Arduino core for ESP32 WiFi chip

Need help or have a question? Join the chat at

Development Status
Installation Instructions:
ESP32Dev Board PINMAP

Development Status

Most of the framework is implemented. Most noticable is the missing analogWrite. While analogWrite is on it's way, there are a few other options that you can use:

16 channels LEDC which is PWM
8 channels SigmaDelta which uses SigmaDelta modulation
2 channels DAC which gives real analog output

Installation Instructions

Using through Arduino IDE

Instructions for Windows

Instructions for Mac

Install latest Arduino IDE from arduino.cc

Open Terminal and execute the following command (copy->paste and hit enter):

mkdir -p ~/Documents/Arduino/hardware/espressif && \
cd ~/Documents/Arduino/hardware/espressif && \
git clone https://github.com/espressif/arduino-esp32.git esp32 && \
cd esp32/tools/ && \
python get.py

Restart Arduino IDE

Instructions for Debian/Ubuntu Linux

Install latest Arduino IDE from arduino.cc

Open Terminal and execute the following command (copy->paste and hit enter):

sudo usermod -a -G dialout $USER && \
sudo apt-get install git && \
wget https://bootstrap.pypa.io/get-pip.py && \
sudo python get-pip.py && \
sudo pip install pyserial && \
mkdir -p ~/Arduino/hardware/espressif && \
cd ~/Arduino/hardware/espressif && \
git clone https://github.com/espressif/arduino-esp32.git esp32 && \
cd esp32/tools/ && \
python get.py

Restart Arduino IDE

Instructions for Fedora

Install the latest Arduino IDE from arduino.cc. $ sudo dnf -y install arduino will most likely install an older release.

Open Terminal and execute the following command (copy->paste and hit enter):

sudo usermod -a -G dialout $USER && \
sudo dnf install git python3-pip python3-pyserial && \
mkdir -p ~/Arduino/hardware/espressif && \
cd ~/Arduino/hardware/espressif && \
git clone https://github.com/espressif/arduino-esp32.git esp32 && \
cd esp32/tools/ && \
python get.py

Restart Arduino IDE

Decoding exceptions

You can use EspExceptionDecoder to get meaningful call trace.

Using PlatformIO

PlatformIO is an open source ecosystem for IoT development with cross platform build system, library manager and full support for Espressif ESP32 development. It works on the popular host OS: Mac OS X, Windows, Linux 32/64, Linux ARM (like Raspberry Pi, BeagleBone, CubieBoard).

Building with make

makeEspArduino is a generic makefile for any ESP8266/ESP32 Arduino project. Using make instead of the Arduino IDE makes it easier to do automated and production builds.

Using as ESP-IDF component

Download and install esp-idf
Create blank idf project (from one of the examples)

in the project folder, create a folder called components and clone this repository inside

mkdir -p components && \
cd components && \
git clone https://github.com/espressif/arduino-esp32.git arduino && \
cd .. && \
make menuconfig

make menuconfig has some Arduino options
- "Autostart Arduino setup and loop on boot"
  - If you enable this options, your main.cpp should be formated like any other sketch
```
//file: main.cpp
#include "Arduino.h"

void setup(){
  Serial.begin(115200);
}

void loop(){
  Serial.println("loop");
  delay(1000);
}
```
  - Else you need to implement app_main() and call initArduino(); in it.
    
    Keep in mind that setup() and loop() will not be called in this case. If you plan to base your code on examples provided in esp-idf, please make sure move the app_main() function in main.cpp from the files in the example.
```
//file: main.cpp
#include "Arduino.h"

extern "C" void app_main()
{
    initArduino();
    pinMode(4, OUTPUT);
    digitalWrite(4, HIGH);
    //do your own thing
}
```
- "Disable mutex locks for HAL"
  - If enabled, there will be no protection on the drivers from concurently accessing them from another thread/interrupt/core
- "Autoconnect WiFi on boot"
  - If enabled, WiFi will start with the last known configuration
  - Else it will wait for WiFi.begin
make flash monitor will build, upload and open serial monitor to your board

ESP32Dev Board PINMAP

Hint

Sometimes to program ESP32 via serial you must keep GPIO0 LOW during the programming process