Abstract
Some of the artificial intelligence (AI) methods could be used to improve the automation system performance in manufacturing processes. However, the implementation of these AI methods in the industry is rather slow, because of the high cost of the experiments with the conventional manufacturing and AI systems. To lower the experiment cost in this field, we have developed a special micromechanical equipment, similar to conventional mechanical equipment, but of much smaller size and therefore of lower cost. This equipment could be used for evaluation of different AI methods in an easy and inexpensive way. The proved methods could be transferred to the industry through appropriate scaling. In this paper we describe the prototypes of low cost microequipment for manufacturing processes and some AI method implementations to increase its precision, like computer vision systems based on neural networks for microdevice assembly, and genetic algorithms for microequipment characterization and microequipment precision increase.
Chapter PDF
Similar content being viewed by others
References
Eberhart, R.: Overview of computational intelligence [and biomedical engineering applications]. Proceedings od the 20-th Annual International Conference of the IEEE Engineering in Medicine and Biology Society 3 (1998) 1125–1129
Hui, T., Brown, D., Haynes, B., Xinxian Wang: Embedded e-diagnostic for distributed industrial machinery. IEEE International Symposium on Computational Intelligence for Measurement Systems and Applications (2003) 156–161
Awadallah, M., Morcos, M.: Application of AI tools in fault diagnosis of electrical machines and drives-an overview. IEEE Transactions on Energy Conversion 18, Issue 2 (2003) 245–251
Werbos, P.: Advanced Forecasting Methods for Global Crisis Warning and Models of Intelligence. In: General Systems Yearbook 22 (1977) 25–38
Prokhorov, D., Wunsch, D.: Adaptive Critic Designs. IEEE Trans. on Neural Networks 8, N 5 (1997) 997–1007
Xiaoou Li, Lara-Rosano, F.: A weighted fuzzy Petri net model for knowledge learning and reasoning. International Joint Conference on Neural Networks, IJCNN’ 99 4 2368–2372
Xiaoou Li, Wen Yu, Lara-Rosano, F.: DynamicKnowledge Inference and Learning under Adaptive Fuzzy Petri Net Framework. IEEE Transactions on Systems, Man, and Cybernetics 39, N4 (2000) 442–450
Bottou, L., Cortes, C., Denker, J., Drucker, H., Guyon L., Jackel L., LeCun J., Muller U., Sackinger E., Simard P., Vapnik V.: Comparison of Classifier Methods: a Case Study in Handwritten Digit Recognition. In: Proceedings of 12th IAPR InternationalConference on Pattern Recognition 2 (1994) 77–82
Fukushima, K. Neocognitron: A hierarchical neural network capable of visual pattern recognition. Neural Networks 1 (1988) 119–130
Roska, T., Rodriguez-Vazquez, A.: Toward visual microprocessors. Proceedings of the IEEE 90, Issue 7 (July 2002) 1244–1257
Baidyk, T.: Application of Flat Image Recognition Technique for Automation of Micro Device Production. Proceedings of the International Conference on Advanced Intelligent Mechatronics “AIM’01”, Italy
Baidyk, T., Kussul, E., Makeyev, O., Caballero, A., Ruiz, L., Carrera, G., Velasco, G.: Flat image recognition in the process of microdevice assembly. Pattern Recognition Letters 25/1 (2004) 107–118
Kussul, E.: Micromechanics and the perspectives of neurocomputing. In: Neuron-like Networks and Neurocomputers, Kiev, Ukraine (1993) 76–82 (in Russian)
Kussul, E., Rachkovskij, D., Baidyk, T., Talayev, S.: Micromechanical Engineering: a Basis for the Low-cost Manufacturing of Mechanical Microdevices Using Microequipment. Journal of Micromechanics and Microengineering 6 (1996) 410–425
Kussul, E., Baidyk, T., Ruiz-Huerta, L., Caballero, A., Velasco, G., Kasatkina, L.: Development of Micromachine Tool Prototypes for Microfactories. Journal of Micromechanics and Microengineering 12 (2002) 795–812
Wenxin Liu, Venayagamoorthy, G., Wunsch, D.: A heuristic dynamic programming based power system stabilizer for a turbogenerator in a single machine power system. 39th IAS Annual Meeting on Industry Applications 1 (2003) 270–276
Croce, F., Delfino, B., et al.: Operations and management of the electric system for industrial plants: an expert system prototype for load-shedding operator assistance. IEEE Transactions on Industry Applications 37, Issue 3 (2001) 701–708
Okazaki, Yu., Kitahara T.: Micro-Lathe Equipped with Closed-Loop Numerical Control. Proceedings of the 2-nd International Workshop on Microfactories, Switzerland (2000) 87–90
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2004 Springer Science + Business Media, Inc.
About this chapter
Cite this chapter
Lara-Rosano, F., Kussul, E., Baidyk, T., Ruiz, L., Caballero, A., Velasco, G. (2004). Artificial Intelligence Systems in Micromechanics. In: Bramer, M., Devedzic, V. (eds) Artificial Intelligence Applications and Innovations. AIAI 2004. IFIP International Federation for Information Processing, vol 154. Springer, Boston, MA. https://doi.org/10.1007/1-4020-8151-0_1
Download citation
DOI: https://doi.org/10.1007/1-4020-8151-0_1
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4020-8150-7
Online ISBN: 978-1-4020-8151-4
eBook Packages: Springer Book Archive