esp8266/espneopixel.c: Solve glitching LED issues with cpu at 80MHz.

EddieParis · dpgeorge · commit bc4441afa753 · 2016-11-07T17:13:49.000+11:00
At the WS2812 driver level, a 400ns value was used for T0H (time high to
send a 0 bit) but LED specification says it should be 350ns +- 150ns.
Due to loop overhead the 400ns value could lead to T0H close to 500ns
which is too close from the limit value and gave glitches (bad data to
pixels) in some cases.  This patch makes the calculated T0H value 350ns.
diff --git a/esp8266/espneopixel.c b/esp8266/espneopixel.c
@@ -33,7 +33,7 @@ void /*ICACHE_RAM_ATTR*/ esp_neopixel_write(uint8_t pin, uint8_t *pixels, uint32
 #ifdef NEO_KHZ400
   if(is800KHz) {
 #endif
-    time0  = fcpu / 2500000; // 0.4us
+    time0  = fcpu / 2857143; // 0.35us
     time1  = fcpu / 1250000; // 0.8us
     period = fcpu /  800000; // 1.25us per bit
 #ifdef NEO_KHZ400
