Search Results (950)

The continued rise in antimicrobial resistance poses a serious threat to public health worldwide. The use of phages that can have bactericidal activity without disrupting the normal flora represents a promising alternative treatment method. This practice has been successfully applied for decades, mainly in Eastern Europe, and has recently been used as an emergency therapy for compassionate care in the United States. Here, we provide a comprehensive review of the pre-clinical and clinical applications of phage therapy concerning three major Gram-negative pathogens: Klebsiella pneumoniae, Pseudomonas aeruginosa, and Acinetobacter baumannii. The advantages and the challenges of expanding the usage of phages as an alternative or adjunctive treatment for antimicrobial-resistant bacterial infections are discussed. We emphasize the virologic complexities of using the highly adaptable phage populations as molecular tools, along with antibiotic chemical compounds, to effectively combat rapidly coevolving pathogenic bacteria in the host microenvironment. Pre-clinical studies, isolated clinical reports and a few randomized clinical trials have shown that bacteriophages can be effective in treating multidrug-resistant bacterial infections. The ability of some phages to revert the resistance against antibiotics, and possibly also against the human complement and other phages, appears to be a great advantage of phage therapy despite the inevitable emergence of phage-resistant strains. Bacteriophages (or specific phage-derived products) can enhance antimicrobial efficacy by reducing bacterial virulence via the alteration of basic bacterial structures, primarily of the cellular wall and membrane. Although several issues remain open regarding their effective clinical application, it appears that phage-based therapeutics in combination with antibiotics can provide an effective solution to the spread of antimicrobial resistance. Full article

Aluminum alloy die casting has achieved rapid development in recent years and has been widely used in all walks of life. However, due to its high pressure and high-speed technological characteristics, avoiding hole defects has become a problem of great significance in aluminum alloy die casting production. In this paper, the filling visualization dynamic characterization experiment was innovatively developed, which can directly study and analyze the influence of different injection rates on the formation and evolution of alloy flow patterns and gas-induced defects. As the injection speed increased from 1.0 m/s to 1.5 m/s, the average porosity increased from 7.49% to 9.57%, marking an increase in the number and size of the pores. According to the comparison with Anycasting, simulation results show that a liquid metal injection speed of 1.5 m/s when filling the flow front vs. the previous injection rate of 1.0 m/s caused fractures when filling at the same filling distance. Therefore, the degree of the broken splash at the flow front is more serious. Combined with the analysis of transport mechanics, the fracturing is due to the wall-attached jet effect of the liquid metal in the filling process. It is difficult for the liquid metal to adhere to the type wall in order to fuse with subsequent liquid metal to form cavity defects. With an increase in injection velocity, the microgroup volume formed via liquid breakage decreases; thus the volume of air entrapment increases, finally leading to an increase in cavity defects. Full article

Phase change energy storage microcapsules were synthesized in situ by using melamine-formaldehyde–urea co-condensation resin (MUF) as wall material, n-octadecane (C18) as core material and styryl-maleic anhydride copolymer (SMA) as emulsifier. Fourier transform infrared spectroscopy, scanning electron microscopy, differential scanning calorimetry and thermogravimetric analysis were used to study the effects of emulsifier type, emulsifier dosage, core–wall ratio and pH on the morphology and thermal properties of microcapsules. The results show that the pH of core material and the ratio of core to wall have a great influence on the performance of microcapsules. SMA emulsifiers and MUF are suitable for the encapsulation of C18. When the pH is 4.5 and the core–wall ratio is 2/1, the latent heat and encapsulation efficiency of phase transition reaches 207.3 J g⁻¹ and 84.7%, respectively. The prepared phase-change microcapsules also have good shape stability and thermal stability. Full article

Biostimulants are an important alternative to improve and promote higher efficiency in cropping systems. Although the biostimulant industry has been developing for several years, there are still areas of opportunity for new sources of biostimulants as well as new ecofriendly extraction techniques that allow for a circular economy and the reuse of waste. Lignin is a heteropolymer that constitutes about 40% of the plant cell wall. A great source of lignin is agrowastes, giving it added value. Recently, its use has been tested in agronomy as a carrier of nutrients and pesticides. Walnuts are produced on a large scale in Northern Mexico, and the shell represents between 15 and 40% of its total weight. However, to obtain this biopolymer, to date, non-environmentally friendly techniques have been used; for this reason, it is necessary to find extraction alternatives to make this proposal sustainable. In this work, the obtaining and characterization of lignin through mild extraction conditions from nutshells and its evaluation as a biostimulant on the growth of tomato seedlings are reported. Lignin was extracted by hydrolysis with a mixture of acetic acid and distilled water (65:35 v/v). The results showed that it was possible to obtain 15% (w/w) lignin using mild solvents, evidenced by thermogravimetric analysis (TGA), proton magnetic nuclear resonance (H-RMN), and infrared (IR). Subsequently, lignin solutions were prepared at different concentrations, 0, 10, 50, and 100 ppm, and applied via foliar weekly to tomato seedlings. A greater fresh weight of the stem was found with 10 and 50 ppm, and the height and the fresh biomass increased with the three concentrations (10, 50, and 100 ppm), concluding that lignin extracted from nutshells using mild conditions can act as a plant biostimulant. Full article

Hollow Enemy Towers, as iconic structures of the Ming Great Wall, are renowned for their roles in defense surveillance, weapon storage, and firearm operation. Recent studies have indicated that certain Hollow Enemy Towers along the Ji Town section of the Ming Great Wall also serve the function of Beacon Towers for beacon signaling. However, previous studies have not definitively determined if these towers were distinctively marked, nor have they provided a comprehensive account of their current distribution and original historical appearance. This paper initially examined the historical documentation of white lime markings employed on the outer walls of certain Hollow Enemy Towers, which served as Beacon Towers during the middle and late Ming periods. Utilizing multidisciplinary methodologies, this research identified remains of lime markings of the Beacon-Equipped Hollow Enemy Towers along the Ji Town section of the Ming Great Wall, illustrating their extensive distribution. We analyzed the material composition and construction techniques of the lime mortar. This analysis clarifies the scope of lime plastering on the exterior walls of these towers and offers a point of reference for restoring their original historical appearance. The results make a significant supplement to the types of signaling structures on the Great Wall, enriching existing understanding of the original appearance of the Great Wall’s historical landscape. Full article

Throughout recent years, the implementation of nanoparticles into the microstructure of additively manufactured (AM) parts has gained great attention in the material science community. The dispersion strengthening (DS) effect achieved leads to a substantial improvement in the mechanical properties of the alloy used. In this work, an ex situ approach of powder conditioning prior to the AM process as per a newly developed fluidized bed reactor (FBR) was applied to a titanium-enriched variant of the NiCu-based Alloy 400. Powders were investigated before and after FBR exposure, and it was found that the conditioning led to a significant increase in the TiN formation along grain boundaries. Manufactured to parts via laser-based powder bed fusion of metals (PBF-LB/M), the ex situ FBR approach not only revealed a superior microstructure compared to unconditioned parts but also with respect to a recently introduced in situ approach based on a gas atomization reaction synthesis (GARS). A substantially higher number of nanoparticles formed along cell walls and enabled an effective suppression of dislocation movement, resulting in excellent tensile, creep, and fatigue properties, even at elevated temperatures up to 750 °C. Such outstanding properties have never been documented for AM-processed Alloy 400, which is why the demonstrated FBR ex situ conditioning marks a promising modification route for future alloy systems. Full article

Background/Objectives: The rose myrtle Rhodomyrtus tomentosa is a medicinal plant used in traditional Asian medicine. The active compound in R. tomentosa leaf extracts is rhodomyrtone, a chiral acylphloroglucinol. Rhodomyrtone exhibits an impressive breadth of activities, including antibacterial, antiviral, antiplasmodial, immunomodulatory, and anticancer properties. Its antibacterial properties have been extensively studied. Methods: We performed a comprehensive literature review on rhodomyrtone and summarized the current knowledge about this promising acylphloroglucinol antibiotic and its diverse functions in this review. Results: Rhodomyrtone shows nano to micromolar activities against a broad range of Gram-positive pathogens, including multidrug-resistant clinical isolates, and possesses a unique mechanism of action. It increases membrane fluidity and creates hyperfluid domains that attract membrane proteins prior to forming large membrane vesicles, effectively acting as a membrane protein trap. This mechanism affects a multitude of cellular processes, including cell division and cell wall synthesis. Additionally, rhodomyrtone reduces the expression of inflammatory cytokines, such as TNF-α, IL-17A, IL1β, and IL8. Generally showing low toxicity against mammalian cells, rhodomyrtone does inhibit the proliferation of cancer cell lines, such as epidermal carcinoma cells. The primary mechanism behind this activity appears to be the downregulation of adhesion kinases and growth factors. Furthermore, rhodomyrtone has shown antioxidant activity and displays cognitive effects, such as decreasing depressive symptoms in mice. Conclusions: Rhodomyrtone shows great promise as therapeutic agent, mostly for antibacterial but also for diverse other applications. Yet, bottlenecks such as resistance development and a better understanding of mammalian cell toxictiy demand careful assessment. Full article

Periprosthetic joint infections are still a challenge in orthopedics and traumatology. Nowadays, genomics comes to the aid of diagnosis and treatment, in addition to traditional methods. Recently, a key role of the intestinal microbiota has been postulated, and great efforts are aimed at discovering its interconnection, which shows to be at different levels. Firstly, the gut microbiome influences the immune system through the gut-associated lymphoid tissue (GALT). A balanced microbiome promotes a strong immune response, which is essential to prevent all local and systemic infections, including PJI. Thus, a dysbiosis, i.e., the disruption of this system, leads to an imbalance between the various strains of microorganisms co-existing in the gut microbiome, which can result in a weakened immune system, increasing susceptibility to infections, including PJI. Additionally, the dysbiosis can result in the production of pro-inflammatory mediators that enter the systemic circulation, creating a state of chronic inflammation that can compromise the immune system’s ability to fend off infections. Furthermore, the microbiome maintains the integrity of the gut barrier, preventing the translocation of harmful bacteria and endotoxins into the bloodstream; dysbiosis can compromise this protective “wall”. In addition, the gut microbiome may harbor antibiotic-resistance genes; during antibiotic treatment for other infections or prophylaxis, these genes may be transferred to pathogenic bacteria, making the treatment of PJI more difficult. In this complex landscape, next-generation sequencing (NGS) technology can play a key role; indeed, it has revolutionized the study of the microbiome, allowing for detailed and comprehensive analysis of microbial communities. It offers insights into the functional potential and metabolic capabilities of the microbiome, studies the collective genome of the microbiome directly from environmental samples sequencing DNA without isolating individual organisms, analyzes the RNA transcripts to understand gene expression and functional activity of the microbiome, analyzes the RNA transcripts to understand gene expression and functional activity of the microbiome, investigates the metabolites produced by the microbiome and studies the entire set of proteins produced by the microbiome. NGS technology, the study of the micromyoma and its implications in the field of orthopedic trauma are innovative topics on which few publications are yet to be found in the international scientific literature. The costs are still high, the focus of research is maximum, and it will certainly change our approach to infections. Our study is an up-to-date review of the hot topic application of NGS in the study and investigation of periprosthetic infections and the microbiome. Full article

Conditioning is an important step in harvesting alfalfa hay, as squeezing and bending alfalfa stems can break down the stem fibers and accelerate the drying rate of alfalfa. The quality of alfalfa hay is directly affected by the conditioning effect. The finite element method (FEM) can quantitatively analyze the interaction relationship between alfalfa and conditioning rollers, which is of great significance for improving conditioning effects and optimizing conditioning systems. The accuracy of material engineering parameters directly affects the simulation results. Due to the small diameter and thin stem wall of alfalfa, some of its material parameters are difficult to measure or have low measurement accuracy. Based on this background, this study proposed a method for calibrating the finite element parameters of thin-walled plant stems. By conducting radial tensile, shear, bending, and radial compression tests on alfalfa stems and combining with the constitutive relationship of the material, the range of engineering parameters for the stems was preliminarily obtained. By conducting a Plackett–Burman experiment, the parameters that affect the maximum shearing force of stems were determined, including Poisson’s ratio in the isotropic plane, radial elastic modulus, and the sliding friction coefficient between the alfalfa stem and steel plate. By conducting the steepest ascent experiment and Box–Behnken experiment, the optimal values of Poisson’s ratio, radial elastic modulus, and sliding friction coefficient were obtained to be 0.42, 28.66 MPa, and 0.60, respectively. Finally, the double-shear experiment, radial compression experiment, and conditioning experiment were used to evaluate the accuracy of the parameters. The results showed that the average relative error between the maximum shear and the measured value was 0.88%, and the average relative error between the maximum radial contact force and the measured value was 2.13%. In the conditioning experiment, the load curve showed the same trend as the measured curve, and the simulation results could demonstrate the stress process and failure mode of alfalfa stems. The modeling and calibration method can effectively predict the stress and failure of alfalfa during conditioning. Full article

This study focuses on the great challenges for combined cooling and power supply on hypersonic aircrafts. To address the issues of low thermal efficiency and high fuel consumption of heat sink by the existing CO₂ supercritical Brayton cycle, a novel fuel-based CO₂ transcritical cooling and power (FCTCP) system is constructed. A steady-state simulation model is built to investigate the impacts of combustion chamber wall temperatures and fuel mass flow rates on the FCTCP system. Thermal efficiency of the CO₂ transcritical cycle reaches 25.2~32.8% under various combustion chamber wall outlet temperatures and endothermic pressures. Compared with the supercritical Brayton cycle, the thermal efficiency of novel system increases by 54.5~80.9%. It is found from deep insights into the thermodynamic results that the average heat transfer temperature difference between CO₂ and fuel is effectively reduced from 153.4 K to 16 K by split cooling of the fuel in the FCTCP system, which greatly enhances the matching of CO₂–fuel heat exchange temperatures and reduces the heat exchange loss of the system. Thermodynamic results also show that, in comparison to the supercritical Brayton cycle, the cooling capacity and power generation per unit mass flow rate of working fluid in the FCTCP system increased by 75.4~80.8% and 12.9~51.6%, respectively. The FCTCP system exhibits a substantial performance improvement, significantly enhancing the key characteristic index of the combined cooling and power supply system. This study presents a novel approach to solving the challenges of cooling and power supply in hypersonic aircrafts under limited fuel heat sink conditions, laying the groundwork for further exploration of thermal management technologies of hypersonic aircrafts. Full article

Carotenoids are tetraterpene compounds acting as precursors to vitamin A, with functions that include protecting eyesight, enhancing immunity, promoting cell growth and differentiation, and providing antioxidative benefits. Lycopene, β-carotene, and astaxanthin are particularly critical for health and have diverse applications in food, health products, and medicine. However, natural carotenoids are encased within cell structures, necessitating mechanical methods to disrupt the cell wall for their extraction and purification—a process often influenced by environmental conditions. Thus, improving the efficiency of carotenoid extraction from natural resources is of great interest. This review delves into the research progress made on the extraction processes, structures, and biological functions of carotenoids, focusing on lycopene, β-carotene, and astaxanthin. Traditional extraction methods primarily involve organic solvent-assisted mechanical crushing. With deeper research and technological advancements, more environmentally friendly solvents, advanced machinery, and suitable methods are being employed to enhance the extraction and purification of carotenoids. These improvements have significantly increased extraction efficiency, reduced preparation time, and lowered production costs, laying the groundwork for new carotenoid product developments. Full article

The region along the Great Wall is a typical dryland agricultural zone, serving as both a potential area for staple grain production and a key region for specialty crops like coarse grains and cool-climate vegetables. Studying the characteristics of drought during the spring sowing period is crucial for developing diversified planting strategies and ensuring food security. This study analyzes the drought conditions along the Great Wall from 1960 to 2023, revealing the spatial and temporal distribution of drought in the region and quantifying the impact of climate change on drought frequency and intensity. By doing so, it fills a gap in the existing drought research, which often lacks the long-term, multi-dimensional analysis of spring sowing drought characteristics. Using daily meteorological data from April 20 to May 20 during the spring sowing period between 1960 and 2023, the study employs the Meteorological Composite Drought Index (MCI) to quantitatively identify drought conditions and examine the spatial and temporal evolution of drought in the region. The results show that, on a daily scale, the frequency of mild and moderate droughts is 60.45% and 25.19%, respectively, with no occurrences of severe or extreme drought. On an annual scale, the intensity of drought and the ratio of affected stations show an increasing trend, with a decrease in mild drought frequency and an increase in moderate and severe drought occurrences. Additionally, the spatial distribution of drought frequency follows a pattern of “higher in the east than in the west” and “higher in the north than in the south”. The study also finds that the migration of drought frequency centers shows a clear temporal evolution, with the center shifting southwestward from the 1960s to the 2000s, and then moving northeastward from the 2000s to 2023. These findings provide critical data support for optimizing agricultural drought resistance strategies and offer new insights for future research on the relationship between drought and climate change. It is suggested that agricultural practices and water resource management policies should be adjusted according to the spatial migration of drought centers, with a particular focus on optimizing drought mitigation measures during the spring sowing period. Full article

Micro- and nano-bubble jet stirring, as an emerging technology, shows great potential in complex mineral sorting. Flow field characteristics and structural parameters of the gas–liquid two-phase system can lead to uneven bubble distribution inside the reaction vessel. Gas–liquid mixing uniformity is crucial for evaluating stirring effects, as increasing the contact area enhances reaction efficiency. To improve flotation process efficiency and resource recovery, further investigation into flow field characteristics and structural optimization is necessary. The internal flow field of the jet-stirred tank was analyzed using computational fluid dynamics (CFDs) with the Eulerian multiphase flow model and the Renormalization Group (RNG) k − ε turbulence model. Various operating (feeding and aerating volumes) and structural parameters (nozzle direction, height, inner diameter, and radius ratio) were simulated. Dimensionless variance is a statistical metric used to assess gas–liquid mixing uniformity. The results indicated bubbles accumulated in the middle of the vessel, leading to uneven mixing. Lower velocities resulted in low gas volume fractions, while excessively high velocities increased differences between the center and near-wall regions. Optimal mixing uniformity was achieved with a circumferential nozzle direction, 80 mm height, 5.0 mm inner diameter, and 0.55 radius ratio. Full article

It is important to determine the ventilation required in the construction of deep and long tunnels and the variation law of tunnel temperature fields to reduce the numbers of high-temperature disasters and serious accidents. Based on a tunnel project with a high ground temperature, with the help of convection heat transfer theory and the theoretical analysis and calculation method, this paper clarifies the contribution of various heat sources to the air demand during tunnel construction, and reveals the important environmental parameters that determine the ventilation value by changing the construction conditions. The results show that increasing the fresh air temperature greatly increases the required air volume, and the closer the supply air temperature is to 28 °C, the more the air volume needs to be increased. The air temperature away from the palm face is not significantly affected by changes in the supply air temperature. Adjusting the wall temperature greatly accelerates the rate of temperature growth. The supply air temperature rose from 15 to 25 °C, while the tunnel temperature at 800 m only increased by 1.5 °C. Over a 50 m range, the wall temperature rose from 35 to 60 degrees Celsius at a rate of 0.0842 to 0.219 degrees Celsius per meter. The total air volume rises and the surface heat transfer coefficient decreases as the tunnel’s cross-section increases. For every 10 m increase in the tunnel diameter, the temperature at 800 m from the tunnel face drops by about 0.5 °C. Changing the distance between the air duct and the tunnel face has little influence on the temperature distribution law. The general trend is that the farther the air duct outlet is from the tunnel face, the higher the temperature is, and the maximum difference is within the range of 50 m~250 m from the tunnel face. The maximum difference between the air temperatures at 12 m and 27 m is 0.79 °C. The geological structure and geothermal background have the greatest influence on the temperature prediction of high geothermal tunnels. The prediction results are of great significance for guiding tunnel construction, formulating cooling measures, and ensuring construction safety. Full article

This paper introduces an enzymatic approach to estimate internal mass-transfer resistances during food digestion studies. Cellulase has been used to degrade starch cell walls (where cellulose is a significant component) and reduce the internal mass-transfer resistance, so that the starch granules are released and hydrolysed by amylase, increasing the starch hydrolysis rates, as a technique for measuring the internal mass-transfer resistance of cell walls. The estimated internal mass-transfer resistances for granular starch hydrolysis in a beaker and stirrer system for simulating the food digestion range from 2.2 × 10⁷ m⁻¹ s at a stirrer speed of 100 rpm to 6.6 × 10⁷ m⁻¹ s at 200 rpm. The reaction rate constants for cellulase-treated starch are about three to eight times as great as those for starch powder. The beaker and stirrer system provides an in vitro model to quantitatively understand external mass-transfer resistance and compare mass-transfer and reaction rate kinetics in starch hydrolysis during food digestion. Particle size analysis indicates that starch cell wall degradation reduces starch granule adhesion (compared with soaked starch samples), though the primary particle sizes are similar, and increases the interfacial surface area, reducing internal mass-transfer resistance and overall mass-transfer resistance. Dimensional analysis (such as the Damköhler numbers, Da, 0.3–0.5) from this in vitro system shows that mass-transfer rates are greater than reaction rates. At the same time, SEM (scanning electron microscopy) images of starch particles indicate significant morphology changes due to the cell wall degradation. Full article