Description
Port, board and/or hardware
Raspberry Pi Pico WH
MicroPython version
MicroPython v1.24.0 on 2024-10-25; Raspberry Pi Pico W with RP2040
Reproduction
Attempt following code, both with lightsleep() having no ms argument and one with:
import machine
from machine import Pin, deepsleep, lightsleep
def wake_up(pin):
# Handle wake-up logic here
led.toggle()
print("Button pressed, waking up!")
# Configure buttons
button = Pin(11, Pin.IN, Pin.PULL_UP) # Example pin
led = Pin(20, Pin.OUT)
led.on()
# Set up interrupt
button.irq(trigger=Pin.IRQ_FALLING | Pin.IRQ_RISING, handler=wake_up)
# Go to sleep until a button is pressed
lightsleep()Expected behaviour
Expect LED to react to button press when asleep and execute wake_up function. LED is on by default. LED should toggle/turn off when button is pressed down, both when machine is asleep and not asleep.
Observed behaviour
USB power tester indicates that the board sleeps only when NO MILLISECONDS ARGUMENT IS SPECIFIED.
When milliseconds ARE SPECIFIED, board does not appear to sleep as power consumption does not drop according to the USB tester. The board continues to work at full power, and the LED reacts to the button.
When NO MILLISECONDS ARE SPECIFIED, board appears to go to sleep (reducing power from >10ma to 0-1ma. But button does not do anything to LED.
Additional Information
I have tried adding the wake argument to button.irq, but Micropython says that extra keyword arguments are present.
I understand sleeping may have issues on the Pico W models. I have also tried turning off WiFi/setting the pin associated with Wifi to "low". That does not seem to have any impact whatsoever, since my code never explicitly turns Wifi on
https://forums.raspberrypi.com/viewtopic.php?p=2266590#p2266590
Code of Conduct
Yes, I agree