8000 Add files via upload · jamesbowman/circuitpython@cb7426b · GitHub
[go: up one dir, main page]
Skip to content

Commit cb7426b

Browse files
CircuitARTCircuitART
authored
Add files via upload
1 parent 16b6c88 commit cb7426b

File tree

5 files changed

+193
-0
lines changed

5 files changed

+193
-0
lines changed

‎ports/espressif/boards/circuitart_zero_s3/board.c

Lines changed: 9 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,9 @@
1+
// This file is part of the CircuitPython project: https://circuitpython.org
2+
//
3+
// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
4+
//
5+
// SPDX-License-Identifier: MIT
6+
7+
#include "supervisor/board.h"
8+
9+
// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.

‎ports/espressif/boards/circuitart_zero_s3/mpconfigboard.h

Lines changed: 34 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,34 @@
1+
// This file is part of the CircuitPython project: https://circuitpython.org
2+
//
3+
// SPDX-FileCopyrightText: Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
4+
//
5+
// SPDX-License-Identifier: MIT
6+
7+
#pragma once
8+
9+
// Micropython setup
10+
11+
#define MICROPY_HW_BOARD_NAME "CircuitART Zero S3"
12+
#define MICROPY_HW_MCU_NAME "ESP32S3"
13+
14+
#define MICROPY_HW_NEOPIXEL (&pin_GPIO47)
15+
//#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO39)
16+
17+
#define MICROPY_HW_LED_STATUS (&pin_GPIO46)
18+
19+
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO34)
20+
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO33)
21+
22+
#define DEFAULT_SPI_BUS_SCK (&pin_GPIO36)
23+
#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35)
24+
#define DEFAULT_SPI_BUS_MISO (&pin_GPIO37)
25+
26+
#define DEFAULT_UART_BUS_RX (&pin_GPIO44)
27+
#define DEFAULT_UART_BUS_TX (&pin_GPIO43)
28+
29+
#define DOUBLE_TAP_PIN (&pin_GPIO45)
30+
31+
#define DEFAULT_TF_CS (&pin_GPIO42)
32+
#define DEFAULT_TFT_CS (&pin_GPIO39)
33+
#define DEFAULT_TFT_DC (&pin_GPIO5)
34+
#define DEFAULT_TFT_RST (&pin_GPIO40)

‎ports/espressif/boards/circuitart_zero_s3/mpconfigboard.mk

Lines changed: 22 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,22 @@
1+
USB_VID = 0x303A
2+
USB_PID = 0x80DC
3+
USB_PRODUCT = "ZeroS3"
4+
USB_MANUFACTURER = "CircuiArt"
5+
6+
IDF_TARGET = esp32s3
7+
8+
CIRCUITPY_ESP_FLASH_SIZE = 16MB
9+
CIRCUITPY_ESP_FLASH_MODE = qio
10+
CIRCUITPY_ESP_FLASH_FREQ = 80m
11+
12+
CIRCUITPY_ESP_PSRAM_SIZE = 8MB
13+
CIRCUITPY_ESP_PSRAM_MODE = qio
14+
CIRCUITPY_ESP_PSRAM_FREQ = 80m
15+
16+
#CIRCUITPY_BITBANG_NEOPIXEL = 1
17+
18+
# Include these Python libraries in firmware.
19+
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel
20+
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_ST7789
21+
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_MAX1704x
22+
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_AHTx0

‎ports/espressif/boards/circuitart_zero_s3/pins.c

Lines changed: 113 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,113 @@
1+
// This file is part of the CircuitPython project: https://circuitpython.org
2+
//
3+
// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
4+
//
5+
// SPDX-License-Identifier: MIT
6+
7+
#include "py/objtuple.h"
8+
#include "shared-bindings/board/__init__.h"
9+
#include "shared-module/displayio/__init__.h"
10+
11+
static const mp_rom_obj_tuple_t camera_data_tuple = {
12+
{&mp_type_tuple},
13+
8,
14+
{
15+
MP_ROM_PTR(&pin_GPIO6),
16+
MP_ROM_PTR(&pin_GPIO7),
17+
MP_ROM_PTR(&pin_GPIO8),
18+
MP_ROM_PTR(&pin_GPIO9),
19+
MP_ROM_PTR(&pin_GPIO10),
20+
MP_ROM_PTR(&pin_GPIO11),
21+
MP_ROM_PTR(&pin_GPIO13),
22+
MP_ROM_PTR(&pin_GPIO14),
23+
}
24+
};
25+
26+
static const mp_rom_map_elem_t board_module_globals_table[] = {
27+
CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
28+
29+
{ MP_ROM_QSTR(MP_QSTR_IO0), MP_ROM_PTR(&pin_GPIO0) },
30+
{ MP_ROM_QSTR(MP_QSTR_IO1), MP_ROM_PTR(&pin_GPIO1) },
31+
{ MP_ROM_QSTR(MP_QSTR_IO2), MP_ROM_PTR(&pin_GPIO2) },
32+
{ MP_ROM_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_GPIO3) },
33+
{ MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) },
34+
{ MP_ROM_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) },
35+
{ MP_ROM_QSTR(MP_QSTR_IO6), MP_ROM_PTR(&pin_GPIO6) },
36+
{ MP_ROM_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO7) },
37+
{ MP_ROM_QSTR(MP_QSTR_IO8), MP_ROM_PTR(&pin_GPIO8) },
38+
{ MP_ROM_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) },
39+
{ MP_ROM_QSTR(MP_QSTR_IO10), MP_ROM_PTR(&pin_GPIO10) },
40+
{ MP_ROM_QSTR(MP_QSTR_IO11), MP_ROM_PTR(&pin_GPIO11) },
41+
{ MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) },
42+
{ MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) },
43+
{ MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) },
44+
{ MP_ROM_QSTR(MP_QSTR_IO15), MP_ROM_PTR(&pin_GPIO15) },
45+
{ MP_ROM_QSTR(MP_QSTR_IO16), MP_ROM_PTR(&pin_GPIO16) },
46+
{ MP_ROM_QSTR(MP_QSTR_IO17), MP_ROM_PTR(&pin_GPIO17) },
47+
{ MP_ROM_QSTR(MP_QSTR_IO18), MP_ROM_PTR(&pin_GPIO18) },
48+
{ MP_ROM_QSTR(MP_QSTR_IO38), MP_ROM_PTR(&pin_GPIO38) },
49+
{ MP_ROM_QSTR(MP_QSTR_IO39), MP_ROM_PTR(&pin_GPIO39) },
50+
{ MP_ROM_QSTR(MP_QSTR_IO40), MP_ROM_PTR(&pin_GPIO40) },
51+
{ MP_ROM_QSTR(MP_QSTR_IO41), MP_ROM_PTR(&pin_GPIO41) },
52+
53+
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO33) },
54+
{ MP_ROM_QSTR(MP_QSTR_IO33), MP_ROM_PTR(&pin_GPIO33) },
55+
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO34) },
56+
{ MP_ROM_QSTR(MP_QSTR_IO34), MP_ROM_PTR(&pin_GPIO34) },
57+
58+
{ MP_ROM_QSTR(MP_QSTR_IO35), MP_ROM_PTR(&pin_GPIO35) },
59+
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO35) },
60+
{ MP_ROM_QSTR(MP_QSTR_IO36), MP_ROM_PTR(&pin_GPIO36) },
61+
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO36) },
62+
{ MP_ROM_QSTR(MP_QSTR_IO37), MP_ROM_PTR(&pin_GPIO37) },
63+
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO37) },
64+
65+
{ MP_ROM_QSTR(MP_QSTR_IO43), MP_ROM_PTR(&pin_GPIO43) },
66+
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) },
67+
{ MP_ROM_QSTR(MP_QSTR_IO44), MP_ROM_PTR(&pin_GPIO44) },
68+
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) },
69+
70+
// TFT
71+
{ MP_ROM_QSTR(MP_QSTR_TFT_CS), MP_ROM_PTR(&pin_GPIO39) },
72+
{ MP_ROM_QSTR(MP_QSTR_TFT_DC), MP_ROM_PTR(&pin_GPIO5) },
73+
{ MP_ROM_QSTR(MP_QSTR_TFT_RESET), MP_ROM_PTR(&pin_GPIO40) },
74+
75+
// sd card reader
76+
{ MP_ROM_QSTR(MP_QSTR_CARD_CS), MP_ROM_PTR(&pin_GPIO42) },
77+
78+
// Green LED
79+
{ MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO46) },
80+
81+
//NeoPixels x4
82+
{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO47) },
83+
84+
// Camera LDO Enable
85+
{ MP_ROM_QSTR(MP_QSTR_CAM_LDO_EN), MP_ROM_PTR(&pin_GPIO21) },
86+
87+
{ MP_ROM_QSTR(MP_QSTR_CAMERA_DATA), MP_ROM_PTR(&camera_data_tuple) },
88+
89+
{ MP_ROM_QSTR(MP_QSTR_CAMERA_VSYNC), MP_ROM_PTR(&pin_GPIO38) },
90+
{ MP_ROM_QSTR(MP_QSTR_CAMERA_HREF), MP_ROM_PTR(&pin_GPIO48) },
91+
{ MP_ROM_QSTR(MP_QSTR_CAMERA_DATA9), MP_ROM_PTR(&pin_GPIO14) },
92+
{ MP_ROM_QSTR(MP_QSTR_CAMERA_XCLK), MP_ROM_PTR(&pin_GPIO15) },
93+
{ MP_ROM_QSTR(MP_QSTR_CAMERA_DATA8), MP_ROM_PTR(&pin_GPIO13) },
94+
{ MP_ROM_QSTR(MP_QSTR_CAMERA_DATA7), MP_ROM_PTR(&pin_GPIO11) },
95+
{ MP_ROM_QSTR(MP_QSTR_CAMERA_PCLK), MP_ROM_PTR(&pin_GPIO16) },
96+
{ MP_ROM_QSTR(MP_QSTR_CAMERA_DATA6), MP_ROM_PTR(&pin_GPIO10) },
97+
{ MP_ROM_QSTR(MP_QSTR_CAMERA_DATA2), MP_ROM_PTR(&pin_GPIO6) },
98+
{ MP_ROM_QSTR(MP_QSTR_CAMERA_DATA5), MP_ROM_PTR(&pin_GPIO9) },
99+
{ MP_ROM_QSTR(MP_QSTR_CAMERA_DATA3), MP_ROM_PTR(&pin_GPIO7) },
100+
{ MP_ROM_QSTR(MP_QSTR_CAMERA_DATA4), MP_ROM_PTR(&pin_GPIO8) },
101+
//{ MP_ROM_QSTR(MP_QSTR_CAMERA_RESET), MP_ROM_PTR(&pin_GPIO47) },
102+
//{ MP_ROM_QSTR(MP_QSTR_CAMERA_PWDN), MP_ROM_PTR(&pin_GPIO21) },
103+
104+
// I2C
105+
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
106+
107+
// SPI
108+
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
109+
110+
// UART
111+
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
112+
};
113+
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

‎ports/espressif/boards/circuitart_zero_s3/sdkconfig

Lines changed: 15 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,15 @@
1+
#
2+
# Espressif IoT Development Framework Configuration
3+
#
4+
#
5+
# Component config
6+
#
7+
#
8+
# LWIP
9+
#
10+
CONFIG_LWIP_LOCAL_HOSTNAME="CircuitART Zero S3"
11+
# end of LWIP
12+
13+
# end of Component config
14+
15+
# end of Espressif IoT Development Framework Configuration

0 commit comments

Comments
 (0)
0