Lead Regulations
On this page:
Lead in Paint, Dust and Soil
Title IV of the Toxic Substances Control Act (TSCA), as well as other authorities in the Residential Lead-Based Paint Hazard Reduction Act of 1992, directs EPA to regulate lead-based paint hazards. Read about EPA regulations on lead in paint, dust and soil.
- 40 CFR Part 745 - Lead-Based Paint Poisoning Prevention in Certain Residential Structures
- Lead Renovation, Repair and Painting Program (RRP) Rule: This requires that those engaged in RRP activities in homes or child-occupied facilities (such as day care centers and kindergartens) built prior to 1978 be trained and certified in lead-safe work practices, and use these work practices to guard against lead contamination. It also requires that contractors provide information on lead safety prior to beginning work.
- Lead Abatement Program: Training and Certification Program for Lead-based Paint Activities (TSCA sections 402/404): This requires that those engaged in lead abatements, risk assessments and inspections in homes or child-occupied facilities (such as day care centers and kindergartens) built prior to 1978 be trained and certified in specific practices to ensure accuracy and safety.
- Residential Lead-Based Paint Disclosure Program (Section 1018 of Title X): This requires that potential buyers and renters of housing built prior to 1978 receive certain information about lead and lead hazards in the residence prior to becoming obligated to buy or rent, and provides the opportunity for an independent lead inspection for buyers.
- Residential Hazard Standards and Clearance Levels for Lead in Paint, Dust and Soil (TSCA Section 403) : This sets standards for dangerous levels of lead in paint, household dust, and residential soil, as well as the corresponding post-abatement clearance levels.
See also:
- Additional rules: Lead in paint, dust and soil
- Enforcement information: Lead in paint, dust and soil
- Compliance information: Lead in paint, dust and soil
- Policies and guidance: Lead in paint, dust and soil
Lead in Water
Lead in water is regulated under both the Clean Water Act and Safe Drinking Water Act.
Clean Water Act
Direct Discharges of Lead into Water
The CWA prohibits anyone from discharging pollutants, including lead, through a point source into a water of the United States unless they have a National Pollutant Discharge Elimination System (NPDES) permit. NPDES permits contain limits on what you can discharge, monitoring and reporting requirements, and other provisions to ensure that the discharge does not hurt water quality or people's health. As appropriate, NPDES permits must contain:
- Technology-Based Effluent Limitation Guidelines: Effluent guidelines are technology-based regulations to control industrial wastewater discharges. The guidelines are based on the performance of treatment and control technologies. Currently, EPA has issued 19 industry effluent guideline regulations that contain a limit for lead discharges.
- Water Quality-Based Effluent Limitations (WQBELs): A WQBEL is a value determined by selecting the most stringent of the effluent limits calculated using all applicable state ambient water quality criteria (e.g., aquatic life, human health, and wildlife) for a specific point source to a specific receiving water for a given pollutant. As part of their water quality standards regulations, states and authorized tribes adopt ambient water quality criteria with sufficient coverage of parameters, such as lead, and of adequate stringency to protect the designated uses of their surface waters. In adopting criteria, states and tribes may:
- Adopt the criteria that EPA publishes under Section 304(a) of the Clean Water Act;
- Modify the Section 304(a) criteria to reflect site-specific conditions; or
- Adopt criteria based on other scientifically-defensible methods.
States and tribes typically adopt both numeric and narrative criteria.
Pretreatment Standards and Limits
In addition to direct discharges, wastewaters may be indirectly discharged into waters of the U.S.
- Through sewer systems connected to publicly owned treatment works (POTW) that discharge directly to waters of the U.S. or
- By being introduced by truck or rail into a POTW that discharges directly.
Typically pretreatment standards are applied to industrial users by the POTW under pretreatment permits.
- Prohibited Discharge Standards: The CWA requires EPA to promulgate federal standards for the pretreatment of wastewater introduced to a POTW that interferes with, passes through, or is otherwise incompatible with POTW operations. Section 307(d) of the CWA then prohibits discharge in violation of any pretreatment standard. EPA has promulgated regulations that establish national pretreatment standards that include general and specific prohibitions on the introduction of certain pollutants into POTWs.
- Categorical Pretreatment Standards: Categorical Pretreatment Standards limit the pollutant discharges to POTWs from specific process wastewaters of particular industrial categories. Categorical Pretreatment Standards are technology-based regulations to control industrial wastewater discharges, which apply regardless of whether or not the POTW has an approved pretreatment program or the industrial user has been issued a control mechanism or permit. Currently, EPA has issued 15 categorical pretreatment standards that contain a limit for lead discharges.
- Local Limits: In addition to EPA's national pretreatment standards, POTW pretreatment programs must develop local limits or demonstrate that they are unnecessary. EPA has identified lead as one of 15 pollutants often found in POTW sludge and effluent that it considers a potential pollutant of concern. EPA recommends that each POTW, at a minimum, screen for the presence of these pollutants. For additional information, please see Chapter 3 of EPA's Local Limits Development Guidance, July 2004 (EPA-833-R-04-002A) (PDF) (134 pp, 2.3MB ).
In addition to being discharged through sewer systems connected to POTWs, wastewater may also be disposed of at centralized waste treatment facilities. Technology-based standards for centralized waste treatment facilities can be found at 40 CFR Part 437.
Safe Drinking Water Act
Lead in drinking water is regulated under the Lead and Copper Rule.
See also:
- Additional rules: Lead in water
- Enforcement information: Lead in water
- Compliance information: Lead in water
- Policies and guidance: Lead in water
Lead in Air
Lead in the air is regulated two ways under the Clean Air Act:
- As one of six common pollutants for which EPA has issued national ambient air quality standards (NAAQS), and
- As a toxic air pollutant (also called a hazardous air pollutant) for which industrial facility emissions are regulated.
Under the lead NAAQS, EPA limits how much lead there can be in the ambient (outdoor) air. EPA specifies requirements for the siting of monitoring stations to ensure compliance with the NAAQS. EPA also publishes guidelines for state, local and tribal permitting authorities to guide development of NAAQS state implementation plans (SIPs). In addition, EPA’s New Source Review permitting programs require any large new or modified stationary source to get a permit before it begins construction.
EPA also regulates lead as a toxic air pollutant by limiting the emissions that come from some industrial sources. The regulations that limit toxic air pollutant emissions are called National Emission Standards for Hazardous Air Pollutants, or NESHAPs. Two regulations that focus on limiting lead emissions are the NESHAPs for Primary Lead Smelting and Secondary Lead Smelting. Other NESHAPs control lead that is emitted along with other toxic air pollutants.
See also:
- Additional rules: Lead in air
- Enforcing lead laws and regulations: Lead in air
- Complying with lead laws and regulations: Lead in air
- Lead policy and guidance: Lead in air
Lead Waste and Cleanup
Several EPA programs address the disposal and cleanup of lead waste.
- Residential lead-based paint - In order to reduce lead poisoning and promote efforts to reduce lead in and around homes, EPA has determined that contractors can manage residential lead-based paint as a household waste.
- Disposing of lead-contaminated toys and other items
- National Lead Free Wheel Weight Initiative
- Lead-acid (automobile) battery recycling
In addition, EPA's waste disposal and cleanup programs often involve sites contaminated with lead.
See also:
- Enforcement information: Lead waste disposal
- Compliance information: Lead waste disposal
- Policies and guidance: Lead waste disposal
Lead Wheel Weights
Lead in lead wheel weights is regulated under the Toxic Substances Control Act (TSCA).
In March 2024, EPA released an advance notice of proposed rulemaking (ANPRM) asking the public for information on the potential ways in which people might be exposed to lead through the use of wheel weights. EPA is asking interested parties to submit scientific studies about how lead wheel weights are used, the possible ways in which people could be exposed to lead, and information about alternatives to lead wheel weights, among other topics. This information will help EPA determine if the use of lead wheel weights poses unreasonable risk to human health and the environment. If unreasonable risk is found, EPA will initiate a proposed rulemaking under TSCA to address the unreasonable risk.
In May 2009, the Ecology Center, Sierra Club and others raised concerns about lead exposure to children from lead wheel weights in a TSCA section 21 petition, which EPA granted, requesting that EPA “establish regulations prohibiting the manufacture, processing, and distribution in commerce” of lead wheel weights. In August 2023, these petitioners sought a writ of mandamus in the United States Court of Appeals for the Ninth Circuit to direct EPA to conclude a rulemaking regulating lead wheel weights. The Agency developed this ANPRM in response to concerns raised by the petitioners.