stm32/board/NUCLEO_F746ZG: Enable Ethernet periph, lwip and ussl.

cristian · dpgeorge · commit cfec0540732b · 2019-09-11T11:20:58.000+10:00
diff --git a/ports/stm32/boards/NUCLEO_F746ZG/mpconfigboard.h b/ports/stm32/boards/NUCLEO_F746ZG/mpconfigboard.h
@@ -75,3 +75,14 @@
 #define MICROPY_HW_USB_FS              (1)
 #define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9)
 #define MICROPY_HW_USB_OTG_ID_PIN      (pin_A10)
+
+// Ethernet via RMII
+#define MICROPY_HW_ETH_MDC          (pin_C1)
+#define MICROPY_HW_ETH_MDIO         (pin_A2)
+#define MICROPY_HW_ETH_RMII_REF_CLK (pin_A1)
+#define MICROPY_HW_ETH_RMII_CRS_DV  (pin_A7)
+#define MICROPY_HW_ETH_RMII_RXD0    (pin_C4)
+#define MICROPY_HW_ETH_RMII_RXD1    (pin_C5)
+#define MICROPY_HW_ETH_RMII_TX_EN   (pin_G11)
+#define MICROPY_HW_ETH_RMII_TXD0    (pin_G13)
+#define MICROPY_HW_ETH_RMII_TXD1    (pin_B13)
diff --git a/ports/stm32/boards/NUCLEO_F746ZG/mpconfigboard.mk b/ports/stm32/boards/NUCLEO_F746ZG/mpconfigboard.mk
@@ -4,3 +4,8 @@ AF_FILE = boards/stm32f746_af.csv
 LD_FILES = boards/stm32f746.ld boards/common_ifs.ld
 TEXT0_ADDR = 0x08000000
 TEXT1_ADDR = 0x08020000
+
+# MicroPython settings
+MICROPY_PY_LWIP = 1
+MICROPY_PY_USSL = 1
+MICROPY_SSL_MBEDTLS = 1
diff --git a/ports/stm32/boards/NUCLEO_F746ZG/pins.csv b/ports/stm32/boards/NUCLEO_F746ZG/pins.csv
@@ -66,3 +66,12 @@ UART6_RX,PG9
 SPI_B_NSS,PA4
 SPI_B_SCK,PB3
 SPI_B_MOSI,PB5
+ETH_MDC,PC1
+ETH_MDIO,PA2
+ETH_RMII_REF_CLK,PA1
+ETH_RMII_CRS_DV,PA7
+ETH_RMII_RXD0,PC4
+ETH_RMII_RXD1,PC5
+ETH_RMII_TX_EN,PG11
+ETH_RMII_TXD0,PG13
+ETH_RMII_TXD1,PB13
