Search Results (592)

Triazine pesticide (atrazine and its derivatives) detection sensors have been developed to thoroughly check for the presence of these chemicals and ultimately prevent their exposure to humans. Sensitive coatings were designed by utilizing molecular imprinting technology, which aims to create artificial receptors for the detection of chlorotriazine pesticides with gravimetric transducers. Initially, imprinted polymers were developed, using acrylate and methacrylate monomers containing hydrophilic and hydrophobic side chains, specifically for atrazine, which shares a basic heterocyclic triazine structure with its structural analogs. By adjusting the ratio of the acid to the cross-linker and introducing acrylate ester as a copolymer, optimal non-covalent interactions were achieved with the hydrophobic core of triazine molecules and their amino groups. A maximum sensor response of 546 Hz (frequency shift/layer height equal to 87.36) was observed for a sensitive coating composed of 46% methacrylic acid and 54% ethylene glycol dimethacrylate, with a demonstrated layer height of 250 nm (6.25 kHz). The molecularly imprinted copolymer demonstrated fully reversible sensor responses, not only for atrazine but also for its metabolites, like des-ethyl atrazine, and structural analogs, such as propazine and terbuthylazine. The efficiency of modified molecularly imprinted polymers for targeted analytes was tested by combining them with a universally applicable quartz crystal microbalance transducer. The stable selectivity pattern of the developed sensor provides an excellent basis for a pattern recognition procedure. Full article

A tetraphenylethylene (TPE) derivative, TPEPhDAT, modified by diaminotriazine (DAT), was prepared by successive Suzuki–Miyaura coupling and ring-closing reactions. This compound exhibits aggregation-induced emission enhancement (AIEE) properties in the DMSO/MeOH system, with a fluorescence emission intensity in the aggregated state that is 5-fold higher than that of its counterpart in a dilute solution. Moreover, the DAT structure of the molecule is a good acceptor of protons; thus, the TPEPhDAT molecule exhibits acid-responsive fluorescence. TPEPhDAT was protonated by trifluoroacetic acid (TFA), leading to fluorescence quenching, which was reversibly restored by treatment with ammonia (on–off switch). Time-dependent density functional theory (TDDFT) computational studies have shown that protonation enhances the electron-withdrawing capacity of the triazine nucleus and reduces the bandgap. The protonated TPEPhDAT conformation became more distorted, and the fluorescence lifetime was attenuated, which may have produced a twisted intramolecular charge transfer (TICT) effect, leading to fluorescence redshift and quenching. MeOH can easily remove the protonated TPEPhDAT, and this acid-induced discoloration and erasable property can be applied in anti-counterfeiting. Full article

Sn-Pb perovskite solar cells, which have the advantages of low toxicity and a simple preparation process, have witnessed rapid development in recent years, with the power conversion efficiency for single-junction solar cells exceeding 23%. Nevertheless, the problems of poor crystalline quality of Sn-Pb perovskite films arising from rapid crystallization rate and facile oxidation of Sn²⁺ to Sn⁴⁺ have become key issues for the further development of Sn-Pb perovskite solar cells. Herein, we report the incorporation of triazinamide (N-(6-methyl-3-oxo-2,5-dihydro-1,2,4-Triazin-4(3H)-YL) acetamide) as an additive to regulate the crystalline growth of Sn-Pb perovskite films, resulting in films with low trap density and large grain size. The triazinamide additive effectively passivated defects in the perovskite films. As a result, the triazinamide-modified perovskite solar cells achieved a higher efficiency of 15.73%, compared with 13.32% for the control device, significantly improving device performance. Notably, the optimal triazinamide-modified perovskite solar cell maintained 72% of its initial power conversion efficiency after being stored in an air environment for nearly 300 h, while only 18% of the power conversion efficiency of the control perovskite solar cell was retained. This study proposes an effective strategy for fabricating highly efficient and stable Sn-Pb perovskite solar cells. Full article

The bisphenol A-type phthalonitrile (BAPH) was blended with the classic epoxy system E51/DDS to prepare the epoxy/phthalonitrile thermoset. The curing kinetics were investigated by differential scanning calorimetry (DSC) using the isoconversional principle, and the average activation energy (E_α) of the E51/DDS curing reaction was found to decrease from 87 kJ/mol to 68.6 kJ/mol. Combining the results of the rheological study, the promoting effect of phthalonitrile on the crosslink of epoxy/amine is confirmed. The curing reaction of the blended resin was characterized using FTIR, and the results showed that BAPH could react with DDS. The thermal behaviors of the thermosets were investigated via DMA and TGA. The glass transition temperature (T_g) is found to increase from 181 °C to 195 °C. The char yield increases from 16% to 59.6% at 800 °C in a N₂ atmosphere, which is higher than the calculated value based on the proportional principle. The AFM phase images show that there is no phase separation in the cured thermoset. The results imply that the cured epoxy/amine/phthalonitrile blend is probably a kind of copolymer. The real-time TG-MS indicated that the pyrolysis of the thermoset can be divided into two relatively independent stages, which can be assigned to the cleavage of the E51/DDS network, and the phthalocyanine/triazine/isoindoline, respectively. Full article

Tetrahedral copper(I) clusters [Cu₄(MBIZ)₄(PPh₃)₂] (2), [Cu₄(MBOZ)₄(PPh₃)₄] (6) (MBIZ = 2-mercaptobenzimidazole, MBOZ = 2-mercaptobenzoxazole) were prepared by regulation of the copper-thiolate clusters [Cu₆(MBIZ)₆] (1) and [Cu₈(MBOZ)₈I]⁻ (5) with PPh₃. With the presence of iodide anion, the regulation provided the iodide-containing clusters [Cu^I₄(MBIZ)₃(PPh₃)₃I] (3) and [Cu^I₄(MBOZ)₃(PPh₃)₃I] (7). The cyclic voltammogram of 3 in MeCN (0.1 M ⁿBu₄NPF₆, 298 K) at a scan rate of 100 mV s⁻¹ shows two oxidation processes at E_p^a = +0.11 and +0.45 V with return waves observed at E_p^c = +0.25 V (vs. Fc⁺/Fc). Complex 3 has a higher capability to lose and gain electrons in the redox processes than complexes 2, 4, 4′, 6, and 7. Its thermal stability was confirmed by thermogravimetric analysis. The catalytic performance of 3 was demonstrated by the catalytic transformation of iodobenzenes to benzonitriles using AIBN as the cyanide source. The nitrile products show potential applications in the preparation of 1,3,5-triazine compounds for organic fluorescence materials. Full article

We designed and synthesized new indolocarbazole-triazine derivatives, 9-di-tert-butyl-5,7-bis(4-(4,6-diphenyl-1,3,5-triazin-2-yl)phenyl)-5,7-dihydroindolo[2,3-b]carbazole (2TRZ-P-ICz) and 3,9-di-tert-butyl-5,7-bis(5′-(4,6-diphenyl-1,3,5-triazin-2-yl)-[1,1′:3′,1″-terphenyl]-2′-yl)-5,7-dihydroindolo[2,3-b]carbazole (2TRZ-TP-ICz), as new bipolar host materials for red phosphorescent OLEDs. In the film state, 2TRZ-P-ICz and 2TRZ-TP-ICz exhibited photoluminescence maxima at 480 nm and 488 nm, respectively. The dipole moment characteristics of the new compounds under various solvent conditions were investigated using the Lippert–Mataga equation. The results showed that the dipole moment of 2TRZ-P-ICz is 26.9D, while that of 2TRZ-TP-ICz is 21.3D. The delayed fluorescence lifetimes were 0.188 μs for 2TRZ-P-ICz and 2.080 μs for 2TRZ-TP-ICz, with 2TRZ-TP-ICz showing TADF characteristics. Additionally, 2TRZ-TP-ICz was found to have a ΔEST of less than 0.2 eV. The triplet energy levels of the newly synthesized bipolar host materials were found to be 2.72 and 2.75 eV, confirming their suitability for use in red phosphorescent OLEDs. To investigate the carrier mobility of the synthesized materials, hole-only devices and electron-only devices were fabricated and tested. The hole mobility value at 1V was found to be 3.43 × 10⁻³ cm²/Vs for 2TRZ-P-ICz and 2.16 × 10⁻³ cm²/Vs for 2TRZ-TP-ICz. For electron mobility at 1V, 2TRZ-P-ICz showed a value of 4.41 × 10⁻⁹ cm²/Vs, while 2TRZ-TP-ICz exhibited a value of 9.13 × 10⁻⁹ cm²/Vs. As a result, when the new material was used as a host in red phosphorescent OLEDs, 2TRZ-TP-ICz achieved a current efficiency of 9.92 cd/A, an external quantum efficiency of 13.7%, CIE coordinates of (0.679, 0.319), and an electroluminescence maximum wavelength of 626 nm. Full article

Modern energetic materials (EMs), e.g., nanothermite and NSTEX (Nanostructured Thermites and Explosive) compositions are attracting increasing research interest. In this work, we present the results of our investigation on the properties of a novel Ti/CuO nanothermite system doped with cellulose nitrate (NC) and 5-Nitro-1,2-dihydro-3H-1,2,4-triazin-3-one (NTO). In terms of safety parameters, the friction (40–>360 N), impact (40–>50 J) and laser irradiation sensitivity were determined for tested systems, which indicated tunable properties. The combustion velocity (up to 735 m/s), pressure parameters for combustion in closed vessel, thrust parameters and open-air combustion behaviour were measured. Moreover, in order to deeply study the impact of NTO on the combustion mechanism, SEM, DSC/TG and XRD analyses were conducted. The obtained results indicate that the Ti/CuO/NC/NTO system is extremely promising for future applications. Full article

A method for the reduction of aldehydes with pinacolborane catalyzed by pincer cobalt complexes based on a triazine backbone is developed in this paper. The presented methodology allows for the transformation of several aldehydes bearing a wide range of electron-withdrawing and electron-donating groups under mild conditions. The presented procedure allows for the direct one-step hydrolysis of the obtained intermediates to the corresponding primary alcohols. A plausible reaction mechanism is proposed. Full article

The exploration of heterocyclic compounds and their fused analogs, featuring key pharmacophore fragments like pyridine, thiophene, pyrimidine, and triazine rings, is pivotal in medicinal chemistry. These compounds possess a wide array of biological activities, making them an intriguing area of study. The quest for new neurotropic drugs among derivatives of these heterocycles with pharmacophore groups remains a significant research challenge. The aim of this research work was to develop a synthesis method for new heterocyclic compounds, evaluate their neurotropic and neuroprotective activities, study histological changes, and perform docking analysis. Classical organic synthesis methods were used in the creation of novel heterocyclic systems containing pharmacophore rings. To evaluate the neurotropic activity of these synthesized compounds, a range of biological assays were employed. Docking analysis was conducted using various software packages and methodologies. The neuroprotective activity of compound 13 was tested in seizures with and without pentylenetetrazole (PTZ) administration. Histopathological examinations were performed in different experimental groups in the hippocampus and the entorhinal cortex. As a result of chemical reactions, 16 new, tetra- and pentacyclic heterocyclic compounds were obtained. The biologically studied compounds exhibited protection against PTZ seizures as well as some psychotropic effects. The biological assays evidenced that 13 of the 16 studied compounds showed a high anticonvulsant activity by antagonism with PTZ. The toxicity of the compounds was low. According to the results of the study of psychotropic activity, it was found that the selected compounds have a sedative effect, except compound 13, which exhibited activating behavior and antianxiety effects (especially compound 13). The studied compounds exhibited antidepressant effects, especially compound 13, which is similar to diazepam. Histopathological examination showed that compound 13 produced moderate changes in the brain and exhibited neuroprotective effects in the entorhinal cortex against PTZ-induced damage, reducing gliosis and neuronal loss. Docking studies revealed that out of 16 compounds, 3 compounds bound to the γ-aminobutyric acid type A (GABA_A) receptor. Thus, the selected compounds demonstrated anticonvulsant, sedative, and activating behavior, and at the same time exhibited antianxiety and antidepressant effects. Compound 13 bound to the GABA_A receptor and exhibited antianxiety, antidepressant, and neuroprotective effects in the entorhinal cortex against PTZ-induced changes. Full article

The [ZnL(ONO₂)₂] 1 and [ZnL(NCS)₂] 2 complexes were synthesized using self-assembly of the s-triazine tridentate ligand (L) with Zn(NO₃)₂·6H₂O and Zn(ClO₄)₂·6H₂O/NH₄SCN, respectively. The Zn(II) is further coordinated by two nitrate and two isothiocyanate groups as monodentate ligands in 1 and 2, respectively. Both complexes have distorted square pyramidal coordination environments where the extent of distortion is found to be greater in 2 (τ₅ = 0.41) than in 1 (τ₅ = 0.28). Hirshfeld calculations explored the significant C···O, C···C, N···H, and O···H contacts in the molecular packing of both complexes. The energy framework analysis gave the total interaction energies of −317.8 and −353.5 kJ/mol for a single molecule in a 3.8 Å cluster of 1 and 2, respectively. The total energy diagrams exhibited a strong resemblance to the dispersion energy frameworks in both complexes. NBO charge analysis predicted the charges of the Zn(II) in complexes 1 and 2 to be 1.217 and 1.145 e, respectively. The electronic configuration of Zn1 is predicted to be [core] 4S^0.32 3d^9.98 4p^0.45 4d^0.02 5p^0.01 for 1 and [core] 4S^0.34 3d^9.97 4p^0.53 4d^0.02 for 2. The increased occupancy of the valence orbitals is attributed to the donor→acceptor interactions from the ligand groups to Zn(II). The Zn(II) complexes were examined for their cytotoxic and antimicrobial activities. Both 1 and 2 have good cytotoxic efficiency towards HCT-116 and A-549 cancerous cell lines. We found that 1 is more active (IC₅₀ = 29.53 ± 1.24 and 35.55 ± 1.69 µg/mL) than 2 (IC₅₀ = 41.25 ± 2.91 and 55.05 ± 2.87 µg/mL) against both cell lines. Also, the selectivity indices for the Zn(II) complexes are higher than one, indicating their suitability for use as anticancer agents. In addition, both complexes have broad-spectrum antimicrobial activity (IC₅₀ = 78–625 μg/mL) where the best result is found for 2 against P. vulgaris (IC₅₀ = 78 μg/mL). Its antibacterial activity is found to be good compared to gentamycin (5 μg/mL) as a positive control against this microbe. Full article

Conjugated polymers have attracted significant attention in the field of photocatalysis due to their exceptional properties, including versatile optimization, cost-effectiveness, and structure stability. Herein, two conjugated porous polymers, PhIN-CPP and ThIN-CPP, based on triazines, were meticulously designed and successfully synthesized using benzene and thiophene as building blocks. Based on UV diffuse reflection spectra, the photonic band gaps of PhIN-CPP and ThIN-CPP were calculated as 2.05 eV and 1.79 eV. The PhIN-CPP exhibited a high hydrogen evolution rate (HER) of 5359.92 μmol·g⁻¹·h⁻¹, which is 10 times higher than that of Thin-CPP (538.49 μmol·g⁻¹·h⁻¹). The remarkable disparity in the photocatalytic performance can be primarily ascribed to alterations in the band structure of the polymers, which includes its more stable benzene units, fluffier structure, larger specific surface area, most pronounced absorption occurring in the visible region and highly extended conjugation with a high density of electrons. The ΔE_ST values for PhIN-CPP and ThIN-CPP were calculated as 0.79 eV and 0.80 eV, respectively, based on DFT and TD-DFT calculations, which revealed that the incorporation of triazine units in the as-prepared CMPs could enhance the charge transfer via S1 ↔ T1 and was beneficial to the photocatalytic decomposition of H₂O. This study presents a novel concept for developing a hybrid system for preparation of H₂ by photocatalysis with effectiveness, sustainability, and economy. Full article

Peptides displaying antimicrobial properties are being regarded as useful tools to evade and combat antimicrobial resistance, a major public health challenge. Here we have addressed dendrimers, attractive molecules in pharmaceutical innovation and development displaying broad biological activity. Triazine-based dendrimers were fully synthesized in the solid phase, and their antimicrobial activity and some insights into their mechanisms of action were explored. Triazine is present in a large number of compounds with highly diverse biological targets with broad biological activities and could be an excellent branching unit to accommodate peptides. Our results show that the novel peptide dendrimers synthesized have remarkable antimicrobial activity against Gram-negative bacteria (E. coli and P. aeruginosa) and suggest that they may be useful in neutralizing the effect of efflux machinery on resistance. Full article

Ethanamizuril (EZL) is a new anticoccidial drug developed by our Shanghai Veterinary Research Institute. Since EZL is almost insoluble in water, we conducted a study to improve the solubility of EZL by forming inclusion complexes with β-cyclodextrin (β-CD) and hydroxypropyl-β-cyclodextrin (HP-β-CD). In this study, we performed molecular docking and then systematically compared the interactions of EZL with β-CD and HP-β-CD in both aqueous solution and the solid state, aiming to elucidate the solubilization effect and mechanism of cyclodextrins (CDs). The interactions were also examined in the solid state using DSC, PXRD, and FT-IR. The interactions of EZL with CDs in an aqueous solution were investigated using PSA, UV-vis spectroscopy, MS, ¹H NMR, and 2D ROESY. The results of phase solubility experiments revealed that both β-CD and HP-β-CD formed inclusion complexes with EZL in a 1:1 molar ratio. Among them, HP-β-CD exhibited higher K_f (stability constant) and CE (complexation efficiency) values as well as a stronger solubilization effect. Furthermore, the two cyclodextrins were found to interact with EZL in a similar manner. The results of our FT-IR and 2D ROESY experiments are in agreement with the theoretical results derived from molecular simulations. These results indicated that intermolecular hydrogen bonds existing between the C=O group on the triazine ring of EZL and the O-H group of CDs, as well as the hydrophobic interactions between the hydrogen on the benzene ring of EZL and the hydrogen of CDs, played crucial roles in the formation of EZL/CD inclusion complexes. The results of this study can lay the foundation for the future development of high-concentration drinking water delivery formulations for EZL. Full article

C-H borylation is a powerful strategy for the construction of C-B bonds due to the synthetic versatility of C-B bonds. Various transition metals affect the powerful functionalization of C-H bonds, of which Ir is the most common. Substrate-directed methods have enabled directed Ir-catalyzed C-H borylation at the ortho position. Amongst the powerful directing groups in Ir-catalyzed C-H borylation are N-containing carbocyclic systems. This review covers substrate-directed Ir-catalyzed ortho-C-H borylation of aromatic C(sp2)-H bonds in N-containing carbocyclic compounds, such as anilines, amides, benzyl amines, hydrazones, and triazines. Full article