Gels, Volume 9, Issue 5 (May 2023) – 80 articles

Silk fibroin (SF) is an excellent protein-based biomaterial produced by the degumming and purification of silk from cocoons of the Bombyx mori through alkali or enzymatic treatments. SF exhibits excellent biological properties, such as mechanical properties, biocompatibility, biodegradability, bioabsorbability, low immunogenicity, and tunability, making it a versatile material widely applied in biological fields, particularly in tissue engineering. In tissue engineering, SF is often fabricated into hydrogel form, with the advantages of added materials. SF hydrogels have mostly been studied for their use in tissue regeneration by enhancing cell activity at the tissue defect site or counteracting tissue-damage-related factors. This review focuses on SF hydrogels, firstly summarizing the fabrication and properties of SF and SF hydrogels and then detailing the regenerative effects of SF hydrogels as scaffolds in cartilage, bone, skin, cornea, teeth, and eardrum in recent years. Full article

Alginates are polysaccharides that are produced naturally and can be isolated from brown sea algae and bacteria. Sodium alginate (SA) is utilized extensively in the field of biological soft tissue repair and regeneration owing to its low cost, high biological compatibility, and quick and moderate crosslinking. In addition to their high printability, SA hydrogels have found growing popularity in tissue engineering, particularly due to the advent of 3D bioprinting. There is a developing curiosity in tissue engineering with SA-based composite hydrogels and their potential for further improvement in terms of material modification, the molding process, and their application. This has resulted in numerous productive outcomes. The use of 3D scaffolds for growing cells and tissues in tissue engineering and 3D cell culture is an innovative technique for developing in vitro culture models that mimic the in vivo environment. Especially compared to in vivo models, in vitro models were more ethical and cost-effective, and they stimulate tissue growth. This article discusses the use of sodium alginate (SA) in tissue engineering, focusing on SA modification techniques and providing a comparative examination of the properties of several SA-based hydrogels. This review also covers hydrogel preparation techniques, and a catalogue of patents covering different hydrogel formulations is also discussed. Finally, SA-based hydrogel applications and future research areas concerning SA-based hydrogels in tissue engineering were examined. Full article

Objectives: Impression materials could be a source of cross-contamination due to the presence of microorganisms from blood and saliva inside the oral cavity. Nevertheless, routinely performed post-setting disinfection could compromise the dimensional accuracy and other mechanical properties of alginates. Thus, this study aimed to evaluate detail reproduction, dimensional accuracy, tear strength, and elastic recovery of new experimentally prepared self-disinfecting dental alginates. Methods: Two antimicrobial-modified dental alginate groups were prepared by mixing alginate powder with 0.2% silver nitrate (AgNO₃ group) and a 0.2% chlorohexidine solution (CHX group) instead of pure water. Moreover, a third modified group was examined by the extraction of Boswellia sacra (BS) oleoresin using water. The extract was used to reduce silver nitrate to form silver nanoparticles (AgNPs), and the mixture was used as well in dental alginate preparation (BS + AgNP group). Dimensional accuracy and detail reproduction were examined as per the ISO 1563 standard guidelines. Specimens were prepared using a metallic mold engraved with three parallel vertical lines 20, 50, and 75 µm wide. Detail reproduction was evaluated by checking the reproducibility of the 50 µm line using a light microscope. Dimensional accuracy was assessed by measuring the change in length between defined reference points. Elastic recovery was measured according to ISO 1563:1990, in which specimens were gradually loaded and then the load was released to allow for recovery from the deformation. Tear strength was evaluated using a material testing machine until failure at a crosshead speed of 500 mm/min. Results: The recorded dimensional changes between all tested groups were insignificantly different and within the reported acceptable values (between 0.037–0.067 mm). For tear strength, there were statistically significant differences between all tested groups. Groups modified with CHX (1.17 ± 0.26 N/mm) and BS + AgNPs (1.11 ± 0.24 N/mm) showed higher tear strength values compared to the control (0.86 ± 0.23 N/mm) but were insignificant from AgNO₃ (0.94 ± 0.17 N/mm). All tested groups showed elastic recovery values that met both the ISO standard and ADA specifications for elastic impression materials and tear strength values within the acceptable documented ranges. Discussion: The CHX, silver nitrate, and green-synthesized silver nanoparticles could be promising, inexpensive alternatives for the preparation of a self-disinfecting alginate impression material without affecting its performance. Green synthesis of metal nanoparticles could be a very safe, efficient, and nontoxic method, with the advantage of having a synergistic effect between metal ions and active chemical constituents of plant extracts. Full article

Stimuli-responsive actuating hydrogels response to the external stimulus with complex deformation behaviors based on the programmable anisotropic structure design are one of the most important smart soft materials, which have great potential applications in artificial muscles, smart values, and mini-robots. However, the anisotropic structure of one actuating hydrogel can only be programmed one time, which can only provide single actuating performance, and subsequently, has severely limited their further applications. Herein, we have explored a novel SMP/hydrogel hybrid actuator through combining polyurethane shape memory polymer (PU SMP) layer and pH-responsive polyacrylic-acid (PAA) hydrogel layer by a napkin with UV-adhesive. Owing to both the super-hydrophilicity and super-lipophilicity of the cellulose-fiber based napkin, the SMP and the hydrogel can be bonded firmly by the UV-adhesive in the napkin. More importantly, this bilayer hybrid 2D sheet can be programmed by designing a different temporary shape in heat water which can be fixed easily in cool water to achieve various fixed shapes. This hybrid with a fixed temporary shape can achieve complex actuating performance based on the bi-functional synergy of temperature-triggered SMP and pH-responsive hydrogel. The relatively high modulus PU SMP achieved high to 87.19% and 88.92% shape-fixing ratio, respectively, correspond to bending and folding shapes. The hybrid actuator can actuate with the 25.71 °/min actuating speed. Most importantly, one SMP/hydrogel bi-layer hybrid sheet was repeatedly programmed at least nine times in our research to fix various temporary 1D, 2D and 3D shapes, including bending, folding and spiraling shapes. As a result, only one SMP/hydrogel hybrid can provide various complex stimuli-responsive actuations, including the reversable bending-straightening, spiraling-unspiraling. A few of the intelligent devices have been designed to simulate the movement of the natural organisms, such as bio-mimetic “paw”, “pangolin” and “octopus”. This work has developed a new SMP/hydrogel hybrid with excellent multi-repeatable (≥9 times) programmability for high-level complex actuations, including the 1D to 2D bending and the 2D to 3D spiraling actuations, which also provides a new strategy to design other new soft intelligent materials and systems. Full article

Following the application of polymer flooding in Daqing Oilfield, the heterogeneity between different layers has intensified, resulting in the formation of more favorable seepage channels and cross-flow of displacement fluids. Consequently, the circulation efficiency has decreased, necessitating the exploration of methods to enhance oil recovery. This paper focuses on experimental research utilizing a newly developed precrosslinked particle gel (PPG) combined with alkali surfactant polymer (ASP) to create a heterogeneous composite system. This study aims to improve the efficiency of heterogeneous system flooding after polymer flooding. The addition of PPG particles enhances the viscoelasticity of the ASP system, reduces the interfacial tension between the heterogeneous system and crude oil, and provides excellent stability. The heterogeneous system has high resistance and residual resistance coefficients during the migration process in a long core model, achieving an improvement rate of up to 90.1% under the permeability ratio of 9 between high and low permeability layers. Employing heterogeneous system flooding after polymer flooding can increase oil recovery by 14.6%. Furthermore, the oil recovery rate of low permeability layers can reach 28.6%. The experimental results confirm that the application of PPG/ASP heterogeneous flooding after polymer flooding can effectively plug high-flow seepage channels and improve oil washing efficiency. These findings hold significant implications for further reservoir development after polymer flooding. Full article

Gamma radiation technique for the preparation of pure hydrogels is gaining popularity worldwide. Superabsorbent hydrogels play vital roles in different fields of application. The present work mainly focuses on the preparation and characterization of 2,3-Dimethylacrylic acid-(2-Acrylamido-2-methyl-1-propane sulfonic acid) (DMAA–AMPSA) superabsorbent hydrogel by applying gamma radiation and optimization of the proper dose. To prepare DMAA–AMPSA hydrogel, different doses ranging from 2 kGy to 30 kGy were imparted on the blend aqueous solution of the monomers. The equilibrium swelling increases with increasing radiation dose, followed by decreasing after reaching a certain level, and the highest result is found to be 26,324.9% at 10 kGy. Fourier Transform Infrared (FTIR) and Nuclear Magnetic Resonance (NMR) spectroscopy confirmed the formation of co-polymer by showing the characteristic functional groups and proton environment of the gel. X-ray Diffraction (XRD) pattern indicates the crystalline/amorphous nature of the gel. The Differential Scanning Calorimetry (DSC) and Thermogravimetry Analysis (TGA) revealed the thermal stability of the gel. The surface morphology and constitutional elements were analyzed and confirmed by Scanning Electron Microscopy (SEM) equipped with Energy Dispersive Spectroscopy (EDS). Finally, it can be stated that hydrogels can be usable in metal adsorption, drug delivery, and other relevant fields. Full article

Natural polysaccharides are highly attractive biopolymers recommended for medical applications due to their low cytotoxicity and hydrophilicity. Polysaccharides and their derivatives are also suitable for additive manufacturing, a process in which various customized geometries of 3D structures/scaffolds can be achieved. Polysaccharide-based hydrogel materials are widely used in 3D hydrogel printing of tissue substitutes. In this context, our goal was to obtain printable hydrogel nanocomposites by adding silica nanoparticles to a microbial polysaccharide’s polymer network. Several amounts of silica nanoparticles were added to the biopolymer, and their effects on the morpho-structural characteristics of the resulting nanocomposite hydrogel inks and subsequent 3D printed constructs were studied. FTIR, TGA, and microscopy analysis were used to investigate the resulting crosslinked structures. Assessment of the swelling characteristics and mechanical stability of the nanocomposite materials in a wet state was also conducted. The salecan-based hydrogels displayed excellent biocompatibility and could be employed for biomedical purposes, according to the results of the MTT, LDH, and Live/Dead tests. The innovative, crosslinked, nanocomposite materials are recommended for use in regenerative medicine. Full article

ZnO is one of the most studied oxides due to its nontoxic nature and remarkable properties. It has antibacterial and UV-protection properties, high thermal conductivity, and high refractive index. Various ways have been used to synthesize and fabricate coinage metals doped ZnO, but the sol-gel technique has received a lot of interest because of its safety, low cost, and facile deposition equipment. Coinage metals are represented by the three nonradioactive elements of group 11 of the periodic table: gold, silver, and copper. This paper, which was motivated by the lack of reviews on the topic, provides a summary of the synthesis of Cu, Ag, and Au-doped ZnO nanostructures with an emphasis on the sol-gel process and identifies the numerous factors that affect the morphological, structural, optical, electrical, and magnetic properties of the produced materials. This is accomplished by tabulating and discussing a summary of a number of parameters and applications that were published in the existing literature over the previous five years (2017–2022). The main applications being pursued involve biomaterials, photocatalysts, energy storage materials, and microelectronics. This review ought to serve as a helpful reference point for researchers looking into the many physicochemical characteristics of coinage metals doped ZnO, as well as how these characteristics vary according to the conditions under which experiments are conducted. Full article

Although titanium and titanium alloys have become the preferred materials for various medical implants, surface modification technology still needs to be strengthened in order to adapt to the complex physiological environment of the human body. Compared with physical or chemical modification methods, biochemical modification, such as the introduction of functional hydrogel coating on implants, can fix biomolecules such as proteins, peptides, growth factors, polysaccharides, or nucleotides on the surface of the implants, so that they can directly participate in biological processes; regulate cell adhesion, proliferation, migration, and differentiation; and improve the biological activity on the surface of the implants. This review begins with a look at common substrate materials for hydrogel coatings on implant surfaces, including natural polymers such as collagen, gelatin, chitosan, and alginate, and synthetic materials such as polyvinyl alcohol, polyacrylamide, polyethylene glycol, and polyacrylic acid. Then, the common construction methods of hydrogel coating (electrochemical method, sol–gel method and layer-by-layer self-assembly method) are introduced. Finally, five aspects of the enhancement effect of hydrogel coating on the surface bioactivity of titanium and titanium alloy implants are described: osseointegration, angiogenesis, macrophage polarization, antibacterial effects, and drug delivery. In this paper, we also summarize the latest research progress and point out the future research direction. After searching, no previous relevant literature reporting this information was found. Full article

Two formulations based on diclofenac sodium salt encapsulated into a chitosan hydrogel were designed and prepared, and their drug release was investigated by combining in vitro results with mathematical modeling. To understand how the pattern of drug encapsulation impacted its release, the formulations were supramolecularly and morphologically characterized by scanning electron microscopy and polarized light microscopy, respectively. The mechanism of diclofenac release was assessed by using a mathematical model based on the multifractal theory of motion. Various drug-delivery mechanisms, such as Fickian- and non-Fickian-type diffusion, were shown to be fundamental mechanisms. More precisely, in a case of multifractal one-dimensional drug diffusion in a controlled-release polymer–drug system (i.e., in the form of a plane with a certain thickness), a solution that allowed the model’s validation through the obtained experimental data was established. The present research reveals possible new perspectives, for example in the prevention of intrauterine adhesions occurring through endometrial inflammation and other pathologies with an inflammatory mechanism background, such as periodontal diseases, and also therapeutic potential beyond the anti-inflammatory action of diclofenac as an anticancer agent, with a role in cell cycle regulation and apoptosis, using this type of drug-delivery system. Full article

Hydrogels have many useful physicochemical properties which, in combination with their biocompatibility, suggest their application as a drug delivery system for the local and prorogated release of drugs. However, their drug-absorption capacity is limited because of the gel net’s poor adsorption of hydrophilic molecules and in particular, hydrophobic molecules. The absorption capacity of hydrogels can be increased with the incorporation of nanoparticles due to their huge surface area. In this review, composite hydrogels (physical, covalent and injectable) with included hydrophobic and hydrophilic nanoparticles are considered as suitable for use as carriers of anticancer chemotherapeutics. The main focus is given to the surface properties of the nanoparticles (hydrophilicity/hydrophobicity and surface electric charge) formed from metal and dielectric substances: metals (gold, silver), metal-oxides (iron, aluminum, titanium, zirconium), silicates (quartz) and carbon (graphene). The physicochemical properties of the nanoparticles are emphasized in order to assist researchers in choosing appropriate nanoparticles for the adsorption of drugs with hydrophilic and hydrophobic organic molecules. Full article

Problems with silver carp protein (SCP) include a strong fishy odor, low gel strength of SCP surimi, and susceptibility to gel degradation. The objective of this study was to improve the gel quality of SCP. The effects of the addition of native soy protein isolate (SPI) and SPI subjected to papain-restricted hydrolysis on the gel characteristics and structural features of SCP were studied. The β-sheet structures in SPI increased after papain treatment. SPI treated with papain was crosslinked with SCP using glutamine transaminase (TG) to form a composite gel. Compared with the control, the addition of modified SPI increased the hardness, springiness, chewiness, cohesiveness, and water-holding capacity (WHC) of the protein gel (p < 0.05). In particular, the effects were most significant when the degree of SPI hydrolysis (DH) was 0.5% (i.e., gel sample M-2). The molecular force results demonstrated that hydrogen bonding, disulfide bonding, and hydrophobic association are important molecular forces in gel formation. The addition of the modified SPI increases the number of hydrogen bonds and the disulfide bonds. Scanning electron microscopy (SEM) analysis showed that the papain modifications allowed the formation of a composite gel with a complex, continuous, and uniform gel structure. However, the control of the DH is important as additional enzymatic hydrolysis of SPI decreased TG crosslinking. Overall, modified SPI has the potential to improve SCP gel texture and WHC. Full article

Graphene oxide aerogel (GOA) has wide application prospects due to its low density and high porosity. However, the poor mechanical properties and unstable structure of GOA have limited its practical applications. In this study, polyethyleneimide (PEI) was used to graft onto the surface of GO and carbon nanotubes (CNTs) to improve compatibility with polymers. Composite GOA was prepared by adding styrene-butadiene latex (SBL) to the modified GO and CNTs. The synergistic effect of PEI and SBL, resulted in an aerogel with excellent mechanical properties, compressive resistance, and structural stability. When the ratio of SBL to GO and GO to CNTs was 2:1 and 7:3, respectively, the obtained aerogel performance was the best, and the maximum compressive stress was 784.35% higher than that of GOA. The graft of PEI on the surface of GO and CNT could improve the mechanical properties of the aerogel, with greater improvements observed with grafting onto the surface of GO. Compared with GO/CNT/SBL aerogel without PEI grafting, the maximum stress of GO/CNT–PEI/SBL aerogel increased by 5.57%, that of GO–PEI/CNT/SBL aerogel increased by 20.25%, and that of GO–PEI/CNT–PEI/SBL aerogel increased by 28.99%. This work not only provided a possibility for the practical application of aerogel, but also steered the research of GOA in a new direction. Full article

The enervating side effects of chemotherapeutic drugs have necessitated the use of targeted drug delivery in cancer therapy. To that end, thermoresponsive hydrogels have been employed to improve the accumulation and maintenance of drug release at the tumour site. Despite their efficiency, very few thermoresponsive hydrogel-based drugs have undergone clinical trials, and even fewer have received FDA approval for cancer treatment. This review discusses the challenges of designing thermoresponsive hydrogels for cancer treatment and offers suggestions for these challenges as available in the literature. Furthermore, the argument for drug accumulation is challenged by the revelation of structural and functional barriers in tumours that may not support targeted drug release from hydrogels. Other highlights involve the demanding preparation process of thermoresponsive hydrogels, which often involves poor drug loading and difficulties in controlling the lower critical solution temperature and gelation kinetics. Additionally, the shortcomings in the administration process of thermosensitive hydrogels are examined, and special insight into the injectable thermosensitive hydrogels that reached clinical trials for cancer treatment is provided. Full article

Neuropathic pain is a complex and debilitating condition that affects millions of people worldwide. While several treatment options are available, they often have limited efficacy and are associated with adverse effects. In recent years, gels have emerged as a promising option for the treatment of neuropathic pain. Inclusion of various nanocarriers, such as cubosomes and niosomes, into gels results in pharmaceutical forms with higher drug stability and increased drug penetration into tissues compared to products currently marketed for the treatment of neuropathic pain. Furthermore, these compounds usually provide sustained drug release and are biocompatible and biodegradable, which makes them a safe option for drug delivery. The purpose of this narrative review was to provide a comprehensive analysis of the current state of the field and identify potential directions for future research in the development of effective and safe gels for the treatment of neuropathic pain, ultimately improving the quality of life for patients suffering from neuropathic pain. Full article

Water pollution is a significant environmental issue that has emerged because of industrial and economic growth. Human activities such as industrial, agricultural, and technological practices have increased the levels of pollutants in the environment, causing harm to both the environment and public health. Dyes and heavy metals are major contributors to water pollution. Organic dyes are a major concern because of their stability in water and their potential to absorb sunlight, increasing the temperature and disrupting the ecological balance. The presence of heavy metals in the production of textile dyes adds to the toxicity of the wastewater. Heavy metals are a global issue that can harm both human health and the environment and are mainly caused by urbanization and industrialization. To address this issue, researchers have focused on developing effective water treatment procedures, including adsorption, precipitation, and filtration. Among these methods, adsorption is a simple, efficient, and cheap method for removing organic dyes from water. Aerogels have shown potential as a promising adsorbent material because of their low density, high porosity, high surface area, low thermal and electrical conductivity, and ability to respond to external stimuli. Biomaterials such as cellulose, starch, chitosan, chitin, carrageenan, and graphene have been extensively studied for the production of sustainable aerogels for water treatment. Cellulose, which is abundant in nature, has received significant attention in recent years. This review highlights the potential of cellulose-based aerogels as a sustainable and efficient material for removing dyes and heavy metals from water during the treatment process. Full article

Sialolithiasis mainly affects the oral salivary glands due to the presence of small stones that obstruct the secretion of saliva. The treatment and control of pain and inflammation during the course of this pathology is essential to guarantee the patient’s comfort. For this reason, a ketorolac calcium cross-linked alginate hydrogel was developed, and it was then applied in the area of the buccal cavity. The formulation was characterized (swelling and degradation profile, extrusion, extensibility, surface morphology, viscosity, and drug release). The drug release was studied ex vivo in static Franz cells and with a dynamic ex vivo method under artificial saliva continuous flow. The product exhibits adequate physicochemical properties considering the intended purpose, and the drug concentrations retained in the mucosa were high enough to deliver a therapeutic local concentration able to reduce the pain associated with the patient’s conditions. The results confirmed the suitability of the formulation for application in the mouth. Full article

Background: Ventilator-associated pneumonia (VAP) is a common and genuine complication in fundamentally sick patients accepting mechanical ventilation. Silver nitrate sol-gel (SN) has been proposed as a potential preventative measure against VAP. Be that as it may, the arrangement of SN with distinctive concentrations and pH values remains a basic factor influencing its effectiveness. Methods: Silver nitrate sol-gel was arranged with distinctive concentrations (0.1852%, 0.03496%, 0.1852%, and 0.01968%) and pH values (8.5, 7.0, 8.0, and 5.0) separately. The antimicrobial action of the silver nitrate and NaOH arrangements were assessed against Escherichia coli as a reference strain. The thickness and pH of the arrangements were measured, and biocompatibility tests were performed on the coating tube. The auxiliary changes in the endotracheal tube (ETT) tests after treatment were analyzed utilizing electron microscopy (SEM) and transmission electron microscopy (TEM). Results: The pH estimations of the diverse arrangements showed that the pH values shifted depending on the test conditions, with pH values extending from 5.0 to 8.5. The consistency estimations of the arrangements showed that the thickness values expanded as the pH values drew closer to 7.5 and diminished when the pH values went over 7.5. The antimicrobial action of the silver nitrate and NaOH arrangements were successful against Escherichia coli, with microbial checks decreasing in concentration (0.03496%, 0.1852% (pH: 8), and 0.01968%). The biocompatibility tests revealed tall cell reasonability rates, demonstrating that the coating tube was secure for therapeutic utilization and did not hurt typical cells. The SEM and TEM investigation gave visual proof of the antibacterial impacts of the silver nitrate and NaOH arrangements on the bacterial surface or interior of the bacterial cells. Moreover, the investigation revealed that a concentration of 0.03496% was the foremost successful in hindering the development of ETT bacterial colonization at the nanoscale level. Conclusions: We propose that cautious control and alteration of the pH and thickness of the arrangements are essential to guaranteeing the reproducibility and quality of the sol-gel materials. The silver nitrate and NaOH arrangements may serve as a potential preventative degree against VAP in sick patients, with a concentration of 0.03496% appearing to show the most elevated viability. The coating tube may serve as a secure and viable preventative measure against VAP in sick patients. Further investigation is required to optimize the concentration and introduction time of the arrangements to maximize their adequacy in avoiding VAP in real-world clinical settings. Full article

Polymer gel materials are formed by physically crosslinking and chemically crosslinking to form a gel network system with high mechanical properties and reversible performance. Due to their excellent mechanical properties and intelligence, polymer gel materials are widely used in biomedical, tissue engineering, artificial intelligence, firefighting and other fields. Given the current research status of polymer gels at home and abroad and the current application status of oilfield drilling, this paper reviews the mechanism of polymer gels formed by physically crosslinking and chemically crosslinking, summarizes the performance characteristics and the mechanism of action of polymer gels formed by non-covalent bonding, such as hydrophobic bonding, hydrogen bonding, electrostatic and Van der Waals interactions interactions, and covalent bonding such as imine bonding, acylhydrazone bonding and Diels-Alder reaction. The current status and outlook of the application of polymer gels in drilling fluids, fracturing fluids and enhanced oil recovery are also introduced. We expand the application fields of polymer gel materials and promote the development of polymer gel materials in a more intelligent direction. Full article

Oral candidiasis encompasses fungal infections of the tongue and other oral mucosal sites with fungal overgrowth and its invasion of superficial oral tissues. Borneol was assessed in this research as the matrix-forming agent of clotrimazole-loaded in situ forming gel (ISG) comprising clove oil as the co-active agent and N-methyl pyrrolidone (NMP) as a solvent. Their physicochemical properties, including pH, density, viscosity, surface tension, contact angle, water tolerance, gel formation, and drug release/permeation, were determined. Their antimicrobial activities were tested using agar cup diffusion. The pH values of clotrimazole-loaded borneol-based ISGs were in the range of 5.59–6.61, which are close to the pH of 6.8 of saliva. Increasing the borneol content in the formulation slightly decreased the density, surface tension, water tolerance, and spray angle but increased the viscosity and gel formation. The borneol matrix formation from NMP removal promoted a significantly (p < 0.05) higher contact angle of the borneol-loaded ISGs on agarose gel and porcine buccal mucosa than those of all borneol-free solutions. Clotrimazole-loaded ISG containing 40% borneol demonstrated appropriate physicochemical properties and rapid gel formation at microscopic and macroscopic levels. In addition, it prolonged drug release with a maximum flux of 370 µg·cm⁻² at 2 days. The borneol matrix generated from this ISG obsentively controlled the drug penetration through the porcine buccal membrane. Most clotrimazole amounts still remained in formulation at the donor part and then the buccal membrane and receiving medium, repectively. Therefore, the borneol matrix extended the drug release and penetration through the buccal membrane efficiently. Some accumulated clotrimazole in tissue should exhibit its potential antifugal activity against microbes invading the host tissue. The other predominant drug release into the saliva of the oral cavity should influence the pathogen of oropharyngeal candidiasis. Clotrimazole-loaded ISG demonstrated efficacious inhibition of growth against S. aureus, E. coli, C. albicans, C. krusei, C. Lusitaniae, and C. tropicalis. Consequently, the clotrimazole-loaded ISG exhibited great potential as a drug delivery system for oropharyngeal candidiasis treatment by localized spraying. Full article

An efficient redox initiating system, ceric ammonium nitrate/nitric acid, has been employed for the first time to carry out photo-induced graft copolymerization of acrylonitrile (AN) onto sodium salt of partially carboxymethylated sodium alginate, having an average degree of substitution value to be 1.10. The photo-grafting reaction conditions for maximum grafting have been systematically optimized by varying the reaction variables such as reaction time, temperature, the concentration of acrylonitrile monomer, ceric ammonium nitrate, and nitric acid, as well as the amount of the backbone. The optimum reaction conditions are obtained with a reaction time of 4 h, reaction temperature of 30 °C, acrylonitrile monomer concentration of 0.152 mol/L, initiator concentration of 5 × 10⁻³ mol/L, nitric acid concentration of 0.20 mol/L, amount of backbone of 0.20 (dry basis) and the total volume of the reaction system of 150 mL. The highest percentage of grafting (%G) and grafting efficiency (%GE) achieved are 316.53% and 99.31%, respectively. The optimally prepared graft copolymer, sodium salt of partially carboxymethylated sodium alginate-g-polyacrylonitrile (%G = 316.53), has been hydrolyzed in an alkaline medium (0.7N NaOH, 90–95 °C for ~2.5 h) to obtain the superabsorbent hydrogel, H–Na–PCMSA–g–PAN. The chemical structure, thermal characteristics, and morphology of the products have also been studied. Full article

Hyaluronic acid is one of the most important ingredients in dermal fillers, where it is often cross-linked to gain more favorable rheological properties and to improve the implant duration. Poly(ethylene glycol) diglycidyl ether (PEGDE) has been recently introduced as a crosslinker because of its very similar chemical reactivity with the most-used crosslinker BDDE, while giving special rheological properties. Monitoring the amount of the crosslinker residues in the final device is always necessary, but in the case of PEGDE, no methods are available in literature. Here, we present an HPLC-QTOF method, validated according to the guidelines of the International Council on Harmonization, which enables the efficient routine examination of the PEGDE content in HA hydrogels. Full article

There are various types of gel materials used in a wide range of fields, and their gelation mechanisms are extremely diverse. Furthermore, in the case of hydrogels, there exist some difficulties in understanding complicated molecular mechanisms especially with water molecules interacting through hydrogen bonding as solvents. In the present work, the molecular mechanism of the structural formation of fibrous super-molecular gel by the low molecular weight gelator, N-oleyl lactobionamide/water mixture was elucidated using the broadband dielectric spectroscopy (BDS) method. The dynamic behaviors observed for the solute and water molecules indicated hierarchical structure formation processes in various time scales. The relaxation curves obtained at various temperatures in the cooling and heating processes showed relaxation processes respectively reflecting the dynamic behaviors of water molecules in the 10 GHz frequency region, solute molecules interacting with water in MHz region, and ion-reflecting structures of the sample and electrode in kHz region. These relaxation processes, characterized by the relaxation parameters, showed remarkable changes around the sol–gel transition temperature, 37.8 °C, determined by the falling ball method and over the temperature range, around 53 °C. The latter change suggested a structure formation of rod micelles appearing as precursors before cross-linking into the three-dimensional network of the supramolecular gels. These results clearly demonstrate how effective relaxation parameter analysis is for understanding the gelation mechanism in detail. Full article

The water absorption measurements of a novel superabsorbent anionic hydrogel, H-Na-PCMSA-g-PAN, has been reported first time in water with a poor conductivity, 0.15 M saline (NaCl, CaCl_2, and AlCl₃) solutions, and simulated urine (SU) solutions at various times. The hydrogel has been prepared by the saponification of the graft copolymer, Na-PCMSA-g-PAN (%G = 316.53, %GE = 99.31). Results indicated that as compared to the swelling capacity values evaluated in water with a poor conductivity, the ability of the hydrogel to swell in various saline solutions with the same concentration is significantly reduced at all different durations. The swelling tends to be Na⁺ > Ca²⁺ > Al³⁺ at the same saline concentration in the solution. Studies of the absorbency in various aqueous saline (NaCl) solutions also revealed that the swelling capacity decreased as the ionic strength of the swelling medium rose, which is consistent with the experimental results and Flory’s equation. Furthermore, the experimental results strongly suggested that second-order kinetics governs the swelling process of the hydrogel in various swelling media. The swelling characteristics and equilibrium water contents for the hydrogel in various swelling media have also been researched. The hydrogel samples have been successfully characterized by FTIR to show the change in chemical environment to COO⁻ and CONH₂ groups after swelling in different swelling media. The samples have also been characterized by SEM technique. Full article

In previous work of this group, a structural lightweight concrete was developed by embedding silica aerogel granules in a high-strength cement matrix. This concrete, called high-performance aerogel concrete (HPAC), is a lightweight building material characterized by its simultaneous high compressive strength and very low thermal conductivity. Besides these features, high sound absorption, diffusion permeability, water repellence and fire resistance qualify HPAC as an interesting material for the construction of single-leaf exterior walls without any further insulation. During the development of HPAC, the type of silica aerogel was found to majorly influence both fresh and hardened concrete properties. To clarify these effects, a systematic comparison of SiO₂ aerogel granules with different levels of hydrophobicity as well as different synthesis methods was conducted in the present study. The granules were analyzed for their chemical and physical properties as well as their compatibility in HPAC mixtures. These experiments included determinations of pore size distribution, thermal stability, porosity, specific surface and hydrophobicity, as well as fresh/hardened concrete experiments such as measurements of compressive strength, flexural bending strength, thermal conductivity and shrinking behavior. It was found that the type of aerogel has a major influence on the fresh and hardened concrete properties of HPAC, particularly compressive strength and shrinkage behavior, whereas the effect on thermal conductivity is not very pronounced. Full article

The persistent challenge of removing viscous oil on water surfaces continues to pose a major concern and requires immediate attention. Here, a novel solution has been introduced in the form of a superhydrophobic/superoleophilic PDMS/SiO₂ aerogel fabric gathering device (SFGD). The SFGD is based on the adhesive and kinematic viscosity properties of oil, enabling self-driven collection of floating oil on the water surface. The SFGD is able to spontaneously capture the floating oil, selectively filter it, and sustainably collect it into its porous fabric interior through the synergistic effects of surface tension, gravity, and liquid pressure. This eliminates the need for auxiliary operations such as pumping, pouring, or squeezing. The SFGD demonstrates exceptional average recovery efficiencies of 94% for oils with viscosities ranging from 10 to 1000 mPa·s at room temperature, including dimethylsilicone oil, soybean oil, and machine oil. With its facile design, ease of fabrication, high recovery efficiency, excellent reclaiming capabilities, and scalability for multiple oil mixtures, the SFGD represents a significant advancement in the separation of immiscible oil/water mixtures of various viscosities and brings the separation process one step closer to practical application. Full article

The production of customized polymeric hydrogels in the form of 3D scaffolds with application in bone tissue engineering is currently a topic of great interest. Based on gelatin methacryloyl (GelMa) as one of the most popular used biomaterials, GelMa with two different methacryloylation degrees (DM) was obtained, to achieve crosslinked polymer networks by photoinitiated radical polymerization. In this work, we present the obtention of new 3D foamed scaffolds based on ternary copolymers of GelMa with vinylpyrrolidone (VP) and 2-hydroxyethylmethacrylate (HEMA). All biopolymers obtained in this work were characterized by infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA), whose results confirm the presence of all copolymers in the crosslinked biomaterial. In addition, scanning electron microscopy (SEM) pictures were obtained verifying the presence of the porosity created by freeze-drying process. In addition, the variation in its swelling degree and its enzymatic degradation in vitro was analyzed as a function of the different copolymers obtained. This has allowed us to observe good control of the variation in these properties described above in a simple way by varying the composition of the different comonomers used. Finally, with these concepts in mind, biopolymers obtained were tested through assessment of several biological parameters such as cell viability and differentiation with MC3T3-E1 pre-osteoblastic cell line. Results obtained show that these biopolymers maintain good results in terms of cell viability and differentiation, along with tunable properties in terms of hydrophilic character, mechanical properties and enzymatic degradation. Full article

The mechanical strength of dispersed particle gels (DPGs), which can be directly characterized by Young’s modulus, is an important parameter affecting reservoir regulation performance. However, the effect of reservoir conditions on the mechanical strength of DPGs, as well as the desired range of mechanical strength for optimum reservoir regulation performance, have not been systematically studied. In this paper, DPG particles with different Young’s moduli were prepared and their corresponding migration performances, profile control capacities and enhanced oil recovery abilities were studied by simulated core experiments. The results showed that with increase in Young’s modulus, the DPG particles exhibited improved performance in profile control as well as enhanced oil recovery. However, only the DPG particles with a modulus range of 0.19–0.762 kPa could achieve both adequate blockage in large pore throats and migration to deep reservoirs through deformation. Considering the material costs, applying DPG particles with moduli within the range of 0.19–0.297 kPa (polymer concentration: 0.25–0.4%; cross-linker concentration: 0.7–0.9%) would ensure optimum reservoir control performance. Direct evidence for the temperature and salt resistance of DPG particles was also obtained. When aged in reservoir conditions below 100 °C and at a salinity of 10 × 10⁴ mg·L⁻¹, the Young’s modulus values of the DPG particle systems increased moderately with temperature or salinity, indicating a favorable impact of reservoir conditions on the reservoir regulation abilities of DPG particles. The studies in this paper indicated that the practical reservoir regulation performances of DPGs can be improved by adjusting the mechanical strength, providing basic theoretical guidance for the application of DPGs in efficient oilfield development. Full article