sqlite/main.mk at master · sqlite/sqlite

2527 lines (2223 loc) · 81.3 KB
#!/do/not/make
# ^^^^ help out editors which guess this file's type.
###############################################################################
# This is the main makefile for sqlite. It expects to be included from
# a higher-level makefile which configures any dynamic state needed by
# this one (as documented below).
# Maintenance reminders:
#  - This file must remain devoid of GNU Make-isms.  i.e. it must be
#  POSIX Make compatible. "bmake" (BSD make) is available on most
#  Linux systems, so compatibility is relatively easy to test.  As a
#  harmless exception, this file sometimes uses $(MAKEFILE_LIST) as a
#  dependency. That var, in GNU Make, holds a list of all of the
#  makefiles currently loaded.
# The variables listed below must be defined before this script is
# invoked. This file will use defaults, very possibly invalid, for any
# which are not defined.
########################################################################
# The top-level directory of the source tree.  For canonical builds
# this is the directory that contains this "Makefile.in" and the
# "auto.def" script. For out-of-tree builds, this will differ from
TOP ?= $(PWD)
# $(PACKAGE_VERSION) =
# The MAJOR.MINOR.PATCH version number of this build.
PACKAGE_VERSION ?=
# $(B.cc) =
# C Compiler and options for use in building executables that will run
# on the platform that is doing the build.
B.cc ?= $(CC)
# $(T.cc) =
# C Compiler and options for use in building executables that will run
# on the target platform.  This is usually the same as B.cc, unless you
# are cross-compiling. Note that it should only contain flags which
# are used by _all_ build targets.  Flags needed only by specific
# targets are defined elsewhere and applied on a per-target basis.
T.cc ?= $(B.cc)
# Tool used to build a static library from object files, without its
# arguments. $(AR.flags) are its flags for creating a lib.
AR       ?= ar
AR.flags ?= cr
# $(B.exe) =
# File extension for executables on the build platform:. .exe for
# Windows and empty everywhere else.
# $(B.dll) and $(B.lib) =
# The DLL resp. static library counterparts of $(B.exe).
B.dll ?= .so
B.lib ?= .a
# $(T.exe) =
# File extension for executables on the target platform: .exe for
# Windows and empty everywhere else.
T.exe ?= $(B.exe)
# $(T.dll) and $(T.lib) =
# The DLL resp. static library counterparts of $(T.exe).
T.dll ?= $(B.dll)
T.lib ?= $(B.lib)
# HAVE_TCL = 1 to enable full tcl support, else 0.
HAVE_TCL ?= 0
# $(TCLSH_CMD) =
# The canonical tclsh.
TCLSH_CMD ?= tclsh
# JimTCL is part of the autosetup suite and is suitable for all
# current in-tree code-generation TCL jobs, but it requires that we
# build it with non-default flags. The canonical build tree will, if
# no system-level tclsh is found, also have a ./jimsh0 binary. That
# one is a bare-bones build for the configure process, whereas we need
# to build it with another option enabled for use with the various
# code generators.
# JIMSH requires a leading path component, even if it's ./, so that it
# can be used as a shell command.
# On Windows platforms, if -DHAVE_REALPATH does not work then try
# -DHAVE__FULLPATH (note the double-underscore).
CFLAGS.jimsh ?= -DHAVE_REALPATH
JIMSH ?= ./jimsh$(T.exe)
# $(B.tclsh) =
# The TCL interpreter for in-tree code generation. May be either the
# in-tree JimTCL ($(JIMSH)) or the canonical TCL ($(TCLSH_CMD)). If
# it's JimTCL, it must be compiled with -DHAVE_REALPATH (Unix) or
# -DHAVE__FULLPATH (Windows) so that the Tcl function [file normalize]
# can work.
B.tclsh ?= $(JIMSH)
# Autotools-conventional vars which are (in this tree) used only by
# package installation rules and for generating sqlite3.pc (pkg-config
# data file).
# The following ${XYZdir} vars are provided for the sake of clients
# who expect to be able to override these using autotools-conventional
# dir name vars.
prefix      ?= /usr/local
datadir     ?= $(prefix)/share
mandir      ?= $(datadir)/man
includedir  ?= $(prefix)/include
exec_prefix ?= $(prefix)
bindir      ?= $(exec_prefix)/bin
libdir      ?= $(exec_prefix)/lib
# This makefile does not use any of:
# sbindir        ?= $(exec_prefix)/sbin
# sysconfdir     ?= /etc
# sharedstatedir ?= $(prefix)/com
# localstatedir  ?= /var
# runstatedir    ?= /run
# infodir        ?= $(datadir)/info
# libexecdir     ?= $(exec_prefix)/libexec
### end of autotools-compatible install dir vars
# $(LDFLAGS.{feature}) and $(CFLAGS.{feature}) =
# Linker resp. C/CPP flags required by a specific feature, e.g.
# $(LDFLAGS.pthread) or $(CFLAGS.readline).
# Rather that stuffing all CFLAGS and LDFLAGS into a single set, we
# break them down on a per-feature basis and expect the build targets
# to use the one(s) it needs.
LDFLAGS.zlib ?= -lz
LDFLAGS.math ?= -lm
LDFLAGS.rpath ?= -Wl,-rpath -Wl,$(prefix)/lib
LDFLAGS.pthread ?= -lpthread
LDFLAGS.dlopen ?= -ldl
LDFLAGS.shlib ?= -shared
LDFLAGS.rt ?= # nanosleep on some platforms
LDFLAGS.icu ?= # -licui18n -licuuc -licudata
CFLAGS.icu ?=
LDFLAGS.libsqlite3.soname ?= # see https://sqlite.org/src/forumpost/5a3b44f510df8ded
LDFLAGS.libsqlite3.os-specific ?= # see https://sqlite.org/forum/forumpost/9dfd5b8fd525a5d7
# libreadline (or a workalike):
# To activate readline in the shell: SHELL_OPT = -DHAVE_READLINE=1
LDFLAGS.readline ?= -lreadline # these vary across platforms
CFLAGS.readline ?= -I$(prefix)/include
# ^^^ When using linenoise instead of readline, do something like:
# SHELL_OPT += -DHAVE_LINENOISE=1
# CFLAGS.readline = -I$(HOME)/linenoise $(HOME)/linenoise/linenoise.c
# LDFLAGS.readline = # empty
# $(INSTALL) =
# Tool for installing files and directories. It must be compatible
# with conventional Unix /usr/bin/install. Note that libtool's
# install-sh is _not_ compatible with this because it _moves_ targets
# during installation, which may break the build of targets which are
# built after others are installed.
# Maintenance reminder: we specifically do not strip binaries, as
# discussed in https://sqlite.org/forum/forumpost/9a67df63eda9925c.
INSTALL ?= install
# $(ENABLE_LIB_SHARED) =
# 1 if libsqlite3$(T.dll) should be built.
ENABLE_LIB_SHARED ?= 1
# $(ENABLE_LIB_STATIC) =
# 1 if libsqlite3$(T.lib) should be built. Some components,
# e.g. libtclsqlite3 and some test apps, implicitly require the static
# library and will ignore this preference.
ENABLE_LIB_STATIC ?= 1
# $(USE_AMALGAMATION)
# 1 if the amalgamation (sqlite3.c/h) should be built/used, otherwise
# the library is built from all of its original source files.
# Certain tools, like sqlite3$(T.exe), require the amalgamation and
# will ignore this preference.
USE_AMALGAMATION ?= 1
# $(LINK_TOOLS_DYNAMICALLY)
# If 1, certain binaries which typically statically link against
# libsqlite3 or its component object files will instead link against
# the DLL. The caveat is that running such builds from the source tree
# may require that the user specifically prepend "." to their
# $LD_LIBRARY_PATH so that the dynamic linker does not pick up a
# libsqlite3.so from outside the source tree. Alternately, symlinking
# the in-build-tree $(libsqlite3.DLL) to some dir in the system's
# library path will work for giving the apps access to the in-tree
LINK_TOOLS_DYNAMICALLY ?= 0
# $(AMALGAMATION_GEN_FLAGS) =
# Optional flags for the amalgamation generator.
AMALGAMATION_GEN_FLAGS ?= --linemacros=0
# EXTRA_SRC = list of C files to append as-is to the generated
# amalgamation. It should arguably be called AMALGAMATION_EXTRA_SRC
# but this older name is already in use by clients.
EXTRA_SRC ?=
# $(OPT_FEATURE_FLAGS) =
# Preprocessor flags for enabling and disabling specific libsqlite3
# features (-DSQLITE_OMIT*, -DSQLITE_ENABLE*). The same set of OMIT
# and ENABLE flags must be passed to the LEMON parser generator and
# the mkkeywordhash tool as well. This is normally set by the
# configure process, and passing a custom value to a
# configure-filtered Makefile may not work.
# When using the canonical makefile, add $(OPTIONS)=... on the make
# command line to append additional options to the
# $(OPT_FEATURE_FLAGS). Some flags, because they influence generation
# of the SQL parser, only work if the build is specifically configured
# to account for them. Adding them later, when compiling the
# amalgamation separately, may or may not work.
# $(OPTS)=... is another way of influencing C compilation. It is
# distinctly separate from $(OPTIONS) and $(OPT_FEATURE_FLAGS) but,
# like those, $(OPTS) applies to all invocations of $(T.cc) (and some
# invocations of $(B.cc)). The configure process does not set either
# of $(OPTIONS) or $(OPTS).
OPT_FEATURE_FLAGS ?=
# $(SHELL_OPT) =
# CFLAGS specific to the sqlite3 CLI shell app and its close cousins.
SHELL_OPT ?=
# TCL_CONFIG_SH must, for some of the build targets, refer to a valid
# tclConfig.sh. That script will be used to populate most of the other
# TCL-related vars the build needs. The core library does not require
# TCL, but TCL is needed for running tests and certain tools, e.g.
# sqlite3_analyzer.
TCL_CONFIG_SH ?=
# $(HAVE_WASI_SDK) =
# Set to 1 when building with the WASI SDK. This disables certain
# build targets. It is expected that the invoker sets $(CC), $(LD),
# and $(AR) to their counterparts from the wasi-sdk.
HAVE_WASI_SDK ?= 0
# ... and many, many more. Sane defaults are selected where possible.
# With the above-described defined, the rest of this make script will
# build the project's deliverables and testing tools.
################################################################################
all:	sqlite3.h sqlite3.c
########################################################################
########################################################################
# Modifying anything after this point should not be necessary for most
########################################################################
########################################################################
# $(CFLAGS.env) holds the any $(CFLAGS) provided at configure- or
# make-time (the latter overriding the former).
# $(CFLAGS) should ideally only contain flags which are relevant for
# all binaries built for the target platform. However, many people
# like to pass it to "make" without realizing that it applies to
# dozens of deliverables, and they override core flags (like -fPIC)
# when doing so. To help work around that, we expect all core-most
# CFLAGS, e.g. -fPIC, to be set in $(CFLAGS.core). That enables people
# to pass their other CFLAGS without triggering, e.g., "recompile with
# -fPIC" errors.
# Historical note: the pre-3.48 build does not honor CPPFLAGS passed
# to make, so we do not do so here. Both the legacy and 3.48+ builds
# support CPPFLAGS passed at configure-time, and combines them with
# the configure-time CFLAGS.
CFLAGS.core ?=
CFLAGS.env  = $(CFLAGS)
T.cc += $(CFLAGS.core) $(CFLAGS.env)
# $(LDFLAGS.configure) represents any LDFLAGS=... the client passes to
# the configure process.  The historical build enabled passing-on of
# user-provided LDFLAGS at configure-time but not make-time. That
# behavior is not possible to fully emulate here because this makefile
# is not filtered by the configure script, so we instead
# "soft-enforce" it by using a level of indirection, which clients who
# read this can (but are not advised to!) bypass by passing
# LDFLAGS.configure=... to this makefile. (We do not guaranty this
# variable name to be stable, so do not rely on that capability!)
# A significant difference from the legacy build:
# The legacy build applied such LDFLAGS to all link operations for all
# deliverables. The 3.48+ build applies them (as of this writing) more
# selectively: search this file LDFLAGS.configure to see where they're
LDFLAGS.configure ?=
# The difference between $(OPT_FEA
4D1C
TURE_FLAGS) and $(OPTS) is that the
# former is historically provided by the configure script, whereas
# $(OPTS) is intended to be provided as arguments to the make
# invocation.
T.cc += $(OPT_FEATURE_FLAGS)
# Add in any optional global compilation flags on the make command
# line i.e.  make "OPTS=-DSQLITE_ENABLE_FOO=1 -DSQLITE_OMIT_FOO=1".
T.cc += $(OPTS)
# $(INSTALL) invocation for use with non-executable files.
INSTALL.noexec = $(INSTALL) -m 0644
# ^^^ do not use GNU-specific flags to $(INSTALL), e.g. --mode=...
# T.compile.gcov = gcov-specific compilation flags for the target
# platform.
T.compile.gcov ?=
# T.link.gcov = gcov-specific link flags for the target platform.
T.link.gcov ?=
# $(T.compile) = generic target platform compiler invocation,
# differing only from $(T.cc) in that it appends $(T.compile.gcov),
# which is intended for use with gcov-related flags.
T.compile = $(T.cc) $(T.compile.gcov)
# Optionally set by the configure script to include -DSQLITE_DEBUG=1
# and other debug-related flags.
T.cc.TARGET_DEBUG ?=
# Extra CFLAGS for both the core sqlite3 components and extensions.
# Define -D_HAVE_SQLITE_CONFIG_H so that the code knows it
# can include the generated sqlite_cfg.h.
T.cc.sqlite.extras = -D_HAVE_SQLITE_CONFIG_H -DBUILD_sqlite $(T.cc.TARGET_DEBUG)
# $(T.cc.sqlite) is $(T.cc) plus any flags which are desired for the
# library as a whole, but not necessarily needed for every binary. It
# will normally get initially populated with flags by the
# configure-generated makefile.
T.cc.sqlite ?= $(T.compile) $(T.cc.sqlite.extras)
# $(CFLAGS.intree_includes) = -I... flags relevant specifically to
# this tree, including any subdirectories commonly needed for building
# various tools.
CFLAGS.intree_includes = \
    -I. -I$(TOP)/src -I$(TOP)/ext/rtree -I$(TOP)/ext/icu \
    -I$(TOP)/ext/fts3 -I$(TOP)/ext/session \
    -I$(TOP)/ext/misc
T.cc.sqlite += $(CFLAGS.intree_includes)
# $(T.cc.extension) = compiler invocation for loadable extensions.
T.cc.extension = $(T.compile) -I. -I$(TOP)/src $(T.cc.sqlite.extras) -DSQLITE_CORE
# $(T.link) = compiler invocation for when the target will be an
# executable.
# $(T.link.gcov) = optional config-specific flags for $(T.link),
# intended for use with gcov-related flags.
T.link = $(T.cc.sqlite) $(T.link.gcov)
# $(T.link.shared) = $(T.link) invocation specifically for shared libraries
T.link.shared = $(T.link) $(LDFLAGS.shlib)
# $(LDFLAGS.libsqlite3) should be used with any deliverable for which
# any of the following apply:
#  - Results in building libsqlite3.so
#  - Compiles sqlite3.c in to an application
#  - Links with libsqlite3.a
#  - Links in either of $(LIBOBJSO) or $(LIBOBJS1)
# Note that these flags are for the target build platform, not
# necessarily localhost.  i.e. it should be used with $(T.cc.sqlite)
# or $(T.link) but not $(B.cc).
LDFLAGS.libsqlite3 = \
  $(LDFLAGS.rpath) $(LDFLAGS.pthread) \
  $(LDFLAGS.math) $(LDFLAGS.dlopen) \
  $(LDFLAGS.zlib) $(LDFLAGS.icu) \
  $(LDFLAGS.rt) $(LDFLAGS.configure)
# $(install-dir.XYZ) = dirs for installation.
# Design note: these should arguably all be defined with surrounding
# double-quotes so that targets which have spaces in their paths will
# work, but that leads to Make treating the quotes as part of the dir
# name, which in turn leads to it never finding a matching name in the
# filesystem and always invoking ($(INSTALL) -d ...) for them. The
# moral of this story is that spaces in installation paths will break
# the install process.
install-dir.bin = $(DESTDIR)$(bindir)
install-dir.lib = $(DESTDIR)$(libdir)
install-dir.include = $(DESTDIR)$(includedir)
install-dir.pkgconfig = $(DESTDIR)$(libdir)/pkgconfig
install-dir.man1 = $(DESTDIR)$(mandir)/man1
install-dir.all = $(install-dir.bin) $(install-dir.include) \
  $(install-dir.lib) $(install-dir.man1) \
  $(install-dir.pkgconfig)
$(install-dir.all):
	@if [ ! -d "$@" ]; then set -x; $(INSTALL) -d "$@"; fi
# ^^^^ on some platforms, install -d fails if the target already exists.
# After jimsh is compiled, we run some sanity checks to ensure that
# it was built in a way compatible with this project's scripts:
# 1) Ensure that it was built with realpath() or _fullpath() support.
# Without that flag the [file normalize] command will always resolve
# to an empty string.
# 2) Ensure that it is built with -DJIM_COMPAT (which may be
# hard-coded into jimsh0.c). Without this, the [expr] command accepts
# only a single argument. (That said: the real fix for that is to
# update any scripts which still pass multiple arguments to [expr].)
$(JIMSH): $(TOP)/autosetup/jimsh0.c
	$(B.cc) -o $@ $(CFLAGS.jimsh) $(TOP)/autosetup/jimsh0.c
	@if [ x = "x$$($(JIMSH) -e 'file normalize $(JIMSH)' 2>/dev/null)" ]; then \
		echo "$(JIMSH) was built without -DHAVE_REALPATH or -DHAVE__FULLPATH." 1>&2; \
		exit 1; \
	@if [ x3 != "x$$($(JIMSH) -e 'expr 1 + 2' 2>/dev/null)" ]; then \
		echo "$(JIMSH) was built without -DJIM_COMPAT." 1>&2; \
		exit 1; \
distclean-jimsh:
	rm -f $(JIMSH)
distclean: distclean-jimsh
# $(MAKE_SANITY_CHECK) = a set of checks for various make vars which
# must be provided to this file before including it. If any are
# missing, this target fails. It does (almost) no semantic validation,
# only checks to see that appropriate vars are not empty.
# Note that $(MAKEFILE_LIST) is a GNU-make-ism but its use is harmless
# in other flavors of Make.
MAKE_SANITY_CHECK = .main.mk.checks
$(MAKE_SANITY_CHECK): $(MAKEFILE_LIST) $(TOP)/auto.def
	@if [ x = "x$(TOP)" ]; then echo "Missing TOP var" 1>&2; exit 1; fi
	@if [ ! -d "$(TOP)" ]; then echo "$(TOP) is not a directory" 1>&2; exit 1; fi
	@if [ ! -f "$(TOP)/auto.def" ]; then echo "$(TOP) does not appear to be the top-most source dir" 1>&2; exit 1; fi
	@if [ x = "x$(PACKAGE_VERSION)" ]; then echo "PACKAGE_VERSION must be set to the library's X.Y.Z-format version number" 1>&2; exit 1; fi
	@if [ x = "x$(B.cc)" ]; then echo "Missing B.cc var" 1>&2; exit 1; fi
	@if [ x = "x$(T.cc)" ]; then echo "Missing T.cc var" 1>&2; exit 1; fi
	@if [ x = "x$(B.tclsh)" ]; then echo "Missing B.tclsh var" 1>&2; exit 1; fi
	@if [ x = "x$(AR)" ]; then echo "Missing AR var" 1>&2; exit 1; fi
clean-sanity-check:
	rm -f $(MAKE_SANITY_CHECK)
clean: clean-sanity-check
# Object files for the SQLite library (non-amalgamation).
LIBOBJS0 = alter.o analyze.o attach.o auth.o \
         backup.o bitvec.o btmutex.o btree.o build.o \
         callback.o carray.o complete.o ctime.o \
         date.o dbpage.o dbstat.o delete.o \
         expr.o fault.o fkey.o \
         fts3.o fts3_aux.o fts3_expr.o fts3_hash.o fts3_icu.o \
         fts3_porter.o fts3_snippet.o fts3_tokenizer.o fts3_tokenizer1.o \
         fts3_tokenize_vtab.o \
         fts3_unicode.o fts3_unicode2.o fts3_write.o \
         fts5.o \
         func.o global.o hash.o \
         icu.o insert.o json.o legacy.o loadext.o \
         main.o malloc.o mem0.o mem1.o mem2.o mem3.o mem5.o \
         memdb.o memjournal.o \
         mutex.o mutex_noop.o mutex_unix.o mutex_w32.o \
         notify.o opcodes.o os.o os_kv.o os_unix.o os_win.o \
         pager.o parse.o pcache.o pcache1.o pragma.o prepare.o printf.o \
         random.o resolve.o rowset.o rtree.o \
         sqlite3session.o select.o sqlite3rbu.o status.o stmt.o \
         table.o threads.o tokenize.o treeview.o trigger.o \
         update.o upsert.o utf.o util.o vacuum.o \
         vdbe.o vdbeapi.o vdbeaux.o vdbeblob.o vdbemem.o vdbesort.o \
         vdbetrace.o vdbevtab.o vtab.o \
         wal.o walker.o where.o wherecode.o whereexpr.o \
         window.o
LIBOBJS = $(LIBOBJS0)
# Object files for the amalgamation.
LIBOBJS1 = sqlite3.o
# Determine the real value of LIBOBJ based on whether the amalgamation
# is enabled or not.
LIBOBJ = $(LIBOBJS$(USE_AMALGAMATION))
$(LIBOBJ): $(MAKE_SANITY_CHECK)
# All of the source code files.
  $(TOP)/src/alter.c \
  $(TOP)/src/analyze.c \
  $(TOP)/src/attach.c \
  $(TOP)/src/auth.c \
  $(TOP)/src/backup.c \
  $(TOP)/src/bitvec.c \
  $(TOP)/src/btmutex.c \
  $(TOP)/src/btree.c \
  $(TOP)/src/btree.h \
  $(TOP)/src/btreeInt.h \
  $(TOP)/src/build.c \
  $(TOP)/src/callback.c \
  $(TOP)/src/carray.c \
  $(TOP)/src/complete.c \
  ctime.c \
  $(TOP)/src/date.c \
  $(TOP)/src/dbpage.c \
  $(TOP)/src/dbstat.c \
  $(TOP)/src/delete.c \
  $(TOP)/src/expr.c \
  $(TOP)/src/fault.c \
  $(TOP)/src/fkey.c \
  $(TOP)/src/func.c \
  $(TOP)/src/global.c \
  $(TOP)/src/hash.c \
  $(TOP)/src/hash.h \
  $(TOP)/src/hwtime.h \
  $(TOP)/src/insert.c \
  $(TOP)/src/json.c \
  $(TOP)/src/legacy.c \
  $(TOP)/src/loadext.c \
  $(TOP)/src/main.c \
  $(TOP)/src/malloc.c \
  $(TOP)/src/mem0.c \
  $(TOP)/src/mem1.c \
  $(TOP)/src/mem2.c \
  $(TOP)/src/mem3.c \
  $(TOP)/src/mem5.c \
  $(TOP)/src/memdb.c \
  $(TOP)/src/memjournal.c \
  $(TOP)/src/msvc.h \
  $(TOP)/src/mutex.c \
  $(TOP)/src/mutex.h \
  $(TOP)/src/mutex_noop.c \
  $(TOP)/src/mutex_unix.c \
  $(TOP)/src/mutex_w32.c \
  $(TOP)/src/notify.c \
  $(TOP)/src/os.c \
  $(TOP)/src/os.h \
  $(TOP)/src/os_common.h \
  $(TOP)/src/os_setup.h \
  $(TOP)/src/os_kv.c \
  $(TOP)/src/os_unix.c \
  $(TOP)/src/os_win.c \
  $(TOP)/src/os_win.h \
  $(TOP)/src/pager.c \
  $(TOP)/src/pager.h \
  $(TOP)/src/parse.y \
  $(TOP)/src/pcache.c \
  $(TOP)/src/pcache.h \
  $(TOP)/src/pcache1.c \
  $(TOP)/src/pragma.c \
  pragma.h \
  $(TOP)/src/prepare.c \
  $(TOP)/src/printf.c \
  $(TOP)/src/random.c \
  $(TOP)/src/resolve.c \
  $(TOP)/src/rowset.c \
  $(TOP)/src/select.c \
  $(TOP)/src/status.c \
  $(TOP)/src/shell.c.in \
  $(TOP)/src/sqlite.h.in \
  $(TOP)/src/sqlite3ext.h \
  $(TOP)/src/sqliteInt.h \
  $(TOP)/src/sqliteLimit.h \
  $(TOP)/src/table.c \
  tclsqlite-ex.c \
  $(TOP)/src/threads.c \
  $(TOP)/src/tokenize.c \
  $(TOP)/src/treeview.c \
  $(TOP)/src/trigger.c \
  $(TOP)/src/utf.c \
  $(TOP)/src/update.c \
  $(TOP)/src/upsert.c \
  $(TOP)/src/util.c \
  $(TOP)/src/vacuum.c \
  $(TOP)/src/vdbe.c \
  $(TOP)/src/vdbe.h \
  $(TOP)/src/vdbeapi.c \
  $(TOP)/src/vdbeaux.c \
  $(TOP)/src/vdbeblob.c \
  $(TOP)/src/vdbemem.c \
  $(TOP)/src/vdbesort.c \
  $(TOP)/src/vdbetrace.c \
  $(TOP)/src/vdbevtab.c \
  $(TOP)/src/vdbeInt.h \
  $(TOP)/src/vtab.c \
  $(TOP)/src/vxworks.h \
  $(TOP)/src/wal.c \
  $(TOP)/src/wal.h \
  $(TOP)/src/walker.c \
  $(TOP)/src/where.c \
  $(TOP)/src/wherecode.c \
  $(TOP)/src/whereexpr.c \
  $(TOP)/src/whereInt.h \
  $(TOP)/src/window.c
# Source code for extensions
  $(TOP)/ext/fts3/fts3.c \
  $(TOP)/ext/fts3/fts3.h \
  $(TOP)/ext/fts3/fts3Int.h \
  $(TOP)/ext/fts3/fts3_aux.c \
  $(TOP)/ext/fts3/fts3_expr.c \
  $(TOP)/ext/fts3/fts3_hash.c \
  $(TOP)/ext/fts3/fts3_hash.h \
  $(TOP)/ext/fts3/fts3_icu.c \
  $(TOP)/ext/fts3/fts3_porter.c \
  $(TOP)/ext/fts3/fts3_snippet.c \
  $(TOP)/ext/fts3/fts3_tokenizer.h \
  $(TOP)/ext
85EA
/fts3/fts3_tokenizer.c \
  $(TOP)/ext/fts3/fts3_tokenizer1.c \
  $(TOP)/ext/fts3/fts3_tokenize_vtab.c \
  $(TOP)/ext/fts3/fts3_unicode.c \
  $(TOP)/ext/fts3/fts3_unicode2.c \
  $(TOP)/ext/fts3/fts3_write.c
  $(TOP)/ext/icu/sqliteicu.h \
  $(TOP)/ext/icu/icu.c
  $(TOP)/ext/rtree/rtree.h \
  $(TOP)/ext/rtree/rtree.c \
  $(TOP)/ext/rtree/geopoly.c
  $(TOP)/ext/session/sqlite3session.c \
  $(TOP)/ext/session/sqlite3session.h
  $(TOP)/ext/rbu/sqlite3rbu.h \
  $(TOP)/ext/rbu/sqlite3rbu.c
  $(TOP)/ext/misc/stmt.c
# Generated source code files
  keywordhash.h \
  opcodes.c \
  opcodes.h \
  parse.c \
  parse.h \
  sqlite_cfg.h \
  shell.c \
  sqlite3.h
# Source code to the test files.
TESTSRC = \
  $(TOP)/src/test1.c \
  $(TOP)/src/test2.c \
  $(TOP)/src/test3.c \
  $(TOP)/src/test4.c \
  $(TOP)/src/test5.c \
  $(TOP)/src/test6.c \
  $(TOP)/src/test8.c \
  $(TOP)/src/test9.c \
  $(TOP)/src/test_autoext.c \
  $(TOP)/src/test_backup.c \
  $(TOP)/src/test_bestindex.c \
  $(TOP)/src/test_blob.c \
  $(TOP)/src/test_btree.c \
  $(TOP)/src/test_config.c \
  $(TOP)/src/test_delete.c \
  $(TOP)/src/test_demovfs.c \
  $(TOP)/src/test_devsym.c \
  $(TOP)/src/test_fs.c \
  $(TOP)/src/test_func.c \
  $(TOP)/src/test_hexio.c \
  $(TOP)/src/test_init.c \
  $(TOP)/src/test_intarray.c \
  $(TOP)/src/test_journal.c \
  $(TOP)/src/test_malloc.c \
  $(TOP)/src/test_md5.c \
  $(TOP)/src/test_multiplex.c \
  $(TOP)/src/test_mutex.c \
  $(TOP)/src/test_onefile.c \
  $(TOP)/src/test_osinst.c \
  $(TOP)/src/test_pcache.c \
  $(TOP)/src/test_quota.c \
  $(TOP)/src/test_rtree.c \
  $(TOP)/src/test_schema.c \
  $(TOP)/src/test_superlock.c \
  $(TOP)/src/test_syscall.c \
  $(TOP)/src/test_tclsh.c \
  $(TOP)/src/test_tclvar.c \
  $(TOP)/src/test_thread.c \
  $(TOP)/src/test_vdbecov.c \
  $(TOP)/src/test_vfs.c \
  $(TOP)/src/test_window.c \
  $(TOP)/src/test_wsd.c       \
  $(TOP)/ext/fts3/fts3_term.c \
  $(TOP)/ext/fts3/fts3_test.c  \
  $(TOP)/ext/session/test_session.c \
  $(TOP)/ext/recover/sqlite3recover.c \
  $(TOP)/ext/recover/dbdata.c \
  $(TOP)/ext/recover/test_recover.c \
  $(TOP)/ext/intck/test_intck.c  \
  $(TOP)/ext/intck/sqlite3intck.c \
  $(TOP)/ext/rbu/test_rbu.c
# Statically linked extensions
TESTSRC += \
  $(TOP)/ext/expert/sqlite3expert.c \
  $(TOP)/ext/expert/test_expert.c \
  $(TOP)/ext/misc/amatch.c \
  $(TOP)/ext/misc/appendvfs.c \
  $(TOP)/ext/misc/basexx.c \
  $(TOP)/ext/misc/cksumvfs.c \
  $(TOP)/ext/misc/closure.c \
  $(TOP)/ext/misc/csv.c \
  $(TOP)/ext/misc/decimal.c \
  $(TOP)/ext/misc/eval.c \
  $(TOP)/ext/misc/explain.c \
  $(TOP)/ext/misc/fileio.c \
  $(TOP)/ext/misc/fuzzer.c \
  $(TOP)/ext/fts5/fts5_tcl.c \
  $(TOP)/ext/fts5/fts5_test_mi.c \
  $(TOP)/ext/fts5/fts5_test_tok.c \
  $(TOP)/ext/misc/ieee754.c \
  $(TOP)/ext/misc/mmapwarm.c \
  $(TOP)/ext/misc/nextchar.c \
  $(TOP)/ext/misc/normalize.c \
  $(TOP)/ext/misc/prefixes.c \
  $(TOP)/ext/misc/qpvtab.c \
  $(TOP)/ext/misc/randomjson.c \
  $(TOP)/ext/misc/regexp.c \
  $(TOP)/ext/misc/remember.c \
  $(TOP)/ext/misc/series.c \
  $(TOP)/ext/misc/spellfix.c \
  $(TOP)/ext/misc/stmtrand.c \
  $(TOP)/ext/misc/totype.c \
  $(TOP)/ext/misc/unionvtab.c \
  $(TOP)/ext/misc/wholenumber.c \
  $(TOP)/ext/misc/zipfile.c \
  $(TOP)/ext/rtree/test_rtreedoc.c
# Source code to the library files needed by the test fixture
TESTSRC2 = \
  $(TOP)/src/attach.c \
  $(TOP)/src/backup.c \
  $(TOP)/src/bitvec.c \
  $(TOP)/src/btree.c \
  $(TOP)/src/build.c \
  $(TOP)/src/carray.c \
  ctime.c \
  $(TOP)/src/date.c \
  $(TOP)/src/dbpage.c \
  $(TOP)/src/dbstat.c \
  $(TOP)/src/expr.c \
  $(TOP)/src/func.c \
  $(TOP)/src/global.c \
  $(TOP)/src/insert.c \
  $(TOP)/src/wal.c \
  $(TOP)/src/main.c \
  $(TOP)/src/mem5.c \
  $(TOP)/src/os.c \
  $(TOP)/src/os_kv.c \
  $(TOP)/src/os_unix.c \
  $(TOP)/src/os_win.c \
  $(TOP)/src/pager.c \
  $(TOP)/src/pragma.c \
  $(TOP)/src/prepare.c \
  $(TOP)/src/printf.c \
  $(TOP)/src/random.c \
  $(TOP)/src/pcache.c \
  $(TOP)/src/pcache1.c \
  $(TOP)/src/select.c \
  $(TOP)/src/tokenize.c \
  $(TOP)/src/treeview.c \
  $(TOP)/src/utf.c \
  $(TOP)/src/util.c \
  $(TOP)/src/vdbeapi.c \
  $(TOP)/src/vdbeaux.c \
  $(TOP)/src/vdbe.c \
  $(TOP)/src/vdbemem.c \
  $(TOP)/src/vdbetrace.c \
  $(TOP)/src/vdbevtab.c \
  $(TOP)/src/where.c \
  $(TOP)/src/wherecode.c \
  $(TOP)/src/whereexpr.c \
  $(TOP)/src/window.c \
  parse.c \
  $(TOP)/ext/fts3/fts3.c \
  $(TOP)/ext/fts3/fts3_aux.c \
  $(TOP)/ext/fts3/fts3_expr.c \
  $(TOP)/ext/fts3/fts3_tokenizer.c \
  $(TOP)/ext/fts3/fts3_write.c \
  $(TOP)/ext/session/sqlite3session.c \
  $(TOP)/ext/misc/stmt.c \
# Header files used by all library source files.
   $(TOP)/src/btree.h \
   $(TOP)/src/btreeInt.h \
   $(TOP)/src/hash.h \
   $(TOP)/src/hwtime.h \
   keywordhash.h \
   $(TOP)/src/msvc.h \
   $(TOP)/src/mutex.h \
   opcodes.h \
   $(TOP)/src/os.h \
   $(TOP)/src/os_common.h \
   $(TOP)/src/os_setup.h \
   $(TOP)/src/os_win.h \
   $(TOP)/src/pager.h \
   $(TOP)/src/pcache.h \
   parse.h  \
   pragma.h \
   sqlite3.h  \
   $(TOP)/src/sqlite3ext.h \
   $(TOP)/src/sqliteInt.h  \
   $(TOP)/src/sqliteLimit.h \
   $(TOP)/src/vdbe.h \
   $(TOP)/src/vdbeInt.h \
   $(TOP)/src/vxworks.h \
   $(TOP)/src/whereInt.h \
   sqlite_cfg.h
# Reminder: sqlite_cfg.h is typically created by the configure script
# Header files used by extensions
EXTHDR += \
  $(TOP)/ext/fts3/fts3.h \
  $(TOP)/ext/fts3/fts3Int.h \
  $(TOP)/ext/fts3/fts3_hash.h \
  $(TOP)/ext/fts3/fts3_tokenizer.h
EXTHDR += \
  $(TOP)/ext/rtree/rtree.h \
  $(TOP)/ext/rtree/geopoly.c
EXTHDR += \
  $(TOP)/ext/icu/sqliteicu.h
EXTHDR += \
  $(TOP)/ext/rtree/sqlite3rtree.h
# Executables needed for testing
TESTPROGS = \
  testfixture$(T.exe) \
  sqlite3$(T.exe) \
  sqlite3_analyzer$(T.exe) \
  sqldiff$(T.exe) \
  dbhash$(T.exe) \
  sqltclsh$(T.exe)
# Databases containing fuzzer test cases
FUZZDATA = \
  $(TOP)/test/fuzzdata1.db \
  $(TOP)/test/fuzzdata2.db \
  $(TOP)/test/fuzzdata3.db \
  $(TOP)/test/fuzzdata4.db \
  $(TOP)/test/fuzzdata5.db \
  $(TOP)/test/fuzzdata6.db \
  $(TOP)/test/fuzzdata7.db \
  $(TOP)/test/fuzzdata8.db
# Standard options to testfixture
TESTOPTS = --verbose=file --output=test-out.txt
FUZZERSHELL_OPT =
FUZZCHECK_OPT += -I$(TOP)/test
FUZZCHECK_OPT += -I$(TOP)/ext/recover
FUZZCHECK_OPT += \
  -DSQLITE_OSS_FUZZ \
  -DSQLITE_DECIMAL_MAX_DIGIT=1000 \
  -DSQLITE_ENABLE_BYTECODE_VTAB \
  -DSQLITE_ENABLE_CARRAY \
  -DSQLITE_ENABLE_DBPAGE_VTAB \
  -DSQLITE_ENABLE_DBSTAT_VTAB \
  -DSQLITE_ENABLE_DESERIALIZE \
  -DSQLITE_ENABLE_EXPLAIN_COMMENTS \
  -DSQLITE_ENABLE_FTS3_PARENTHESIS \
  -DSQLITE_ENABLE_FTS4 \
  -DSQLITE_ENABLE_FTS5 \
  -DSQLITE_ENABLE_GEOPOLY \
  -DSQLITE_ENABLE_MATH_FUNCTIONS \
  -DSQLITE_ENABLE_MEMSYS5 \
  -DSQLITE_ENABLE_NORMALIZE \
  -DSQLITE_ENABLE_OFFSET_SQL_FUNC \
  -DSQLITE_ENABLE_PERCENTILE \
  -DSQLITE_ENABLE_PREUPDATE_HOOK \
  -DSQLITE_ENABLE_RTREE \
  -DSQLITE_ENABLE_SESSION \
  -DSQLITE_ENABLE_STMTVTAB \
  -DSQLITE_ENABLE_UNKNOWN_SQL_FUNCTION \
  -DSQLITE_ENABLE_STAT4 \
  -DSQLITE_ENABLE_STMT_SCANSTATUS \
  -DSQLITE_JSON_MAX_DEPTH=500 \
  -DSQLITE_MAX_MEMORY=50000000 \
  -DSQLITE_MAX_MMAP_SIZE=0 \
  -DSQLITE_OMIT_LOAD_EXTENSION \
  -DSQLITE_PRINTF_PRECISION_LIMIT=1000 \
  -DSQLITE_PRIVATE="" \
  -DSQLITE_STRICT_SUBTYPE=1 \
  -DSQLITE_STATIC_RANDOMJSON
FUZZCHECK_SRC = sqlite3.c \
   $(TOP)/test/fuzzcheck.c \
   $(TOP)/test/ossfuzz.c \
   $(TOP)/test/fuzzinvariants.c \
   $(TOP)/ext/recover/dbdata.c \
   $(TOP)/ext/recover/sqlite3recover.c \
   $(TOP)/test/vt02.c \
   $(TOP)/ext/misc/base64.c \
   $(TOP)/ext/misc/base85.c \
View remainder of file in raw view
Provide feedback

Saved searches

Use saved searches to filter your results more quickly

FilesExpand file tree

main.mk

Latest commit

History

main.mk

File metadata and controls
