Raspberry Pi 400 and Pi 500as a USB HID Keyboard & Mouse

Hook your Pi 400 up to your PC somehow, using a USB Type-C cable into the power port of the Pi. Anker make good ones- I used a 3m white one for my tests.

Our USB-C to USB-A is great if you're using a USB-A port (but make sure it's a high power one): https://shop.pimoroni.com/products/usb-c-to-usb-a-cable-1m-black

A Raspberry Pi Mouse is also supported if plugged in, eg: https://shop.pimoroni.com/products/raspberry-pi-mouse?variant=29390982119507

⚠️ The Pi 400 and Pi 500 are power hungry, in some cases your computer may not supply enough current, or trigger a low voltage warning.

You may need to inject additional power from an official supply, using something like this: https://thepihut.com/products/usb-c-data-power-splitter

Quickstart (Ish)

Add dtoverlay=dwc2 to /boot/config.txt

Reboot!

sudo modprobe libcomposite

Grab the latest pi400kb for your system from releases: https://github.com/Gadgetoid/pi400kb/releases

chmod +x pi400kb

sudo ./pi400kb

✨ YOUR PI 400 IS NOW A FREAKING KEYBOARD & MOUSE FOR YOUR PC WHAAAAT!? ✨

Your keyboard input will be detached from your Pi while it's forwarded to your host computer.

Press Ctrl + Raspberry to grab/release your keyboard and mouse, switching between local use and USB.

Press Ctrl + Shift + Raspberry (on the grabbed keyboard) to exit.

Mouse Support

Pi 400 KB supports the official Raspberry Pi Mouse VID:PID = 093a:2510 by default, but other mice should work.

Autostart

sudo cp pi400kb /usr/bin/pi400kb
sudo systemctl edit --force --full pi400kb.service

Add the contents of the pi400kb.service file.

Start the service and check its status:

sudo systemctl start pi400kb.service
sudo systemctl status pi400kb.service

Enable start on boot if it's okay:

sudo systemctl enable pi400kb.service

Finally copy pi400kb.conf into /etc/modules-load.d/:

sudo cp pi400kb.conf /etc/modules-load.d/

Building & Contributing

Building

sudo apt install libconfig-dev git cmake
git clone https://github.com/Gadgetoid/pi400kb
cd pi400kb
git submodule update --init
mkdir build
cd build
cmake ..
make

Building for Pi 500

Replace the cmake .. command above with:

cmake .. -DKEYBOARD_VID=0x2e8a -DKEYBOARD_PID=0x0010 -DKEYBOARD_DEV=/dev/input/by-id/usb-Raspberry_Pi_Ltd_Pi_500_Keyboard-event-kbd

(thanks to 57r31 for the above command)

Custom Mouse/Keyboard Devices

CMake accepts the following build arguments to customise the VID/PID and device path for the mouse/keyboard:

KEYBOARD_VID - Keyboard Vendor ID, default: 0x04d9
KEYBOARD_PID - Keyboard Product ID, default: 0x0007
KEYBOARD_DEV - Keyboard device path, default: /dev/input/by-id/usb-_Raspberry_Pi_Internal_Keyboard-event-kbd
MOUSE_VID - Mouse Vendor ID, default: 0x093a
MOUSE_PID - Mouse Product ID, default: 0x2510
MOUSE_DEV - Mouse device path, default: /dev/input/by-id/usb-PixArt_USB_Optical_Mouse-event-mouse

Supply these arguments when configuring with CMake, eg:

cmake .. -DMOUSE_DEV="/dev/input/by-id/usb-EndGameGear_XM1_Gaming_Mouse_0000000000000000-event-mouse" -DMOUSE_VID=0x3367 -DMOUSE_PID=0x1903

Info

This project started out life as a gist - https://gist.github.com/Gadgetoid/5a8ceb714de8e630059d30612503653f

Thank you to all the people who dropped by with kind words, suggestions and improvements.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Uh oh!

Uh oh!