The objectives of this investigation are to evaluate the effect of the viscosity of polymer solut... more The objectives of this investigation are to evaluate the effect of the viscosity of polymer solution phase on microsphere properties, especially the drug release characteristics since no studies on this formulation variable have been reported. Also, since it is known that polymer molecular weight affects both the viscosity of the polymer solution and the release properties of microspheres, the interaction of these factors was studied. Microspheres with 33% theoretical drug loading of anhydrous theophylline core material were prepared by the emulsion solvent evaporation method. Two cellulose acetate butyrate polymers, (CAB381-2, CAB381-20), chemically similar but having different molecular weights, were used to prepare different polymer solutions having different apparent viscosities in acetone. A Brookfield viscometer was used to evaluate the viscosities of polymer solutions. Dissolution rates of microspheres prepared from the polymer solutions were inversely related to the initial polymer solution viscosities for both CAB381-2 and CAB381-20. The times for the release of 30 and 50% of the drug from the microspheres have a linear relationship with initial polymer solution viscosity. Initial release was significantly decreased with increasing polymer solution viscosity. Unlike CAB381-2 microspheres which follow Higuchi spherical matrix release kinetics, microspheres prepared from the higher molecular weight polymer (CAB381-20) showed extended release dissolution profiles with near zero order kinetics. It is evident that both the polymer solution viscosity and the molecular weight have an effect on the drug release from microspheres. These results suggest that release rates of matrix microspheres could be predictably optimized by adjusting the viscosity of polymer solutions.
European Journal of Pharmaceutics and Biopharmaceutics, Sep 1, 2010
Due to their positive features (e.g., increased penetration of actives, re-enforcement of the lip... more Due to their positive features (e.g., increased penetration of actives, re-enforcement of the lipid barrier and increase in skin hydration), nanostructured lipid carriers (NLC) are used in many dermal formulations. These formulations require preservation, and preservatives can impair the physical stability of disperse systems. Therefore, in this study, the influence of preservatives on the physical stability of Q10-loaded NLC was investigated using 11 different preservative mixtures. Whereas for nanosuspensions, only a limited number of preservatives are known from the literature not affecting their physical stability, a surprisingly high number of seven preservatives could be identified to be suitable for the preservation of NLC dispersions. For Q10-loaded NLC, Hydrolite 5 proved to be the best preservative, as it was found surprisingly to stabilize the NLC dispersion. Based on the data, a preservative classification system is suggested and a mechanistic model describing six key parameters affecting the physical stability of NLC could be developed. As most suitable characterization method to screen for suitable preservatives, light microscopy was identified. By being a simple, fast and cost efficient method, even extensive preservative screening studies can be performed very efficiently.
The goal of the work described in this publication was to evaluate a new, small, material-sparing... more The goal of the work described in this publication was to evaluate a new, small, material-sparing freeze dryer, denoted as the Bmini-freeze dryer or mini-FD^, capable of reproducing the product temperature history of larger freeze dryers, thereby facilitating scale-up. The mini-FD wall temperatures can be controlled to mimic loading procedures and dryer process characteristics of larger dryers. The mini-FD is equipped with a tunable diode laser absorption spectroscopy (TDLAS) water vapor mass flow monitor and with other advanced process analytical technology (PAT) sensors. Drying experiments were performed to demonstrate scalability to larger freeze dryers, including the determination of vial heat transfer coefficients, K v . Product temperature histories during K v runs were evaluated and compared with those obtained with a commercial laboratory-scale freeze dryer (LyoStar II) for sucrose and mannitol product formulations. When the mini-FD wall temperature was set at the LyoStar II band temperature (-20°C) to mimic lab dryer edge vials, edge vial drying in the mini-FD possessed an average K v within 5% of those obtained during drying in the LyoStar II. When the wall temperature of the mini-FD was set equal to the central vial product temperature, edge vials behaved as center vials, possessing a K v value within 5% of those measured in the LyoStar II. During both K v runs and complete product freeze drying runs, the temperature-time profiles for the average edge vials and central vial in the mini-FD agreed well with the average edge and average central vials of the LyoStar II.
The objectives of this investigation are to evaluate the effect of the viscosity of polymer solut... more The objectives of this investigation are to evaluate the effect of the viscosity of polymer solution phase on microsphere properties, especially the drug release characteristics since no studies on this formulation variable have been reported. Also, since it is known that polymer molecular weight affects both the viscosity of the polymer solution and the release properties of microspheres, the interaction of these factors was studied. Microspheres with 33% theoretical drug loading of anhydrous theophylline core material were prepared by the emulsion solvent evaporation method. Two cellulose acetate butyrate polymers, (CAB381-2, CAB381-20), chemically similar but having different molecular weights, were used to prepare different polymer solutions having different apparent viscosities in acetone. A Brookfield viscometer was used to evaluate the viscosities of polymer solutions. Dissolution rates of microspheres prepared from the polymer solutions were inversely related to the initial polymer solution viscosities for both CAB381-2 and CAB381-20. The times for the release of 30 and 50% of the drug from the microspheres have a linear relationship with initial polymer solution viscosity. Initial release was significantly decreased with increasing polymer solution viscosity. Unlike CAB381-2 microspheres which follow Higuchi spherical matrix release kinetics, microspheres prepared from the higher molecular weight polymer (CAB381-20) showed extended release dissolution profiles with near zero order kinetics. It is evident that both the polymer solution viscosity and the molecular weight have an effect on the drug release from microspheres. These results suggest that release rates of matrix microspheres could be predictably optimized by adjusting the viscosity of polymer solutions.
Theophylline microspheres were prepared by the emulsion-solvent evaporation method using cellulos... more Theophylline microspheres were prepared by the emulsion-solvent evaporation method using cellulose acetate butyrate (CAB381-20) and mixtures of CAB381-20(R) and cellulose acetate phthalate. The physical state of the drug, polymers and microspheres surfaces were determined using scanning electron microscopy. For those microspheres prepared using mixtures of CAB381-20 and cellulose acetate phthalate, scanning electron micrographs were taken before dissolution and also at different stages of dissolution (in SGF, pH 1.2 and in simulated intestinal fluid, pH 7.5). Micrographs were taken of the outside surfaces of the microspheres and of the cleaved microspheres showing their interiors (core). Drug crystals were observed on or near the surface of microspheres prepared from the polymer mixtures, while no drug particles or crystals were seen on the surfaces of microspheres prepared solely from CAB381-20. An acid wash for less than 2 min was capable of extracting all drug on the surface of the microspheres prepared from a mixture of CAB381-20 and cellulose acetate phthalate. The absence of drug crystals on the surface of CAB381-20 microspheres is believed to prevent initial drug release and create a lag time in release profiles. Results suggest that in both microsphere formulations, a layer of drug-free polymer is formed outside the core matrix and is believed to be responsible for the near zero-order release profiles.
European Journal of Pharmaceutics and Biopharmaceutics, 2010
Due to their positive features (e.g., increased penetration of actives, re-enforcement of the lip... more Due to their positive features (e.g., increased penetration of actives, re-enforcement of the lipid barrier and increase in skin hydration), nanostructured lipid carriers (NLC) are used in many dermal formulations. These formulations require preservation, and preservatives can impair the physical stability of disperse systems. Therefore, in this study, the influence of preservatives on the physical stability of Q10-loaded NLC was investigated using 11 different preservative mixtures. Whereas for nanosuspensions, only a limited number of preservatives are known from the literature not affecting their physical stability, a surprisingly high number of seven preservatives could be identified to be suitable for the preservation of NLC dispersions. For Q10-loaded NLC, Hydrolite 5 proved to be the best preservative, as it was found surprisingly to stabilize the NLC dispersion. Based on the data, a preservative classification system is suggested and a mechanistic model describing six key parameters affecting the physical stability of NLC could be developed. As most suitable characterization method to screen for suitable preservatives, light microscopy was identified. By being a simple, fast and cost efficient method, even extensive preservative screening studies can be performed very efficiently.
... fluctuation in drug blood levels. Non-therapeutic Objectives - These include taste masking,od... more ... fluctuation in drug blood levels. Non-therapeutic Objectives - These include taste masking,odor masking, separation of incompatibilities. ... RELEASE MEDICATION a) Oral and gastrointestinal route - The development of extended release dosage ...
We investigated the compatibility of host plant resistance to the black bean aphid in the faba be... more We investigated the compatibility of host plant resistance to the black bean aphid in the faba bean crop with the use of the predatory ladybird beetle for biological control under laboratory and greenhouse conditions. Greenhouse experiments indicated that apteriform Aphis fabae reproduced on Vicia faba major (susceptible) and on 79S4 (partially resistant) cultivars at different rates. During the entire experimental period, aphids built up higher populations on V. faba major than on 79S4 cultivar. Aphid numbers on 79S4 were about 37% of those on V. faba major after 14 days. Release of a newly hatched Coccinella septempunctata larva onto each plant significantly reduced aphid density to 32.8% and 57.2% on V. faba major and 79S4 on day 14, respectively. Partial resistance combined with predation was more effective in lessening aphid numbers on faba bean than either the predator or the plant resistance alone. Laboratory tests showed that prey, A. fabae, raised on susceptible cultivar was more suitable for the predator as food source, enhancing the development rate and fecundity than aphids fed on the partially resistant cultivar. Consumption of aphids reared on susceptible cultivar significantly increased the female fecundity and fertility of C. septempunctata by 37.7% and 33.2%, respectively, more than those fed with aphids from partially resistant cultivar. Pre-oviposition time was shortened by 4.5 days, and oviposition period was extended by 11.4 days. Feeding the predator on aphids from the partially resistant cultivar prolonged the embryonic larval developmental time and the time required from egg laying to adult emergence by 19.8, 10.1 and 32.5 h, respectively. Adult longevity was not influenced by the aphid source. The results are discussed in relation to the compatible utilisation of host plant resistance and biological control in the integrated management of aphids.
Objective: The objective of this study was to evaluate the suitability of a ternary mixture of sm... more Objective: The objective of this study was to evaluate the suitability of a ternary mixture of smart polymers comprised of Eudragit®E100, Eudragit®L100, and sodium alginate to serve as a carrier for sustained drug release for weakly basic drugs. The model drug chosen in this part of the study is Metronidazole. Methods: Matrix tablet formulations were prepared by either direct compression or by wet granulation. Dissolution studies were conducted using USP XXΠ rotating paddle apparatus in three different consecutive stages (pH 1.2, 4.8, and 6.8). Tablets made of low to intermediate proportions of sodium alginate and approximately equal proportions of Eudragit®E100 and Eudragit®L100 were found to have a significant modification of drug release rates. Results: Thus, indicating a potential for controlling the drug release for 12 hours depending on polymers ratios in the formulation. The ratio of sodium alginate to total Eudragit® polymers and the ratio of Eudragit®E100 to Eudragit®L100 w...
Hydrogen/deuterium (H/D) exchange over a range of temperatures suggests a protein structural/mobi... more Hydrogen/deuterium (H/D) exchange over a range of temperatures suggests a protein structural/mobility transition in the solid state below the system glass transition temperature (Tg). The purpose of this study was to determine whether solid-state protein stability correlates with the difference between storage temperature and apparent Td where an abrupt change in mobility occurs, or alternatively, the extent of H/D exchange at a single temperature correlates directly to protein stability in lyophilized solids. Solid-state H/D exchange was monitored by FTIR spectroscopy to study the extent of exchange and the apparent transition temperature in both pure recombinant human serum albumin (rHSA) and rHSA formulated with sucrose or trehalose. H/D exchange of freeze-dried formulations at 11% RH and temperatures from 30 to 80°C was monitored. Protein stability against aggregation at 40°C/11% RH for 6 months was assessed by size exclusion chromatography (SEC). Both sucrose and trehalose showed equivalent protection of protein secondary structure by FTIR. The rHSA:sucrose formulation showed superior long-term stability at 40°C by SEC over the trehalose formulation, but the apparent Td determined from H/D exchange was much higher in the trehalose formulation. Instead, the extent of H/D exchange (X∞) was lower in the sucrose formulation at the temperature of the stability studies (40°C) than found for the trehalose formulation, which was consistent with better stability in the sucrose formulation. While apparent Td did not correlate with protein stability for rHSA, the extent of H/D exchange, X∞, did.
Abstract. The objective of this study was to compare a novel sustained release tablet formulation... more Abstract. The objective of this study was to compare a novel sustained release tablet formulation that has the potential to be used for drugs of different physicochemical properties using a binary mixture of polymethacrylate polymers in their salt forms with the polymethacrylate interpolyelectrolyte complex (IPEC) tablets in terms of drug release and compactness. Also, we aimed to compare this formulation with an IPEC tablet in terms of drug release. Tablets prepared using Eudragit E-Citrate and Eudragit L-Sodium were more convenient, easier to prepare, and showed better sustained release and compactness characteristics compared to IPEC tablets of similar concentrations and preparation methods. KEY WORDS: Eudragit E-100; Eudragit L-100; FTIR; IPEC; pH profile; sustained release.
Introduction: Hydrophilic polymers that swell or dissolve in aqueous media can have the potential... more Introduction: Hydrophilic polymers that swell or dissolve in aqueous media can have the potential to prepare controlled/sustained dosage forms for weakly acidic and poorly soluble drugs. Objective: The main objective of this study is to utilize Eudragit®E100 (EE) and Carbopol®971P NF (Cp) polymers and their salt forms for the preparation of a once-daily controlled-release matrix tablet for model drug, Ibuprofen (IB). Methods: Combinations of the polymers in their base forms (EE)/(Cp) or in their salt forms (EEHCl/ CpNa) were compressed with (IB) into single layer matrix tablets, or otherwise into bilayer tablets. Dissolution profiles were constructed using three different consecutive stages (pH 1.2, 4.8 and 6.8). Result: It was found that the incorporation of (EEHCl) modified the release rates of (IB) from (Cp) based matrix tablets. However, a major enhancement of (IB) release rates occurred when the polymers were combined in their salt forms in a 1:1 ratio by weight. In addition, a...
The objectives of this investigation are to evaluate the effect of the viscosity of polymer solut... more The objectives of this investigation are to evaluate the effect of the viscosity of polymer solution phase on microsphere properties, especially the drug release characteristics since no studies on this formulation variable have been reported. Also, since it is known that polymer molecular weight affects both the viscosity of the polymer solution and the release properties of microspheres, the interaction of these factors was studied. Microspheres with 33% theoretical drug loading of anhydrous theophylline core material were prepared by the emulsion solvent evaporation method. Two cellulose acetate butyrate polymers, (CAB381-2, CAB381-20), chemically similar but having different molecular weights, were used to prepare different polymer solutions having different apparent viscosities in acetone. A Brookfield viscometer was used to evaluate the viscosities of polymer solutions. Dissolution rates of microspheres prepared from the polymer solutions were inversely related to the initial polymer solution viscosities for both CAB381-2 and CAB381-20. The times for the release of 30 and 50% of the drug from the microspheres have a linear relationship with initial polymer solution viscosity. Initial release was significantly decreased with increasing polymer solution viscosity. Unlike CAB381-2 microspheres which follow Higuchi spherical matrix release kinetics, microspheres prepared from the higher molecular weight polymer (CAB381-20) showed extended release dissolution profiles with near zero order kinetics. It is evident that both the polymer solution viscosity and the molecular weight have an effect on the drug release from microspheres. These results suggest that release rates of matrix microspheres could be predictably optimized by adjusting the viscosity of polymer solutions.
European Journal of Pharmaceutics and Biopharmaceutics, Sep 1, 2010
Due to their positive features (e.g., increased penetration of actives, re-enforcement of the lip... more Due to their positive features (e.g., increased penetration of actives, re-enforcement of the lipid barrier and increase in skin hydration), nanostructured lipid carriers (NLC) are used in many dermal formulations. These formulations require preservation, and preservatives can impair the physical stability of disperse systems. Therefore, in this study, the influence of preservatives on the physical stability of Q10-loaded NLC was investigated using 11 different preservative mixtures. Whereas for nanosuspensions, only a limited number of preservatives are known from the literature not affecting their physical stability, a surprisingly high number of seven preservatives could be identified to be suitable for the preservation of NLC dispersions. For Q10-loaded NLC, Hydrolite 5 proved to be the best preservative, as it was found surprisingly to stabilize the NLC dispersion. Based on the data, a preservative classification system is suggested and a mechanistic model describing six key parameters affecting the physical stability of NLC could be developed. As most suitable characterization method to screen for suitable preservatives, light microscopy was identified. By being a simple, fast and cost efficient method, even extensive preservative screening studies can be performed very efficiently.
The goal of the work described in this publication was to evaluate a new, small, material-sparing... more The goal of the work described in this publication was to evaluate a new, small, material-sparing freeze dryer, denoted as the Bmini-freeze dryer or mini-FD^, capable of reproducing the product temperature history of larger freeze dryers, thereby facilitating scale-up. The mini-FD wall temperatures can be controlled to mimic loading procedures and dryer process characteristics of larger dryers. The mini-FD is equipped with a tunable diode laser absorption spectroscopy (TDLAS) water vapor mass flow monitor and with other advanced process analytical technology (PAT) sensors. Drying experiments were performed to demonstrate scalability to larger freeze dryers, including the determination of vial heat transfer coefficients, K v . Product temperature histories during K v runs were evaluated and compared with those obtained with a commercial laboratory-scale freeze dryer (LyoStar II) for sucrose and mannitol product formulations. When the mini-FD wall temperature was set at the LyoStar II band temperature (-20°C) to mimic lab dryer edge vials, edge vial drying in the mini-FD possessed an average K v within 5% of those obtained during drying in the LyoStar II. When the wall temperature of the mini-FD was set equal to the central vial product temperature, edge vials behaved as center vials, possessing a K v value within 5% of those measured in the LyoStar II. During both K v runs and complete product freeze drying runs, the temperature-time profiles for the average edge vials and central vial in the mini-FD agreed well with the average edge and average central vials of the LyoStar II.
The objectives of this investigation are to evaluate the effect of the viscosity of polymer solut... more The objectives of this investigation are to evaluate the effect of the viscosity of polymer solution phase on microsphere properties, especially the drug release characteristics since no studies on this formulation variable have been reported. Also, since it is known that polymer molecular weight affects both the viscosity of the polymer solution and the release properties of microspheres, the interaction of these factors was studied. Microspheres with 33% theoretical drug loading of anhydrous theophylline core material were prepared by the emulsion solvent evaporation method. Two cellulose acetate butyrate polymers, (CAB381-2, CAB381-20), chemically similar but having different molecular weights, were used to prepare different polymer solutions having different apparent viscosities in acetone. A Brookfield viscometer was used to evaluate the viscosities of polymer solutions. Dissolution rates of microspheres prepared from the polymer solutions were inversely related to the initial polymer solution viscosities for both CAB381-2 and CAB381-20. The times for the release of 30 and 50% of the drug from the microspheres have a linear relationship with initial polymer solution viscosity. Initial release was significantly decreased with increasing polymer solution viscosity. Unlike CAB381-2 microspheres which follow Higuchi spherical matrix release kinetics, microspheres prepared from the higher molecular weight polymer (CAB381-20) showed extended release dissolution profiles with near zero order kinetics. It is evident that both the polymer solution viscosity and the molecular weight have an effect on the drug release from microspheres. These results suggest that release rates of matrix microspheres could be predictably optimized by adjusting the viscosity of polymer solutions.
Theophylline microspheres were prepared by the emulsion-solvent evaporation method using cellulos... more Theophylline microspheres were prepared by the emulsion-solvent evaporation method using cellulose acetate butyrate (CAB381-20) and mixtures of CAB381-20(R) and cellulose acetate phthalate. The physical state of the drug, polymers and microspheres surfaces were determined using scanning electron microscopy. For those microspheres prepared using mixtures of CAB381-20 and cellulose acetate phthalate, scanning electron micrographs were taken before dissolution and also at different stages of dissolution (in SGF, pH 1.2 and in simulated intestinal fluid, pH 7.5). Micrographs were taken of the outside surfaces of the microspheres and of the cleaved microspheres showing their interiors (core). Drug crystals were observed on or near the surface of microspheres prepared from the polymer mixtures, while no drug particles or crystals were seen on the surfaces of microspheres prepared solely from CAB381-20. An acid wash for less than 2 min was capable of extracting all drug on the surface of the microspheres prepared from a mixture of CAB381-20 and cellulose acetate phthalate. The absence of drug crystals on the surface of CAB381-20 microspheres is believed to prevent initial drug release and create a lag time in release profiles. Results suggest that in both microsphere formulations, a layer of drug-free polymer is formed outside the core matrix and is believed to be responsible for the near zero-order release profiles.
European Journal of Pharmaceutics and Biopharmaceutics, 2010
Due to their positive features (e.g., increased penetration of actives, re-enforcement of the lip... more Due to their positive features (e.g., increased penetration of actives, re-enforcement of the lipid barrier and increase in skin hydration), nanostructured lipid carriers (NLC) are used in many dermal formulations. These formulations require preservation, and preservatives can impair the physical stability of disperse systems. Therefore, in this study, the influence of preservatives on the physical stability of Q10-loaded NLC was investigated using 11 different preservative mixtures. Whereas for nanosuspensions, only a limited number of preservatives are known from the literature not affecting their physical stability, a surprisingly high number of seven preservatives could be identified to be suitable for the preservation of NLC dispersions. For Q10-loaded NLC, Hydrolite 5 proved to be the best preservative, as it was found surprisingly to stabilize the NLC dispersion. Based on the data, a preservative classification system is suggested and a mechanistic model describing six key parameters affecting the physical stability of NLC could be developed. As most suitable characterization method to screen for suitable preservatives, light microscopy was identified. By being a simple, fast and cost efficient method, even extensive preservative screening studies can be performed very efficiently.
... fluctuation in drug blood levels. Non-therapeutic Objectives - These include taste masking,od... more ... fluctuation in drug blood levels. Non-therapeutic Objectives - These include taste masking,odor masking, separation of incompatibilities. ... RELEASE MEDICATION a) Oral and gastrointestinal route - The development of extended release dosage ...
We investigated the compatibility of host plant resistance to the black bean aphid in the faba be... more We investigated the compatibility of host plant resistance to the black bean aphid in the faba bean crop with the use of the predatory ladybird beetle for biological control under laboratory and greenhouse conditions. Greenhouse experiments indicated that apteriform Aphis fabae reproduced on Vicia faba major (susceptible) and on 79S4 (partially resistant) cultivars at different rates. During the entire experimental period, aphids built up higher populations on V. faba major than on 79S4 cultivar. Aphid numbers on 79S4 were about 37% of those on V. faba major after 14 days. Release of a newly hatched Coccinella septempunctata larva onto each plant significantly reduced aphid density to 32.8% and 57.2% on V. faba major and 79S4 on day 14, respectively. Partial resistance combined with predation was more effective in lessening aphid numbers on faba bean than either the predator or the plant resistance alone. Laboratory tests showed that prey, A. fabae, raised on susceptible cultivar was more suitable for the predator as food source, enhancing the development rate and fecundity than aphids fed on the partially resistant cultivar. Consumption of aphids reared on susceptible cultivar significantly increased the female fecundity and fertility of C. septempunctata by 37.7% and 33.2%, respectively, more than those fed with aphids from partially resistant cultivar. Pre-oviposition time was shortened by 4.5 days, and oviposition period was extended by 11.4 days. Feeding the predator on aphids from the partially resistant cultivar prolonged the embryonic larval developmental time and the time required from egg laying to adult emergence by 19.8, 10.1 and 32.5 h, respectively. Adult longevity was not influenced by the aphid source. The results are discussed in relation to the compatible utilisation of host plant resistance and biological control in the integrated management of aphids.
Objective: The objective of this study was to evaluate the suitability of a ternary mixture of sm... more Objective: The objective of this study was to evaluate the suitability of a ternary mixture of smart polymers comprised of Eudragit®E100, Eudragit®L100, and sodium alginate to serve as a carrier for sustained drug release for weakly basic drugs. The model drug chosen in this part of the study is Metronidazole. Methods: Matrix tablet formulations were prepared by either direct compression or by wet granulation. Dissolution studies were conducted using USP XXΠ rotating paddle apparatus in three different consecutive stages (pH 1.2, 4.8, and 6.8). Tablets made of low to intermediate proportions of sodium alginate and approximately equal proportions of Eudragit®E100 and Eudragit®L100 were found to have a significant modification of drug release rates. Results: Thus, indicating a potential for controlling the drug release for 12 hours depending on polymers ratios in the formulation. The ratio of sodium alginate to total Eudragit® polymers and the ratio of Eudragit®E100 to Eudragit®L100 w...
Hydrogen/deuterium (H/D) exchange over a range of temperatures suggests a protein structural/mobi... more Hydrogen/deuterium (H/D) exchange over a range of temperatures suggests a protein structural/mobility transition in the solid state below the system glass transition temperature (Tg). The purpose of this study was to determine whether solid-state protein stability correlates with the difference between storage temperature and apparent Td where an abrupt change in mobility occurs, or alternatively, the extent of H/D exchange at a single temperature correlates directly to protein stability in lyophilized solids. Solid-state H/D exchange was monitored by FTIR spectroscopy to study the extent of exchange and the apparent transition temperature in both pure recombinant human serum albumin (rHSA) and rHSA formulated with sucrose or trehalose. H/D exchange of freeze-dried formulations at 11% RH and temperatures from 30 to 80°C was monitored. Protein stability against aggregation at 40°C/11% RH for 6 months was assessed by size exclusion chromatography (SEC). Both sucrose and trehalose showed equivalent protection of protein secondary structure by FTIR. The rHSA:sucrose formulation showed superior long-term stability at 40°C by SEC over the trehalose formulation, but the apparent Td determined from H/D exchange was much higher in the trehalose formulation. Instead, the extent of H/D exchange (X∞) was lower in the sucrose formulation at the temperature of the stability studies (40°C) than found for the trehalose formulation, which was consistent with better stability in the sucrose formulation. While apparent Td did not correlate with protein stability for rHSA, the extent of H/D exchange, X∞, did.
Abstract. The objective of this study was to compare a novel sustained release tablet formulation... more Abstract. The objective of this study was to compare a novel sustained release tablet formulation that has the potential to be used for drugs of different physicochemical properties using a binary mixture of polymethacrylate polymers in their salt forms with the polymethacrylate interpolyelectrolyte complex (IPEC) tablets in terms of drug release and compactness. Also, we aimed to compare this formulation with an IPEC tablet in terms of drug release. Tablets prepared using Eudragit E-Citrate and Eudragit L-Sodium were more convenient, easier to prepare, and showed better sustained release and compactness characteristics compared to IPEC tablets of similar concentrations and preparation methods. KEY WORDS: Eudragit E-100; Eudragit L-100; FTIR; IPEC; pH profile; sustained release.
Introduction: Hydrophilic polymers that swell or dissolve in aqueous media can have the potential... more Introduction: Hydrophilic polymers that swell or dissolve in aqueous media can have the potential to prepare controlled/sustained dosage forms for weakly acidic and poorly soluble drugs. Objective: The main objective of this study is to utilize Eudragit®E100 (EE) and Carbopol®971P NF (Cp) polymers and their salt forms for the preparation of a once-daily controlled-release matrix tablet for model drug, Ibuprofen (IB). Methods: Combinations of the polymers in their base forms (EE)/(Cp) or in their salt forms (EEHCl/ CpNa) were compressed with (IB) into single layer matrix tablets, or otherwise into bilayer tablets. Dissolution profiles were constructed using three different consecutive stages (pH 1.2, 4.8 and 6.8). Result: It was found that the incorporation of (EEHCl) modified the release rates of (IB) from (Cp) based matrix tablets. However, a major enhancement of (IB) release rates occurred when the polymers were combined in their salt forms in a 1:1 ratio by weight. In addition, a...
Uploads
Papers by Wasfy Obeidat