dagger82
diff --git a/‎boards.txt
Lines changed: 112 additions & 0 deletions b/‎boards.txt
Lines changed: 112 additions & 0 deletions
diff --git a/‎variants/Bee_Data_Logger/pins_arduino.h
Lines changed: 78 additions & 0 deletions b/‎variants/Bee_Data_Logger/pins_arduino.h
Lines changed: 78 additions & 0 deletions
@@ -20480,6 +20480,116 @@ department_of_alchemy_minimain_esp32s2.menu.EraseFlash.all.upload.erase_cmd=-e
 
 ##############################################################
 
+
+Bee_Data_Logger.name=Bee Data Logger
+Bee_Data_Logger.vid.0=0x303a
+Bee_Data_Logger.pid.0=815C
+
+Bee_Data_Logger.bootloader.tool=esptool_py
+Bee_Data_Logger.bootloader.tool.default=esptool_py
+
+Bee_Data_Logger.upload.tool=esptool_py
+Bee_Data_Logger.upload.tool.default=esptool_py
+Bee_Data_Logger.upload.tool.network=esp_ota
+
+Bee_Data_Logger.upload.maximum_size=1310720
+Bee_Data_Logger.upload.maximum_data_size=327680
+Bee_Data_Logger.upload.flags=
+Bee_Data_Logger.upload.extra_flags=
+Bee_Data_Logger.upload.use_1200bps_touch=true
+Bee_Data_Logger.upload.wait_for_upload_port=true
+Bee_Data_Logger.upload.speed=921600
+
+Bee_Data_Logger.serial.disableDTR=false
+Bee_Data_Logger.serial.disableRTS=false
+
+Bee_Data_Logger.build.tarch=xtensa
+Bee_Data_Logger.build.bootloader_addr=0x0
+Bee_Data_Logger.build.target=esp32s3
+Bee_Data_Logger.build.mcu=esp32s3
+Bee_Data_Logger.build.core=esp32
+Bee_Data_Logger.build.variant=Bee_Data_Logger
+Bee_Data_Logger.build.board=BEE_DATA_LOGGER
+
+Bee_Data_Logger.build.cdc_on_boot=1
+Bee_Data_Logger.build.msc_on_boot=1
+Bee_Data_Logger.build.dfu_on_boot=1
+Bee_Data_Logger.build.f_cpu=240000000L
+Bee_Data_Logger.build.flash_size=8MB
+Bee_Data_Logger.build.flash_freq=80m
+Bee_Data_Logger.build.flash_mode=dio
+Bee_Data_Logger.build.partitions=default_8MB
+Bee_Data_Logger.build.defines=
+Bee_Data_Logger.build.loop_core=-DARDUINO_RUNNING_CORE=1
+Bee_Data_Logger.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
+Bee_Data_Logger.build.boot=qio
+Bee_Data_Logger.build.partitions=default
+Bee_Data_Logger.build.defines=
+
+Bee_Data_Logger.menu.CDCOnBoot.default=Enabled
+Bee_Data_Logger.menu.CDCOnBoot.default.build.cdc_on_boot=1
+Bee_Data_Logger.menu.CDCOnBoot.dis_cdc=Disabled
+Bee_Data_Logger.menu.CDCOnBoot.dis_cdc.build.cdc_on_boot=0
+
+Bee_Data_Logger.menu.MSCOnBoot.default=Disabled
+Bee_Data_Logger.menu.MSCOnBoot.default.build.msc_on_boot=0
+Bee_Data_Logger.menu.MSCOnBoot.msc=Enabled
+Bee_Data_Logger.menu.MSCOnBoot.msc.build.msc_on_boot=1
+
+Bee_Data_Logger.menu.DFUOnBoot.default=Disabled
+Bee_Data_Logger.menu.DFUOnBoot.default.build.dfu_on_boot=0
+Bee_Data_Logger.menu.DFUOnBoot.dfu=Enabled
+Bee_Data_Logger.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
+
+Bee_Data_Logger.menu.USBMode.default=USB-OTG
+Bee_Data_Logger.menu.USBMode.default.build.usb_mode=0
+Bee_Data_Logger.menu.USBMode.default.upload.use_1200bps_touch=true
+Bee_Data_Logger.menu.USBMode.default.upload.wait_for_upload_port=true
+Bee_Data_Logger.menu.USBMode.hwcdc=Hardware CDC and JTAG
+Bee_Data_Logger.menu.USBMode.hwcdc.build.usb_mode=1
+Bee_Data_Logger.menu.USBMode.hwcdc.upload.use_1200bps_touch=false
+Bee_Data_Logger.menu.USBMode.hwcdc.upload.wait_for_upload_port=false
+
+Bee_Data_Logger.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
+Bee_Data_Logger.menu.PartitionScheme.default.build.partitions=default
+Bee_Data_Logger.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
+Bee_Data_Logger.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
+Bee_Data_Logger.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
+Bee_Data_Logger.menu.PartitionScheme.no_ota.build.partitions=no_ota
+Bee_Data_Logger.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
+Bee_Data_Logger.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
+Bee_Data_Logger.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
+Bee_Data_Logger.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
+Bee_Data_Logger.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
+Bee_Data_Logger.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
+Bee_Data_Logger.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
+Bee_Data_Logger.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
+Bee_Data_Logger.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
+Bee_Data_Logger.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
+Bee_Data_Logger.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
+Bee_Data_Logger.menu.PartitionScheme.huge_app.build.partitions=huge_app
+Bee_Data_Logger.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
+
+Bee_Data_Logger.menu.DebugLevel.none=None
+Bee_Data_Logger.menu.DebugLevel.none.build.code_debug=0
+Bee_Data_Logger.menu.DebugLevel.error=Error
+Bee_Data_Logger.menu.DebugLevel.error.build.code_debug=1
+Bee_Data_Logger.menu.DebugLevel.warn=Warn
+Bee_Data_Logger.menu.DebugLevel.warn.build.code_debug=2
+Bee_Data_Logger.menu.DebugLevel.info=Info
+Bee_Data_Logger.menu.DebugLevel.info.build.code_debug=3
+Bee_Data_Logger.menu.DebugLevel.debug=Debug
+Bee_Data_Logger.menu.DebugLevel.debug.build.code_debug=4
+Bee_Data_Logger.menu.DebugLevel.verbose=Verbose
+Bee_Data_Logger.menu.DebugLevel.verbose.build.code_debug=5
+
+Bee_Data_Logger.menu.EraseFlash.none=Disabled
+Bee_Data_Logger.menu.EraseFlash.none.upload.erase_cmd=
+Bee_Data_Logger.menu.EraseFlash.all=Enabled
+Bee_Data_Logger.menu.EraseFlash.all.upload.erase_cmd=-e
+
+############################################################
+
 Bee_Motion_S3.name=Bee Motion S3
 Bee_Motion_S3.vid.0=0x303a
 Bee_Motion_S3.pid.0=0x8113
@@ -22604,3 +22714,5 @@ crabik_slot_esp32_s3.menu.EraseFlash.all=Enabled
 crabik_slot_esp32_s3.menu.EraseFlash.all.upload.erase_cmd=-e
 
 ##############################################################
+
+
@@ -0,0 +1,78 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303A
+#define USB_PID 0x815C
+#define USB_MANUFACTURER "Smart Bee Designs"
+#define USB_PRODUCT "Bee Data Logger"
+#define USB_SERIAL ""
+
+#define EXTERNAL_NUM_INTERRUPTS 46
+#define NUM_DIGITAL_PINS        13
+#define NUM_ANALOG_INPUTS       7
+
+#define analogInputToDigitalPin(p)  (((p)<20)?(analogChannelToDigitalPin(p)):-1)
+#define digitalPinToInterrupt(p)    (((p)<48)?(p):-1)
+#define digitalPinHasPWM(p)         (p < 46)
+
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+static const uint8_t SDA = 37;
+static const uint8_t SCL = 36;
+
+static const uint8_t SS    = 47;
+static const uint8_t MOSI  = 46;
+static const uint8_t MISO  = 45;
+static const uint8_t SDO  = 35;
+static const uint8_t SDI  = 37;
+static const uint8_t SCK   = 48;
+
+static const uint8_t A3 = 3;
+static const uint8_t A4 = 4;
+static const uint8_t A5 = 5;
+static const uint8_t A6 = 6;
+static const uint8_t A7 = 7;
+static const uint8_t A8 = 8;
+static const uint8_t A9 = 9;
+
+
+static const uint8_t D3 = 3;
+static const uint8_t D4 = 4;
+static const uint8_t D5 = 5;
+static const uint8_t D6 = 6;
+static const uint8_t D7 = 7;
+static const uint8_t D8 = 8;
+static const uint8_t D9 = 9;
+static const uint8_t D38 = 38;
+static const uint8_t D39 = 39;
+static const uint8_t D41 = 41;
+static const uint8_t D42 = 42;
+static const uint8_t D43 = 43;
+static const uint8_t D44 = 44;
+
+
+static const uint8_t T3 = 3;
+static const uint8_t T4 = 4;
+static const uint8_t T5 = 5;
+static const uint8_t T6 = 6;
+static const uint8_t T7 = 7;
+static const uint8_t T8 = 8;
+static const uint8_t T9 = 9;
+static const uint8_t T10 = 10;
+static const uint8_t T11 = 11;
+static const uint8_t T12 = 12;
+static const uint8_t T13 = 13;
+static const uint8_t T14 = 14;
+
+static const uint8_t BOOT_BTN = 0;
+static const uint8_t VBAT_VOLTAGE = 1;
+static const uint8_t VBUS_SENSE = 2;
+static const uint8_t LDO2 = 34;
+static const uint8_t RGB_DATA = 40;
+static const uint8_t RGB_PWR = 34;
+
+
+#endif /* Pins_Arduino_h */