Code Examples for AURIX™ Development Studio

Hundreds of code examples are available for AURIX™ devices in this repository.
Each code example is made up of two parts: the source code and the corresponding tutorial.

To import a code example into AURIX™ Development Studio, follow the guide at the end on this page.

NOTE: For any question or request, please use the dedicated Infineon AURIX™ forum.

Topics

The topics covered by the code examples stored in this repository are the following, divided per macro category:

Communication Protocols	Data Handling	Timers	Analog/Digital Signals	CPU Management	Alarms, Interrupts and Resets
ASCLIN module handling for LIN, UART and SPI	Flexible CRC Engine control	Capture and Compare Unit control	Versatile Analog-to-Digital converter control	Assembly code execution	Device Reset type trigger and detection
Ethernet communication	Input-Output Monitor control	Clock System	Delta-Sigma Analog-to-Digital converter control	Code execution from SRAM	Interrupt handling
I2C communication	BUS register protection	General Purpose Timer control	GPIO port control	Performance registers usage	Safety Management Unit control
CAN communication	Memory Protection control	Generic Timer Module control		Power Management System control
SPI communication	Data and Program Flash programming	System Timer Module control		Multicore
	DMA control			Trap recognition
	Memory test			Watchdog handling

Source code

The source code of each code example is based on Infineon Low Level Drivers (iLLDs), for which the documentation can be found on the top right of this webpage.

Each code example is provided with a comment section called "metadata" in the Cpu0_Main.c file, which include:

Title: the title of the code example
Abstract: a short description of the example’s scope
Description: a detailed description of the example’s scope
Name: the example’s univocal name
Version: the version number of the example (V<major changes>.<minor changes>.<bugfixes> e.g. V1.0.2)
Board: a list of boards supported by the code
Keywords: a list of keywords used to ease the search
Documents: a list of links to documents useful for the code example
Last Updated: date of the last modification

e.g.:

Name

The name of each code example follows a specific naming scheme:

e.g. : ADC_Filtering_1_KIT_TC375_LK

where:

The code name summarizes in a couple of words the scope and the module used in the example
The ID number is an identification number for the example scope (If the same scope would be achieved using different code, then the two code examples would be called _1 and _2 in order to differentiate them)
The board short name describes which board the example code has been developed for (using board-specific port pins such as LED, communication, etc.)

Board

The code examples supports the following types of boards:

In particular, the following boards are supported:

AURIX™ TC2xx Boards	# Code Examples	AURIX™ TC3xx Boards	# Code Examples
KIT_AURIX_TC234_TFT	~5	KIT_A2G_TC334_LITE	~60
KIT_AURIX_TC237_TFT	~5	KIT_A2G_TC367_5V_TFT	~5
KIT_AURIX_TC265_TFT	~5	KIT_A2G_TC375_ARD_SB	~5
KIT_AURIX_TC275_ARD_SB	~5	KIT_A2G_TC375_LITE	~60
KIT_AURIX_TC275_LITE	~60	KIT_A2G_TC377_5V_TFT	~5
KIT_AURIX_TC277_TFT	~5	KIT_A2G_TC387_5V_TFT	~5
KIT_AURIX_TC297_TFT	~60	KIT_A2G_TC397_5V_TFT	~60

Tutorial

Each code example is provided with a tutorial, which can be downloaded either directly following the link inside the metadata in the Source Code, or from here, where you can find a collection of all the released tutorials.

Each tutorial contains the following information:

Summary: An abstract and a detailed description of the example's scope
Introduction: A generic introduction on the used module and it main features
Hardware: The used hardware and how to configure it
Implementation: A detailed explanation of how to implement the module's configuration using iLLDs and exploits their features
Run and Test: The steps to follow to make sure the code is working properly and interact with it

How To Import

To import a code example, use the dedicated import function in AURIX™ Development Studio: File >> Import... >> Infineon >> "AURIX Development Studio Project", select "Infineon Code Examples Repository" and select the code example to be imported.

The same result can be achieved by clicking on "Import AURIX Project" in the Quick Links view of AURIX™ Development Studio: