setup.py

"""
The matplotlib build options can be modified with a setup.cfg file. See
setup.cfg.template for more information.
"""

# NOTE: This file must remain Python 2 compatible for the foreseeable future,
# to ensure that we error out properly for people with outdated setuptools
# and/or pip.
import sys
from setuptools import setup
from setuptools.command.test import test as TestCommand
from setuptools.command.build_ext import build_ext as BuildExtCommand

if sys.version_info < (3, 5):
    error = """
Matplotlib 3.0+ does not support Python 2.x, 3.0, 3.1, 3.2, 3.3, or 3.4.
Beginning with Matplotlib 3.0, Python 3.5 and above is required.

This may be due to an out of date pip.

Make sure you have pip >= 9.0.1.
"""
    sys.exit(error)

# The setuptools version of sdist adds a setup.cfg file to the tree.
# We don't want that, so we simply remove it, and it will fall back to
# vanilla distutils.
try:
    from setuptools.command import sdist
except ImportError:
    pass
else:
    del sdist.sdist.make_release_tree

from distutils.dist import Distribution

import setupext
from setupext import print_line, print_raw, print_message, print_status

# Get the version from versioneer
import versioneer
__version__ = versioneer.get_version()


# These are the packages in the order we want to display them.  This
# list may contain strings to create section headers for the display.
mpl_packages = [
    'Building Matplotlib',
    setupext.Matplotlib(),
    setupext.Python(),
    setupext.Platform(),
    'Required dependencies and extensions',
    setupext.Numpy(),
    setupext.InstallRequires(),
    setupext.LibAgg(),
    setupext.FreeType(),
    setupext.FT2Font(),
    setupext.Png(),
    setupext.Qhull(),
    setupext.Image(),
    setupext.TTConv(),
    setupext.Path(),
    setupext.Contour(),
    setupext.QhullWrap(),
    setupext.Tri(),
    'Optional subpackages',
    setupext.SampleData(),
    setupext.Toolkits(),
    setupext.Tests(),
    setupext.Toolkits_Tests(),
    'Optional backend extensions',
    # These backends are listed in order of preference, the first
    # being the most preferred.  The first one that looks like it will
    # work will be selected as the default backend.
    setupext.BackendMacOSX(),
    setupext.BackendQt5(),
    setupext.BackendQt4(),
    setupext.BackendGtk3Agg(),
    setupext.BackendGtk3Cairo(),
    setupext.BackendTkAgg(),
    setupext.BackendWxAgg(),
    setupext.BackendAgg(),
    setupext.BackendCairo(),
    setupext.Windowing(),
    'Optional package data',
    setupext.Dlls(),
    ]


classifiers = [
    'Development Status :: 5 - Production/Stable',
    'Intended Audience :: Science/Research',
    'License :: OSI Approved :: Python Software Foundation License',
    'Programming Language :: Python',
    'Programming Language :: Python :: 3',
    'Programming Language :: Python :: 3.5',
    'Programming Language :: Python :: 3.6',
    'Programming Language :: Python :: 3.7',
    'Topic :: Scientific/Engineering :: Visualization',
    ]


class NoopTestCommand(TestCommand):
    def __init__(self, dist):
        print("Matplotlib does not support running tests with "
              "'python setup.py test'. Please run 'pytest'.")


class BuildExtraLibraries(BuildExtCommand):
    def run(self):
        # Remove the -Wstrict-prototypes option, it's not valid for C++.
        try:
            self.compiler.compiler_so.remove('-Wstrict-prototypes')
        except (ValueError, AttributeError):
            pass
        for package in good_packages:
            package.do_custom_build()
        return BuildExtCommand.run(self)


cmdclass = versioneer.get_cmdclass()
cmdclass['test'] = NoopTestCommand
cmdclass['build_ext'] = BuildExtraLibraries

# One doesn't normally see `if __name__ == '__main__'` blocks in a setup.py,
# however, this is needed on Windows to avoid creating infinite subprocesses
# when using multiprocessing.
if __name__ == '__main__':
    # These are distutils.setup parameters that the various packages add
    # things to.
    packages = []
    namespace_packages = []
    py_modules = []
    ext_modules = []
    package_data = {}
    package_dir = {'': 'lib'}
    install_requires = []
    setup_requires = []
    default_backend = None

    # If the user just queries for information, don't bother figuring out which
    # packages to build or install.
    if (any('--' + opt in sys.argv for opt in
            Distribution.display_option_names + ['help']) or
            'clean' in sys.argv):
        setup_requires = []
    else:
        # Go through all of the packages and figure out which ones we are
        # going to build/install.
        print_line()
        print_raw("Edit setup.cfg to change the build options")

        required_failed = []
        good_packages = []
        for package in mpl_packages:
            if isinstance(package, str):
                print_raw('')
                print_raw(package.upper())
            else:
                try:
                    result = package.check()
                    if result is not None:
                        message = 'yes [%s]' % result
                        print_status(package.name, message)
                except setupext.CheckFailed as e:
                    msg = str(e).strip()
                    if len(msg):
                        print_status(package.name, 'no  [%s]' % msg)
                    else:
                        print_status(package.name, 'no')
                    if not package.optional:
                        required_failed.append(package)
                else:
                    good_packages.append(package)
                    if (isinstance(package, setupext.OptionalBackendPackage)
                            and package.runtime_check()
                            and default_backend is None):
                        default_backend = package.name
        print_raw('')

        # Abort if any of the required packages can not be built.
        if required_failed:
            print_line()
            print_message("The following required packages can not be built: "
                          "%s" % ", ".join(x.name for x in required_failed))
            for pkg in required_failed:
                msg = pkg.install_help_msg()
                if msg:
                    print_message(msg)
            sys.exit(1)

        # Now collect all of the information we need to build all of the
        # packages.
        for package in good_packages:
            packages.extend(package.get_packages())
            namespace_packages.extend(package.get_namespace_packages())
            py_modules.extend(package.get_py_modules())
            ext = package.get_extension()
            if ext is not None:
                ext_modules.append(ext)
            data = package.get_package_data()
            for key, val in data.items():
                package_data.setdefault(key, [])
                package_data[key] = list(set(val + package_data[key]))
            install_requires.extend(package.get_install_requires())
            setup_requires.extend(package.get_setup_requires())

        # Write the default matplotlibrc file
        if default_backend is None:
            default_backend = 'svg'
        if setupext.options['backend']:
            default_backend = setupext.options['backend']
        with open('matplotlibrc.template') as fd:
            template = fd.read()
        with open('lib/matplotlib/mpl-data/matplotlibrc', 'w') as fd:
            fd.write(template)

        # Finalize the extension modules so they can get the Numpy include
        # dirs
        for mod in ext_modules:
            mod.finalize()

    # Finally, pass this all along to distutils to do the heavy lifting.
    setup(
        name="matplotlib",
        version=__version__,
        description="Python plotting package",
        author="John D. Hunter, Michael Droettboom",
        author_email="matplotlib-users@python.org",
        url="http://matplotlib.org",
        long_description="""
        Matplotlib strives to produce publication quality 2D graphics
        for interactive graphing, scientific publishing, user interface
        development and web application servers targeting multiple user
        interfaces and hardcopy output formats.
        """,
        license="BSD",
        packages=packages,
        namespace_packages=namespace_packages,
        platforms='any',
        py_modules=py_modules,
        ext_modules=ext_modules,
        package_dir=package_dir,
        package_data=package_data,
        classifiers=classifiers,
        download_url="http://matplotlib.org/users/installing.html",

        python_requires='>=3.5',
        # List third-party Python packages that we require
        install_requires=install_requires,
        setup_requires=setup_requires,

        # matplotlib has C/C++ extensions, so it's not zip safe.
        # Telling setuptools this prevents it from doing an automatic
        # check for zip safety.
        zip_safe=False,
        cmdclass=cmdclass,
    )