CTHua
diff --git a/‎bugs.po
Lines changed: 32 additions & 24 deletions b/‎bugs.po
Lines changed: 32 additions & 24 deletions
diff --git a/‎c-api/code.po
Lines changed: 6 additions & 6 deletions b/‎c-api/code.po
Lines changed: 6 additions & 6 deletions
diff --git a/‎c-api/dict.po
Lines changed: 5 additions & 4 deletions b/‎c-api/dict.po
Lines changed: 5 additions & 4 deletions
diff --git a/‎c-api/exceptions.po
Lines changed: 6 additions & 6 deletions b/‎c-api/exceptions.po
Lines changed: 6 additions & 6 deletions
@@ -13,7 +13,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Python 3.11\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-08-04 00:16+0000\n"
+"POT-Creation-Date: 2023-02-07 00:17+0000\n"
 "PO-Revision-Date: 2022-08-31 12:34+0800\n"
 "Last-Translator: Steven Hsu <hsuhaochun@gmail.com>\n"
 "Language-Team: Chinese - TAIWAN (https://github.com/python/python-docs-zh-"
@@ -65,6 +65,14 @@ msgstr ""
 
 #: ../../bugs.rst:22
 msgid ""
+"You can also open a discussion item on our `Documentation Discourse forum "
+"<https://discuss.python.org/c/documentation/26>`_."
+msgstr ""
+"你也可以在我們的\\ `說明文件 Discourse 討論區 <https://discuss.python.org/c/documentation/26>`_\\ "
+"中新增一個討論事項。"
+
+#: ../../bugs.rst:25
+msgid ""
 "If you're short on time, you can also email documentation bug reports to "
 "docs@python.org (behavioral bugs can be sent to python-list@python.org). "
 "'docs@' is a mailing list run by volunteers; your request will be noticed, "
@@ -74,58 +82,58 @@ msgstr ""
 "（程式碼執行的錯誤可以寄到 python-list@python.org）。「docs@」是一個由志工們"
 "所運行的郵寄清單；您的請求會被注意到，但可能需要一些時間才會被處理。"
 
-#: ../../bugs.rst:30
+#: ../../bugs.rst:33
 msgid "`Documentation bugs`_"
 msgstr "`說明文件錯誤`_"
 
-#: ../../bugs.rst:30
+#: ../../bugs.rst:33
 msgid ""
 "A list of documentation bugs that have been submitted to the Python issue "
 "tracker."
 msgstr "一系列已被提交至 Python 問題追蹤系統的有關說明文件的錯誤。"
 
-#: ../../bugs.rst:33
+#: ../../bugs.rst:36
 msgid "`Issue Tracking <https://devguide.python.org/tracker/>`_"
 msgstr "`問題追蹤系統 <https://devguide.python.org/tracker/>`_"
 
-#: ../../bugs.rst:33
+#: ../../bugs.rst:36
 msgid ""
 "Overview of the process involved in reporting an improvement on the tracker."
 msgstr "在追蹤系統上回報改進建議的過程簡介。"
 
-#: ../../bugs.rst:36
+#: ../../bugs.rst:39
 msgid ""
 "`Helping with Documentation <https://devguide.python.org/docquality/#helping-"
 "with-documentation>`_"
 msgstr ""
 "`貢獻說明文件 <https://devguide.python.org/docquality/#helping-with-"
 "documentation>`_"
 
-#: ../../bugs.rst:36
+#: ../../bugs.rst:39
 msgid ""
 "Comprehensive guide for individuals that are interested in contributing to "
 "Python documentation."
 m
1CF5
sgstr "給有意成為 Python 說明文件貢獻者的綜合指南。"
 
-#: ../../bugs.rst:38
+#: ../../bugs.rst:41
 msgid ""
 "`Documentation Translations <https://devguide.python.org/documenting/"
 "#translating>`_"
 msgstr "`說明文件翻譯 <https://devguide.python.org/documenting/#translating>`_"
 
-#: ../../bugs.rst:39
+#: ../../bugs.rst:42
 msgid ""
 "A list of GitHub pages for documentation translation and their primary "
 "contacts."
 msgstr ""
 "一份 GitHub 網頁的清單，裡面有各個說明文件翻譯團隊的連結，以及他們的主要聯絡"
 "人。"
 
-#: ../../bugs.rst:45
+#: ../../bugs.rst:48
 msgid "Using the Python issue tracker"
 msgstr "使用 Python 問題追蹤系統"
 
-#: ../../bugs.rst:47
+#: ../../bugs.rst:50
 msgid ""
 "Issue reports for Python itself should be submitted via the GitHub issues "
 "tracker (https://github.com/python/cpython/issues). The GitHub issues "
@@ -136,7 +144,7 @@ msgstr ""
 "python/cpython/issues) 提交。這個 GitHub 問題追蹤系統提供了一個網頁表單，可以"
 "輸入並提交相關資訊給開發者。"
 
-#: ../../bugs.rst:52
+#: ../../bugs.rst:55
 msgid ""
 "The first step in filing a report is to determine whether the problem has "
 "already been reported.  The advantage in doing so, aside from saving the "
@@ -151,7 +159,7 @@ msgstr ""
 "本中修正了這個問題，也有可能需要更詳細的資訊（在這種情況下，如果可以，非常歡"
 "迎您提供資訊！）。要確認是否重複回報，請使用頁面頂端的搜尋框來搜尋追蹤系統。"
 
-#: ../../bugs.rst:59
+#: ../../bugs.rst:62
 msgid ""
 "If the problem you're reporting is not already in the list, log in to "
 "GitHub. If you don't already have a GitHub account, create a new account "
@@ -161,26 +169,26 @@ msgstr ""
 "如果您想回報的問題還沒有在問題列表出現過，請登入 GitHub。如果您還沒有 GitHub "
 "帳戶，請點選「Sign up」連結來建立一個新的帳戶。您無法以匿名方式提交錯誤報告。"
 
-#: ../../bugs.rst:64
+#: ../../bugs.rst:67
 msgid ""
 "Being now logged in, you can submit an issue. Click on the \"New issue\" "
 "button in the top bar to report a new issue."
 msgstr ""
 "如果已經登入，那您就可以提交問題了。請點選列表頂端區域的「New issue」按鈕，來"
 "回報一個新的問題。"
 
-#: ../../bugs.rst:67
+#: ../../bugs.rst:70
 msgid "The submission form has two fields, \"Title\" and \"Comment\"."
 msgstr "提交的表單中有兩個欄位，「Title」及「Comment」。"
 
-#: ../../bugs.rst:69
+#: ../../bugs.rst:72
 msgid ""
 "For the \"Title\" field, enter a *very* short description of the problem; "
 "less than ten words is good."
 msgstr ""
 "在「Title」欄位，輸入對該問題\\ *非常*\\ 簡短的描述；最好少於十個單字。"
 
-#: ../../bugs.rst:72
+#: ../../bugs.rst:75
 msgid ""
 "In the \"Comment\" field, describe the problem in detail, including what you "
 "expected to happen and what did happen.  Be sure to include whether any "
@@ -191,7 +199,7 @@ msgstr ""
 "確定說明中包含了涉及到的任何擴充模組，以及您當時所使用的硬體和軟體平台（視情"
 "況而定，可以附上版本資訊）。"
 
-#: ../../bugs.rst:77
+#: ../../bugs.rst:80
 msgid ""
 "Each issue report will be reviewed by a developer who will determine what "
 "needs to be done to correct the problem. You will receive an update each "
@@ -200,42 +208,42 @@ msgstr ""
 "每一份問題報告都會被一位開發人員查核，並由他決定要做出什麼變更來修正這個問"
 "題。每當該問題有修正動作時，您會收到更新回報。"
 
-#: ../../bugs.rst:86
+#: ../../bugs.rst:89
 msgid ""
 "`How to Report Bugs Effectively <https://www.chiark.greenend.org.uk/"
 "~sgtatham/bugs.html>`_"
 msgstr ""
 "`如何有效地回報錯誤 <https://www.chiark.greenend.org.uk/~sgtatham/bugs."
 "html>`_"
 
-#: ../../bugs.rst:85
+#: ../../bugs.rst:88
 msgid ""
 "Article which goes into some detail about how to create a useful bug report. "
 "This describes what kind of information is useful and why it is useful."
 msgstr ""
 "這篇文章詳細說明如何建立一份有用的錯誤報告。它描述了什麼樣的資訊是有用的，以"
 "及這些資訊為什麼有用。"
 
-#: ../../bugs.rst:89
+#: ../../bugs.rst:92
 msgid ""
 "`Bug Writing Guidelines <https://bugzilla.mozilla.org/page.cgi?id=bug-"
 "writing.html>`_"
 msgstr ""
 "`錯誤撰寫指南 <https://bugzilla.mozilla.org/page.cgi?id=bug-writing.html>`_"
 
-#: ../../bugs.rst:89
+#: ../../bugs.rst:92
 msgid ""
 "Information about writing a good bug report.  Some of this is specific to "
 "the Mozilla project, but describes general good practices."
 msgstr ""
 "撰寫一份優良錯誤報告的相關資訊。部分的文章內容是針對 Mozilla 專案，但它也描述"
 "了通用的好習慣。"
 
-#: ../../bugs.rst:95
+#: ../../bugs.rst:98
 msgid "Getting started contributing to Python yourself"
 msgstr "開始讓自己貢獻 Python"
 
-#: ../../bugs.rst:97
+#: ../../bugs.rst:100
 msgid ""
 "Beyond just reporting bugs that you find, you are also welcome to submit "
 "patches to fix them.  You can find more information on how to get started "
 
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Python 3.11\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-10-15 20:43+0000\n"
+"POT-Creation-Date: 2023-02-05 00:18+0000\n"
 "PO-Revision-Date: 2015-12-09 17:51+0000\n"
 "Last-Translator: Liang-Bo Wang <me@liang2.tw>\n"
 "Language-Team: Chinese - TAIWAN (https://github.com/python/python-docs-zh-"
@@ -105,36 +105,36 @@ msgstr ""
 msgid "Returns ``1`` if the function succeeds and 0 otherwise."
 msgstr ""
 
-#: ../../c-api/code.rst:82
+#: ../../c-api/code.rst:84
 msgid ""
 "Equivalent to the Python code ``getattr(co, 'co_code')``. Returns a strong "
 "reference to a :c:type:`PyBytesObject` representing the bytecode in a code "
 "object. On error, ``NULL`` is returned and an exception is raised."
 msgstr ""
 
-#: ../../c-api/code.rst:87
+#: ../../c-api/code.rst:89
 msgid ""
 "This ``PyBytesObject`` may be created on-demand by the interpreter and does "
 "not necessarily represent the bytecode actually executed by CPython. The "
 "primary use case for this function is debuggers and profilers."
 msgstr ""
 
-#: ../../c-api/code.rst:95
+#: ../../c-api/code.rst:97
 msgid ""
 "Equivalent to the Python code ``getattr(co, 'co_varnames')``. Returns a new "
 "reference to a :c:type:`PyTupleObject` containing the names of the local "
 "variables. On error, ``NULL`` is returned and an exception is raised."
 msgstr ""
 
-#: ../../c-api/code.rst:104
+#: ../../c-api/code.rst:106
 msgid ""
 "Equivalent to the Python code ``getattr(co, 'co_cellvars')``. Returns a new "
 "reference to a :c:type:`PyTupleObject` containing the names of the local "
 "variables that are referenced by nested functions. On error, ``NULL`` is "
 "returned and an exception is raised."
 msgstr ""
 
-#: ../../c-api/code.rst:113
+#: ../../c-api/code.rst:115
 msgid ""
 "Equivalent to the Python code ``getattr(co, 'co_freevars')``. Returns a new "
 "reference to a :c:type:`PyTupleObject` containing the names of the free "
 
@@ -9,7 +9,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Python 3.11\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-10-06 00:23+0000\n"
+"POT-Creation-Date: 2023-02-15 00:17+0000\n"
 "PO-Revision-Date: 2017-09-22 18:26+0000\n"
 "Last-Translator: Liang-Bo Wang <me@liang2.tw>\n"
 "Language-Team: Chinese - TAIWAN (https://github.com/python/python-docs-zh-"
@@ -98,9 +98,10 @@ msgstr ""
 
 #: ../../c-api/dict.rst:83
 msgid ""
-"Remove the entry in dictionary *p* with key *key*. *key* must be hashable; "
-"if it isn't, :exc:`TypeError` is raised. If *key* is not in the dictionary, :"
-"exc:`KeyError` is raised. Return ``0`` on success or ``-1`` on failure."
+"Remove the entry in dictionary *p* with key *key*. *key* must be :term:"
+"`hashable`; if it isn't, :exc:`TypeError` is raised. If *key* is not in the "
+"dictionary, :exc:`KeyError` is raised. Return ``0`` on success or ``-1`` on "
+"failure."
 msgstr ""
 
 #: ../../c-api/dict.rst:91
 
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Python 3.11\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-10-15 20:43+0000\n"
+"POT-Creation-Date: 2023-02-13 00:17+0000\n"
 "PO-Revision-Date: 2018-05-23 14:05+0000\n"
 "Last-Translator: Adrian Liaw <adrianliaw2000@gmail.com>\n"
 "Language-Team: Chinese - TAIWAN (https://github.com/python/python-docs-zh-"
@@ -235,7 +235,7 @@ msgstr ""
 
 #: ../../c-api/exceptions.rst:200 ../../c-api/exceptions.rst:208
 #: ../../c-api/exceptions.rst:217 ../../c-api/exceptions.rst:225
-#: ../../c-api/exceptions.rst:234 ../../c-api/exceptions.rst:243
+#: ../../c-api/exceptions.rst:233 ../../c-api/exceptions.rst:243
 msgid ":ref:`Availability <availability>`: Windows."
 msgstr ":ref:`適用 <availability>`：Windows。"
 
@@ -763,8 +763,8 @@ msgstr ""
 
 #: ../../c-api/exceptions.rst:735
 msgid ""
-"Get the *start* attribute of the given exception object and place it into *"
-"\\*start*.  *start* must not be ``NULL``.  Return ``0`` on success, ``-1`` "
+"Get the *start* attribute of the given exception object and place it into "
+"*\\*start*.  *start* must not be ``NULL``.  Return ``0`` on success, ``-1`` "
 "on failure."
 msgstr ""
 
@@ -776,8 +776,8 @@ msgstr ""
 
 #: ../../c-api/exceptions.rst:750
 msgid ""
-"Get the *end* attribute of the given exception object and place it into *"
-"\\*end*.  *end* must not be ``NULL``.  Return ``0`` on success, ``-1`` on "
+"Get the *end* attribute of the given exception object and place it into "
+"*\\*end*.  *end* must not be ``NULL``.  Return ``0`` on success, ``-1`` on "
 "failure."
 msgstr ""