Parts that are marked as "not required" are not required to get the printer working but should be printed!
Parts marked with (e3d) can be found here: https://github.com/e3donline/ToolChanger
| Part name |
Quantity |
Material |
Required |
| xy-schrittmotor-halterung-links.stl |
1 |
PETG (or similar) |
✔️ |
| xy-schrittmotor-halterung-rechts.stl |
1 |
PETG (or similar) |
✔️ |
| xy-verbindungsstueck-v2-links.stl |
1 |
PETG (or similar) |
✔️ |
| xy-verbindungsstueck-v2-rechts.stl |
1 |
PETG (or similar) |
✔️ |
| umlenkrolle-halterung-v2.stl |
4 |
PETG (or similar) |
✔️ |
| Part name |
Quantity |
Material |
Required |
| x-schlitten.stl |
1 |
PETG (or similar) |
✔️ |
| Tool-Changer Cover Body.stl (e3d) |
1 |
- |
❌ |
| X-Carriage Cable Bracket.stl (e3d) |
1 |
- |
❌ |
| Part name |
Quantity |
Material |
Required |
| druckplatte-halterung-hinten.stl |
1 |
PETG (or similar) |
✔️ |
| druckplatte-halterung-vorne-links.stl |
1 |
PETG (or similar) |
✔️ |
| druckplatte-halterung-vorne-rechts.stl |
1 |
PETG (or similar) |
✔️ |
| z-motor-halterung.stl |
1 per z-motor |
- |
✔️ |
| Part name |
Quantity |
Material |
Required |
| v6-mount.stl |
1 per V6 tool |
PETG (or similar) |
✔️ |
| idle-tool-mount-abstandshalter.stl |
1 per V6 tool |
- |
✔️ |
| V6 PCF Duct (Winsinn).stl (e3d) |
1 per V6 tool |
PETG (or similar) |
❌ |
| V6 Cable Support.stl (e3d) |
1 per V6 tool |
- |
❌ |
| V6 PCF Fan Bracket.stl (e3d) |
1 per V6 tool |
PETG (or similar) |
❌ |
| V6 Receiver Top.stl (e3d) |
1 per V6 tool |
- |
❌ |
| Part name |
Quantity |
Material |
Required |
| netzteil-5v-abdeckung.stl |
1 |
- |
✔️ |
| relais-halterung.stl |
1 |
- |
✔️ |
| duex5-halterung-2020.stl |
2 |
- |
✔️ |
| Part name |
Quantity |
Material |
Required |
| bohr-vorlage.stl |
1 |
- |
✔️ |