Create self-managed Amazon Linux nodes

This topic describes how you can launch Auto Scaling groups of Linux nodes that register with your Amazon EKS cluster.

This topic describes how you can launch Auto Scaling groups of Linux nodes that register with your Amazon EKS cluster. After the nodes join the cluster, you can deploy Kubernetes applications to them. You can also launch self-managed Amazon Linux nodes with eksctl or the {aws-management-console}. If you need to launch nodes on {aws} Outposts, see [eks-outposts-self-managed-nodes].

An existing Amazon EKS cluster. To deploy one, see [create-cluster]. If you have subnets in the {aws} Region where you have {aws} Outposts, {aws} Wavelength, or {aws} Local Zones enabled, those subnets must not have been passed in when you created your cluster.
An existing IAM role for the nodes to use. To create one, see [create-node-role]. If this role doesn’t have either of the policies for the VPC CNI, the separate role that follows is required for the VPC CNI pods.
(Optional, but recommended) The Amazon VPC CNI plugin for Kubernetes add-on configured with its own IAM role that has the necessary IAM policy attached to it. For more information, see [cni-iam-role].
Familiarity with the considerations listed in Choose an optimal Amazon EC2 node instance type. Depending on the instance type you choose, there may be additional prerequisites for your cluster and VPC.

You can launch self-managed Linux nodes using either of the following:

eksctl
{aws-management-console}

`eksctl`

Launch self-managed Linux nodes using eksctl

Install version {eksctl-min-version} or later of the eksctl command line tool installed on your device or {aws} CloudShell. To install or update eksctl, see Installation in the eksctl documentation.
(Optional) If the AmazonEKS_CNI_Policy managed IAM policy is attached to your Amazon EKS node IAM role, we recommend assigning it to an IAM role that you associate to the Kubernetes aws-node service account instead. For more information, see [cni-iam-role].

The following command creates a node group in an existing cluster. Replace al-nodes with a name for your node group. The node group name can’t be longer than 63 characters. It must start with letter or digit, but can also include hyphens and underscores for the remaining characters. Replace my-cluster with the name of your cluster. The name can contain only alphanumeric characters (case-sensitive) and hyphens. It must start with an alphanumeric character and can’t be longer than 100 characters. The name must be unique within the {aws} Region and {aws} account that you’re creating the cluster in. Replace the remaining example value with your own values. The nodes are created with the same Kubernetes version as the control plane, by default.

Before choosing a value for --node-type, review Choose an optimal Amazon EC2 node instance type.

Replace my-key with the name of your Amazon EC2 key pair or public key. This key is used to SSH into your nodes after they launch. If you don’t already have an Amazon EC2 key pair, you can create one in the {aws-management-console}. For more information, see Amazon EC2 key pairs in the Amazon EC2 User Guide.

Create your node group with the following command.

Important

If you want to deploy a node group to {aws} Outposts, Wavelength, or Local Zone subnets, there are additional considerations:

The subnets must not have been passed in when you created the cluster.
You must create the node group with a config file that specifies the subnets and volumeType: gp2. For more information, see Create a nodegroup from a config file and Config file schema in the eksctl documentation.

eksctl create nodegroup \
  --cluster my-cluster \
  --name al-nodes \
  --node-type t3.medium \
  --nodes 3 \
  --nodes-min 1 \
  --nodes-max 4 \
  --ssh-access \
  --managed=false \
  --ssh-public-key my-key

To deploy a node group that:

can assign a significantly higher number of IP addresses to Pods than the default configuration, see [cni-increase-ip-addresses].
can assign IPv4 addresses to Pods from a different CIDR block than that of the instance, see [cni-custom-network].
can assign IPv6 addresses to Pods and services, see [cni-ipv6].
don’t have outbound internet access, see [private-clusters].

For a complete list of all available options and defaults, enter the following command.
```
eksctl create nodegroup --help
```
If nodes fail to join the cluster, then see [worker-node-fail] in the Troubleshooting chapter.

An example output is as follows. Several lines are output while the nodes are created. One of the last lines of output is the following example line.
```
[✔]  created 1 nodegroup(s) in cluster "my-cluster"
```

(Optional) Deploy a sample application to test your cluster and Linux nodes.
We recommend blocking Pod access to IMDS if the following conditions are true:
- You plan to assign IAM roles to all of your Kubernetes service accounts so that Pods only have the minimum permissions that they need.
- No Pods in the cluster require access to the Amazon EC2 instance metadata service (IMDS) for other reasons, such as retrieving the current {aws} Region.
For more information, see Restrict access to the instance profile assigned to the worker node.

{aws-management-console}

Step 1: Launch self-managed Linux nodes using {aws-management-console}

Download the latest version of the {aws} CloudFormation template.

curl -O https://s3.us-west-2.amazonaws.com/amazon-eks/cloudformation/2022-12-23/amazon-eks-nodegroup.yaml

Wait for your cluster status to show as ACTIVE. If you launch your nodes before the cluster is active, the nodes fail to register with the cluster and you will have to relaunch them.
Open the {aws} CloudFormation console.
Choose Create stack and then select With new resources (standard).
For Specify template, select Upload a template file and then select Choose file.
Select the amazon-eks-nodegroup.yaml file that you downloaded.
Select Next.

On the Specify stack details page, enter the following parameters accordingly, and then choose Next:

Stack name: Choose a stack name for your {aws} CloudFormation stack. For example, you can call it my-cluster-nodes. The name can contain only alphanumeric characters (case-sensitive) and hyphens. It must start with an alphanumeric character and can’t be longer than 100 characters. The name must be unique within the {aws} Region and {aws} account that you’re creating the cluster in.
ClusterName: Enter the name that you used when you created your Amazon EKS cluster. This name must equal the cluster name or your nodes can’t join the cluster.
ClusterControlPlaneSecurityGroup: Choose the SecurityGroups value from the {aws} CloudFormation output that you generated when you created your VPC.

The following steps show one operation to retrieve the applicable group.
1. Open the Amazon EKS console.
2. Choose the name of the cluster.
3. Choose the Networking tab.
4. Use the Additional security groups value as a reference when selecting from the ClusterControlPlaneSecurityGroup dropdown list.
NodeGroupName: Enter a name for your node group. This name can be used later to identify the Auto Scaling node group that’s created for your nodes. The node group name can’t be longer than 63 characters. It must start with letter or digit, but can also include hyphens and underscores for the remaining characters.
NodeAutoScalingGroupMinSize: Enter the minimum number of nodes that your node Auto Scaling group can scale in to.
NodeAutoScalingGroupDesiredCapacity: Enter the desired number of nodes to scale to when your stack is created.
NodeAutoScalingGroupMaxSize: Enter the maximum number of nodes that your node Auto Scaling group can scale out to.
NodeInstanceType: Choose an instance type for your nodes. For more information, see [choosing-instance-type].

NodeImageIdSSMParam: Pre-populated with the Amazon EC2 Systems Manager parameter of a recent Amazon EKS optimized AMI for a variable Kubernetes version. To use a different Kubernetes minor version supported with Amazon EKS, replace 1.XX with a different supported version. We recommend specifying the same Kubernetes version as your cluster.

You can also replace amazon-linux-2 with a different AMI type. For more information, see [retrieve-ami-id].

Note

The Amazon EKS node AMIs are based on Amazon Linux. You can track security or privacy events for Amazon Linux 2 at the Amazon Linux Security Center or subscribe to the associated RSS feed. Security and privacy events include an overview of the issue, what packages are affected, and how to update your instances to correct the issue.

NodeImageId: (Optional) If you’re using your own custom AMI (instead of an Amazon EKS optimized AMI), enter a node AMI ID for your {aws} Region. If you specify a value here, it overrides any values in the NodeImageIdSSMParam field.
NodeVolumeSize: Specify a root volume size for your nodes, in GiB.
NodeVolumeType: Specify a root volume type for your nodes.
KeyName: Enter the name of an Amazon EC2 SSH key pair that you can use to connect using SSH into your nodes with after they launch. If you don’t already have an Amazon EC2 key pair, you can create one in the {aws-management-console}. For more information, see Amazon EC2 key pairs in the Amazon EC2 User Guide.

Note
If you don’t provide a key pair here, the {aws} CloudFormation stack creation fails.
BootstrapArguments: Specify any optional arguments to pass to the node bootstrap script, such as extra kubelet arguments. For more information, view the bootstrap script usage information on GitHub.

To deploy a node group that:
- can assign a significantly higher number of IP addresses to Pods than the default configuration, see [cni-increase-ip-addresses].
- can assign IPv4 addresses to Pods from a different CIDR block than that of the instance, see [cni-custom-network].
- can assign IPv6 addresses to Pods and services, see [cni-ipv6].
- don’t have outbound internet access, see [private-clusters].
DisableIMDSv1: By default, each node supports the Instance Metadata Service Version 1 (IMDSv1) and IMDSv2. You can disable IMDSv1. To prevent future nodes and Pods in the node group from using MDSv1, set DisableIMDSv1 to true. For more information about IMDS, see Configuring the instance metadata service. For more information about restricting access to it on your nodes, see Restrict access to the instance profile assigned to the worker node.
VpcId: Enter the ID for the VPC that you created.

Subnets: Choose the subnets that you created for your VPC. If you created your VPC using the steps that are described in Create an Amazon VPC for your Amazon EKS cluster, specify only the private subnets within the VPC for your nodes to launch into. You can see which subnets are private by opening each subnet link from the Networking tab of your cluster.

Important

If any of the subnets are public subnets, then they must have the automatic public IP address assignment setting enabled. If the setting isn’t enabled for the public subnet, then any nodes that you deploy to that public subnet won’t be assigned a public IP address and won’t be able to communicate with the cluster or other {aws} services. If the subnet was deployed before March 26, 2020 using either of the Amazon EKS {aws} CloudFormation VPC templates, or by using eksctl, then automatic public IP address assignment is disabled for public subnets. For information about how to enable public IP address assignment for a subnet, see Modifying the public IPv4 addressing attribute for your subnet. If the node is deployed to a private subnet, then it’s able to communicate with the cluster and other {aws} services through a NAT gateway.
If the subnets don’t have internet access, make sure that you’re aware of the considerations and extra steps in Deploy private clusters with limited internet access.
If you select {aws} Outposts, Wavelength, or Local Zone subnets, the subnets must not have been passed in when you created the cluster.

Select your desired choices on the Configure stack options page, and then choose Next.
Select the check box to the left of I acknowledge that {aws} CloudFormation might create IAM resources., and then choose Create stack.
When your stack has finished creating, select it in the console and choose Outputs.
Record the NodeInstanceRole for the node group that was created. You need this when you configure your Amazon EKS nodes.

Step 2: Enable nodes to join your cluster

Note	If you launched nodes inside a private VPC without outbound internet access, make sure to enable nodes to join your cluster from within the VPC.

Check to see if you already have an aws-auth ConfigMap.
```
kubectl describe configmap -n kube-system aws-auth
```

If you are shown an aws-auth ConfigMap, then update it as needed.

Open the ConfigMap for editing.

kubectl edit -n kube-system configmap/aws-auth

Add a new mapRoles entry as needed. Set the rolearn value to the NodeInstanceRole value that you recorded in the previous procedure.

[...]
data:
  mapRoles: |
    - rolearn: <ARN of instance role (not instance profile)>
      username: system:node:{{EC2PrivateDNSName}}
      groups:
        - system:bootstrappers
        - system:nodes
[...]

Save the file and exit your text editor.

If you received an error stating "Error from server (NotFound): configmaps "aws-auth" not found, then apply the stock ConfigMap.
1. Download the configuration map.
  curl -O https://s3.us-west-2.amazonaws.com/amazon-eks/cloudformation/2020-10-29/aws-auth-cm.yaml
2. In the aws-auth-cm.yaml file, set the rolearn value to the NodeInstanceRole value that you recorded in the previous procedure. You can do this with a text editor, or by replacing my-node-instance-role and running the following command:
  sed -i.bak -e 's|<ARN of instance role (not instance profile)>|my-node-instance-role|' aws-auth-cm.yaml
3. Apply the configuration. This command may take a few minutes to finish.
  kubectl apply -f aws-auth-cm.yaml
Watch the status of your nodes and wait for them to reach the Ready status.
```
kubectl get nodes --watch
```
Enter Ctrl+C to return to a shell prompt.

Note
If you receive any authorization or resource type errors, see [unauthorized] in the troubleshooting topic.

If nodes fail to join the cluster, then see [worker-node-fail] in the Troubleshooting chapter.
(GPU nodes only) If you chose a GPU instance type and the Amazon EKS optimized accelerated AMI, you must apply the NVIDIA device plugin for Kubernetes as a DaemonSet on your cluster. Replace vX.X.X with your desired NVIDIA/k8s-device-plugin version before running the following command.
```
kubectl apply -f https://raw.githubusercontent.com/NVIDIA/k8s-device-plugin/vX.X.X/deployments/static/nvidia-device-plugin.yml
```

Step 3: Additional actions

(Optional) Deploy a sample application to test your cluster and Linux nodes.
(Optional) If the AmazonEKS_CNI_Policy managed IAM policy (if you have an IPv4 cluster) or the AmazonEKS_CNI_IPv6_Policy (that you created yourself if you have an IPv6 cluster) is attached to your Amazon EKS node IAM role, we recommend assigning it to an IAM role that you associate to the Kubernetes aws-node service account instead. For more information, see [cni-iam-role].
We recommend blocking Pod access to IMDS if the following conditions are true:
- You plan to assign IAM roles to all of your Kubernetes service accounts so that Pods only have the minimum permissions that they need.
- No Pods in the cluster require access to the Amazon EC2 instance metadata service (IMDS) for other reasons, such as retrieving the current {aws} Region.
For more information, see Restrict access to the instance profile assigned to the worker node.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!