC, Morales MP, Amico DS, Liarte IA (2016) Enhanced geothermal systems (EGS): a review. Renew Sust Energ Rev 56:133–144
Pappalardo G (2015) Correlation between P-wave velocity and physical–mechanical properties of intensely jointed Dolostones, Peloritani mounts, NE Sicily. Rock Mech Rock Eng 48:1711–1721
Peng J, Rong G, Cai M, Zhou C (2015) A model for characterizing crack closure effect of rocks. Eng Geol 189:48–57
Peng J, Rong G, Yao M, Wong LNY, Tang Z (2018) Acoustic emission characteristics of a fine-grained marble with different thermal damages and specimen sizes. Bull Eng Geol Environ. https://doi.org/10.1007/s10064-018-1375-6
Perkins G (2018) Underground coal gasification – part I: field demonstrations and process performance. Prog Energy Combust Sci 67:158–187
Qin L, Zhai C, Liu S, Xu J, Tang Z, Yu G (2016) Failure mechanism of coal after cryogenic freezing with cyclic liquid nitrogen and its influences on coalbed methane exploitation. Energy Fuel 30:8567–8578
Rathnaweera TD, Ranjith PG, Gu X, Perera MSA, Kumari WGP, Wanniarachchi WAM, Haque A, Li JC (2018) Experimental investigation of thermomechanical behaviour of clay-rich sandstone at extreme temperatures followed by cooling treatments. Int J Rock Mech Min Sci 107:208–223
Ray SK, Singh RP (2007) Recent developments and practices to control fire in Undergound coal mines. Fire Technol 43:285–300
Shao S, Wasantha PLP, Ranjith PG, Chen BK (2014) Effect of cooling rate on the mechanical behavior of heated Strathbogie granite with different grain sizes. Int J Rock Mech Min Sci 70:381–387
Shao Z, Jia X, Zhong X, Wang D, Wei J, Wang Y, Chen L (2018) Detection, extinguishing, and monitoring of a coal fire in Xinjiang, China. Environ Sci Pollut Res 25:26603–26616
Sharma PK, Singh TN (2008) A correlation between P-wave velocity, impact strength index, slake durability index and uniaxial compressive strength. Bull Eng Geol Environ 67:17–22
Shi B, Zhou G, Ma L (2018) Normalizing fire prevention technology and a ground Fixed Station for underground mine fires using liquid nitrogen: a case study. Fire Technol 54:1887–1893
Siratovich PA, Villeneuve MC, Cole JW, Kennedy BM, Bégué F (2015) Saturated heating and quenching of three crustal rocks and implications for thermal stimulation of permeability in geothermal reservoirs. Int J Rock Mech Min Sci 80:265–280
Sirdesai NN, Mahanta B, Ranjith PG, Singh TN (2017a) Effects of thermal treatment on physico-morphological properties of Indian fine-grained sandstone. Bull Eng Geol Environ. https://doi.org/10.1007/s10064-017-1149-6
Sirdesai NN, Singh TN, Ranjith PG, Singh R (2017b) Effect of varied durations of thermal treatment on the tensile strength of red sandstone. Rock Mech Rock Eng 50:205–213
Song Z, Kuenzer C (2014) Coal fires in China over the last decade: a comprehensive review. Int J Coal Geol 133:72–99
Sun H, Sun Q, Deng W, Zhang W, Lü C (2017) Temperature effect on microstructure and P-wave propagation in Linyi sandstone. Appl Therm Eng 115:913–922
Tester JW, Anderson BJ, Batchelor AS et al (2007) Impact of enhanced geothermal systems on US energy supply in the twenty-first century[J]. Philos Trans R Soc A Math Phys Eng Sci 365:1057–1094
Ulusay R (2015) The ISRM suggested methods for rock characterization, testing and monitoring: 2007–2014. Springer International Publishing, Cham, Switzerland
Wang P, Xu J, Fang X, Wen M, Zheng G, Wang P (2017) Dynamic splitting tensile behaviors of red-sandstone subjected to repeated thermal shocks: deterioration and micro-mechanism. Eng Geol 223:1–10
Wang P, Xu J, Liu S, Wang H, Liu S (2016) Static and dynamic mechanical properties of sedimentary rock after freeze-thaw or thermal shock weathering. Eng Geol 210:148–157
Wang P, Yin TB, Li X, Zhang S, Bai L (2018) Dynamic properties of thermally treated granite subjected to cyclic impact loading. Rock Mech Rock Eng 52:991–1010
Wu Q, Weng L, Zhao Y, Guo B, Luo T (2019) On the tensile mechanical characteristics of fine-grained granite after heating/cooling treatments with different cooling rates. Eng Geol 253:94–110
Wu X, Huang Z, Li R, Zhang S, Wen H, Huang P, Dai X, Zhang C (2018) Investigation on the damage of high-temperature shale subjected to liquid nitrogen cooling. J Nat Gas Sci Eng 57:284–294
Yin TB, Zhang SS, Li XB, Bai L (2018b) Evolution of dynamic mechanical properties of heated granite subjected to rapid cooling. Geomech Eng 16:483–493
Yin TB, Bai L, Li X, Li X, Zhang S (2018a) Effect of thermal treatment on the mode I fracture toughness of granite under dynamic and static coupling load. Eng Fract Mech 199:143–158
Yin TB, Zhang S, Li X, Bai L (2018c) A numerical estimate method of dynamic fracture initiation toughness of rock under high temperature. Eng Fract Mech 204:87–102
Zhang F, Zhao J, Hu D, Skoczylas F, Shao J (2018b) Laboratory investigation on physical and mechanical properties of granite after heating and water-cooling treatment. Rock Mech Rock Eng 51:677–694
Zhang H, Gao D, Salehi S, Guo B (2014) Effect of fluid temperature on rock failure in borehole drilling. J Eng Mech 140:82–90
Zhang S, Huang Z, Zhang H, Guo Z, Wu X, Wang T, Zhang C, Xiong C (2018a) Experimental study of thermal-crack characteristics on hot dry rock impacted by liquid nitrogen jet. Geothermics 76:253–260
Zhang W, Sun Q, Zhu S, Wang B (2017) Experimental study on mechanical and porous characteristics of limestone affected by high temperature. Appl Therm Eng 110:356–362
Zhao HB, Yin GZ, Xiao-Shuang LI (2010) Experimental study of characteristics of tensile burned gritstone. Rock Soil Mech 31:1143–1146+1275
Zhu D, Jing H, Yin Q, Han G (2018) Experimental study on the damage of granite by acoustic emission after cyclic heating and cooling with circulating water. Processes 6:101
Acknowledgements
This work was supported in part by the National Natural Science Foundation of China under Grant 51774325, the State Key Program of National Natural Science Foundation of China under Grant 41630642, and the State Key Research Development Program of China under Grant 2016YFC0600706.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, Q., Yin, T., Li, X. et al. Effects of rapid cooling treatment on heated sandstone: a comparison between water and liquid nitrogen cooling. Bull Eng Geol Environ 79, 313–327 (2020). https://doi.org/10.1007/s10064-019-01571-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10064-019-01571-6