sqlite/Makefile.msc at zonefile · dbstack/sqlite

2472 lines (2107 loc) · 73.8 KB
2
# nmake Makefile for SQLite
###############################################################################
############################## START OF OPTIONS ###############################
###############################################################################
# The toplevel directory of the source tree.  This is the directory
# that contains this "Makefile.msc".
# Set this non-0 to create and use the SQLite amalgamation file.
!IFNDEF USE_AMALGAMATION
USE_AMALGAMATION = 1
# <</mark>>
# Set this non-0 to enable full warnings (-W4, etc) when compiling.
!IFNDEF USE_FULLWARN
USE_FULLWARN = 1
# Set this non-0 to enable treating warnings as errors (-WX, etc) when
# compiling.
!IFNDEF USE_FATAL_WARN
USE_FATAL_WARN = 0
# Set this non-0 to enable full runtime error checks (-RTC1, etc).  This
# has no effect if (any) optimizations are enabled.
!IFNDEF USE_RUNTIME_CHECKS
USE_RUNTIME_CHECKS = 0
# Set this non-0 to create a SQLite amalgamation file that excludes the
# various built-in extensions.
!IFNDEF MINIMAL_AMALGAMATION
MINIMAL_AMALGAMATION = 0
# Set this non-0 to use "stdcall" calling convention for the core library
# and shell executable.
!IFNDEF USE_STDCALL
USE_STDCALL = 0
# Set this non-0 to have the shell executable link against the core dynamic
# link library.
!IFNDEF DYNAMIC_SHELL
DYNAMIC_SHELL = 0
# Set this non-0 to enable extra code that attempts to detect misuse of the
# SQLite API.
!IFNDEF API_ARMOR
API_ARMOR = 0
# If necessary, create a list of harmless compiler warnings to disable when
# compiling the various tools.  For the SQLite source code itself, warnings,
# if any, will be disabled from within it.
!IFNDEF NO_WARN
!IF $(USE_FULLWARN)!=0
NO_WARN = -wd4054 -wd4055 -wd4100 -wd4127 -wd4130 -wd4152 -wd4189 -wd4206
NO_WARN = $(NO_WARN) -wd4210 -wd4232 -wd4305 -wd4306 -wd4702 -wd4706
# Set this non-0 to use the library paths and other options necessary for
# Windows Phone 8.1.
!IFNDEF USE_WP81_OPTS
USE_WP81_OPTS = 0
# Set this non-0 to split the SQLite amalgamation file into chunks to
# be used for debugging with Visual Studio.
!IFNDEF SPLIT_AMALGAMATION
SPLIT_AMALGAMATION = 0
# Set this non-0 to have this makefile assume the Tcl shell executable
# (tclsh*.exe) is available in the PATH.  By default, this is disabled
# for compatibility with older build environments.  This setting only
# applies if TCLSH_CMD is not set manually.
!IFNDEF USE_TCLSH_IN_PATH
USE_TCLSH_IN_PATH = 0
# Set this non-0 to use zlib, possibly compiling it from source code.
!IFNDEF USE_ZLIB
USE_ZLIB = 0
# Set this non-0 to build zlib from source code.  This is enabled by
# default and in that case it will be assumed that the ZLIBDIR macro
# points to the top-level source code directory for zlib.
!IFNDEF BUILD_ZLIB
BUILD_ZLIB = 1
# Set this non-0 to use the International Components for Unicode (ICU).
!IFNDEF USE_ICU
USE_ICU = 0
# <</mark>>
# Set this non-0 to dynamically link to the MSVC runtime library.
!IFNDEF USE_CRT_DLL
USE_CRT_DLL = 0
# Set this non-0 to link to the RPCRT4 library.
!IFNDEF USE_RPCRT4_LIB
USE_RPCRT4_LIB = 0
# Set this non-0 to generate assembly code listings for the source code
!IFNDEF USE_LISTINGS
USE_LISTINGS = 0
# Set this non-0 to attempt setting the native compiler automatically
# for cross-compiling the command line tools needed during the compilation
!IFNDEF XCOMPILE
XCOMPILE = 0
# Set this non-0 to use the native libraries paths for cross-compiling
# the command line tools needed during the compilation process.
!IFNDEF USE_NATIVE_LIBPATHS
USE_NATIVE_LIBPATHS = 0
# Set this 0 to skip the compiling and embedding of version resources.
!IFNDEF USE_RC
# Set this non-0 to compile binaries suitable for the WinRT environment.
# This setting does not apply to any binaries that require Tcl to operate
# properly (i.e. the text fixture, etc).
!IFNDEF FOR_WINRT
FOR_WINRT = 0
# Set this non-0 to compile binaries suitable for the UWP environment.
# This setting does not apply to any binaries that require Tcl to operate
# properly (i.e. the text fixture, etc).
!IFNDEF FOR_UWP
FOR_UWP = 0
# Set this non-0 to compile binaries suitable for the Windows 10 platform.
!IFNDEF FOR_WIN10
FOR_WIN10 = 0
# Set this non-0 to skip attempting to look for and/or link with the Tcl
# runtime library.
!IFNDEF NO_TCL
# <</mark>>
# Set this to non-0 to create and use PDBs.
!IFNDEF SYMBOLS
SYMBOLS = 1
# Set this to non-0 to use the SQLite debugging heap subsystem.
!IFNDEF MEMDEBUG
MEMDEBUG = 0
# Set this to non-0 to use the Win32 native heap subsystem.
!IFNDEF WIN32HEAP
WIN32HEAP = 0
# Set this to non-0 to enable OSTRACE() macros, which can be useful when
# debugging.
!IFNDEF OSTRACE
OSTRACE = 0
# Set this to one of the following values to enable various debugging
# features.  Each level includes the debugging options from the previous
# levels.  Currently, the recognized values for DEBUG are:
# 0 == NDEBUG: Disables assert() and other runtime diagnostics.
# 1 == SQLITE_ENABLE_API_ARMOR: extra attempts to detect misuse of the API.
# 2 == Disables NDEBUG and all optimizations and then enables PDBs.
# 3 == SQLITE_DEBUG: Enables various diagnostics messages and code.
# 4 == SQLITE_WIN32_MALLOC_VALIDATE: Validate the Win32 native heap per call.
# 5 == SQLITE_DEBUG_OS_TRACE: Enables output from the OSTRACE() macros.
# 6 == SQLITE_ENABLE_IOTRACE: Enables output from the IOTRACE() macros.
!IFNDEF DEBUG
# Enable use of available compiler optimizations?  Normally, this should be
# non-zero.  Setting this to zero, thus disabling all compiler optimizations,
# can be useful for testing.
!IFNDEF OPTIMIZATIONS
OPTIMIZATIONS = 2
# Set this to non-0 to enable support for the session extension.
!IFNDEF SESSION
SESSION = 0
# Set the source code file to be used by executables and libraries when
# they need the amalgamation.
!IFNDEF SQLITE3C
!IF $(SPLIT_AMALGAMATION)!=0
SQLITE3C = sqlite3-all.c
SQLITE3C = sqlite3.c
# Set the include code file to be used by executables and libraries when
# they need SQLite.
!IFNDEF SQLITE3H
SQLITE3H = sqlite3.h
# This is the name to use for the SQLite dynamic link library (DLL).
!IFNDEF SQLITE3DLL
!IF $(FOR_WIN10)!=0
SQLITE3DLL = winsqlite3.dll
SQLITE3DLL = sqlite3.dll
# This is the name to use for the SQLite import library (LIB).
!IFNDEF SQLITE3LIB
!IF $(FOR_WIN10)!=0
SQLITE3LIB = winsqlite3.lib
SQLITE3LIB = sqlite3.lib
# This is the name to use for the SQLite shell executable (EXE).
!IFNDEF SQLITE3EXE
!IF $(FOR_WIN10)!=0
SQLITE3EXE = winsqlite3shell.exe
SQLITE3EXE = sqlite3.exe
# This is the argument used to set the program database (PDB) file for the
# SQLite shell executable (EXE).
!IFNDEF SQLITE3EXEPDB
!IF $(FOR_WIN10)!=0
SQLITE3EXEPDB =
SQLITE3EXEPDB = /pdb:sqlite3sh.pdb
# These are the names of the customized Tcl header files used by various parts
# of this makefile when the stdcall calling convention is in use.  It is not
# used for any other purpose.
!IFNDEF SQLITETCLH
SQLITETCLH = sqlite_tcl.h
!IFNDEF SQLITETCLDECLSH
SQLITETCLDECLSH = sqlite_tclDecls.h
# These are the additional targets that the targets that integrate with the
# Tcl library should depend on when compiling, etc.
!IFNDEF SQLITE_TCL_DEP
!IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0
SQLITE_TCL_DEP = $(SQLITETCLDECLSH) $(SQLITETCLH)
SQLITE_TCL_DEP =
# <</mark>>
# These are the "standard" SQLite compilation options used when compiling for
# the Windows platform.
!IFNDEF OPT_FEATURE_FLAGS
!IF $(MINIMAL_AMALGAMATION)==0
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_FTS3=1
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_RTREE=1
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_COLUMN_METADATA=1
# Should the session extension be enabled?  If so, add compilation options
# to enable it.
!IF $(SESSION)!=0
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_SESSION=1
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_PREUPDATE_HOOK=1
# These are the "extended" SQLite compilation options used when compiling for
# the Windows 10 platform.
!IFNDEF EXT_FEATURE_FLAGS
!IF $(FOR_WIN10)!=0
EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) -DSQLITE_ENABLE_FTS4=1
EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) -DSQLITE_SYSTEM_MALLOC=1
EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) -DSQLITE_OMIT_LOCALTIME=1
EXT_FEATURE_FLAGS =
###############################################################################
############################### END OF OPTIONS ################################
###############################################################################
# When compiling for the Windows 10 platform, the PLATFORM macro must be set
# to an appropriate value (e.g. x86, x64, arm, arm64, etc).
!IF $(FOR_WIN10)!=0
!IFNDEF PLATFORM
!ERROR Using the FOR_WIN10 option requires a value for PLATFORM.
# This assumes that MSVC is always installed in 32-bit Program Files directory
# and sets the variable for use in locating other 32-bit installs accordingly.
PROGRAMFILES_X86 = $(VCINSTALLDIR)\..\..
PROGRAMFILES_X86 = $(PROGRAMFILES_X86:\\=\)
# Check for the predefined command macro CC.  This should point to the compiler
# binary for the target platform.  If it is not defined, simply define it to
# the legacy default value 'cl.exe'.
CC = cl.exe
# Check for the predefined command macro CSC.  This should point to a working
# C Sharp compiler binary.  If it is not defined, simply define it to the
# legacy default value 'csc.exe'.
!IFNDEF CSC
CSC = csc.exe
# Check for the command macro LD.  This should point to the linker binary for
# the target platform.  If it is not defined, simply define it to the legacy
# default value 'link.exe'.
LD = link.exe
# Check for the predefined command macro RC.  This should point to the resource
# compiler binary for the target platform.  If it is not defined, simply define
# it to the legacy default value 'rc.exe'.
RC = rc.exe
# Check for the MSVC runtime library path macro.  Otherwise, this value will
# default to the 'lib' directory underneath the MSVC installation directory.
!IFNDEF CRTLIBPATH
CRTLIBPATH = $(VCINSTALLDIR)\lib
CRTLIBPATH = $(CRTLIBPATH:\\=\)
# Check for the command macro NCC.  This should point to the compiler binary
# for the platform the compilation process is taking place on.  If it is not
# defined, simply define it to have the same value as the CC macro.  When
# cross-compiling, it is suggested that this macro be modified via the command
# line (since nmake itself does not provide a built-in method to guess it).
# For example, to use the x86 compiler when cross-compiling for x64, a command
# line similar to the following could be used (all on one line):
#     nmake /f Makefile.msc sqlite3.dll
#           XCOMPILE=1 USE_NATIVE_LIBPATHS=1
# Alternatively, the full path and file name to the compiler binary for the
# platform the compilation process is taking place may be specified (all on
# one line):
#     nmake /f Makefile.msc sqlite3.dll
#           "NCC=""%VCINSTALLDIR%\bin\cl.exe"""
#           USE_NATIVE_LIBPATHS=1
NCC = $(NCC:\\=\)
!ELSEIF $(XCOMPILE)!=0
NCC = "$(VCINSTALLDIR)\bin\$(CC)"
NCC = $(NCC:\\=\)
NCC = $(CC)
# Check for the MSVC native runtime library path macro.  Otherwise,
# this value will default to the 'lib' directory underneath the MSVC
# installation directory.
!IFNDEF NCRTLIBPATH
NCRTLIBPATH = $(VCINSTALLDIR)\lib
NCRTLIBPATH = $(NCRTLIBPATH:\\=\)
# Check for the Platform SDK library path macro.  Otherwise, this
# value will default to the 'lib' directory underneath the Windows
# SDK installation directory (the environment variable used appears
# to be available when using Visual C++ 2008 or later via the
# command line).
!IFNDEF NSDKLIBPATH
NSDKLIBPATH = $(WINDOWSSDKDIR)\lib
NSDKLIBPATH = $(NSDKLIBPATH:\\=\)
# Check for the UCRT library path macro.  Otherwise, this value will
# default to the version-specific, platform-specific 'lib' directory
# underneath the Windows SDK installation directory.
!IFNDEF UCRTLIBPATH
UCRTLIBPATH = $(WINDOWSSDKDIR)\lib\$(WINDOWSSDKLIBVERSION)\ucrt\$(PLATFORM)
UCRTLIBPATH = $(UCRTLIBPATH:\\=\)
# C compiler and options for use in building executables that
# will run on the platform that is doing the build.
!IF $(USE_FULLWARN)!=0
BCC = $(NCC) -nologo -W4 $(CCOPTS) $(BCCOPTS)
BCC = $(NCC) -nologo -W3 $(CCOPTS) $(BCCOPTS)
# Check if assembly code listings should be generated for the source
# code files to be compiled.
!IF $(USE_LISTINGS)!=0
BCC = $(BCC) -FAcs
# Check if the native library paths should be used when compiling
# the command line tools used during the compilation process.  If
# so, set the necessary macro now.
!IF $(USE_NATIVE_LIBPATHS)!=0
NLTLIBPATHS = "/LIBPATH:$(NCRTLIBPATH)" "/LIBPATH:$(NSDKLIBPATH)"
!IFDEF NUCRTLIBPATH
NUCRTLIBPATH = $(NUCRTLIBPATH:\\=\)
NLTLIBPATHS = $(NLTLIBPATHS) "/LIBPATH:$(NUCRTLIBPATH)"
# C compiler and options for use in building executables that
# will run on the target platform.  (BCC and TCC are usually the
# same unless your are cross-compiling.)
!IF $(USE_FULLWARN)!=0
TCC = $(CC) -nologo -W4 -DINCLUDE_MSVC_H=1 $(CCOPTS) $(TCCOPTS)
TCC = $(CC) -nologo -W3 $(CCOPTS) $(TCCOPTS)
# Check if warnings should be treated as errors when compiling.
!IF $(USE_FATAL_WARN)!=0
TCC = $(TCC) -WX
TCC = $(TCC) -DSQLITE_OS_WIN=1 -I. -I$(TOP) -I$(TOP)\src -fp:precise
RCC = $(RC) -DSQLITE_OS_WIN=1 -I. -I$(TOP) -I$(TOP)\src $(RCOPTS) $(RCCOPTS)
# Check if we want to use the "stdcall" calling convention when compiling.
# This is not supported by the compilers for non-x86 platforms.  It should
# also be noted here that building any target with these "stdcall" options
# will most likely fail if the Tcl library is also required.  This is due
# to how the Tcl library functions are declared and exported (i.e. without
# an explicit calling convention, which results in "cdecl").
!IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0
!IF "$(PLATFORM)"=="x86"
CORE_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall
SHELL_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall
TEST_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall -DINCLUDE_SQLITE_TCL_H=1 -DSQLITE_TCLAPI=__cdecl
# <</mark>>
!IFNDEF PLATFORM
CORE_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall
SHELL_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall
TEST_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall -DINCLUDE_SQLITE_TCL_H=1 -DSQLITE_TCLAPI=__cdecl
# <</mark>>
CORE_CCONV_OPTS =
SHELL_CCONV_OPTS =
TEST_CCONV_OPTS =
# <</mark>>
CORE_CCONV_OPTS =
SHELL_CCONV_OPTS =
TEST_CCONV_OPTS =
# <</mark>>
# These are additional compiler options used for the core library.
!IFNDEF CORE_COMPILE_OPTS
!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS) -DSQLITE_API=__declspec(dllexport)
CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS)
# These are the additional targets that the core library should depend on
# when linking.
!IFNDEF CORE_LINK_DEP
!IF $(DYNAMIC_SHELL)!=0
CORE_LINK_DEP =
!ELSEIF $(FOR_WIN10)==0 || "$(PLATFORM)"=="x86"
CORE_LINK_DEP = sqlite3.def
CORE_LINK_DEP =
# These are additional linker options used for the core library.
!IFNDEF CORE_LINK_OPTS
!IF $(DYNAMIC_SHELL)!=0
CORE_LINK_OPTS =
!ELSEIF $(FOR_WIN10)==0 || "$(PLATFORM)"=="x86"
CORE_LINK_OPTS = /DEF:sqlite3.def
CORE_LINK_OPTS =
# These are additional compiler options used for the shell executable.
!IFNDEF SHELL_COMPILE_OPTS
!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
SHELL_COMPILE_OPTS = $(SHELL_CCONV_OPTS) -DSQLITE_API=__declspec(dllimport)
SHELL_COMPILE_OPTS = $(SHELL_CCONV_OPTS)
# This is the source code that the shell executable should be compiled
!IFNDEF SHELL_CORE_SRC
!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
SHELL_CORE_SRC =
SHELL_CORE_SRC = $(SQLITE3C)
# This is the core library that the shell executable should depend on.
!IFNDEF SHELL_CORE_DEP
!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
SHELL_CORE_DEP = $(SQLITE3DLL)
SHELL_CORE_DEP =
# If zlib support is enabled, add the dependencies for it.
!IF $(USE_ZLIB)!=0 && $(BUILD_ZLIB)!=0
SHELL_CORE_DEP = zlib $(SHELL_CORE_DEP)
TESTFIXTURE_DEP = zlib $(TESTFIXTURE_DEP)
# <</mark>>
# This is the core library that the shell executable should link with.
!IFNDEF SHELL_CORE_LIB
!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
SHELL_CORE_LIB = $(SQLITE3LIB)
SHELL_CORE_LIB =
# These are additional linker options used for the shell executable.
!IFNDEF SHELL_LINK_OPTS
SHELL_LINK_OPTS = $(SHELL_CORE_LIB)
# Check if assembly code listings should be generated for the source
# code files to be compiled.
!IF $(USE_LISTINGS)!=0
TCC = $(TCC) -FAcs
# When compiling the library for use in the WinRT environment,
# the following compile-time options must be used as well to
# disable use of Win32 APIs that are not available and to enable
# use of Win32 APIs that are specific to Windows 8 and/or WinRT.
!IF $(FOR_WINRT)!=0
TCC = $(TCC) -DSQLITE_OS_WINRT=1
RCC = $(RCC) -DSQLITE_OS_WINRT=1
TCC = $(TCC) -DWINAPI_FAMILY=WINAPI_FAMILY_APP
RCC = $(RCC) -DWINAPI_FAMILY=WINAPI_FAMILY_APP
# C compiler options for the Windows 10 platform (needs MSVC 2015).
!IF $(FOR_WIN10)!=0
TCC = $(TCC) /d2guard4 -D_ARM_WINAPI_PARTITION_DESKTOP_SDK_AVAILABLE
BCC = $(BCC) /d2guard4 -D_ARM_WINAPI_PARTITION_DESKTOP_SDK_AVAILABLE
# Also, we need to dynamically link to the correct MSVC runtime
# when compiling for WinRT (e.g. debug or release) OR if the
# USE_CRT_DLL option is set to force dynamically linking to the
# MSVC runtime library.
!IF $(FOR_WINRT)!=0 || $(USE_CRT_DLL)!=0
!IF $(DEBUG)>1
TCC = $(TCC) -MDd
BCC = $(BCC) -MDd
TCC = $(TCC) -MD
BCC = $(BCC) -MD
!IF $(DEBUG)>1
TCC = $(TCC) -MTd
BCC = $(BCC) -MTd
TCC = $(TCC) -MT
BCC = $(BCC) -MT
# The mksqlite3c.tcl and mksqlite3h.tcl scripts will pull in
# any extension header files by default.  For non-amalgamation
# builds, we need to make sure the compiler can find these.
!IF $(USE_AMALGAMATION)==0
TCC = $(TCC) -I$(TOP)\ext\fts3
RCC = $(RCC) -I$(TOP)\ext\fts3
TCC = $(TCC) -I$(TOP)\ext\rtree
RCC = $(RCC) -I$(TOP)\ext\rtree
TCC = $(TCC) -I$(TOP)\ext\session
RCC = $(RCC) -I$(TOP)\ext\session
# The mksqlite3c.tcl script accepts some options on the command
# line.  When compiling with debugging enabled, some of these
# options are necessary in order to allow debugging symbols to
# work correctly with Visual Studio when using the amalgamation.
!IFNDEF MKSQLITE3C_TOOL
!IF $(MINIMAL_AMALGAMATION)!=0
MKSQLITE3C_TOOL = $(TOP)\tool\mksqlite3c-noext.tcl
MKSQLITE3C_TOOL = $(TOP)\tool\mksqlite3c.tcl
!IFNDEF MKSQLITE3C_ARGS
!IF $(DEBUG)>1
MKSQLITE3C_ARGS = --linemacros
MKSQLITE3C_ARGS =
!IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0
MKSQLITE3C_ARGS = $(MKSQLITE3C_ARGS) --useapicall
# The mksqlite3h.tcl script accepts some options on the command line.
# When compiling with stdcall support, some of these options are
# necessary.
!IFNDEF MKSQLITE3H_ARGS
!IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0
MKSQLITE3H_ARGS = --useapicall
MKSQLITE3H_ARGS =
# <</mark>>
# Define -DNDEBUG to compile without debugging (i.e., for production usage)
# Omitting the define will cause extra debugging code to be inserted and
# includes extra comments when "EXPLAIN stmt" is used.
!IF $(DEBUG)==0
TCC = $(TCC) -DNDEBUG
BCC = $(BCC) -DNDEBUG
RCC = $(RCC) -DNDEBUG
!IF $(DEBUG)>0 || $(API_ARMOR)!=0 || $(FOR_WIN10)!=0
TCC = $(TCC) -DSQLITE_ENABLE_API_ARMOR=1
RCC = $(RCC) -DSQLITE_ENABLE_API_ARMOR=1
!IF $(DEBUG)>2
TCC = $(TCC) -DSQLITE_DEBUG=1
RCC = $(RCC) -DSQLITE_DEBUG=1
!IF $(DYNAMIC_SHELL)==0
TCC = $(TCC) -DSQLITE_ENABLE_WHERETRACE -DSQLITE_ENABLE_SELECTTRACE
RCC = $(RCC) -DSQLITE_ENABLE_WHERETRACE -DSQLITE_ENABLE_SELECTTRACE
!IF $(DEBUG)>4 || $(OSTRACE)!=0
TCC = $(TCC) -DSQLITE_FORCE_OS_TRACE=1 -DSQLITE_DEBUG_OS_TRACE=1
RCC = $(RCC) -DSQLITE_FORCE_OS_TRACE=1 -DSQLITE_DEBUG_OS_TRACE=1
!IF $(DEBUG)>5
TCC = $(TCC) -DSQLITE_ENABLE_IOTRACE=1
RCC = $(RCC) -DSQLITE_ENABLE_IOTRACE=1
# Prevent warnings about "insecure" MSVC runtime library functions
# being used.
TCC = $(TCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS
BCC = $(BCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS
RCC = $(RCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS
# Prevent warnings about "deprecated" POSIX functions being used.
TCC = $(TCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS
BCC = $(BCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS
RCC = $(RCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS
# Use the SQLite debugging heap subsystem?
!IF $(MEMDEBUG)!=0
TCC = $(TCC) -DSQLITE_MEMDEBUG=1
RCC = $(RCC) -DSQLITE_MEMDEBUG=1
# Use native Win32 heap subsystem instead of malloc/free?
!ELSEIF $(WIN32HEAP)!=0
TCC = $(TCC) -DSQLITE_WIN32_MALLOC=1
RCC = $(RCC) -DSQLITE_WIN32_MALLOC=1
# Validate the heap on every call into the native Win32 heap subsystem?
!IF $(DEBUG)>3
TCC = $(TCC) -DSQLITE_WIN32_MALLOC_VALIDATE=1
RCC = $(RCC) -DSQLITE_WIN32_MALLOC_VALIDATE=1
# The locations of the Tcl header and library files.  Also, the library that
# non-stubs enabled programs using Tcl must link against.  These variables
# (TCLINCDIR, TCLLIBDIR, and LIBTCL) may be overridden via the environment
# prior to running nmake in order to match the actual installed location and
# version on this machine.
!IFNDEF TCLDIR
TCLDIR = $(TOP)\compat\tcl
!IFNDEF TCLINCDIR
TCLINCDIR = $(TCLDIR)\include
!IFNDEF TCLLIBDIR
TCLLIBDIR = $(TCLDIR)\lib
!IFNDEF LIBTCL
LIBTCL = tcl86.lib
!IFNDEF LIBTCLSTUB
LIBTCLSTUB = tclstub86.lib
!IFNDEF LIBTCLPATH
LIBTCLPATH = $(TCLDIR)\bin
# The locations of the zlib header and library files.  These variables
# (ZLIBINCDIR, ZLIBLIBDIR, and ZLIBLIB) may be overridden via the environment
# prior to running nmake in order to match the actual installed (or source
# code) location on this machine.
!IFNDEF ZLIBDIR
ZLIBDIR = $(TOP)\compat\zlib
!IFNDEF ZLIBINCDIR
ZLIBINCDIR = $(ZLIBDIR)
!IFNDEF ZLIBLIBDIR
ZLIBLIBDIR = $(ZLIBDIR)
!IFNDEF ZLIBLIB
!IF $(DYNAMIC_SHELL)!=0
ZLIBLIB = zdll.lib
ZLIBLIB = zlib.lib
# The locations of the ICU header and library files.  These variables
# (ICUINCDIR, ICULIBDIR, and LIBICU) may be overridden via the environment
# prior to running nmake in order to match the actual installed location on
# this machine.
!IFNDEF ICUDIR
ICUDIR = $(TOP)\compat\icu
!IFNDEF ICUINCDIR
ICUINCDIR = $(ICUDIR)\include
!IFNDEF ICULIBDIR
ICULIBDIR = $(ICUDIR)\lib
!IFNDEF LIBICU
LIBICU = icuuc.lib icuin.lib
# This is the command to use for tclsh - normally just "tclsh", but we may
# know the specific version we want to use.  This variable (TCLSH_CMD) may be
# overridden via the environment prior to running nmake in order to select a
# specific Tcl shell to use.
!IFNDEF TCLSH_CMD
!IF $(USE_TCLSH_IN_PATH)!=0 || !EXIST("$(TCLDIR)\bin\tclsh.exe")
TCLSH_CMD = tclsh
TCLSH_CMD = $(TCLDIR)\bin\tclsh.exe
# <</mark>>
# Compiler options needed for programs that use the readline() library.
!IFNDEF READLINE_FLAGS
READLINE_FLAGS = -DHAVE_READLINE=0
# The library that programs using readline() must link against.
!IFNDEF LIBREADLINE
LIBREADLINE =
# Should the database engine be compiled threadsafe
TCC = $(TCC) -DSQLITE_THREADSAFE=1
RCC = $(RCC) -DSQLITE_THREADSAFE=1
# Do threads override each others locks by default (1), or do we test (-1)
TCC = $(TCC) -DSQLITE_THREAD_OVERRIDE_LOCK=-1
RCC = $(RCC) -DSQLITE_THREAD_OVERRIDE_LOCK=-1
# Any target libraries which libsqlite must be linked against
!IFNDEF TLIBS
# Flags controlling use of the in memory btree implementation
# SQLITE_TEMP_STORE is 0 to force temporary tables to be in a file, 1 to
# default to file, 2 to default to memory, and 3 to force temporary
# tables to always be in memory.
TCC = $(TCC) -DSQLITE_TEMP_STORE=1
RCC = $(RCC) -DSQLITE_TEMP_STORE=1
# Enable/disable loadable extensions, and other optional features
# based on configuration. (-DSQLITE_OMIT*, -DSQLITE_ENABLE*).
# The same set of OMIT and ENABLE flags should be passed to the
# LEMON parser generator and the mkkeywordhash tool as well.
# These are the required SQLite compilation options used when compiling for
# the Windows platform.
REQ_FEATURE_FLAGS = $(REQ_FEATURE_FLAGS) -DSQLITE_MAX_TRIGGER_DEPTH=100
# If we are linking to the RPCRT4 library, enable features that need it.
!IF $(USE_RPCRT4_LIB)!=0
REQ_FEATURE_FLAGS = $(REQ_FEATURE_FLAGS) -DSQLITE_WIN32_USE_UUID=1
# Add the required and optional SQLite compilation options into the command
# lines used to invoke the MSVC code and resource compilers.
TCC = $(TCC) $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(EXT_FEATURE_FLAGS)
RCC = $(RCC) $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(EXT_FEATURE_FLAGS)
# Add in any optional parameters specified on the commane line, e.g.
# nmake /f Makefile.msc all "OPTS=-DSQLITE_ENABLE_FOO=1 -DSQLITE_OMIT_FOO=1"
TCC = $(TCC) $(OPTS)
RCC = $(RCC) $(OPTS)
# If compiling for debugging, add some defines.
!IF $(DEBUG)>1
TCC = $(TCC) -D_DEBUG
BCC = $(BCC) -D_DEBUG
RCC = $(RCC) -D_DEBUG
# If optimizations are enabled or disabled (either implicitly or
# explicitly), add the necessary flags.
!IF $(DEBUG)>1 || $(OPTIMIZATIONS)==0
TCC = $(TCC) -Od
BCC = $(BCC) -Od
!IF $(USE_RUNTIME_CHECKS)!=0
View remainder of file in raw view
Provide feedback

Saved searches

Use saved searches to filter your results more quickly

FilesExpand file tree

Makefile.msc

Latest commit

History

Makefile.msc

File metadata and controls
