python
diff --git a/‎Doc/library/collections.rst
Lines changed: 31 additions & 24 deletions b/‎Doc/library/collections.rst
Lines changed: 31 additions & 24 deletions
@@ -114,7 +114,7 @@ The class can be used to simulate nested scopes and is useful in templating.
       for templating is a read-only chain of mappings.  It also features
       pushing and popping of contexts similar to the
       :meth:`~collections.ChainMap.new_child` method and the
-      :meth:`~collections.ChainMap.parents` property.
+      :attr:`~collections.ChainMap.parents` property.
 
     * The `Nested Contexts recipe
       <https://code.activestate.com/recipes/577434/>`_ has options to control
@@ -270,7 +270,7 @@ For example::
 
         Return a list of the *n* most common elements and their counts from the
         most common to the least.  If *n* is omitted or ``None``,
-        :func:`most_common` returns *all* elements in the counter.
+        :meth:`most_common` returns *all* elements in the counter.
         Elements with equal counts are ordered arbitrarily:
 
             >>> Counter('abracadabra').most_common(3)  # doctest: +SKIP
@@ -357,20 +357,20 @@ or subtracting from an empty counter.
       restrictions on its keys and values.  The values are intended to be numbers
       representing counts, but you *could* store anything in the value field.
 
-    * The :meth:`most_common` method requires only that the values be orderable.
+    * The :meth:`~Counter.most_common` method requires only that the values be orderable.
 
     * For in-place operations such as ``c[key] += 1``, the value type need only
       support addition and subtraction.  So fractions, floats, and decimals would
       work and negative values are supported.  The same is also true for
-      :meth:`update` and :meth:`subtract` which allow negative and zero values
+      :meth:`~Counter.update` and :meth:`~Counter.subtract` which allow negative and zero values
       for both inputs and outputs.
 
     * The multiset methods are designed only for use cases with positive values.
       The inputs may be negative or zero, but only outputs with positive values
       are created.  There are no type restrictions, but the value type needs to
       support addition, subtraction, and comparison.
 
-    * The :meth:`elements` method requires integer counts.  It ignores zero and
+    * The :meth:`~Counter.elements` method requires integer counts.  It ignores zero and
       negative counts.
 
 .. seealso::
@@ -388,9 +388,9 @@ or subtracting from an empty counter.
       Section 4.6.3, Exercise 19*.
 
     * To enumerate all distinct multisets of a given size over a given set of
-      elements, see :func:`itertools.combinations_with_replacement`:
+      elements, see :func:`itertools.combinations_with_replacement`::
 
-            map(Counter, combinations_with_replacement('ABC', 2)) --> AA AB AC BB BC CC
+          map(Counter, combinations_with_replacement('ABC', 2)) # --> AA AB AC BB BC CC
 
 
 :class:`deque` objects
@@ -640,18 +640,18 @@ the :meth:`~deque.rotate` method::
                 # Remove an exhausted iterator.
                 iterators.popleft()
 
-The :meth:`rotate` method provides a way to implement :class:`deque` slicing and
+The :meth:`~deque.rotate` method provides a way to implement :class:`deque` slicing and
 deletion.  For example, a pure Python implementation of ``del d[n]`` relies on
-the :meth:`rotate` method to position elements to be popped::
+the ``rotate()`` method to position elements to be popped::
 
     def delete_nth(d, n):
         d.rotate(-n)
         d.popleft()
         d.rotate(n)
 
 To implement :class:`deque` slicing, use a similar approach applying
-:meth:`rotate` to bring a target element to the left side of the deque. Remove
-old entries with :meth:`popleft`, add new entries with :meth:`extend`, and then
+:meth:`~deque.rotate` to bring a target element to the left side of the deque. Remove
+old entries with :meth:`~deque.popleft`, add new entries with :meth:`~deque.extend`, and then
 reverse the rotation.
 With minor variations on that approach, it is easy to implement Forth style
 stack manipulations such as ``dup``, ``drop``, ``swap``, ``over``, ``pick``,
@@ -712,7 +712,7 @@ stack manipulations such as ``dup``, ``drop``, ``swap``, ``over``, ``pick``,
 :class:`defaultdict` Examples
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-Using :class:`list` as the :attr:`default_factory`, it is easy to group a
+Using :class:`list` as the :attr:`~defaultdict.default_factory`, it is easy to group a
 sequence of key-value pairs into a dictionary of lists:
 
     >>> s = [('yellow', 1), ('blue', 2), ('yellow', 3), ('blue', 4), ('red', 1)]
@@ -724,7 +724,7 @@ sequence of key-value pairs into a dictionary of lists:
     [('blue', [2, 4]), ('red', [1]), ('yellow', [1, 3])]
 
 When each key is encountered for the first time, it is not already in the
-mapping; so an entry is automatically created using the :attr:`default_factory`
+mapping; so an entry is automatically created using the :attr:`~defaultdict.default_factory`
 function which returns an empty :class:`list`.  The :meth:`list.append`
 operation then attaches the value to the new list.  When keys are encountered
 again, the look-up proceeds normally (returning the list for that key) and the
@@ -738,7 +738,7 @@ simpler and faster than an equivalent technique using :meth:`dict.setdefault`:
     >>> sorted(d.items())
     [('blue', [2, 4]), ('red', [1]), ('yellow', [1, 3])]
 
-Setting the :attr:`default_factory` to :class:`int` makes the
+Setting the :attr:`~defaultdict.default_factory` to :class:`int` makes the
 :class:`defaultdict` useful for counting (like a bag or multiset in other
 languages):
 
@@ -751,7 +751,7 @@ languages):
     [('i', 4), ('m', 1), ('p', 2), ('s', 4)]
 
 When a letter is first encountered, it is missing from the mapping, so the
-:attr:`default_factory` function calls :func:`int` to supply a default count of
+:attr:`~defaultdict.default_factory` function calls :func:`int` to supply a default count of
 zero.  The increment operation then builds up the count for each letter.
 
 The function :func:`int` which always returns zero is just a special case of
@@ -766,7 +766,7 @@ zero):
     >>> '%(name)s %(action)s to %(object)s' % d
     'John ran to <missing>'
 
-Setting the :attr:`default_factory` to :class:`set` makes the
+Setting the :attr:`~defaultdict.default_factory` to :class:`set` makes the
 :class:`defaultdict` useful for building a dictionary of sets:
 
     >>> s = [('red', 1), ('blue', 2), ('red', 3), ('blue', 4), ('red', 1), ('blue', 4)]
@@ -973,7 +973,7 @@ The subclass shown above sets ``__slots__`` to an empty tuple.  This helps
 keep memory requirements low by preventing the creation of instance dictionaries.
 
 Subclassing is not useful for adding new, stored fields.  Instead, simply
-create a new named tuple type from the :attr:`_fields` attribute:
+create a new named tuple type from the :attr:`~somenamedtuple._fields` attribute:
 
     >>> Point3D = namedtuple('Point3D', Point._fields + ('z',))
 
@@ -989,7 +989,7 @@ fields:
 .. versionchanged:: 3.5
    Property docstrings became writeable.
 
-Default values can be implemented by using :meth:`_replace` to
+Default values can be implemented by using :meth:`~somenamedtuple._replace` to
 customize a prototype instance:
 
     >>> Account = namedtuple('Account', 'owner balance transaction_count')
@@ -1200,15 +1200,22 @@ subclass directly from :class:`str`; however, this class can be easier
 to work with because the underlying string is accessible as an
 attribute.
 
-.. class:: UserString([sequence])
+.. class:: UserString(seq)
 
-    Class that simulates a string or a Unicode string object.  The instance's
+    Class that simulates a string object.  The instance's
     content is kept in a regular string object, which is accessible via the
     :attr:`data` attribute of :class:`UserString` instances.  The instance's
-    contents are initially set to a copy of *sequence*.  The *sequence* can
-    be an instance of :class:`bytes`, :class:`str`, :class:`UserString` (or a
-    subclass) or an arbitrary sequence which can be converted into a string using
-    the built-in :func:`str` function.
+    contents are initially set to a copy of *seq*.  The *seq* argument can
+    be any object which can be converted into a string using the built-in
+    :func:`str` function.
+
+    In addition to supporting the methods and operations of strings,
+    :class:`UserString` instances provide the following attribute:
+
+    .. attribute:: data
+
+        A real :class:`str` object used to store the contents of the
+        :class:`UserString` class.
 
     .. versionchanged:: 3.5
        New methods ``__getnewargs__``, ``__rmod__``, ``casefold``,