Nargott
diff --git a/‎filesystems/espfs/README.md
Lines changed: 1 addition & 1 deletion b/‎filesystems/espfs/README.md
Lines changed: 1 addition & 1 deletion
diff --git a/‎hardware/rtc/ds1307.c
Lines changed: 136 additions & 0 deletions b/‎hardware/rtc/ds1307.c
Lines changed: 136 additions & 0 deletions
diff --git a/‎sntp/fragments/sntp.c
Lines changed: 20 additions & 0 deletions b/‎sntp/fragments/sntp.c
Lines changed: 20 additions & 0 deletions
@@ -10,7 +10,7 @@ Primarily, we use flash memory mapping to access the data as opposed to individu
 and the primary intent, a new method was added with the signature:
 
 ```
-int espFsAccess(EspFsFile *fh, char *buf, size_t *len)
+int espFsAccess(EspFsFile *fh, void **buf, size_t *len)
 ```
 This function returns a pointer to the whole content of the file which is stored in buf.  The
 
@@ -0,0 +1,136 @@
+#include <apps/sntp/sntp.h>
+#include <driver/i2c.h>
+#include <esp_log.h>
+#include <freertos/FreeRTOS.h>
+#include <freertos/task.h>
+#include <lwip/sockets.h>
+#include <stdio.h>
+#include <time.h>
+
+#include "sdkconfig.h"
+
+#define SDA_PIN 18
+#define SCL_PIN 19
+#define DS1307_ADDRESS 0x68
+
+static char tag[] = "ds1307";
+
+static uint8_t intToBCD(uint8_t num) {
+	return ((num / 10) << 4) | (num%10);
+}
+
+static uint8_t bcdToInt(uint8_t bcd) {
+	// 0x10
+	return ((bcd >> 4) * 10) + (bcd & 0x0f);;
+}
+
+static void startSNTP() {
+	ip_addr_t addr;
+	sntp_setoperatingmode(SNTP_OPMODE_POLL);
+	inet_pton(AF_INET, "129.6.15.28", &addr);
+	sntp_setserver(0, &addr);
+	sntp_init();
+}
+
+
+static void initI2C() {
+	i2c_config_t conf;
+	conf.mode = I2C_MODE_MASTER;
+	conf.sda_io_num = SDA_PIN;
+	conf.scl_io_num = SCL_PIN;
+	conf.sda_pullup_en = GPIO_PULLUP_ENABLE;
+	conf.scl_pullup_en = GPIO_PULLUP_ENABLE;
+	conf.master.clk_speed = 100000;
+	ESP_ERROR_CHECK(i2c_param_config(I2C_NUM_0, &conf));
+	ESP_ERROR_CHECK(i2c_driver_install(I2C_NUM_0, I2C_MODE_MASTER, 0, 0, 0));
+}
+
+/*
+ * The value read from the DS1307 is 7 bytes encoded in BCD:
+ * 0 - Seconds - 00-59
+ * 1 - Minutes - 00-59
+ * 2 - Hours   - 00-23
+ * 3 - Day     - 01-07
+ * 4 - Date    - 01-31
+ * 5 - Month   - 01-12
+ * 6 - Year    - 00-99
+ *
+ */
+time_t readValue() {
+	i2c_cmd_handle_t cmd = i2c_cmd_link_create();
+	ESP_ERROR_CHECK(i2c_master_start(cmd));
+	ESP_ERROR_CHECK(i2c_master_write_byte(cmd, (DS1307_ADDRESS << 1) | I2C_MASTER_WRITE, 1 /* expect ack */));
+	ESP_ERROR_CHECK(i2c_master_write_byte(cmd, 0x0, 1));
+	ESP_ERROR_CHECK(i2c_master_start(cmd));
+	ESP_ERROR_CHECK(i2c_master_write_byte(cmd, (DS1307_ADDRESS << 1) | I2C_MASTER_READ, 1 /* expect ack */));
+	uint8_t data[7];
+	ESP_ERROR_CHECK(i2c_master_read(cmd, data, 7, 0));
+	ESP_ERROR_CHECK(i2c_master_stop(cmd));
+	ESP_ERROR_CHECK(i2c_master_cmd_begin(I2C_NUM_0, cmd, 1000/portTICK_PERIOD_MS));
+	i2c_cmd_link_delete(cmd);
+
+	int i;
+	for (i=0; i<7; i++) {
+		ESP_LOGD(tag, "%d: 0x%.2x", i, data[i]);
+	}
+
+	struct tm tm;
+	tm.tm_sec  = bcdToInt(data[0]);
+	tm.tm_min  = bcdToInt(data[1]);
+	tm.tm_hour = bcdToInt(data[2]);
+	tm.tm_mday = bcdToInt(data[4]);
+	tm.tm_mon  = bcdToInt(data[5]) - 1; // 0-11 - Note: The month on the DS1307 is 1-12.
+	tm.tm_year = bcdToInt(data[6]) + 100; // Years since 1900
+	time_t readTime = mktime(&tm);
+	return readTime;
+}
+
+void writeValue(time_t newTime) {
+	ESP_LOGD(tag, ">> writeValue: %ld", newTime);
+	struct tm tm;
+	gmtime_r(&newTime, &tm);
+	char buf[30];
+	ESP_LOGD(tag, " - %s", asctime_r(&tm, buf));
+
+	esp_err_t errRc;
+	i2c_cmd_handle_t cmd = i2c_cmd_link_create();
+	ESP_ERROR_CHECK(i2c_master_start(cmd));
+	ESP_ERROR_CHECK(i2c_master_write_byte(cmd, (DS1307_ADDRESS << 1) | I2C_MASTER_WRITE, 1 /* expect ack */));
+	ESP_ERROR_CHECK(i2c_master_write_byte(cmd, 0x0, 1));
+	ESP_ERROR_CHECK(i2c_master_write_byte(cmd, intToBCD(tm.tm_sec), 1));      // seconds
+	ESP_ERROR_CHECK(i2c_master_write_byte(cmd, intToBCD(tm.tm_min), 1 ));     // minutes
+	ESP_ERROR_CHECK(i2c_master_write_byte(cmd, intToBCD(tm.tm_hour), 1 ));    // hours
+	ESP_ERROR_CHECK(i2c_master_write_byte(cmd, intToBCD(tm.tm_wday+1), 1 ));  // week day
+	ESP_ERROR_CHECK(i2c_master_write_byte(cmd, intToBCD(tm.tm_mday), 1));     // date of month
+	ESP_ERROR_CHECK(i2c_master_write_byte(cmd, intToBCD(tm.tm_mon+1), 1));    // month
+	ESP_ERROR_CHECK(i2c_master_write_byte(cmd, intToBCD(tm.tm_year-100), 1)); // year
+	ESP_ERROR_CHECK(i2c_master_stop(cmd));
+	errRc = i2c_master_cmd_begin(I2C_NUM_0, cmd, 1000/portTICK_PERIOD_MS);
+	if (errRc != 0) {
+		ESP_LOGE(tag, "i2c_master_cmd_begin: %d", errRc);
+	}
+	i2c_cmd_link_delete(cmd);
+}
+
+void task_ds1307(void *ignore) {
+	int doWrite = 1;
+	ESP_LOGD(tag, ">> ds1307");
+	initI2C();
+	if (doWrite) {
+		startSNTP();
+		time_t t;
+		while(time(&t) < 1000) {
+			ESP_LOGD(tag, "Waiting for SNTP ...");
+			vTaskDelay(1000/portTICK_PERIOD_MS);
+		}
+		writeValue(t);
+	}
+
+	while(1) {
+		time_t t = time(NULL);
+		ESP_LOGD(tag, "time: %ld", t);
+		t = readValue();
+		ESP_LOGD(tag, "Read from DS1307: %ld", t);
+		vTaskDelay(1000/portTICK_PERIOD_MS);
+	}
+}
@@ -0,0 +1,20 @@
+#include <esp_log.h>
+#include <freertos/FreeRTOS.h>
+#include <freertos/task.h>
+#include <time.h>
+#include <apps/sntp/sntp.h>
+#include <lwip/sockets.h>
+#include <sys/time.h>
+#include "sdkconfig.h"
+
+/*
+ * Connect to an Internet time server to get the current date and
+ * time.
+ */
+void startSNTP() {
+	ip_addr_t addr;
+	sntp_setoperatingmode(SNTP_OPMODE_POLL);
+	inet_pton(AF_INET, "129.6.15.28", &addr);
+	sntp_setserver(0, &addr);
+	sntp_init();
+}