| 1 | /* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */ |
| 2 | /* |
| 3 | * The MIPI SDCA specification is available for public downloads at |
| 4 | * https://www.mipi.org/mipi-sdca-v1-0-download |
| 5 | * |
| 6 | * Copyright(c) 2024 Intel Corporation |
| 7 | */ |
| 8 | |
| 9 | #ifndef __SDCA_FUNCTION_H__ |
| 10 | #define __SDCA_FUNCTION_H__ |
| 11 | |
| 12 | #include <linux/bits.h> |
| 13 | #include <linux/types.h> |
| 14 | #include <linux/hid.h> |
| 15 | |
| 16 | struct acpi_table_swft; |
| 17 | struct device; |
| 18 | struct sdca_entity; |
| 19 | struct sdca_function_desc; |
| 20 | |
| 21 | #define SDCA_NO_INTERRUPT -1 |
| 22 | |
| 23 | /* |
| 24 | * The addressing space for SDCA relies on 7 bits for Entities, so a |
| 25 | * maximum of 128 Entities per function can be represented. |
| 26 | */ |
| 27 | #define SDCA_MAX_ENTITY_COUNT 128 |
| 28 | |
| 29 | /* |
| 30 | * Sanity check on number of initialization writes, can be expanded if needed. |
| 31 | */ |
| 32 | #define SDCA_MAX_INIT_COUNT 2048 |
| 33 | |
| 34 | /* |
| 35 | * The Cluster IDs are 16-bit, so a maximum of 65535 Clusters per |
| 36 | * function can be represented, however limit this to a slightly |
| 37 | * more reasonable value. Can be expanded if needed. |
| 38 | */ |
| 39 | #define SDCA_MAX_CLUSTER_COUNT 256 |
| 40 | |
| 41 | /* |
| 42 | * Sanity check on number of channels per Cluster, can be expanded if needed. |
| 43 | */ |
| 44 | #define SDCA_MAX_CHANNEL_COUNT 32 |
| 45 | |
| 46 | /* |
| 47 | * Sanity check on number of PDE delays, can be expanded if needed. |
| 48 | */ |
| 49 | #define SDCA_MAX_DELAY_COUNT 256 |
| 50 | |
| 51 | /* |
| 52 | * Sanity check on size of affected controls data, can be expanded if needed. |
| 53 | */ |
| 54 | #define SDCA_MAX_AFFECTED_COUNT 2048 |
| 55 | |
| 56 | /** |
| 57 | * enum sdca_function_type - SDCA Function Type codes |
| 58 | * @SDCA_FUNCTION_TYPE_SMART_AMP: Amplifier with protection features. |
| 59 | * @SDCA_FUNCTION_TYPE_SIMPLE_AMP: Subset of SmartAmp. |
| 60 | * @SDCA_FUNCTION_TYPE_SMART_MIC: Smart microphone with acoustic triggers. |
| 61 | * @SDCA_FUNCTION_TYPE_SIMPLE_MIC: Subset of SmartMic. |
| 62 | * @SDCA_FUNCTION_TYPE_SPEAKER_MIC: Combination of SmartMic and SmartAmp. |
| 63 | * @SDCA_FUNCTION_TYPE_UAJ: 3.5mm Universal Audio jack. |
| 64 | * @SDCA_FUNCTION_TYPE_RJ: Retaskable jack. |
| 65 | * @SDCA_FUNCTION_TYPE_SIMPLE_JACK: Subset of UAJ. |
| 66 | * @SDCA_FUNCTION_TYPE_HID: Human Interface Device, for e.g. buttons. |
| 67 | * @SDCA_FUNCTION_TYPE_COMPANION_AMP: Sources audio from another amp. |
| 68 | * @SDCA_FUNCTION_TYPE_IMP_DEF: Implementation-defined function. |
| 69 | * |
| 70 | * SDCA Function Types from SDCA specification v1.0a Section 5.1.2 |
| 71 | * all Function types not described are reserved. |
| 72 | * |
| 73 | * Note that SIMPLE_AMP, SIMPLE_MIC and SIMPLE_JACK Function Types |
| 74 | * are NOT defined in SDCA 1.0a, but they were defined in earlier |
| 75 | * drafts and are planned for 1.1. |
| 76 | */ |
| 77 | enum sdca_function_type { |
| 78 | SDCA_FUNCTION_TYPE_SMART_AMP = 0x01, |
| 79 | SDCA_FUNCTION_TYPE_SIMPLE_AMP = 0x02, |
| 80 | SDCA_FUNCTION_TYPE_SMART_MIC = 0x03, |
| 81 | SDCA_FUNCTION_TYPE_SIMPLE_MIC = 0x04, |
| 82 | SDCA_FUNCTION_TYPE_SPEAKER_MIC = 0x05, |
| 83 | SDCA_FUNCTION_TYPE_UAJ = 0x06, |
| 84 | SDCA_FUNCTION_TYPE_RJ = 0x07, |
| 85 | SDCA_FUNCTION_TYPE_SIMPLE_JACK = 0x08, |
| 86 | SDCA_FUNCTION_TYPE_HID = 0x0A, |
| 87 | SDCA_FUNCTION_TYPE_COMPANION_AMP = 0x0B, |
| 88 | SDCA_FUNCTION_TYPE_IMP_DEF = 0x1F, |
| 89 | }; |
| 90 | |
| 91 | /* Human-readable names used for kernel logs and Function device registration/bind */ |
| 92 | #define SDCA_FUNCTION_TYPE_SMART_AMP_NAME "SmartAmp" |
| 93 | #define SDCA_FUNCTION_TYPE_SIMPLE_AMP_NAME "SimpleAmp" |
| 94 | #define SDCA_FUNCTION_TYPE_SMART_MIC_NAME "SmartMic" |
| 95 | #define SDCA_FUNCTION_TYPE_SIMPLE_MIC_NAME "SimpleMic" |
| 96 | #define SDCA_FUNCTION_TYPE_SPEAKER_MIC_NAME "SpeakerMic" |
| 97 | #define SDCA_FUNCTION_TYPE_UAJ_NAME "UAJ" |
| 98 | #define SDCA_FUNCTION_TYPE_RJ_NAME "RJ" |
| 99 | #define SDCA_FUNCTION_TYPE_SIMPLE_NAME "SimpleJack" |
| 100 | #define SDCA_FUNCTION_TYPE_HID_NAME "HID" |
| 101 | #define SDCA_FUNCTION_TYPE_COMPANION_AMP_NAME "CompanionAmp" |
| 102 | #define SDCA_FUNCTION_TYPE_IMP_DEF_NAME "ImplementationDefined" |
| 103 | |
| 104 | /** |
| 105 | * struct sdca_init_write - a single initialization write |
| 106 | * @addr: Register address to be written |
| 107 | * @val: Single byte value to be written |
| 108 | */ |
| 109 | struct sdca_init_write { |
| 110 | u32 addr; |
| 111 | u8 val; |
| 112 | }; |
| 113 | |
| 114 | /** |
| 115 | * define SDCA_CTL_TYPE - create a unique identifier for an SDCA Control |
| 116 | * @ent: Entity Type code. |
| 117 | * @sel: Control Selector code. |
| 118 | * |
| 119 | * Sometimes there is a need to identify a type of Control, for example to |
| 120 | * determine what name the control should have. SDCA Selectors are reused |
| 121 | * across Entity types, as such it is necessary to combine both the Entity |
| 122 | * Type and the Control Selector to obtain a unique identifier. |
| 123 | */ |
| 124 | #define SDCA_CTL_TYPE(ent, sel) ((ent) << 8 | (sel)) |
| 125 | |
| 126 | /** |
| 127 | * define SDCA_CTL_TYPE_S - static version of SDCA_CTL_TYPE |
| 128 | * @ent: Entity name, for example IT, MFPU, etc. this string can be read |
| 129 | * from the last characters of the SDCA_ENTITY_TYPE_* macros. |
| 130 | * @sel: Control Selector name, for example MIC_BIAS, MUTE, etc. this |
| 131 | * string can be read from the last characters of the SDCA_CTL_*_* |
| 132 | * macros. |
| 133 | * |
| 134 | * Short hand to specific a Control type statically for example: |
| 135 | * SDCA_CTL_TYPE_S(IT, MIC_BIAS). |
| 136 | */ |
| 137 | #define SDCA_CTL_TYPE_S(ent, sel) SDCA_CTL_TYPE(SDCA_ENTITY_TYPE_##ent, \ |
| 138 | SDCA_CTL_##ent##_##sel) |
| 139 | |
| 140 | /** |
| 141 | * enum sdca_messageoffset_range - Column definitions UMP MessageOffset |
| 142 | */ |
| 143 | enum sdca_messageoffset_range { |
| 144 | SDCA_MESSAGEOFFSET_BUFFER_START_ADDRESS = 0, |
| 145 | SDCA_MESSAGEOFFSET_BUFFER_LENGTH = 1, |
| 146 | SDCA_MESSAGEOFFSET_UMP_MODE = 2, |
| 147 | SDCA_MESSAGEOFFSET_NCOLS = 3, |
| 148 | }; |
| 149 | |
| 150 | /** |
| 151 | * enum sdca_ump_mode - SDCA UMP Mode |
| 152 | */ |
| 153 | enum sdca_ump_mode { |
| 154 | SDCA_UMP_MODE_DIRECT = 0x00, |
| 155 | SDCA_UMP_MODE_INDIRECT = 0x01, |
| 156 | }; |
| 157 | |
| 158 | /** |
| 159 | * enum sdca_ump_owner - SDCA UMP Owner |
| 160 | */ |
| 161 | enum sdca_ump_owner { |
| 162 | SDCA_UMP_OWNER_HOST = 0x00, |
| 163 | SDCA_UMP_OWNER_DEVICE = 0x01, |
| 164 | }; |
| 165 | |
| 166 | /** |
| 167 | * enum sdca_it_controls - SDCA Controls for Input Terminal |
| 168 | * |
| 169 | * Control Selectors for Input Terminal from SDCA specification v1.0 |
| 170 | * section 6.2.1.3. |
| 171 | */ |
| 172 | enum sdca_it_controls { |
| 173 | SDCA_CTL_IT_MIC_BIAS = 0x03, |
| 174 | SDCA_CTL_IT_USAGE = 0x04, |
| 175 | SDCA_CTL_IT_LATENCY = 0x08, |
| 176 | SDCA_CTL_IT_CLUSTERINDEX = 0x10, |
| 177 | SDCA_CTL_IT_DATAPORT_SELECTOR = 0x11, |
| 178 | SDCA_CTL_IT_MATCHING_GUID = 0x12, |
| 179 | SDCA_CTL_IT_KEEP_ALIVE = 0x13, |
| 180 | SDCA_CTL_IT_NDAI_STREAM = 0x14, |
| 181 | SDCA_CTL_IT_NDAI_CATEGORY = 0x15, |
| 182 | SDCA_CTL_IT_NDAI_CODINGTYPE = 0x16, |
| 183 | SDCA_CTL_IT_NDAI_PACKETTYPE = 0x17, |
| 184 | }; |
| 185 | |
| 186 | /** |
| 187 | * enum sdca_ot_controls - SDCA Controls for Output Terminal |
| 188 | * |
| 189 | * Control Selectors for Output Terminal from SDCA specification v1.0 |
| 190 | * section 6.2.2.3. |
| 191 | */ |
| 192 | enum sdca_ot_controls { |
| 193 | SDCA_CTL_OT_USAGE = 0x04, |
| 194 | SDCA_CTL_OT_LATENCY = 0x08, |
| 195 | SDCA_CTL_OT_DATAPORT_SELECTOR = 0x11, |
| 196 | SDCA_CTL_OT_MATCHING_GUID = 0x12, |
| 197 | SDCA_CTL_OT_KEEP_ALIVE = 0x13, |
| 198 | SDCA_CTL_OT_NDAI_STREAM = 0x14, |
| 199 | SDCA_CTL_OT_NDAI_CATEGORY = 0x15, |
| 200 | SDCA_CTL_OT_NDAI_CODINGTYPE = 0x16, |
| 201 | SDCA_CTL_OT_NDAI_PACKETTYPE = 0x17, |
| 202 | }; |
| 203 | |
| 204 | /** |
| 205 | * enum sdca_usage_range - Column definitions for Usage |
| 206 | */ |
| 207 | enum sdca_usage_range { |
| 208 | SDCA_USAGE_NUMBER = 0, |
| 209 | SDCA_USAGE_CBN = 1, |
| 210 | SDCA_USAGE_SAMPLE_RATE = 2, |
| 211 | SDCA_USAGE_SAMPLE_WIDTH = 3, |
| 212 | SDCA_USAGE_FULL_SCALE = 4, |
| 213 | SDCA_USAGE_NOISE_FLOOR = 5, |
| 214 | SDCA_USAGE_TAG = 6, |
| 215 | SDCA_USAGE_NCOLS = 7, |
| 216 | }; |
| 217 | |
| 218 | /** |
| 219 | * enum sdca_dataport_selector_range - Column definitions for DataPort_Selector |
| 220 | */ |
| 221 | enum sdca_dataport_selector_range { |
| 222 | SDCA_DATAPORT_SELECTOR_NCOLS = 16, |
| 223 | SDCA_DATAPORT_SELECTOR_NROWS = 4, |
| 224 | }; |
| 225 | |
| 226 | /** |
| 227 | * enum sdca_mu_controls - SDCA Controls for Mixer Unit |
| 228 | * |
| 229 | * Control Selectors for Mixer Unit from SDCA specification v1.0 |
| 230 | * section 6.3.4.2. |
| 231 | */ |
| 232 | enum sdca_mu_controls { |
| 233 | SDCA_CTL_MU_MIXER = 0x01, |
| 234 | SDCA_CTL_MU_LATENCY = 0x06, |
| 235 | }; |
| 236 | |
| 237 | /** |
| 238 | * enum sdca_su_controls - SDCA Controls for Selector Unit |
| 239 | * |
| 240 | * Control Selectors for Selector Unit from SDCA specification v1.0 |
| 241 | * section 6.3.8.3. |
| 242 | */ |
| 243 | enum sdca_su_controls { |
| 244 | SDCA_CTL_SU_SELECTOR = 0x01, |
| 245 | SDCA_CTL_SU_LATENCY = 0x02, |
| 246 | }; |
| 247 | |
| 248 | /** |
| 249 | * enum sdca_fu_controls - SDCA Controls for Feature Unit |
| 250 | * |
| 251 | * Control Selectors for Feature Unit from SDCA specification v1.0 |
| 252 | * section 6.3.2.3. |
| 253 | */ |
| 254 | enum sdca_fu_controls { |
| 255 | SDCA_CTL_FU_MUTE = 0x01, |
| 256 | SDCA_CTL_FU_CHANNEL_VOLUME = 0x02, |
| 257 | SDCA_CTL_FU_AGC = 0x07, |
| 258 | SDCA_CTL_FU_BASS_BOOST = 0x09, |
| 259 | SDCA_CTL_FU_LOUDNESS = 0x0A, |
| 260 | SDCA_CTL_FU_GAIN = 0x0B, |
| 261 | SDCA_CTL_FU_LATENCY = 0x10, |
| 262 | }; |
| 263 | |
| 264 | /** |
| 265 | * enum sdca_volume_range - Column definitions for Q7.8dB volumes/gains |
| 266 | */ |
| 267 | enum sdca_volume_range { |
| 268 | SDCA_VOLUME_LINEAR_MIN = 0, |
| 269 | SDCA_VOLUME_LINEAR_MAX = 1, |
| 270 | SDCA_VOLUME_LINEAR_STEP = 2, |
| 271 | SDCA_VOLUME_LINEAR_NCOLS = 3, |
| 272 | }; |
| 273 | |
| 274 | /** |
| 275 | * enum sdca_xu_controls - SDCA Controls for Extension Unit |
| 276 | * |
| 277 | * Control Selectors for Extension Unit from SDCA specification v1.0 |
| 278 | * section 6.3.10.3. |
| 279 | */ |
| 280 | enum sdca_xu_controls { |
| 281 | SDCA_CTL_XU_BYPASS = 0x01, |
| 282 | SDCA_CTL_XU_LATENCY = 0x06, |
| 283 | SDCA_CTL_XU_XU_ID = 0x07, |
| 284 | SDCA_CTL_XU_XU_VERSION = 0x08, |
| 285 | SDCA_CTL_XU_FDL_CURRENTOWNER = 0x10, |
| 286 | SDCA_CTL_XU_FDL_MESSAGEOFFSET = 0x12, |
| 287 | SDCA_CTL_XU_FDL_MESSAGELENGTH = 0x13, |
| 288 | SDCA_CTL_XU_FDL_STATUS = 0x14, |
| 289 | SDCA_CTL_XU_FDL_SET_INDEX = 0x15, |
| 290 | SDCA_CTL_XU_FDL_HOST_REQUEST = 0x16, |
| 291 | |
| 292 | /* FDL Status Host->Device bit definitions */ |
| 293 | SDCA_CTL_XU_FDLH_TRANSFERRED_CHUNK = BIT(0), |
| 294 | SDCA_CTL_XU_FDLH_TRANSFERRED_FILE = BIT(1), |
| 295 | SDCA_CTL_XU_FDLH_SET_IN_PROGRESS = BIT(2), |
| 296 | SDCA_CTL_XU_FDLH_RESET_ACK = BIT(4), |
| 297 | SDCA_CTL_XU_FDLH_REQ_ABORT = BIT(5), |
| 298 | /* FDL Status Device->Host bit definitions */ |
| 299 | SDCA_CTL_XU_FDLD_REQ_RESET = BIT(4), |
| 300 | SDCA_CTL_XU_FDLD_REQ_ABORT = BIT(5), |
| 301 | SDCA_CTL_XU_FDLD_ACK_TRANSFER = BIT(6), |
| 302 | SDCA_CTL_XU_FDLD_NEEDS_SET = BIT(7), |
| 303 | }; |
| 304 | |
| 305 | /** |
| 306 | * enum sdca_set_index_range - Column definitions UMP SetIndex |
| 307 | */ |
| 308 | enum sdca_fdl_set_index_range { |
| 309 | SDCA_FDL_SET_INDEX_SET_NUMBER = 0, |
| 310 | SDCA_FDL_SET_INDEX_FILE_SET_ID = 1, |
| 311 | SDCA_FDL_SET_INDEX_NCOLS = 2, |
| 312 | }; |
| 313 | |
| 314 | /** |
| 315 | * enum sdca_cs_controls - SDCA Controls for Clock Source |
| 316 | * |
| 317 | * Control Selectors for Clock Source from SDCA specification v1.0 |
| 318 | * section 6.4.1.3. |
| 319 | */ |
| 320 | enum sdca_cs_controls { |
| 321 | SDCA_CTL_CS_CLOCK_VALID = 0x02, |
| 322 | SDCA_CTL_CS_SAMPLERATEINDEX = 0x10, |
| 323 | }; |
| 324 | |
| 325 | /** |
| 326 | * enum sdca_samplerateindex_range - Column definitions for SampleRateIndex |
| 327 | */ |
| 328 | enum sdca_samplerateindex_range { |
| 329 | SDCA_SAMPLERATEINDEX_INDEX = 0, |
| 330 | SDCA_SAMPLERATEINDEX_RATE = 1, |
| 331 | SDCA_SAMPLERATEINDEX_NCOLS = 2, |
| 332 | }; |
| 333 | |
| 334 | /** |
| 335 | * enum sdca_cx_controls - SDCA Controls for Clock Selector |
| 336 | * |
| 337 | * Control Selectors for Clock Selector from SDCA specification v1.0 |
| 338 | * section 6.4.2.3. |
| 339 | */ |
| 340 | enum sdca_cx_controls { |
| 341 | SDCA_CTL_CX_CLOCK_SELECT = 0x01, |
| 342 | }; |
| 343 | |
| 344 | /** |
| 345 | * enum sdca_pde_controls - SDCA Controls for Power Domain Entity |
| 346 | * |
| 347 | * Control Selectors for Power Domain Entity from SDCA specification |
| 348 | * v1.0 section 6.5.2.2. |
| 349 | */ |
| 350 | enum sdca_pde_controls { |
| 351 | SDCA_CTL_PDE_REQUESTED_PS = 0x01, |
| 352 | SDCA_CTL_PDE_ACTUAL_PS = 0x10, |
| 353 | }; |
| 354 | |
| 355 | /** |
| 356 | * enum sdca_requested_ps_range - Column definitions for Requested PS |
| 357 | */ |
| 358 | enum sdca_requested_ps_range { |
| 359 | SDCA_REQUESTED_PS_STATE = 0, |
| 360 | SDCA_REQUESTED_PS_NCOLS = 1, |
| 361 | }; |
| 362 | |
| 363 | /** |
| 364 | * enum sdca_ge_controls - SDCA Controls for Group Unit |
| 365 | * |
| 366 | * Control Selectors for Group Unit from SDCA specification v1.0 |
| 367 | * section 6.5.1.4. |
| 368 | */ |
| 369 | enum sdca_ge_controls { |
| 370 | SDCA_CTL_GE_SELECTED_MODE = 0x01, |
| 371 | SDCA_CTL_GE_DETECTED_MODE = 0x02, |
| 372 | }; |
| 373 | |
| 374 | /** |
| 375 | * enum sdca_selected_mode_range - Column definitions for Selected Mode |
| 376 | */ |
| 377 | enum sdca_selected_mode_range { |
| 378 | SDCA_SELECTED_MODE_INDEX = 0, |
| 379 | SDCA_SELECTED_MODE_TERM_TYPE = 1, |
| 380 | SDCA_SELECTED_MODE_NCOLS = 2, |
| 381 | }; |
| 382 | |
| 383 | /** |
| 384 | * enum sdca_detected_mode_values - Predefined GE Detected Mode values |
| 385 | */ |
| 386 | enum sdca_detected_mode_values { |
| 387 | SDCA_DETECTED_MODE_JACK_UNPLUGGED = 0, |
| 388 | SDCA_DETECTED_MODE_JACK_UNKNOWN = 1, |
| 389 | SDCA_DETECTED_MODE_DETECTION_IN_PROGRESS = 2, |
| 390 | }; |
| 391 | |
| 392 | /** |
| 393 | * enum sdca_spe_controls - SDCA Controls for Security & Privacy Unit |
| 394 | * |
| 395 | * Control Selectors for Security & Privacy Unit from SDCA |
| 396 | * specification v1.0 Section 6.5.3.2. |
| 397 | */ |
| 398 | enum sdca_spe_controls { |
| 399 | SDCA_CTL_SPE_PRIVATE = 0x01, |
| 400 | SDCA_CTL_SPE_PRIVACY_POLICY = 0x02, |
| 401 | SDCA_CTL_SPE_PRIVACY_LOCKSTATE = 0x03, |
| 402 | SDCA_CTL_SPE_PRIVACY_OWNER = 0x04, |
| 403 | SDCA_CTL_SPE_AUTHTX_CURRENTOWNER = 0x10, |
| 404 | SDCA_CTL_SPE_AUTHTX_MESSAGEOFFSET = 0x12, |
| 405 | SDCA_CTL_SPE_AUTHTX_MESSAGELENGTH = 0x13, |
| 406 | SDCA_CTL_SPE_AUTHRX_CURRENTOWNER = 0x14, |
| 407 | SDCA_CTL_SPE_AUTHRX_MESSAGEOFFSET = 0x16, |
| 408 | SDCA_CTL_SPE_AUTHRX_MESSAGELENGTH = 0x17, |
| 409 | }; |
| 410 | |
| 411 | /** |
| 412 | * enum sdca_cru_controls - SDCA Controls for Channel Remapping Unit |
| 413 | * |
| 414 | * Control Selectors for Channel Remapping Unit from SDCA |
| 415 | * specification v1.0 Section 6.3.1.3. |
| 416 | */ |
| 417 | enum sdca_cru_controls { |
| 418 | SDCA_CTL_CRU_LATENCY = 0x06, |
| 419 | SDCA_CTL_CRU_CLUSTERINDEX = 0x10, |
| 420 | }; |
| 421 | |
| 422 | /** |
| 423 | * enum sdca_udmpu_controls - SDCA Controls for Up-Down Mixer Processing Unit |
| 424 | * |
| 425 | * Control Selectors for Up-Down Mixer Processing Unit from SDCA |
| 426 | * specification v1.0 Section 6.3.9.3. |
| 427 | */ |
| 428 | enum sdca_udmpu_controls { |
| 429 | SDCA_CTL_UDMPU_LATENCY = 0x06, |
| 430 | SDCA_CTL_UDMPU_CLUSTERINDEX = 0x10, |
| 431 | SDCA_CTL_UDMPU_ACOUSTIC_ENERGY_LEVEL_MONITOR = 0x11, |
| 432 | SDCA_CTL_UDMPU_ULTRASOUND_LOOP_GAIN = 0x12, |
| 433 | SDCA_CTL_UDMPU_OPAQUESET_0 = 0x18, |
| 434 | SDCA_CTL_UDMPU_OPAQUESET_1 = 0x19, |
| 435 | SDCA_CTL_UDMPU_OPAQUESET_2 = 0x1A, |
| 436 | SDCA_CTL_UDMPU_OPAQUESET_3 = 0x1B, |
| 437 | SDCA_CTL_UDMPU_OPAQUESET_4 = 0x1C, |
| 438 | SDCA_CTL_UDMPU_OPAQUESET_5 = 0x1D, |
| 439 | SDCA_CTL_UDMPU_OPAQUESET_6 = 0x1E, |
| 440 | SDCA_CTL_UDMPU_OPAQUESET_7 = 0x1F, |
| 441 | SDCA_CTL_UDMPU_OPAQUESET_8 = 0x20, |
| 442 | SDCA_CTL_UDMPU_OPAQUESET_9 = 0x21, |
| 443 | SDCA_CTL_UDMPU_OPAQUESET_10 = 0x22, |
| 444 | SDCA_CTL_UDMPU_OPAQUESET_11 = 0x23, |
| 445 | SDCA_CTL_UDMPU_OPAQUESET_12 = 0x24, |
| 446 | SDCA_CTL_UDMPU_OPAQUESET_13 = 0x25, |
| 447 | SDCA_CTL_UDMPU_OPAQUESET_14 = 0x26, |
| 448 | SDCA_CTL_UDMPU_OPAQUESET_15 = 0x27, |
| 449 | SDCA_CTL_UDMPU_OPAQUESET_16 = 0x28, |
| 450 | SDCA_CTL_UDMPU_OPAQUESET_17 = 0x29, |
| 451 | SDCA_CTL_UDMPU_OPAQUESET_18 = 0x2A, |
| 452 | SDCA_CTL_UDMPU_OPAQUESET_19 = 0x2B, |
| 453 | SDCA_CTL_UDMPU_OPAQUESET_20 = 0x2C, |
| 454 | SDCA_CTL_UDMPU_OPAQUESET_21 = 0x2D, |
| 455 | SDCA_CTL_UDMPU_OPAQUESET_22 = 0x2E, |
| 456 | SDCA_CTL_UDMPU_OPAQUESET_23 = 0x2F, |
| 457 | }; |
| 458 | |
| 459 | /** |
| 460 | * enum sdca_mfpu_controls - SDCA Controls for Multi-Function Processing Unit |
| 461 | * |
| 462 | * Control Selectors for Multi-Function Processing Unit from SDCA |
| 463 | * specification v1.0 Section 6.3.3.4. |
| 464 | */ |
| 465 | enum sdca_mfpu_controls { |
| 466 | SDCA_CTL_MFPU_BYPASS = 0x01, |
| 467 | SDCA_CTL_MFPU_ALGORITHM_READY = 0x04, |
| 468 | SDCA_CTL_MFPU_ALGORITHM_ENABLE = 0x05, |
| 469 | SDCA_CTL_MFPU_LATENCY = 0x08, |
| 470 | SDCA_CTL_MFPU_ALGORITHM_PREPARE = 0x09, |
| 471 | SDCA_CTL_MFPU_CLUSTERINDEX = 0x10, |
| 472 | SDCA_CTL_MFPU_CENTER_FREQUENCY_INDEX = 0x11, |
| 473 | SDCA_CTL_MFPU_ULTRASOUND_LEVEL = 0x12, |
| 474 | SDCA_CTL_MFPU_AE_NUMBER = 0x13, |
| 475 | SDCA_CTL_MFPU_AE_CURRENTOWNER = 0x14, |
| 476 | SDCA_CTL_MFPU_AE_MESSAGEOFFSET = 0x16, |
| 477 | SDCA_CTL_MFPU_AE_MESSAGELENGTH = 0x17, |
| 478 | }; |
| 479 | |
| 480 | /** |
| 481 | * enum sdca_smpu_controls - SDCA Controls for Smart Mic Processing Unit |
| 482 | * |
| 483 | * Control Selectors for Smart Mic Processing Unit from SDCA |
| 484 | * specification v1.0 Section 6.3.7.3. |
| 485 | */ |
| 486 | enum sdca_smpu_controls { |
| 487 | SDCA_CTL_SMPU_LATENCY = 0x06, |
| 488 | SDCA_CTL_SMPU_TRIGGER_ENABLE = 0x10, |
| 489 | SDCA_CTL_SMPU_TRIGGER_STATUS = 0x11, |
| 490 | SDCA_CTL_SMPU_HIST_BUFFER_MODE = 0x12, |
| 491 | SDCA_CTL_SMPU_HIST_BUFFER_PREAMBLE = 0x13, |
| 492 | SDCA_CTL_SMPU_HIST_ERROR = 0x14, |
| 493 | SDCA_CTL_SMPU_TRIGGER_EXTENSION = 0x15, |
| 494 | SDCA_CTL_SMPU_TRIGGER_READY = 0x16, |
| 495 | SDCA_CTL_SMPU_HIST_CURRENTOWNER = 0x18, |
| 496 | SDCA_CTL_SMPU_HIST_MESSAGEOFFSET = 0x1A, |
| 497 | SDCA_CTL_SMPU_HIST_MESSAGELENGTH = 0x1B, |
| 498 | SDCA_CTL_SMPU_DTODTX_CURRENTOWNER = 0x1C, |
| 499 | SDCA_CTL_SMPU_DTODTX_MESSAGEOFFSET = 0x1E, |
| 500 | SDCA_CTL_SMPU_DTODTX_MESSAGELENGTH = 0x1F, |
| 501 | SDCA_CTL_SMPU_DTODRX_CURRENTOWNER = 0x20, |
| 502 | SDCA_CTL_SMPU_DTODRX_MESSAGEOFFSET = 0x22, |
| 503 | SDCA_CTL_SMPU_DTODRX_MESSAGELENGTH = 0x23, |
| 504 | }; |
| 505 | |
| 506 | /** |
| 507 | * enum sdca_sapu_controls - SDCA Controls for Smart Amp Processing Unit |
| 508 | * |
| 509 | * Control Selectors for Smart Amp Processing Unit from SDCA |
| 510 | * specification v1.0 Section 6.3.6.3. |
| 511 | */ |
| 512 | enum sdca_sapu_controls { |
| 513 | SDCA_CTL_SAPU_LATENCY = 0x05, |
| 514 | SDCA_CTL_SAPU_PROTECTION_MODE = 0x10, |
| 515 | SDCA_CTL_SAPU_PROTECTION_STATUS = 0x11, |
| 516 | SDCA_CTL_SAPU_OPAQUESETREQ_INDEX = 0x12, |
| 517 | SDCA_CTL_SAPU_DTODTX_CURRENTOWNER = 0x14, |
| 518 | SDCA_CTL_SAPU_DTODTX_MESSAGEOFFSET = 0x16, |
| 519 | SDCA_CTL_SAPU_DTODTX_MESSAGELENGTH = 0x17, |
| 520 | SDCA_CTL_SAPU_DTODRX_CURRENTOWNER = 0x18, |
| 521 | SDCA_CTL_SAPU_DTODRX_MESSAGEOFFSET = 0x1A, |
| 522 | SDCA_CTL_SAPU_DTODRX_MESSAGELENGTH = 0x1B, |
| 523 | }; |
| 524 | |
| 525 | /** |
| 526 | * enum sdca_ppu_controls - SDCA Controls for Post Processing Unit |
| 527 | * |
| 528 | * Control Selectors for Post Processing Unit from SDCA specification |
| 529 | * v1.0 Section 6.3.5.3. |
| 530 | */ |
| 531 | enum sdca_ppu_controls { |
| 532 | SDCA_CTL_PPU_LATENCY = 0x06, |
| 533 | SDCA_CTL_PPU_POSTURENUMBER = 0x10, |
| 534 | SDCA_CTL_PPU_POSTUREEXTENSION = 0x11, |
| 535 | SDCA_CTL_PPU_HORIZONTALBALANCE = 0x12, |
| 536 | SDCA_CTL_PPU_VERTICALBALANCE = 0x13, |
| 537 | }; |
| 538 | |
| 539 | /** |
| 540 | * enum sdca_tg_controls - SDCA Controls for Tone Generator Entity |
| 541 | * |
| 542 | * Control Selectors for Tone Generator from SDCA specification v1.0 |
| 543 | * Section 6.5.4.4. |
| 544 | */ |
| 545 | enum sdca_tg_controls { |
| 546 | SDCA_CTL_TG_TONE_DIVIDER = 0x10, |
| 547 | }; |
| 548 | |
| 549 | /** |
| 550 | * enum sdca_hide_controls - SDCA Controls for HIDE Entity |
| 551 | * |
| 552 | * Control Selectors for HIDE from SDCA specification v1.0 Section |
| 553 | * 6.6.1.2. |
| 554 | */ |
| 555 | enum sdca_hide_controls { |
| 556 | SDCA_CTL_HIDE_HIDTX_CURRENTOWNER = 0x10, |
| 557 | SDCA_CTL_HIDE_HIDTX_MESSAGEOFFSET = 0x12, |
| 558 | SDCA_CTL_HIDE_HIDTX_MESSAGELENGTH = 0x13, |
| 559 | SDCA_CTL_HIDE_HIDRX_CURRENTOWNER = 0x14, |
| 560 | SDCA_CTL_HIDE_HIDRX_MESSAGEOFFSET = 0x16, |
| 561 | SDCA_CTL_HIDE_HIDRX_MESSAGELENGTH = 0x17, |
| 562 | }; |
| 563 | |
| 564 | /** |
| 565 | * enum sdca_entity0_controls - SDCA Controls for Entity 0 |
| 566 | * |
| 567 | * Control Selectors for Entity 0 from SDCA specification v1.0 Section |
| 568 | * 6.7.1.1. |
| 569 | */ |
| 570 | enum sdca_entity0_controls { |
| 571 | SDCA_CTL_ENTITY_0_COMMIT_GROUP_MASK = 0x01, |
| 572 | SDCA_CTL_ENTITY_0_FUNCTION_SDCA_VERSION = 0x04, |
| 573 | SDCA_CTL_ENTITY_0_FUNCTION_TYPE = 0x05, |
| 574 | SDCA_CTL_ENTITY_0_FUNCTION_MANUFACTURER_ID = 0x06, |
| 575 | SDCA_CTL_ENTITY_0_FUNCTION_ID = 0x07, |
| 576 | SDCA_CTL_ENTITY_0_FUNCTION_VERSION = 0x08, |
| 577 | SDCA_CTL_ENTITY_0_FUNCTION_EXTENSION_ID = 0x09, |
| 578 | SDCA_CTL_ENTITY_0_FUNCTION_EXTENSION_VERSION = 0x0A, |
| 579 | SDCA_CTL_ENTITY_0_FUNCTION_STATUS = 0x10, |
| 580 | SDCA_CTL_ENTITY_0_FUNCTION_ACTION = 0x11, |
| 581 | SDCA_CTL_ENTITY_0_MATCHING_GUID = 0x12, |
| 582 | SDCA_CTL_ENTITY_0_DEVICE_MANUFACTURER_ID = 0x2C, |
| 583 | SDCA_CTL_ENTITY_0_DEVICE_PART_ID = 0x2D, |
| 584 | SDCA_CTL_ENTITY_0_DEVICE_VERSION = 0x2E, |
| 585 | SDCA_CTL_ENTITY_0_DEVICE_SDCA_VERSION = 0x2F, |
| 586 | |
| 587 | /* Function Status Bits */ |
| 588 | SDCA_CTL_ENTITY_0_DEVICE_NEWLY_ATTACHED = BIT(0), |
| 589 | SDCA_CTL_ENTITY_0_INTS_DISABLED_ABNORMALLY = BIT(1), |
| 590 | SDCA_CTL_ENTITY_0_STREAMING_STOPPED_ABNORMALLY = BIT(2), |
| 591 | SDCA_CTL_ENTITY_0_FUNCTION_FAULT = BIT(3), |
| 592 | SDCA_CTL_ENTITY_0_UMP_SEQUENCE_FAULT = BIT(4), |
| 593 | SDCA_CTL_ENTITY_0_FUNCTION_NEEDS_INITIALIZATION = BIT(5), |
| 594 | SDCA_CTL_ENTITY_0_FUNCTION_HAS_BEEN_RESET = BIT(6), |
| 595 | SDCA_CTL_ENTITY_0_FUNCTION_BUSY = BIT(7), |
| 596 | |
| 597 | /* Function Action Bits */ |
| 598 | SDCA_CTL_ENTITY_0_RESET_FUNCTION_NOW = BIT(0), |
| 599 | }; |
| 600 | |
| 601 | #define SDCA_CTL_MIC_BIAS_NAME "Mic Bias" |
| 602 | #define SDCA_CTL_USAGE_NAME "Usage" |
| 603 | #define SDCA_CTL_LATENCY_NAME "Latency" |
| 604 | #define SDCA_CTL_CLUSTERINDEX_NAME "Cluster Index" |
| 605 | #define SDCA_CTL_DATAPORT_SELECTOR_NAME "Dataport Selector" |
| 606 | #define SDCA_CTL_MATCHING_GUID_NAME "Matching GUID" |
| 607 | #define SDCA_CTL_KEEP_ALIVE_NAME "Keep Alive" |
| 608 | #define SDCA_CTL_NDAI_STREAM_NAME "NDAI Stream" |
| 609 | #define SDCA_CTL_NDAI_CATEGORY_NAME "NDAI Category" |
| 610 | #define SDCA_CTL_NDAI_CODINGTYPE_NAME "NDAI Coding Type" |
| 611 | #define SDCA_CTL_NDAI_PACKETTYPE_NAME "NDAI Packet Type" |
| 612 | #define SDCA_CTL_MIXER_NAME "Mixer" |
| 613 | #define SDCA_CTL_SELECTOR_NAME "Selector" |
| 614 | #define SDCA_CTL_MUTE_NAME "Channel" |
| 615 | #define SDCA_CTL_CHANNEL_VOLUME_NAME "Channel Volume" |
| 616 | #define SDCA_CTL_AGC_NAME "AGC" |
| 617 | #define SDCA_CTL_BASS_BOOST_NAME "Bass Boost" |
| 618 | #define SDCA_CTL_LOUDNESS_NAME "Loudness" |
| 619 | #define SDCA_CTL_GAIN_NAME "Gain" |
| 620 | #define SDCA_CTL_BYPASS_NAME "Bypass" |
| 621 | #define SDCA_CTL_XU_ID_NAME "XU ID" |
| 622 | #define SDCA_CTL_XU_VERSION_NAME "XU Version" |
| 623 | #define SDCA_CTL_FDL_CURRENTOWNER_NAME "FDL Current Owner" |
| 624 | #define SDCA_CTL_FDL_MESSAGEOFFSET_NAME "FDL Message Offset" |
| 625 | #define SDCA_CTL_FDL_MESSAGELENGTH_NAME "FDL Message Length" |
| 626 | #define SDCA_CTL_FDL_STATUS_NAME "FDL Status" |
| 627 | #define SDCA_CTL_FDL_SET_INDEX_NAME "FDL Set Index" |
| 628 | #define SDCA_CTL_FDL_HOST_REQUEST_NAME "FDL Host Request" |
| 629 | #define SDCA_CTL_CLOCK_VALID_NAME "Clock Valid" |
| 630 | #define SDCA_CTL_SAMPLERATEINDEX_NAME "Sample Rate Index" |
| 631 | #define SDCA_CTL_CLOCK_SELECT_NAME "Clock Select" |
| 632 | #define SDCA_CTL_REQUESTED_PS_NAME "Requested PS" |
| 633 | #define SDCA_CTL_ACTUAL_PS_NAME "Actual PS" |
| 634 | #define SDCA_CTL_SELECTED_MODE_NAME "Selected Mode" |
| 635 | #define SDCA_CTL_DETECTED_MODE_NAME "Detected Mode" |
| 636 | #define SDCA_CTL_PRIVATE_NAME "Private" |
| 637 | #define SDCA_CTL_PRIVACY_POLICY_NAME "Privacy Policy" |
| 638 | #define SDCA_CTL_PRIVACY_LOCKSTATE_NAME "Privacy Lockstate" |
| 639 | #define SDCA_CTL_PRIVACY_OWNER_NAME "Privacy Owner" |
| 640 | #define SDCA_CTL_AUTHTX_CURRENTOWNER_NAME "AuthTX Current Owner" |
| 641 | #define SDCA_CTL_AUTHTX_MESSAGEOFFSET_NAME "AuthTX Message Offset" |
| 642 | #define SDCA_CTL_AUTHTX_MESSAGELENGTH_NAME "AuthTX Message Length" |
| 643 | #define SDCA_CTL_AUTHRX_CURRENTOWNER_NAME "AuthRX Current Owner" |
| 644 | #define SDCA_CTL_AUTHRX_MESSAGEOFFSET_NAME "AuthRX Message Offset" |
| 645 | #define SDCA_CTL_AUTHRX_MESSAGELENGTH_NAME "AuthRX Message Length" |
| 646 | #define SDCA_CTL_ACOUSTIC_ENERGY_LEVEL_MONITOR_NAME "Acoustic Energy Level Monitor" |
| 647 | #define SDCA_CTL_ULTRASOUND_LOOP_GAIN_NAME "Ultrasound Loop Gain" |
| 648 | #define SDCA_CTL_OPAQUESET_0_NAME "Opaqueset 0" |
| 649 | #define SDCA_CTL_OPAQUESET_1_NAME "Opaqueset 1" |
| 650 | #define SDCA_CTL_OPAQUESET_2_NAME "Opaqueset 2" |
| 651 | #define SDCA_CTL_OPAQUESET_3_NAME "Opaqueset 3" |
| 652 | #define SDCA_CTL_OPAQUESET_4_NAME "Opaqueset 4" |
| 653 | #define SDCA_CTL_OPAQUESET_5_NAME "Opaqueset 5" |
| 654 | #define SDCA_CTL_OPAQUESET_6_NAME "Opaqueset 6" |
| 655 | #define SDCA_CTL_OPAQUESET_7_NAME "Opaqueset 7" |
| 656 | #define SDCA_CTL_OPAQUESET_8_NAME "Opaqueset 8" |
| 657 | #define SDCA_CTL_OPAQUESET_9_NAME "Opaqueset 9" |
| 658 | #define SDCA_CTL_OPAQUESET_10_NAME "Opaqueset 10" |
| 659 | #define SDCA_CTL_OPAQUESET_11_NAME "Opaqueset 11" |
| 660 | #define SDCA_CTL_OPAQUESET_12_NAME "Opaqueset 12" |
| 661 | #define SDCA_CTL_OPAQUESET_13_NAME "Opaqueset 13" |
| 662 | #define SDCA_CTL_OPAQUESET_14_NAME "Opaqueset 14" |
| 663 | #define SDCA_CTL_OPAQUESET_15_NAME "Opaqueset 15" |
| 664 | #define SDCA_CTL_OPAQUESET_16_NAME "Opaqueset 16" |
| 665 | #define SDCA_CTL_OPAQUESET_17_NAME "Opaqueset 17" |
| 666 | #define SDCA_CTL_OPAQUESET_18_NAME "Opaqueset 18" |
| 667 | #define SDCA_CTL_OPAQUESET_19_NAME "Opaqueset 19" |
| 668 | #define SDCA_CTL_OPAQUESET_20_NAME "Opaqueset 20" |
| 669 | #define SDCA_CTL_OPAQUESET_21_NAME "Opaqueset 21" |
| 670 | #define SDCA_CTL_OPAQUESET_22_NAME "Opaqueset 22" |
| 671 | #define SDCA_CTL_OPAQUESET_23_NAME "Opaqueset 23" |
| 672 | #define SDCA_CTL_ALGORITHM_READY_NAME "Algorithm Ready" |
| 673 | #define SDCA_CTL_ALGORITHM_ENABLE_NAME "Algorithm Enable" |
| 674 | #define SDCA_CTL_ALGORITHM_PREPARE_NAME "Algorithm Prepare" |
| 675 | #define SDCA_CTL_CENTER_FREQUENCY_INDEX_NAME "Center Frequency Index" |
| 676 | #define SDCA_CTL_ULTRASOUND_LEVEL_NAME "Ultrasound Level" |
| 677 | #define SDCA_CTL_AE_NUMBER_NAME "AE Number" |
| 678 | #define SDCA_CTL_AE_CURRENTOWNER_NAME "AE Current Owner" |
| 679 | #define SDCA_CTL_AE_MESSAGEOFFSET_NAME "AE Message Offset" |
| 680 | #define SDCA_CTL_AE_MESSAGELENGTH_NAME "AE Message Length" |
| 681 | #define SDCA_CTL_TRIGGER_ENABLE_NAME "Trigger Enable" |
| 682 | #define SDCA_CTL_TRIGGER_STATUS_NAME "Trigger Status" |
| 683 | #define SDCA_CTL_HIST_BUFFER_MODE_NAME "Hist Buffer Mode" |
| 684 | #define SDCA_CTL_HIST_BUFFER_PREAMBLE_NAME "Hist Buffer Preamble" |
| 685 | #define SDCA_CTL_HIST_ERROR_NAME "Hist Error" |
| 686 | #define SDCA_CTL_TRIGGER_EXTENSION_NAME "Trigger Extension" |
| 687 | #define SDCA_CTL_TRIGGER_READY_NAME "Trigger Ready" |
| 688 | #define SDCA_CTL_HIST_CURRENTOWNER_NAME "Hist Current Owner" |
| 689 | #define SDCA_CTL_HIST_MESSAGEOFFSET_NAME "Hist Message Offset" |
| 690 | #define SDCA_CTL_HIST_MESSAGELENGTH_NAME "Hist Message Length" |
| 691 | #define SDCA_CTL_DTODTX_CURRENTOWNER_NAME "DTODTX Current Owner" |
| 692 | #define SDCA_CTL_DTODTX_MESSAGEOFFSET_NAME "DTODTX Message Offset" |
| 693 | #define SDCA_CTL_DTODTX_MESSAGELENGTH_NAME "DTODTX Message Length" |
| 694 | #define SDCA_CTL_DTODRX_CURRENTOWNER_NAME "DTODRX Current Owner" |
| 695 | #define SDCA_CTL_DTODRX_MESSAGEOFFSET_NAME "DTODRX Message Offset" |
| 696 | #define SDCA_CTL_DTODRX_MESSAGELENGTH_NAME "DTODRX Message Length" |
| 697 | #define SDCA_CTL_PROTECTION_MODE_NAME "Protection Mode" |
| 698 | #define SDCA_CTL_PROTECTION_STATUS_NAME "Protection Status" |
| 699 | #define SDCA_CTL_OPAQUESETREQ_INDEX_NAME "Opaqueset Req Index" |
| 700 | #define SDCA_CTL_DTODTX_CURRENTOWNER_NAME "DTODTX Current Owner" |
| 701 | #define SDCA_CTL_DTODTX_MESSAGEOFFSET_NAME "DTODTX Message Offset" |
| 702 | #define SDCA_CTL_DTODTX_MESSAGELENGTH_NAME "DTODTX Message Length" |
| 703 | #define SDCA_CTL_DTODRX_CURRENTOWNER_NAME "DTODRX Current Owner" |
| 704 | #define SDCA_CTL_DTODRX_MESSAGEOFFSET_NAME "DTODRX Message Offset" |
| 705 | #define SDCA_CTL_DTODRX_MESSAGELENGTH_NAME "DTODRX Message Length" |
| 706 | #define SDCA_CTL_POSTURENUMBER_NAME "Posture Number" |
| 707 | #define SDCA_CTL_POSTUREEXTENSION_NAME "Posture Extension" |
| 708 | #define SDCA_CTL_HORIZONTALBALANCE_NAME "Horizontal Balance" |
| 709 | #define SDCA_CTL_VERTICALBALANCE_NAME "Vertical Balance" |
| 710 | #define SDCA_CTL_TONE_DIVIDER_NAME "Tone Divider" |
| 711 | #define SDCA_CTL_HIDTX_CURRENTOWNER_NAME "HIDTX Current Owner" |
| 712 | #define SDCA_CTL_HIDTX_MESSAGEOFFSET_NAME "HIDTX Message Offset" |
| 713 | #define SDCA_CTL_HIDTX_MESSAGELENGTH_NAME "HIDTX Message Length" |
| 714 | #define SDCA_CTL_HIDRX_CURRENTOWNER_NAME "HIDRX Current Owner" |
| 715 | #define SDCA_CTL_HIDRX_MESSAGEOFFSET_NAME "HIDRX Message Offset" |
| 716 | #define SDCA_CTL_HIDRX_MESSAGELENGTH_NAME "HIDRX Message Length" |
| 717 | #define SDCA_CTL_COMMIT_GROUP_MASK_NAME "Commit Group Mask" |
| 718 | #define SDCA_CTL_FUNCTION_SDCA_VERSION_NAME "Function SDCA Version" |
| 719 | #define SDCA_CTL_FUNCTION_TYPE_NAME "Function Type" |
| 720 | #define SDCA_CTL_FUNCTION_MANUFACTURER_ID_NAME "Function Manufacturer ID" |
| 721 | #define SDCA_CTL_FUNCTION_ID_NAME "Function ID" |
| 722 | #define SDCA_CTL_FUNCTION_VERSION_NAME "Function Version" |
| 723 | #define SDCA_CTL_FUNCTION_EXTENSION_ID_NAME "Function Extension ID" |
| 724 | #define SDCA_CTL_FUNCTION_EXTENSION_VERSION_NAME "Function Extension Version" |
| 725 | #define SDCA_CTL_FUNCTION_STATUS_NAME "Function Status" |
| 726 | #define SDCA_CTL_FUNCTION_ACTION_NAME "Function Action" |
| 727 | #define SDCA_CTL_DEVICE_MANUFACTURER_ID_NAME "Device Manufacturer ID" |
| 728 | #define SDCA_CTL_DEVICE_PART_ID_NAME "Device Part ID" |
| 729 | #define SDCA_CTL_DEVICE_VERSION_NAME "Device Version" |
| 730 | #define SDCA_CTL_DEVICE_SDCA_VERSION_NAME "Device SDCA Version" |
| 731 | |
| 732 | /** |
| 733 | * enum sdca_control_datatype - SDCA Control Data Types |
| 734 | * |
| 735 | * Data Types as described in the SDCA specification v1.0 section |
| 736 | * 7.3. |
| 737 | */ |
| 738 | enum sdca_control_datatype { |
| 739 | SDCA_CTL_DATATYPE_ONEBIT, |
| 740 | SDCA_CTL_DATATYPE_INTEGER, |
| 741 | SDCA_CTL_DATATYPE_SPEC_ENCODED_VALUE, |
| 742 | SDCA_CTL_DATATYPE_BCD, |
| 743 | SDCA_CTL_DATATYPE_Q7P8DB, |
| 744 | SDCA_CTL_DATATYPE_BYTEINDEX, |
| 745 | SDCA_CTL_DATATYPE_POSTURENUMBER, |
| 746 | SDCA_CTL_DATATYPE_DP_INDEX, |
| 747 | SDCA_CTL_DATATYPE_BITINDEX, |
| 748 | SDCA_CTL_DATATYPE_BITMAP, |
| 749 | SDCA_CTL_DATATYPE_GUID, |
| 750 | SDCA_CTL_DATATYPE_IMPDEF, |
| 751 | }; |
| 752 | |
| 753 | /** |
| 754 | * enum sdca_access_mode - SDCA Control access mode |
| 755 | * |
| 756 | * Access modes as described in the SDCA specification v1.0 section |
| 757 | * 7.1.8.2. |
| 758 | */ |
| 759 | enum sdca_access_mode { |
| 760 | SDCA_ACCESS_MODE_RW = 0x0, |
| 761 | SDCA_ACCESS_MODE_DUAL = 0x1, |
| 762 | SDCA_ACCESS_MODE_RW1C = 0x2, |
| 763 | SDCA_ACCESS_MODE_RO = 0x3, |
| 764 | SDCA_ACCESS_MODE_RW1S = 0x4, |
| 765 | SDCA_ACCESS_MODE_DC = 0x5, |
| 766 | }; |
| 767 | |
| 768 | /** |
| 769 | * enum sdca_access_layer - SDCA Control access layer |
| 770 | * |
| 771 | * Access layers as described in the SDCA specification v1.0 section |
| 772 | * 7.1.9. |
| 773 | */ |
| 774 | enum sdca_access_layer { |
| 775 | SDCA_ACCESS_LAYER_USER = 1 << 0, |
| 776 | SDCA_ACCESS_LAYER_APPLICATION = 1 << 1, |
| 777 | SDCA_ACCESS_LAYER_CLASS = 1 << 2, |
| 778 | SDCA_ACCESS_LAYER_PLATFORM = 1 << 3, |
| 779 | SDCA_ACCESS_LAYER_DEVICE = 1 << 4, |
| 780 | SDCA_ACCESS_LAYER_EXTENSION = 1 << 5, |
| 781 | }; |
| 782 | |
| 783 | /** |
| 784 | * struct sdca_control_range - SDCA Control range table |
| 785 | * @cols: Number of columns in the range table. |
| 786 | * @rows: Number of rows in the range table. |
| 787 | * @data: Array of values contained in the range table. |
| 788 | */ |
| 789 | struct sdca_control_range { |
| 790 | unsigned int cols; |
| 791 | unsigned int rows; |
| 792 | u32 *data; |
| 793 | }; |
| 794 | |
| 795 | /** |
| 796 | * struct sdca_control - information for one SDCA Control |
| 797 | * @label: Name for the Control, from SDCA Specification v1.0, section 7.1.7. |
| 798 | * @sel: Identifier used for addressing. |
| 799 | * @nbits: Number of bits used in the Control. |
| 800 | * @values: Holds the Control value for constants and defaults. |
| 801 | * @cn_list: A bitmask showing the valid Control Numbers within this Control, |
| 802 | * Control Numbers typically represent channels. |
| 803 | * @interrupt_position: SCDA interrupt line that will alert to changes on this |
| 804 | * Control. |
| 805 | * @type: Format of the data in the Control. |
| 806 | * @range: Buffer describing valid range of values for the Control. |
| 807 | * @mode: Access mode of the Control. |
| 808 | * @layers: Bitmask of access layers of the Control. |
| 809 | * @deferrable: Indicates if the access to the Control can be deferred. |
| 810 | * @has_default: Indicates the Control has a default value to be written. |
| 811 | * @has_fixed: Indicates the Control only supports a single value. |
| 812 | */ |
| 813 | struct sdca_control { |
| 814 | const char *label; |
| 815 | int sel; |
| 816 | |
| 817 | int nbits; |
| 818 | int *values; |
| 819 | u64 cn_list; |
| 820 | int interrupt_position; |
| 821 | |
| 822 | enum sdca_control_datatype type; |
| 823 | struct sdca_control_range range; |
| 824 | enum sdca_access_mode mode; |
| 825 | u8 layers; |
| 826 | |
| 827 | bool deferrable; |
| 828 | bool is_volatile; |
| 829 | bool has_default; |
| 830 | bool has_fixed; |
| 831 | }; |
| 832 | |
| 833 | /** |
| 834 | * enum sdca_terminal_type - SDCA Terminal Types |
| 835 | * |
| 836 | * Indicate what a Terminal Entity is used for, see in section 6.2.3 |
| 837 | * of the SDCA v1.0 specification. |
| 838 | */ |
| 839 | enum sdca_terminal_type { |
| 840 | /* Table 77 - Data Port*/ |
| 841 | SDCA_TERM_TYPE_GENERIC = 0x101, |
| 842 | SDCA_TERM_TYPE_ULTRASOUND = 0x180, |
| 843 | SDCA_TERM_TYPE_CAPTURE_DIRECT_PCM_MIC = 0x181, |
| 844 | SDCA_TERM_TYPE_RAW_PDM_MIC = 0x182, |
| 845 | SDCA_TERM_TYPE_SPEECH = 0x183, |
| 846 | SDCA_TERM_TYPE_VOICE = 0x184, |
| 847 | SDCA_TERM_TYPE_SECONDARY_PCM_MIC = 0x185, |
| 848 | SDCA_TERM_TYPE_ACOUSTIC_CONTEXT_AWARENESS = 0x186, |
| 849 | SDCA_TERM_TYPE_DTOD_STREAM = 0x187, |
| 850 | SDCA_TERM_TYPE_REFERENCE_STREAM = 0x188, |
| 851 | SDCA_TERM_TYPE_SENSE_CAPTURE = 0x189, |
| 852 | SDCA_TERM_TYPE_STREAMING_MIC = 0x18A, |
| 853 | SDCA_TERM_TYPE_OPTIMIZATION_STREAM = 0x190, |
| 854 | SDCA_TERM_TYPE_PDM_RENDER_STREAM = 0x191, |
| 855 | SDCA_TERM_TYPE_COMPANION_DATA = 0x192, |
| 856 | /* Table 78 - Transducer */ |
| 857 | SDCA_TERM_TYPE_MICROPHONE_TRANSDUCER = 0x201, |
| 858 | SDCA_TERM_TYPE_MICROPHONE_ARRAY_TRANSDUCER = 0x205, |
| 859 | SDCA_TERM_TYPE_PRIMARY_FULL_RANGE_SPEAKER = 0x380, |
| 860 | SDCA_TERM_TYPE_PRIMARY_LFE_SPEAKER = 0x381, |
| 861 | = 0x382, |
| 862 | SDCA_TERM_TYPE_PRIMARY_ULTRASOUND_SPEAKER = 0x383, |
| 863 | SDCA_TERM_TYPE_SECONDARY_FULL_RANGE_SPEAKER = 0x390, |
| 864 | SDCA_TERM_TYPE_SECONDARY_LFE_SPEAKER = 0x391, |
| 865 | = 0x392, |
| 866 | SDCA_TERM_TYPE_SECONDARY_ULTRASOUND_SPEAKER = 0x393, |
| 867 | SDCA_TERM_TYPE_TERTIARY_FULL_RANGE_SPEAKER = 0x3A0, |
| 868 | SDCA_TERM_TYPE_TERTIARY_LFE_SPEAKER = 0x3A1, |
| 869 | = 0x3A2, |
| 870 | SDCA_TERM_TYPE_TERTIARY_ULTRASOUND_SPEAKER = 0x3A3, |
| 871 | SDCA_TERM_TYPE_SPDIF = 0x605, |
| 872 | SDCA_TERM_TYPE_NDAI_DISPLAY_AUDIO = 0x610, |
| 873 | SDCA_TERM_TYPE_NDAI_USB = 0x612, |
| 874 | SDCA_TERM_TYPE_NDAI_BLUETOOTH_MAIN = 0x614, |
| 875 | SDCA_TERM_TYPE_NDAI_BLUETOOTH_ALTERNATE = 0x615, |
| 876 | SDCA_TERM_TYPE_NDAI_BLUETOOTH_BOTH = 0x616, |
| 877 | SDCA_TERM_TYPE_LINEIN_STEREO = 0x680, |
| 878 | SDCA_TERM_TYPE_LINEIN_FRONT_LR = 0x681, |
| 879 | SDCA_TERM_TYPE_LINEIN_CENTER_LFE = 0x682, |
| 880 | SDCA_TERM_TYPE_LINEIN_SURROUND_LR = 0x683, |
| 881 | SDCA_TERM_TYPE_LINEIN_REAR_LR = 0x684, |
| 882 | SDCA_TERM_TYPE_LINEOUT_STEREO = 0x690, |
| 883 | SDCA_TERM_TYPE_LINEOUT_FRONT_LR = 0x691, |
| 884 | SDCA_TERM_TYPE_LINEOUT_CENTER_LFE = 0x692, |
| 885 | SDCA_TERM_TYPE_LINEOUT_SURROUND_LR = 0x693, |
| 886 | SDCA_TERM_TYPE_LINEOUT_REAR_LR = 0x694, |
| 887 | SDCA_TERM_TYPE_MIC_JACK = 0x6A0, |
| 888 | SDCA_TERM_TYPE_STEREO_JACK = 0x6B0, |
| 889 | SDCA_TERM_TYPE_FRONT_LR_JACK = 0x6B1, |
| 890 | SDCA_TERM_TYPE_CENTER_LFE_JACK = 0x6B2, |
| 891 | SDCA_TERM_TYPE_SURROUND_LR_JACK = 0x6B3, |
| 892 | SDCA_TERM_TYPE_REAR_LR_JACK = 0x6B4, |
| 893 | SDCA_TERM_TYPE_HEADPHONE_JACK = 0x6C0, |
| 894 | SDCA_TERM_TYPE_HEADSET_JACK = 0x6D0, |
| 895 | /* Table 79 - System */ |
| 896 | SDCA_TERM_TYPE_SENSE_DATA = 0x280, |
| 897 | SDCA_TERM_TYPE_PRIVACY_SIGNALING = 0x741, |
| 898 | SDCA_TERM_TYPE_PRIVACY_INDICATORS = 0x747, |
| 899 | }; |
| 900 | |
| 901 | #define SDCA_TERM_TYPE_LINEIN_STEREO_NAME "LineIn Stereo" |
| 902 | #define SDCA_TERM_TYPE_LINEIN_FRONT_LR_NAME "LineIn Front-LR" |
| 903 | #define SDCA_TERM_TYPE_LINEIN_CENTER_LFE_NAME "LineIn Center-LFE" |
| 904 | #define SDCA_TERM_TYPE_LINEIN_SURROUND_LR_NAME "LineIn Surround-LR" |
| 905 | #define SDCA_TERM_TYPE_LINEIN_REAR_LR_NAME "LineIn Rear-LR" |
| 906 | #define SDCA_TERM_TYPE_LINEOUT_STEREO_NAME "LineOut Stereo" |
| 907 | #define SDCA_TERM_TYPE_LINEOUT_FRONT_LR_NAME "LineOut Front-LR" |
| 908 | #define SDCA_TERM_TYPE_LINEOUT_CENTER_LFE_NAME "LineOut Center-LFE" |
| 909 | #define SDCA_TERM_TYPE_LINEOUT_SURROUND_LR_NAME "LineOut Surround-LR" |
| 910 | #define SDCA_TERM_TYPE_LINEOUT_REAR_LR_NAME "LineOut Rear-LR" |
| 911 | #define SDCA_TERM_TYPE_MIC_JACK_NAME "Microphone" |
| 912 | #define SDCA_TERM_TYPE_STEREO_JACK_NAME "Speaker Stereo" |
| 913 | #define SDCA_TERM_TYPE_FRONT_LR_JACK_NAME "Speaker Front-LR" |
| 914 | #define SDCA_TERM_TYPE_CENTER_LFE_JACK_NAME "Speaker Center-LFE" |
| 915 | #define SDCA_TERM_TYPE_SURROUND_LR_JACK_NAME "Speaker Surround-LR" |
| 916 | #define SDCA_TERM_TYPE_REAR_LR_JACK_NAME "Speaker Rear-LR" |
| 917 | #define SDCA_TERM_TYPE_HEADPHONE_JACK_NAME "Headphone" |
| 918 | #define SDCA_TERM_TYPE_HEADSET_JACK_NAME "Headset" |
| 919 | |
| 920 | /** |
| 921 | * enum sdca_connector_type - SDCA Connector Types |
| 922 | * |
| 923 | * Indicate the type of Connector that a Terminal Entity represents, |
| 924 | * see section 6.2.4 of the SDCA v1.0 specification. |
| 925 | */ |
| 926 | enum sdca_connector_type { |
| 927 | SDCA_CONN_TYPE_UNKNOWN = 0x00, |
| 928 | SDCA_CONN_TYPE_2P5MM_JACK = 0x01, |
| 929 | SDCA_CONN_TYPE_3P5MM_JACK = 0x02, |
| 930 | SDCA_CONN_TYPE_QUARTER_INCH_JACK = 0x03, |
| 931 | SDCA_CONN_TYPE_XLR = 0x05, |
| 932 | SDCA_CONN_TYPE_SPDIF_OPTICAL = 0x06, |
| 933 | SDCA_CONN_TYPE_RCA = 0x07, |
| 934 | SDCA_CONN_TYPE_DIN = 0x0E, |
| 935 | SDCA_CONN_TYPE_MINI_DIN = 0x0F, |
| 936 | SDCA_CONN_TYPE_EIAJ_OPTICAL = 0x13, |
| 937 | SDCA_CONN_TYPE_HDMI = 0x14, |
| 938 | SDCA_CONN_TYPE_DISPLAYPORT = 0x17, |
| 939 | SDCA_CONN_TYPE_LIGHTNING = 0x1B, |
| 940 | SDCA_CONN_TYPE_USB_C = 0x1E, |
| 941 | SDCA_CONN_TYPE_OTHER = 0xFF, |
| 942 | }; |
| 943 | |
| 944 | /** |
| 945 | * struct sdca_entity_iot - information specific to Input/Output Entities |
| 946 | * @clock: Pointer to the Entity providing this Terminal's clock. |
| 947 | * @type: Usage of the Terminal Entity. |
| 948 | * @connector: Physical Connector of the Terminal Entity. |
| 949 | * @reference: Physical Jack number of the Terminal Entity. |
| 950 | * @num_transducer: Number of transducers attached to the Terminal Entity. |
| 951 | * @is_dataport: Boolean indicating if this Terminal represents a Dataport. |
| 952 | */ |
| 953 | struct sdca_entity_iot { |
| 954 | struct sdca_entity *clock; |
| 955 | |
| 956 | enum sdca_terminal_type type; |
| 957 | enum sdca_connector_type connector; |
| 958 | int reference; |
| 959 | int num_transducer; |
| 960 | |
| 961 | bool is_dataport; |
| 962 | }; |
| 963 | |
| 964 | /** |
| 965 | * enum sdca_clock_type - SDCA Clock Types |
| 966 | * |
| 967 | * Indicate the synchronicity of an Clock Entity, see section 6.4.1.3 |
| 968 | * of the SDCA v1.0 specification. |
| 969 | */ |
| 970 | enum sdca_clock_type { |
| 971 | SDCA_CLOCK_TYPE_EXTERNAL = 0x00, |
| 972 | SDCA_CLOCK_TYPE_INTERNAL_ASYNC = 0x01, |
| 973 | SDCA_CLOCK_TYPE_INTERNAL_SYNC = 0x02, |
| 974 | SDCA_CLOCK_TYPE_INTERNAL_SOURCE_SYNC = 0x03, |
| 975 | }; |
| 976 | |
| 977 | /** |
| 978 | * struct sdca_entity_cs - information specific to Clock Source Entities |
| 979 | * @type: Synchronicity of the Clock Source. |
| 980 | * @max_delay: The maximum delay in microseconds before the clock is stable. |
| 981 | */ |
| 982 | struct sdca_entity_cs { |
| 983 | enum sdca_clock_type type; |
| 984 | unsigned int max_delay; |
| 985 | }; |
| 986 | |
| 987 | /** |
| 988 | * enum sdca_pde_power_state - SDCA Power States |
| 989 | * |
| 990 | * SDCA Power State values from SDCA specification v1.0 Section 7.12.4. |
| 991 | */ |
| 992 | enum sdca_pde_power_state { |
| 993 | SDCA_PDE_PS0 = 0x0, |
| 994 | SDCA_PDE_PS1 = 0x1, |
| 995 | SDCA_PDE_PS2 = 0x2, |
| 996 | SDCA_PDE_PS3 = 0x3, |
| 997 | SDCA_PDE_PS4 = 0x4, |
| 998 | }; |
| 999 | |
| 1000 | /** |
| 1001 | * struct sdca_pde_delay - describes the delay changing between 2 power states |
| 1002 | * @from_ps: The power state being exited. |
| 1003 | * @to_ps: The power state being entered. |
| 1004 | * @us: The delay in microseconds switching between the two states. |
| 1005 | */ |
| 1006 | struct sdca_pde_delay { |
| 1007 | int from_ps; |
| 1008 | int to_ps; |
| 1009 | unsigned int us; |
| 1010 | }; |
| 1011 | |
| 1012 | /** |
| 1013 | * struct sdca_entity_pde - information specific to Power Domain Entities |
| 1014 | * @managed: Dynamically allocated array pointing to each Entity |
| 1015 | * controlled by this PDE. |
| 1016 | * @max_delay: Dynamically allocated array of delays for switching |
| 1017 | * between power states. |
| 1018 | * @num_managed: Number of Entities controlled by this PDE. |
| 1019 | * @num_max_delay: Number of delays specified for state changes. |
| 1020 | */ |
| 1021 | struct sdca_entity_pde { |
| 1022 | struct sdca_entity **managed; |
| 1023 | struct sdca_pde_delay *max_delay; |
| 1024 | int num_managed; |
| 1025 | int num_max_delay; |
| 1026 | }; |
| 1027 | |
| 1028 | /** |
| 1029 | * enum sdca_entity_type - SDCA Entity Type codes |
| 1030 | * @SDCA_ENTITY_TYPE_ENTITY_0: Entity 0, not actually from the |
| 1031 | * specification but useful internally as an Entity structure |
| 1032 | * is allocated for Entity 0, to hold Entity 0 controls. |
| 1033 | * @SDCA_ENTITY_TYPE_IT: Input Terminal. |
| 1034 | * @SDCA_ENTITY_TYPE_OT: Output Terminal. |
| 1035 | * @SDCA_ENTITY_TYPE_MU: Mixer Unit. |
| 1036 | * @SDCA_ENTITY_TYPE_SU: Selector Unit. |
| 1037 | * @SDCA_ENTITY_TYPE_FU: Feature Unit. |
| 1038 | * @SDCA_ENTITY_TYPE_XU: Extension Unit. |
| 1039 | * @SDCA_ENTITY_TYPE_CS: Clock Source. |
| 1040 | * @SDCA_ENTITY_TYPE_CX: Clock selector. |
| 1041 | * @SDCA_ENTITY_TYPE_PDE: Power-Domain Entity. |
| 1042 | * @SDCA_ENTITY_TYPE_GE: Group Entity. |
| 1043 | * @SDCA_ENTITY_TYPE_SPE: Security & Privacy Entity. |
| 1044 | * @SDCA_ENTITY_TYPE_CRU: Channel Remapping Unit. |
| 1045 | * @SDCA_ENTITY_TYPE_UDMPU: Up-Down Mixer Processing Unit. |
| 1046 | * @SDCA_ENTITY_TYPE_MFPU: Multi-Function Processing Unit. |
| 1047 | * @SDCA_ENTITY_TYPE_SMPU: Smart Microphone Processing Unit. |
| 1048 | * @SDCA_ENTITY_TYPE_SAPU: Smart Amp Processing Unit. |
| 1049 | * @SDCA_ENTITY_TYPE_PPU: Posture Processing Unit. |
| 1050 | * @SDCA_ENTITY_TYPE_TG: Tone Generator. |
| 1051 | * @SDCA_ENTITY_TYPE_HIDE: Human Interface Device Entity. |
| 1052 | * |
| 1053 | * SDCA Entity Types from SDCA specification v1.0 Section 6.1.2 |
| 1054 | * all Entity Types not described are reserved. |
| 1055 | */ |
| 1056 | enum sdca_entity_type { |
| 1057 | SDCA_ENTITY_TYPE_ENTITY_0 = 0x00, |
| 1058 | SDCA_ENTITY_TYPE_IT = 0x02, |
| 1059 | SDCA_ENTITY_TYPE_OT = 0x03, |
| 1060 | SDCA_ENTITY_TYPE_MU = 0x05, |
| 1061 | SDCA_ENTITY_TYPE_SU = 0x06, |
| 1062 | SDCA_ENTITY_TYPE_FU = 0x07, |
| 1063 | SDCA_ENTITY_TYPE_XU = 0x0A, |
| 1064 | SDCA_ENTITY_TYPE_CS = 0x0B, |
| 1065 | SDCA_ENTITY_TYPE_CX = 0x0C, |
| 1066 | SDCA_ENTITY_TYPE_PDE = 0x11, |
| 1067 | SDCA_ENTITY_TYPE_GE = 0x12, |
| 1068 | SDCA_ENTITY_TYPE_SPE = 0x13, |
| 1069 | SDCA_ENTITY_TYPE_CRU = 0x20, |
| 1070 | SDCA_ENTITY_TYPE_UDMPU = 0x21, |
| 1071 | SDCA_ENTITY_TYPE_MFPU = 0x22, |
| 1072 | SDCA_ENTITY_TYPE_SMPU = 0x23, |
| 1073 | SDCA_ENTITY_TYPE_SAPU = 0x24, |
| 1074 | SDCA_ENTITY_TYPE_PPU = 0x25, |
| 1075 | SDCA_ENTITY_TYPE_TG = 0x30, |
| 1076 | SDCA_ENTITY_TYPE_HIDE = 0x31, |
| 1077 | }; |
| 1078 | |
| 1079 | /** |
| 1080 | * struct sdca_ge_control - control entry in the affected controls list |
| 1081 | * @id: Entity ID of the Control affected. |
| 1082 | * @sel: Control Selector of the Control affected. |
| 1083 | * @cn: Control Number of the Control affected. |
| 1084 | * @val: Value written to Control for this Mode. |
| 1085 | */ |
| 1086 | struct sdca_ge_control { |
| 1087 | int id; |
| 1088 | int sel; |
| 1089 | int cn; |
| 1090 | int val; |
| 1091 | }; |
| 1092 | |
| 1093 | /** |
| 1094 | * struct sdca_ge_mode - mode entry in the affected controls list |
| 1095 | * @controls: Dynamically allocated array of controls written for this Mode. |
| 1096 | * @num_controls: Number of controls written in this Mode. |
| 1097 | * @val: GE Selector Mode value. |
| 1098 | */ |
| 1099 | struct sdca_ge_mode { |
| 1100 | struct sdca_ge_control *controls; |
| 1101 | int num_controls; |
| 1102 | int val; |
| 1103 | }; |
| 1104 | |
| 1105 | /** |
| 1106 | * struct sdca_entity_ge - information specific to Group Entities |
| 1107 | * @kctl: ALSA control pointer that can be used by linked Entities. |
| 1108 | * @modes: Dynamically allocated array of Modes and the Controls written |
| 1109 | * in each mode. |
| 1110 | * @num_modes: Number of Modes. |
| 1111 | */ |
| 1112 | struct sdca_entity_ge { |
| 1113 | struct snd_kcontrol_new *kctl; |
| 1114 | struct sdca_ge_mode *modes; |
| 1115 | int num_modes; |
| 1116 | }; |
| 1117 | |
| 1118 | /** |
| 1119 | * struct sdca_entity_hide - information specific to HIDE Entities |
| 1120 | * @hid: HID device structure |
| 1121 | * @num_hidtx_ids: number of HIDTx Report ID |
| 1122 | * @num_hidrx_ids: number of HIDRx Report ID |
| 1123 | * @hidtx_ids: HIDTx Report ID |
| 1124 | * @hidrx_ids: HIDRx Report ID |
| 1125 | * @af_number_list: which Audio Function Numbers within this Device are |
| 1126 | * sending/receiving the messages in this HIDE |
| 1127 | * @hide_reside_function_num: indicating which Audio Function Numbers |
| 1128 | * within this Device |
| 1129 | * @max_delay: the maximum time in microseconds allowed for the Device |
| 1130 | * to change the ownership from Device to Host |
| 1131 | * @hid_report_desc: HID Report Descriptor for the HIDE Entity |
| 1132 | * @hid_desc: HID descriptor for the HIDE Entity |
| 1133 | */ |
| 1134 | struct sdca_entity_hide { |
| 1135 | struct hid_device *hid; |
| 1136 | unsigned int *hidtx_ids; |
| 1137 | unsigned int *hidrx_ids; |
| 1138 | int num_hidtx_ids; |
| 1139 | int num_hidrx_ids; |
| 1140 | unsigned int af_number_list[SDCA_MAX_FUNCTION_COUNT]; |
| 1141 | unsigned int hide_reside_function_num; |
| 1142 | unsigned int max_delay; |
| 1143 | unsigned char *hid_report_desc; |
| 1144 | struct hid_descriptor hid_desc; |
| 1145 | }; |
| 1146 | |
| 1147 | /** |
| 1148 | * enum sdca_xu_reset_machanism - SDCA FDL Resets |
| 1149 | */ |
| 1150 | enum sdca_xu_reset_mechanism { |
| 1151 | SDCA_XU_RESET_FUNCTION = 0x0, |
| 1152 | SDCA_XU_RESET_DEVICE = 0x1, |
| 1153 | SDCA_XU_RESET_BUS = 0x2, |
| 1154 | }; |
| 1155 | |
| 1156 | /** |
| 1157 | * struct sdca_entity_xu - information specific to XU Entities |
| 1158 | * @max_delay: the maximum time in microseconds allowed for the Device |
| 1159 | * to change the ownership from Device to Host |
| 1160 | * @reset_mechanism: indicates the type of reset that can be requested |
| 1161 | * the end of an FDL. |
| 1162 | */ |
| 1163 | struct sdca_entity_xu { |
| 1164 | unsigned int max_delay; |
| 1165 | enum sdca_xu_reset_mechanism reset_mechanism; |
| 1166 | }; |
| 1167 | |
| 1168 | /** |
| 1169 | * struct sdca_entity - information for one SDCA Entity |
| 1170 | * @label: String such as "OT 12". |
| 1171 | * @id: Identifier used for addressing. |
| 1172 | * @type: Type code for the Entity. |
| 1173 | * @group: Pointer to Group Entity controlling this one, NULL if N/A. |
| 1174 | * @sources: Dynamically allocated array pointing to each input Entity |
| 1175 | * connected to this Entity. |
| 1176 | * @controls: Dynamically allocated array of Controls. |
| 1177 | * @num_sources: Number of sources for the Entity. |
| 1178 | * @num_controls: Number of Controls for the Entity. |
| 1179 | * @iot: Input/Output Terminal specific Entity properties. |
| 1180 | * @cs: Clock Source specific Entity properties. |
| 1181 | * @pde: Power Domain Entity specific Entity properties. |
| 1182 | * @ge: Group Entity specific Entity properties. |
| 1183 | * @hide: HIDE Entity specific Entity properties. |
| 1184 | * @xu: XU Entity specific Entity properties. |
| 1185 | */ |
| 1186 | struct sdca_entity { |
| 1187 | const char *label; |
| 1188 | int id; |
| 1189 | enum sdca_entity_type type; |
| 1190 | |
| 1191 | struct sdca_entity *group; |
| 1192 | struct sdca_entity **sources; |
| 1193 | struct sdca_control *controls; |
| 1194 | int num_sources; |
| 1195 | int num_controls; |
| 1196 | union { |
| 1197 | struct sdca_entity_iot iot; |
| 1198 | struct sdca_entity_cs cs; |
| 1199 | struct sdca_entity_pde pde; |
| 1200 | struct sdca_entity_ge ge; |
| 1201 | struct sdca_entity_hide hide; |
| 1202 | struct sdca_entity_xu xu; |
| 1203 | }; |
| 1204 | }; |
| 1205 | |
| 1206 | /** |
| 1207 | * enum sdca_channel_purpose - SDCA Channel Purpose code |
| 1208 | * |
| 1209 | * Channel Purpose codes as described in the SDCA specification v1.0 |
| 1210 | * section 11.4.3. |
| 1211 | */ |
| 1212 | enum sdca_channel_purpose { |
| 1213 | /* Table 210 - Purpose */ |
| 1214 | SDCA_CHAN_PURPOSE_GENERIC_AUDIO = 0x01, |
| 1215 | SDCA_CHAN_PURPOSE_VOICE = 0x02, |
| 1216 | SDCA_CHAN_PURPOSE_SPEECH = 0x03, |
| 1217 | SDCA_CHAN_PURPOSE_AMBIENT = 0x04, |
| 1218 | SDCA_CHAN_PURPOSE_REFERENCE = 0x05, |
| 1219 | SDCA_CHAN_PURPOSE_ULTRASOUND = 0x06, |
| 1220 | SDCA_CHAN_PURPOSE_SENSE = 0x08, |
| 1221 | SDCA_CHAN_PURPOSE_SILENCE = 0xFE, |
| 1222 | SDCA_CHAN_PURPOSE_NON_AUDIO = 0xFF, |
| 1223 | /* Table 211 - Amp Sense */ |
| 1224 | SDCA_CHAN_PURPOSE_SENSE_V1 = 0x09, |
| 1225 | SDCA_CHAN_PURPOSE_SENSE_V2 = 0x0A, |
| 1226 | SDCA_CHAN_PURPOSE_SENSE_V12_INTERLEAVED = 0x10, |
| 1227 | SDCA_CHAN_PURPOSE_SENSE_V21_INTERLEAVED = 0x11, |
| 1228 | SDCA_CHAN_PURPOSE_SENSE_V12_PACKED = 0x12, |
| 1229 | SDCA_CHAN_PURPOSE_SENSE_V21_PACKED = 0x13, |
| 1230 | SDCA_CHAN_PURPOSE_SENSE_V1212_INTERLEAVED = 0x14, |
| 1231 | SDCA_CHAN_PURPOSE_SENSE_V2121_INTERLEAVED = 0x15, |
| 1232 | SDCA_CHAN_PURPOSE_SENSE_V1122_INTERLEAVED = 0x16, |
| 1233 | SDCA_CHAN_PURPOSE_SENSE_V2211_INTERLEAVED = 0x17, |
| 1234 | SDCA_CHAN_PURPOSE_SENSE_V1212_PACKED = 0x18, |
| 1235 | SDCA_CHAN_PURPOSE_SENSE_V2121_PACKED = 0x19, |
| 1236 | SDCA_CHAN_PURPOSE_SENSE_V1122_PACKED = 0x1A, |
| 1237 | SDCA_CHAN_PURPOSE_SENSE_V2211_PACKED = 0x1B, |
| 1238 | }; |
| 1239 | |
| 1240 | /** |
| 1241 | * enum sdca_channel_relationship - SDCA Channel Relationship code |
| 1242 | * |
| 1243 | * Channel Relationship codes as described in the SDCA specification |
| 1244 | * v1.0 section 11.4.2. |
| 1245 | */ |
| 1246 | enum sdca_channel_relationship { |
| 1247 | /* Table 206 - Streaming */ |
| 1248 | SDCA_CHAN_REL_UNDEFINED = 0x00, |
| 1249 | SDCA_CHAN_REL_GENERIC_MONO = 0x01, |
| 1250 | SDCA_CHAN_REL_GENERIC_LEFT = 0x02, |
| 1251 | SDCA_CHAN_REL_GENERIC_RIGHT = 0x03, |
| 1252 | SDCA_CHAN_REL_GENERIC_TOP = 0x48, |
| 1253 | SDCA_CHAN_REL_GENERIC_BOTTOM = 0x49, |
| 1254 | SDCA_CHAN_REL_CAPTURE_DIRECT = 0x4E, |
| 1255 | SDCA_CHAN_REL_RENDER_DIRECT = 0x4F, |
| 1256 | SDCA_CHAN_REL_FRONT_LEFT = 0x0B, |
| 1257 | SDCA_CHAN_REL_FRONT_RIGHT = 0x0C, |
| 1258 | SDCA_CHAN_REL_FRONT_CENTER = 0x0D, |
| 1259 | SDCA_CHAN_REL_SIDE_LEFT = 0x12, |
| 1260 | SDCA_CHAN_REL_SIDE_RIGHT = 0x13, |
| 1261 | SDCA_CHAN_REL_BACK_LEFT = 0x16, |
| 1262 | SDCA_CHAN_REL_BACK_RIGHT = 0x17, |
| 1263 | SDCA_CHAN_REL_LOW_FREQUENCY_EFFECTS = 0x43, |
| 1264 | SDCA_CHAN_REL_SOUNDWIRE_MIC = 0x55, |
| 1265 | SDCA_CHAN_REL_SENSE_TRANSDUCER_1 = 0x58, |
| 1266 | SDCA_CHAN_REL_SENSE_TRANSDUCER_2 = 0x59, |
| 1267 | SDCA_CHAN_REL_SENSE_TRANSDUCER_12 = 0x5A, |
| 1268 | SDCA_CHAN_REL_SENSE_TRANSDUCER_21 = 0x5B, |
| 1269 | SDCA_CHAN_REL_ECHOREF_NONE = 0x70, |
| 1270 | SDCA_CHAN_REL_ECHOREF_1 = 0x71, |
| 1271 | SDCA_CHAN_REL_ECHOREF_2 = 0x72, |
| 1272 | SDCA_CHAN_REL_ECHOREF_3 = 0x73, |
| 1273 | SDCA_CHAN_REL_ECHOREF_4 = 0x74, |
| 1274 | SDCA_CHAN_REL_ECHOREF_ALL = 0x75, |
| 1275 | SDCA_CHAN_REL_ECHOREF_LFE_ALL = 0x76, |
| 1276 | /* Table 207 - Speaker */ |
| 1277 | SDCA_CHAN_REL_PRIMARY_TRANSDUCER = 0x50, |
| 1278 | SDCA_CHAN_REL_SECONDARY_TRANSDUCER = 0x51, |
| 1279 | SDCA_CHAN_REL_TERTIARY_TRANSDUCER = 0x52, |
| 1280 | SDCA_CHAN_REL_LOWER_LEFT_ALLTRANSDUCER = 0x60, |
| 1281 | SDCA_CHAN_REL_LOWER_RIGHT_ALLTRANSDUCER = 0x61, |
| 1282 | SDCA_CHAN_REL_UPPER_LEFT_ALLTRANSDUCER = 0x62, |
| 1283 | SDCA_CHAN_REL_UPPER_RIGHT_ALLTRANSDUCER = 0x63, |
| 1284 | SDCA_CHAN_REL_LOWER_LEFT_PRIMARY = 0x64, |
| 1285 | SDCA_CHAN_REL_LOWER_RIGHT_PRIMARY = 0x65, |
| 1286 | SDCA_CHAN_REL_UPPER_LEFT_PRIMARY = 0x66, |
| 1287 | SDCA_CHAN_REL_UPPER_RIGHT_PRIMARY = 0x67, |
| 1288 | SDCA_CHAN_REL_LOWER_LEFT_SECONDARY = 0x68, |
| 1289 | SDCA_CHAN_REL_LOWER_RIGHT_SECONDARY = 0x69, |
| 1290 | SDCA_CHAN_REL_UPPER_LEFT_SECONDARY = 0x6A, |
| 1291 | SDCA_CHAN_REL_UPPER_RIGHT_SECONDARY = 0x6B, |
| 1292 | SDCA_CHAN_REL_LOWER_LEFT_TERTIARY = 0x6C, |
| 1293 | SDCA_CHAN_REL_LOWER_RIGHT_TERTIARY = 0x6D, |
| 1294 | SDCA_CHAN_REL_UPPER_LEFT_TERTIARY = 0x6E, |
| 1295 | SDCA_CHAN_REL_UPPER_RIGHT_TERTIARY = 0x6F, |
| 1296 | SDCA_CHAN_REL_DERIVED_LOWER_LEFT_PRIMARY = 0x94, |
| 1297 | SDCA_CHAN_REL_DERIVED_LOWER_RIGHT_PRIMARY = 0x95, |
| 1298 | SDCA_CHAN_REL_DERIVED_UPPER_LEFT_PRIMARY = 0x96, |
| 1299 | SDCA_CHAN_REL_DERIVED_UPPER_RIGHT_PRIMARY = 0x97, |
| 1300 | SDCA_CHAN_REL_DERIVED_LOWER_LEFT_SECONDARY = 0x98, |
| 1301 | SDCA_CHAN_REL_DERIVED_LOWER_RIGHT_SECONDARY = 0x99, |
| 1302 | SDCA_CHAN_REL_DERIVED_UPPER_LEFT_SECONDARY = 0x9A, |
| 1303 | SDCA_CHAN_REL_DERIVED_UPPER_RIGHT_SECONDARY = 0x9B, |
| 1304 | SDCA_CHAN_REL_DERIVED_LOWER_LEFT_TERTIARY = 0x9C, |
| 1305 | SDCA_CHAN_REL_DERIVED_LOWER_RIGHT_TERTIARY = 0x9D, |
| 1306 | SDCA_CHAN_REL_DERIVED_UPPER_LEFT_TERTIARY = 0x9E, |
| 1307 | SDCA_CHAN_REL_DERIVED_UPPER_RIGHT_TERTIARY = 0x9F, |
| 1308 | SDCA_CHAN_REL_DERIVED_MONO_PRIMARY = 0xA0, |
| 1309 | SDCA_CHAN_REL_DERIVED_MONO_SECONDARY = 0xAB, |
| 1310 | SDCA_CHAN_REL_DERIVED_MONO_TERTIARY = 0xAC, |
| 1311 | /* Table 208 - Equipment */ |
| 1312 | SDCA_CHAN_REL_EQUIPMENT_LEFT = 0x02, |
| 1313 | SDCA_CHAN_REL_EQUIPMENT_RIGHT = 0x03, |
| 1314 | SDCA_CHAN_REL_EQUIPMENT_COMBINED = 0x47, |
| 1315 | SDCA_CHAN_REL_EQUIPMENT_TOP = 0x48, |
| 1316 | SDCA_CHAN_REL_EQUIPMENT_BOTTOM = 0x49, |
| 1317 | SDCA_CHAN_REL_EQUIPMENT_TOP_LEFT = 0x4A, |
| 1318 | SDCA_CHAN_REL_EQUIPMENT_BOTTOM_LEFT = 0x4B, |
| 1319 | SDCA_CHAN_REL_EQUIPMENT_TOP_RIGHT = 0x4C, |
| 1320 | SDCA_CHAN_REL_EQUIPMENT_BOTTOM_RIGHT = 0x4D, |
| 1321 | SDCA_CHAN_REL_EQUIPMENT_SILENCED_OUTPUT = 0x57, |
| 1322 | /* Table 209 - Other */ |
| 1323 | SDCA_CHAN_REL_ARRAY = 0x04, |
| 1324 | SDCA_CHAN_REL_MIC = 0x53, |
| 1325 | SDCA_CHAN_REL_RAW = 0x54, |
| 1326 | SDCA_CHAN_REL_SILENCED_MIC = 0x56, |
| 1327 | SDCA_CHAN_REL_MULTI_SOURCE_1 = 0x78, |
| 1328 | SDCA_CHAN_REL_MULTI_SOURCE_2 = 0x79, |
| 1329 | SDCA_CHAN_REL_MULTI_SOURCE_3 = 0x7A, |
| 1330 | SDCA_CHAN_REL_MULTI_SOURCE_4 = 0x7B, |
| 1331 | }; |
| 1332 | |
| 1333 | /** |
| 1334 | * struct sdca_channel - a single Channel with a Cluster |
| 1335 | * @id: Identifier used for addressing. |
| 1336 | * @purpose: Indicates the purpose of the Channel, usually to give |
| 1337 | * semantic meaning to the audio, eg. voice, ultrasound. |
| 1338 | * @relationship: Indicates the relationship of this Channel to others |
| 1339 | * in the Cluster, often used to identify the physical position of the |
| 1340 | * Channel eg. left. |
| 1341 | */ |
| 1342 | struct sdca_channel { |
| 1343 | int id; |
| 1344 | enum sdca_channel_purpose purpose; |
| 1345 | enum sdca_channel_relationship relationship; |
| 1346 | }; |
| 1347 | |
| 1348 | /** |
| 1349 | * struct sdca_cluster - information about an SDCA Channel Cluster |
| 1350 | * @id: Identifier used for addressing. |
| 1351 | * @num_channels: Number of Channels within this Cluster. |
| 1352 | * @channels: Dynamically allocated array of Channels. |
| 1353 | */ |
| 1354 | struct sdca_cluster { |
| 1355 | int id; |
| 1356 | int num_channels; |
| 1357 | struct sdca_channel *channels; |
| 1358 | }; |
| 1359 | |
| 1360 | /** |
| 1361 | * enum sdca_cluster_range - SDCA Range column definitions for ClusterIndex |
| 1362 | */ |
| 1363 | enum sdca_cluster_range { |
| 1364 | SDCA_CLUSTER_BYTEINDEX = 0, |
| 1365 | SDCA_CLUSTER_CLUSTERID = 1, |
| 1366 | SDCA_CLUSTER_NCOLS = 2, |
| 1367 | }; |
| 1368 | |
| 1369 | /** |
| 1370 | * struct sdca_fdl_file - information about a file from a fileset used in FDL |
| 1371 | * @vendor_id: Vendor ID of the file. |
| 1372 | * @file_id: File ID of the file. |
| 1373 | * @fdl_offset: Offset information for FDL. |
| 1374 | */ |
| 1375 | struct sdca_fdl_file { |
| 1376 | u16 vendor_id; |
| 1377 | u32 file_id; |
| 1378 | u32 fdl_offset; |
| 1379 | }; |
| 1380 | |
| 1381 | /** |
| 1382 | * struct sdca_fdl_set - information about a set of files used in FDL |
| 1383 | * @files: Array of files in this FDL set. |
| 1384 | * @num_files: Number of files in this FDL set. |
| 1385 | * @id: ID of the FDL set. |
| 1386 | */ |
| 1387 | struct sdca_fdl_set { |
| 1388 | struct sdca_fdl_file *files; |
| 1389 | int num_files; |
| 1390 | u32 id; |
| 1391 | }; |
| 1392 | |
| 1393 | /** |
| 1394 | * struct sdca_fdl_data - information about a function's FDL data |
| 1395 | * @swft: Pointer to the SoundWire File Table. |
| 1396 | * @sets: Array of FDL sets used by this function. |
| 1397 | * @num_sets: Number of FDL sets used by this function. |
| 1398 | */ |
| 1399 | struct sdca_fdl_data { |
| 1400 | struct acpi_table_swft *swft; |
| 1401 | struct sdca_fdl_set *sets; |
| 1402 | int num_sets; |
| 1403 | }; |
| 1404 | |
| 1405 | /** |
| 1406 | * struct sdca_function_data - top-level information for one SDCA function |
| 1407 | * @desc: Pointer to short descriptor from initial parsing. |
| 1408 | * @init_table: Pointer to a table of initialization writes. |
| 1409 | * @entities: Dynamically allocated array of Entities. |
| 1410 | * @clusters: Dynamically allocated array of Channel Clusters. |
| 1411 | * @num_init_table: Number of initialization writes. |
| 1412 | * @num_entities: Number of Entities reported in this Function. |
| 1413 | * @num_clusters: Number of Channel Clusters reported in this Function. |
| 1414 | * @busy_max_delay: Maximum Function busy delay in microseconds, before an |
| 1415 | * error should be reported. |
| 1416 | * @reset_max_delay: Maximum Function reset delay in microseconds, before an |
| 1417 | * error should be reported. |
| 1418 | * @fdl_data: FDL data for this Function, if available. |
| 1419 | */ |
| 1420 | struct sdca_function_data { |
| 1421 | struct sdca_function_desc *desc; |
| 1422 | |
| 1423 | struct sdca_init_write *init_table; |
| 1424 | struct sdca_entity *entities; |
| 1425 | struct sdca_cluster *clusters; |
| 1426 | int num_init_table; |
| 1427 | int num_entities; |
| 1428 | int num_clusters; |
| 1429 | |
| 1430 | unsigned int busy_max_delay; |
| 1431 | unsigned int reset_max_delay; |
| 1432 | |
| 1433 | struct sdca_fdl_data fdl_data; |
| 1434 | }; |
| 1435 | |
| 1436 | static inline u32 sdca_range(struct sdca_control_range *range, |
| 1437 | unsigned int col, unsigned int row) |
| 1438 | { |
| 1439 | return range->data[(row * range->cols) + col]; |
| 1440 | } |
| 1441 | |
| 1442 | static inline u32 sdca_range_search(struct sdca_control_range *range, |
| 1443 | int search_col, int value, int result_col) |
| 1444 | { |
| 1445 | int i; |
| 1446 | |
| 1447 | for (i = 0; i < range->rows; i++) { |
| 1448 | if (sdca_range(range, col: search_col, row: i) == value) |
| 1449 | return sdca_range(range, col: result_col, row: i); |
| 1450 | } |
| 1451 | |
| 1452 | return 0; |
| 1453 | } |
| 1454 | |
| 1455 | int sdca_parse_function(struct device *dev, struct sdw_slave *sdw, |
| 1456 | struct sdca_function_desc *desc, |
| 1457 | struct sdca_function_data *function); |
| 1458 | |
| 1459 | const char *sdca_find_terminal_name(enum sdca_terminal_type type); |
| 1460 | |
| 1461 | struct sdca_control *sdca_selector_find_control(struct device *dev, |
| 1462 | struct sdca_entity *entity, |
| 1463 | const int sel); |
| 1464 | struct sdca_control_range *sdca_control_find_range(struct device *dev, |
| 1465 | struct sdca_entity *entity, |
| 1466 | struct sdca_control *control, |
| 1467 | int cols, int rows); |
| 1468 | struct sdca_control_range *sdca_selector_find_range(struct device *dev, |
| 1469 | struct sdca_entity *entity, |
| 1470 | int sel, int cols, int rows); |
| 1471 | struct sdca_cluster *sdca_id_find_cluster(struct device *dev, |
| 1472 | struct sdca_function_data *function, |
| 1473 | const int id); |
| 1474 | |
| 1475 | #endif |
| 1476 | |