auto_cpufreq/power_helper.py

# * add status as one of the available options
# * alert user on snap if detected and how to remove first time live/stats message starts
# * if daemon is disabled and auto-cpufreq is removed (snap) remind user to enable it back
import click
from shutil import which
from subprocess import call, DEVNULL, getoutput, STDOUT
from sys import argv

from auto_cpufreq.core import *
from auto_cpufreq.globals import GITHUB, IS_INSTALLED_WITH_SNAP
from auto_cpufreq.tlp_stat_parser import TLPStatusParser

# app_name var
app_name = "python3 power_helper.py" if argv[0] == "power_helper.py" else "auto-cpufreq"

def header(): print("\n------------------------- auto-cpufreq: Power helper -------------------------\n")
def warning(): print("\n----------------------------------- Warning -----------------------------------\n")

def helper_opts(): print("\nFor full list of options run: python3 power_helper.py --help")

# used to check if binary exists on the system
def does_command_exists(cmd): return which(cmd) is not None

bluetoothctl_exists = does_command_exists("bluetoothctl")
powerprofilesctl_exists = does_command_exists("powerprofilesctl")
systemctl_exists = does_command_exists("systemctl")
tlp_stat_exists = does_command_exists("tlp-stat")

# detect if gnome power profile service is running
if not IS_INSTALLED_WITH_SNAP:
    if systemctl_exists:
        try: gnome_power_status = call(["systemctl", "is-active", "--quiet", "power-profiles-daemon"])
        except:
            print("\nUnable to determine init system")
            print("If this causes any problems, please submit an issue:")
            print(GITHUB+"/issues")

# alert in case TLP service is running
def tlp_service_detect():
    if tlp_stat_exists:
        status_output = getoutput("tlp-stat -s")
        tlp_status = TLPStatusParser(status_output)
        if tlp_status.is_enabled():
            warning()
            print("Detected you are running a TLP service!")
            print("This daemon might interfere with auto-cpufreq which can lead to unexpected results.")
            print("We strongly encourage you to remove TLP unless you really know what you are doing.")

# alert about TLP when using snap
def tlp_service_detect_snap():
    warning()
    print("Unable to detect if you are using a TLP service!")
    print("This daemon might interfere with auto-cpufreq which can lead to unexpected results.")
    print("We strongly encourage you not to use TLP unless you really know what you are doing.")

# alert in case gnome power profile service is running
def gnome_power_detect():
    if systemctl_exists and not bool(gnome_power_status):
        warning()
        print("Detected running GNOME Power Profiles daemon service!")
        print("\nThis daemon might interfere with auto-cpufreq and will be automatically")
        print("disabled when auto-cpufreq daemon is installed and")
        print("it will be re-enabled after auto-cpufreq is removed.")
        
        print("\nOnly necessary to be manually done on Snap package installs!")
        print("Steps to perform this action using auto-cpufreq: power_helper script:")
        print(f"git clone {GITHUB}.git")
        print("cd auto-cpufreq/auto_cpufreq")
        print("python3 power_helper.py --gnome_power_disable")
        print(f"\nReference: {GITHUB}#configuring-auto-cpufreq")

# automatically disable gnome power profile service in case it's running during install
def gnome_power_detect_install():
    if systemctl_exists and not bool(gnome_power_status):
        warning()
        print("Detected running GNOME Power Profiles daemon service!")
        print("\nThis daemon might interfere with auto-cpufreq and has been disabled.\n")
        print('This daemon is not automatically disabled in "monitor" mode and')
        print("will be enabled after auto-cpufreq daemon is removed.")


# notification on snap
def gnome_power_detect_snap():
    warning()
    print("Due to Snap package confinement limitations please consider installing auto-cpufreq using")
    print(f"auto-cpufreq-installer: {GITHUB}#auto-cpufreq-installer")
    print()
    print("Unable to detect state of GNOME Power Profiles daemon service!")
    print("This daemon might interfere with auto-cpufreq and should be disabled!")
    print("\nSteps to perform this action using auto-cpufreq: power_helper script:")
    print(f"git clone {GITHUB}.git")
    print("cd auto-cpufreq/auto_cpufreq")
    print("python3 power_helper.py --gnome_power_disable")
    print(f"\nReference: {GITHUB}#configuring-auto-cpufreq")

# stops gnome >= 40 power profiles (live)
def gnome_power_stop_live():
    if systemctl_exists and not bool(gnome_power_status) and powerprofilesctl_exists:
        call(["powerprofilesctl", "set", "balanced"])
        call(["systemctl", "stop", "power-profiles-daemon"])

# starts gnome >= 40 power profiles (live)
def gnome_power_start_live():
    if systemctl_exists: call(["systemctl", "start", "power-profiles-daemon"])

# enable gnome >= 40 power profiles (uninstall)
def gnome_power_svc_enable():
    if systemctl_exists:
        try:
            print("* Enabling GNOME power profiles\n")
            call(["systemctl", "unmask", "power-profiles-daemon"])
            call(["systemctl", "start", "power-profiles-daemon"])
            call(["systemctl", "enable", "power-profiles-daemon"])
            call(["systemctl", "daemon-reload"])
        except:
            print("\nUnable to enable GNOME power profiles")
            print("If this causes any problems, please submit an issue:")
            print(GITHUB+"/issues")

# gnome power profiles current status
def gnome_power_svc_status():
    if systemctl_exists:
        try:
            print("* GNOME power profiles status")
            call(["systemctl", "status", "power-profiles-daemon"])
        except:
            print("\nUnable to see GNOME power profiles status")
            print("If this causes any problems, please submit an issue:")
            print(GITHUB+"/issues")

# disable bluetooth on boot
def bluetooth_disable():
    if IS_INSTALLED_WITH_SNAP: bluetooth_notif_snap()
    elif bluetoothctl_exists:
        print("* Turn off bluetooth on boot (can be turned on any time later on!)")
        btconf = Path("/etc/bluetooth/main.conf")
        try:
            orig_set = "AutoEnable=true"
            change_set = "AutoEnable=false"
            with btconf.open(mode="r+") as f:
                content = f.read()
                f.seek(0)
                f.truncate()
                f.write(content.replace(orig_set, change_set))
        except Exception as e: print(f"\nERROR:\nWas unable to turn off bluetooth on boot\n{repr(e)}")
    else: print("* Turn off bluetooth on boot [skipping] (package providing bluetooth access is not present)")

# enable bluetooth on boot
def bluetooth_enable():
    if IS_INSTALLED_WITH_SNAP: bluetooth_on_notif_snap()
    if bluetoothctl_exists:
        print("* Turn on bluetooth on boot")
        btconf = "/etc/bluetooth/main.conf"
        try:
            orig_set = "AutoEnable=true"
            change_set = "AutoEnable=false"
            with open(btconf, "r+") as f:
                content = f.read()
                f.seek(0)
                f.truncate()
                f.write(content.replace(change_set, orig_set))
        except Exception as e: print(f"\nERROR:\nWas unable to turn on bluetooth on boot\n{repr(e)}")
    else: print("* Turn on bluetooth on boot [skipping] (package providing bluetooth access is not present)")

# turn off bluetooth on snap message
def bluetooth_notif_snap():
    print("\n* Unable to turn off bluetooth on boot due to Snap package restrictions!")
    print("\nSteps to perform this action using auto-cpufreq: power_helper script:")
    print("python3 power_helper.py --bluetooth_boot_off")

# turn off bluetooth on snap message
def bluetooth_on_notif_snap():
    print("\n* Unable to turn on bluetooth on boot due to Snap package restrictions!")
    print("\nSteps to perform this action using auto-cpufreq: power_helper script:")
    print("python3 power_helper.py --bluetooth_boot_on")

# gnome power removal reminder
def gnome_power_rm_reminder():
    if systemctl_exists and bool(gnome_power_status):
        warning()
        print("Detected GNOME Power Profiles daemon service is stopped!")
        print("This service will now be enabled and started again.\n")


def gnome_power_rm_reminder_snap():
    warning()
    print("Unable to detect state of GNOME Power Profiles daemon service!")
    print("Now it's recommended to enable this service.")
    print("\nSteps to perform this action using auto-cpufreq: power_helper script:")
    print(f"git clone {GITHUB}.git")
    print("cd auto-cpufreq/auto_cpufreq")
    print("python3 power_helper.py --gnome_power_enable")
    print(f"\nReference: {GITHUB}#configuring-auto-cpufreq")

def valid_options():
    print("--gnome_power_enable\t\tEnable GNOME Power Profiles daemon")
    print("--gnome_power_disable\t\tDisable GNOME Power Profiles daemon\n")

def disable_power_profiles_daemon():
    # always disable power-profiles-daemon
    try:
        print("\n* Disabling GNOME power profiles")
        call(["systemctl", "stop", "power-profiles-daemon"])
        call(["systemctl", "disable", "power-profiles-daemon"])
        call(["systemctl", "mask", "power-profiles-daemon"])
        call(["systemctl", "daemon-reload"])
    except:
        print("\nUnable to disable GNOME power profiles")
        print("If this causes any problems, please submit an issue:")
        print(GITHUB+"/issues")

# default gnome_power_svc_disable func (balanced)
def gnome_power_svc_disable():
    snap_pkg_check = 0
    if systemctl_exists:
        if bool(gnome_power_status):
            try:
                # check if snap package installed
                snap_pkg_check = call(['snap', 'list', '|', 'grep', 'auto-cpufreq'], 
                stdout=DEVNULL,
                stderr=STDOUT)
                # check if snapd is present and if snap package is installed | 0 is success
                if not bool(snap_pkg_check):
                    print("GNOME Power Profiles Daemon is already disabled, it can be re-enabled by running:\n"
                        "sudo python3 power_helper.py --gnome_power_enable\n"
                    )
                elif snap_pkg_check == 1:
                    print("auto-cpufreq snap package not installed\nGNOME Power Profiles Daemon should be enabled. run:\n\n"
                        "sudo python3 power_helper.py --gnome_power_enable"
                    )
            except:
                # snapd not found on the system
                print("There was a problem, couldn't determine GNOME Power Profiles Daemon")
                snap_pkg_check = 0

        if snap_pkg_check == 1:
            if not bool(gnome_power_status) and powerprofilesctl_exists:
                print("auto-cpufreq snap package not installed.\nGNOME Power Profiles Daemon should be enabled, run:\n\n"
                    "sudo python3 power_helper.py --gnome_power_enable"
                )
            else:
                print("auto-cpufreq snap package installed, GNOME Power Profiles Daemon should be disabled.\n")
                print("Using profile: ", "balanced")
                call(["powerprofilesctl", "set", "balanced"])

                disable_power_profiles_daemon()

# cli
@click.command()
#@click.option("--gnome_power_disable", help="Disable GNOME Power profiles service (default: balanced), reference:\n https://bit.ly/3bjVZW1", type=click.Choice(['balanced', 'performance'], case_sensitive=False))
@click.option("--gnome_power_disable", is_flag=True, help="Disable GNOME Power profiles service")
# ToDo:
# * update readme/docs
@click.option("--gnome_power_enable", is_flag=True, help="Enable GNOME Power profiles service")

@click.option("--gnome_power_status", is_flag=True, help="Get status of GNOME Power profiles service")
@click.option("--bluetooth_boot_on", is_flag=True, help="Turn on Bluetooth on boot")
@click.option("--bluetooth_boot_off", is_flag=True, help="Turn off Bluetooth on boot")
def main(
    gnome_power_enable,
    gnome_power_disable,
    gnome_power_status,
    bluetooth_boot_off,
    bluetooth_boot_on,
):
    root_check()
    header()

    if len(argv) == 1: print('Unrecognized option!\n\nRun: "' + app_name + ' --help" for list of available options.')
    else:
        if gnome_power_enable: gnome_power_svc_enable()
        elif gnome_power_disable: gnome_power_svc_disable()
        elif gnome_power_status: gnome_power_svc_status()
        elif bluetooth_boot_off: bluetooth_disable()
        elif bluetooth_boot_on: bluetooth_enable()
        helper_opts()

    footer()

if __name__ == "__main__": main()