Search Results (298)

“Latxa” sheep wool is rough, and it is not used in the textile industry because the fiber diameter is high compared with other wool fibers. Nowadays, this wool is considered as disposal and, with the aim to give it value, new uses must be explored. In the current work, the “Latxa” sheep wool fiber was evaluated as poly(lactic acid) (PLA) polymer reinforcement. With the objective to optimize fiber/matrix adhesion, fibers were surface modified with peroxide. Oxidation treatment with peroxide led to chemical modifications of the wool fibers that improved the fiber/PLA adhesion, but the strength values achieved for the composites were lower compared to the neat PLA ones. The mechanical properties obtained in the current work were compared with the literature data of the PLA composites reinforced with vegetable fibers. The wool fibers showed inferior mechanical properties compared to the vegetable fiber counterparts. However, the preliminary results indicated that the incorporation of wool fibers to PLA reduced the flammability of composites. Full article

The global rise in diabetes has highlighted the urgent need for continuous, non-invasive health monitoring solutions. Traditional glucose monitoring methods, which are invasive and often inconvenient, have created a demand for alternative technologies that can offer comfort, accuracy, and real-time data. In this study, the development of a textile-based organic electrochemical transistor (OECT) is presented, designed for non-invasive glucose sensing, aiming to integrate this technology seamlessly into everyday clothing. The document details the design, optimization, and testing of a one-component textile-based OECT, featuring a porous PEDOT:PSS structure and a glucose oxidase-modified electrolyte for effective glucose detection in sweat. The research demonstrates the feasibility of using this textile-based OECT for non-invasive glucose monitoring, with enhanced sensitivity and specificity achieved through the integration of glucose oxidase within the electrolyte and the innovative porous PEDOT:PSS design. These findings suggest a significant advancement in wearable health monitoring technologies, providing a promising pathway for the development of smart textiles capable of non-invasively tracking glucose levels. Future work should focus on refining this technology for clinical use, including individual calibration for accurate blood glucose correlation and its integration into commercially available smart textiles. Full article

Rising global energy demand has intensified the need for sustainable building practices and reduced energy consumption in the construction sector. This study investigates the energy-saving potential of integrating innovative materials into building wall structures in semiarid climates. Specifically, we examine the combination of thermal insulation made from recycled textile waste and phase change materials (PCMs) in exterior walls. Using the dynamic simulation tool TRNSYS, we analyzed heat transfer through the modified wall assembly under semiarid climate conditions typical of Marrakech, Morocco. Our results show that this “bioclimatic” design significantly impacts cooling loads more than heating demands. The modified building achieved a 52% reduction in summer energy usage compared to a conventional reference building. This energy saving translates to a 39% decrease in greenhouse gas emissions. Importantly, this study confirms that this configuration maintains thermal comfort for occupants, with particular effectiveness during the hot summer months when cooling demands are highest. Full article

Textile dyes discharged into aquatic systems can have significant environmental impacts, causing water pollution and toxicity to aquatic life, and constituting a human health risk. To manage these effects, the sorption ability of wood biowaste chemically modified by Bi₂O₃ for textile dye removal was investigated. Sorbent characterization was performed using scanning electron microscopy, and elemental analysis by energy dispersive X-ray spectroscopy (SEM-EDX), X-ray diffraction (XRD), the Brunauer–Emmett–Teller (BET) method for the specific surface area, and Fourier transform infrared spectroscopy–attenuated total reflectance (FTIR-ATR). The optimization of the sorption process was carried out, and optimal parameters, such as contact time, pH, the dose of sorbent, the concentration of dye, and temperature, were defined. Also, desorption studies were conducted. Kinetics and isotherms studies were carried out, and the data fits to a pseudo-second order model (r² ≥ 0.99) and Langmuir model (r² ≥ 0.99), indicating that the process occurs in the monolayer form and the dye sorption depends on the active sites of the sorbent surface. The maximal sorption capacity of the sorbent was 434.75 mg/g. Full article

Due to industrial growth and its impact on the environment, the increasing amount of industrial waste requires a comprehensive approach aligned with the principles of sustainable development. The main goals are not only to preserve natural resources but also to encourage innovation in the reuse of waste materials. In an attempt to reduce the problems regarding waste disposal and wastewater treatment in the textile industry, fibrous textile waste was used as a starting material to obtain carbon adsorbents for the removal of pollutants from wastewater. Waste cotton and mixed yarns, mainly consisting of polysaccharide cellulose, were hydrothermally carbonized and activated with KOH to convert them into efficient carbon adsorbents for heavy metal removal from water. Characterization of carbonized material showed that after activation, an increase in specific surface area (up to 872 m²/g) and content of surface oxygen groups (6.04 mmol/g) leads to a higher affinity towards heavy metal ions, especially lead ions, and high adsorption capacity of 19.98 mg/g obtained for activated cotton yarns. The results of this research represent a contribution to the reduction of waste materials by modifying them into adsorbents, while the regeneration of adsorbents is an example of the practical application of polysaccharide-based materials in the purification of wastewater containing various heavy metal ions. Full article

Growing volumes of textile waste and heavy metal pollution of water are emerging environmental challenges. In an attempt to tackle these issues, a non-woven sorbent based on jute fibers was fabricated by recycling the textile waste from the carpet industry. The influence of contact time, concentration, pH and temperature on the sorption of lead and copper ions from aqueous solutions was studied. In order to enhance the sorption capacity of the non-woven material, in situ synthesis of polyaniline (PANI) in the presence of TiO₂ nanostructures was performed. The contribution of TiO₂ nanoparticles and TiO₂ nanotubes to the uniformity of PANI coating and overall sorption behavior was compared. Electrokinetic measurements indicated increased swelling of modified fibers. FTIR and Raman spectroscopy revealed the formation of the emeraldine base form of PANI. FESEM confirmed the creation of the uniform nanocomposite coating over jute fibers. The modification with PANI/TiO₂ nanocomposite resulted in a more than 3-fold greater sorption capacity of the material for lead ions, and a 2-fold greater absorption capacity for copper ions independently of applied TiO₂ nanostructure. The participation of both TiO₂ nanostructures in PANI synthesis resulted in excellent cover of jute fibers, but the form of TiO₂ had a negligible effect on metal ion uptake. Full article

Multifunctional composites and smart textiles are an important advancement in material science, offering a variety of capabilities that extend well beyond traditional structural functions. These advanced materials are poised to revolutionize applications across a wide range of industries, including aerospace, healthcare, military, and consumer electronics, by embedding functionalities such as structural health monitoring, signal transmission, power transfer, self-healing, and environmental sensing. This review, which draws on insights from various disciplines, including material science, engineering, and technology, explores the manufacturing techniques employed in creating multifunctional composites, focusing on modifying textiles to incorporate conductive fibers, sensors, and functional coatings. The various multifunctional capabilities that result from these modifications and manufacturing techniques are examined in detail, including structural health monitoring, power conduction, power transfer, wireless communication, power storage, energy harvesting, and data transfer. The outlook and potential for future developments are also surveyed, emphasizing the need for improved durability, scalability, and energy efficiency. Key challenges are identified, such as ensuring material compatibility, optimizing fabrication techniques, achieving reliable performance under diverse conditions, and modeling multifunctional systems. By addressing these challenges through ongoing research and further innovation, we can significantly enhance the performance and utility of systems, driving advancements in technology and improving quality of life. Full article

This article investigates the activation of surface groups of poly(ethylene terephthalate) (PET) fibers in woven fabric by hydrolysis and their functionalization with chitosan. Two types of hydrolysis were performed—alkaline and enzymatic. The alkaline hydrolysis was performed in a more sustainable process at reduced temperature and time (80 °C, 10 min) with the addition of the cationic surfactant hexadecyltrimethylammonium chloride as an accelerator. The enzymatic hydrolysis was performed using Amano Lipase A from Aspergillus niger (2 g/L enzyme, 60 °C, 60 min, pH 9). The surface of the PET fabric was functionalized with the homogenized gel of biopolymer chitosan using a pad–dry–cure process. The durability of functionalization was tested after the first and tenth washing cycle of a modified industrial washing process according to ISO 15797:2017, in which the temperature was lowered from 75 °C to 50 °C, and ε-(phthalimido) peroxyhexanoic acid (PAP) was used as an environmentally friendly agent for chemical bleaching and disinfection. The influence of the above treatments was analyzed by weight loss, tensile properties, horizontal wicking, the FTIR-ATR technique, zeta potential measurement and SEM micrographs. The results indicate better hydrophilicity and effectiveness of both types of hydrolysis, but enzymatic hydrolysis is more environmentally friendly and favorable. In addition, alkaline hydrolysis led to a 20% reduction in tensile properties, while the action of the enzyme resulted in a change of only 2%. The presence of chitosan on polyester fibers after repeated washing was confirmed on both fabrics by zeta potential and SEM micrographs. However, functionalization with chitosan on the enzymatically bioactivated surface showed better durability after 10 washing cycles than the alkaline-hydrolyzed one. The antibacterial activity of such a bio-innovative modified PET fabric is kept after the first and tenth washing cycles. In addition, applied processes can be easily introduced to any textile factory. Full article

Precise measurement of fiber diameter in animal and synthetic textiles is crucial for quality assessment and pricing; however, traditional methods often struggle with accuracy, particularly when fibers are densely packed or overlapping. Current computer vision techniques, while useful, have limitations in addressing these challenges. This paper introduces a novel deep-learning-based method to automatically generate distance maps of fiber micrographs, enabling more accurate fiber segmentation and diameter calculation. Our approach utilizes a modified U-Net architecture, trained on both real and simulated micrographs, to regress distance maps. This allows for the effective separation of individual fibers, even in complex scenarios. The model achieves a mean absolute error (MAE) of $0.1094$ and a mean square error (MSE) of $0.0711$, demonstrating its effectiveness in accurately measuring fiber diameters. This research highlights the potential of deep learning to revolutionize fiber analysis in the textile industry, offering a more precise and automated solution for quality control and pricing. Full article

This research investigated the sustainability of textile garments with integrated electronics and their potential impact on the environment. The electronic textiles (E-textiles) sector is booming, with many advancements in E-textile product designs and construction methods having been made in recent years. Although there is a rapidly increasing interest in the reusability and sustainability of textiles, work towards E-textile sustainability requires further attention. Vastly different components are combined when constructing an electronic textile product, which makes it challenging at the end of the life of these products to dispose of them in a responsible way. In this study, a teardown analysis was conducted using a structured method, which first mapped out the interactions between each component of the product with the environment, followed by using Kuusk’s sustainable framework to analyze sustainable strategies. The research provides a unique contribution to transitioning sustainability theories into practical applications in the area of E-textiles, and the method proposed in this work can be employed in modifying electronics-embedded textiles to improve longevity and reduce the negative environmental impact. The work has highlighted key points of improvement that could be applied to a series of commercial E-textile garments, as well as a prototype E-textile device. Beyond this, the work provides a systematic approach for implementing new E-textile product designs that can evaluate overall product sustainability from the design stage to material selection, construction, and the planning of the commercial approaches of a product. Full article

Porous conductive polymer structures, in particular Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) structures, are gaining in importance due to their versatile fields of application as sensors, hydrogels, or supercapacitors, to name just a few. Moreover, (porous) conducting polymers have become of interest for wearable and smart textile applications due to their biocompatibility, which enables applications with direct skin contact. Therefore, there is a huge need to investigate distinct, straightforward, and textile-compatible production methods for the fabrication of porous PEDOT:PSS structures. Here, we present novel and uncomplicated approaches to producing diverse porous PEDOT:PSS structures and characterize them thoroughly in terms of porosity, electrical resistance, and their overall appearance. Production methods comprise the incorporation of micro cellulose, the usage of a blowing agent, creating a sponge-like structure, and spraying onto a porous base substrate. This results in the fabrication of various porous structures, ranging from thin and slightly porous to thick and highly porous. Depending on the application, these structures can be modified and integrated into electronic components or wearables to serve as porous electrodes, sensors, or other functional devices. Full article

Acrylic fibres, as synthetic polymers, have been used extensively in the textile industry to create a wide variety of products, ranging from apparel and home furnishings to car rooftops and carbon fibres. Their widespread application is attributed to a combination of desirable properties, including a soft, wool-like texture, chemical stability, and robust mechanical characteristics. Furthermore, the chemical structure of acrylic fibres can be modified to imbue them with additional features, such as antimicrobial properties, fire resistance, conductivity, water repellency, and ultraviolet protection. This review explores the technological methods employed to functionalise acrylic fibres and discusses future trends in their development. Full article

The purpose of the research discussed in this article is to explore the possibility of creating hybrid soft ballistic panel (BP) package variants by integrating into their composition layers of graphene-modified para-aramid fabrics in combinations with the different ballistic Kevlar textiles to improve the durability of the first layers of the soft ballistic panel. To address this goal, the liquid-phase exfoliation (LPE) method was used for integrating dispersions into composites to solve a number of topical problems in the stages of the technological sequence development of processing methods and optimizing processing parameters in accordance with the processing specifics of aramid textiles to achieve the desired properties of modified ballistic fabric, including the provision of coating adhesion to the surface to be modified. To test the results, ballistic experiments were performed and the back-face signature (BFS) of bullet impact on a backing material was analysed according to standards. Bullet impacts on the first ballistic protective fabric layers were also studied. Full article

Ink-jet-printed silk, a premium textile material, was achieved by utilizing a bio-based gardenia blue dye. However, the sharpness of the printing pattern is difficult to control due to the limited water-retention capacity of silk. To address this issue, three polysaccharide derivatives, namely, sodium alginate (SA), low-viscosity hydroxypropyl methyl cellulose (HPMC-I), and high-viscosity hydroxypropyl methyl cellulose (HPMC-II), were employed as thickeners to modify the silk by the dipping–padding method. Firstly, the preparation of the gardenia blue ink and the rheology assessment of the thickener solution were conducted. Furthermore, the impacts of different thickeners on the micro-morphology, element composition, and hydrophilicity of the silk, along with the wetting behavior of the ink on the silk, were analyzed comparatively in order to identify an appropriate thickener for preserving pattern outlines. Lastly, the color features, color fastness, and wearing characteristics of the printed silk were discussed to evaluate the overall printing quality. Research results showed that the optimized ink formulation, comprising 12% gardenia blue, 21% alcohols, and 5.5% surfactant, met the requirements for ink-jet printing (with a viscosity of 4.48 mPa·s, a surface tension of 34.12 mN/m, and a particle size of 153 nm). The HPMC-II solution exhibited prominent shear-thinning behavior, high elasticity, and thixotropy, facilitating the achievement of an even modification effect. The treatment of the silk with HPMC-II resulted in the most notable decrease in hydrophilicity. This can be attributed to the presence of filled gaps and a dense film on the fibers’ surface after the HPMC-II treatment, as observed by scanning electron microscopy. Additionally, X-ray photoelectron spectroscopy analysis confirmed that the HPMC-II treatment introduced the highest content of hydrophobic groups on the fiber surface. The reduced hydrophilicity inhibited the excessive diffusion and penetration of gardenia blue ink, contributing to a distinct printing image and enhanced apparent color depth. Moreover, the printed silk demonstrated qualified color fastness to rubbing and soaping (exceeding grade four), a soft handle feeling, an ignorable strength loss (below 5%), and a favorable air/moisture penetrability. In general, the surface modification with the HPMC-II treatment has been proven as an effective strategy for upgrading the image quality of bio-based dye-printed silk. Full article

With recent technological advances and the growing interest in environmentally friendly fiber production processes, the textile industry is increasingly turning to the spinning of filaments from recycled raw materials in the melt spinning process as the simplest method of chemical spinning of fibers. Such processes are more efficient because the desired active particles are melt-spun together with the polymer. The study investigates the melt spinning of recycled polyamide 6 (PA 6) fibers modified with zinc oxide nanoparticles (ZnO NPs) in concentrations ranging from 0.1 to 2.0 wt% of the polymer. The extrusion process was optimized under laboratory conditions. An analysis of the effectiveness of the nanoparticle distribution and chemical composition was performed using scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR). The results of the thermal analysis show an increase in the glass transition temperature of the extruded material from 50.97 °C (raw polymer) to 51.40 °C to 57.98 °C (polymer modified with ZnO NPs) and an increase in the crystallization point from 148.19 °C to a temperature between 175.61 °C and 178.16 °C, while the molar enthalpy (ΔHm) shows a decreasing trend from 65.66 Jg⁻¹ (raw polymer) to 48.23 Jg⁻¹ (PA 6 2.0% ZnO). The FTIR spectra indicate PA 6 polymer, with a characteristic peak at the wavelength 1466 cm⁻¹, but pure ZnO and PA 6 blended with ZnO show a characteristic peak at 2322 cm⁻¹. The distribution of nanoparticles on the fiber surface is more or less randomly distributed and the different size of NPs is visible. These results are confirmed by the EDS results, which show that different concentrations of Zn are present. The mechanical stability of the extruded polymer modified with NPs is not affected by the addition of ZnO NPs, although the overall results of strength (2.56–3.22 cN/tex) and modulus of elasticity of the polymer (28.83–49.90 cN/tex) are lower as there is no drawing process at this stage of the experiment, which certainly helps to increase the final strength of the fibers. The results indicate the potential of modification with ZnO NPs for further advances in sustainable fiber production. Full article